Gotta remember to rotate the camshaft to a flat end so the cam follower goes all the way in

@davidescobedo1317

3 жыл бұрын

Wait what

@Gunflame

3 жыл бұрын

Uhhhh, no

Great tutorial, I replaced my cam follower on my 2008 GTI after 106,000 miles. I know that's way too long to leave it - luckily there was minimal wear. Thanks 👍🏼

@bonnorbassidy8198

2 жыл бұрын

Mine just went out on the freeway with 127k miles :) pretty sure that’s what happened. Or the fuel pump

Perfect timing! I've been needing to change my cam follower and install my CTS Turbo intake as well. Thanks for the video!

@ModernEngineer

7 жыл бұрын

Glad I could help! Thanks for watching!

Just got a MK6 R in September. Love the car, it's Stage 2+ with APR FMIC, HPFP, APR full RSC exhaust but customized by Corsa Exhaust in Berea, Ohio. They used my car to create the RSC exhaust when they teamed up with Corsa. Corsa specializes in corvettes mainly. Gonna attempt this today as it's around 50 degrees in Cleveland. Wish me luck

Great tutorial, thanks man!

where did u get the that rubber? mine comes without.

So you don't have to change it on the TFSI ones?

Very nice tutorial. FYI, the torque spec for the three bolts is only 7 ft/lbs. So it just makes sense to use a suitable torque wrench. Also fyi, I installed a LOBA hpfp, and so was in contact with the company wherein I was told that in testing the pump design it was removed at least 50 times and the same bolts were used repeatedly. As it it, I have a new kit with new bolts (anyway?).

@ModernEngineer

7 жыл бұрын

longbowdt thanks for the correction. My comment regarding the stud conversion was more toward saving the aluminum threads, not the bolts. Paul, over at DAP, would have more information regarding that. Thanks for watching!

@longbowdt

7 жыл бұрын

I understood about the bolts.I should have been more clear as well. LOBA installed the same bolts into the same pump mounting repeatedly with no issues. I was only stressing that it's more important to use the proper torque specs. As I said I have new bolts with my kit. Of course I'll inspect them to see if the are clean and not fouled with aluminum from the housing. Yours is still a very good video tutorial and I appreciate your sharing it with the community.

Thank you Omega Amigo Matt! 👍

what are those two black hoses ? Thanks

I think they updated the alloy for the cam follower and now it's far more robust than before. Changing it every 10k miles is a bit unnessecery, imho. Some people would change it if there is the slightest discoloring in the black paint thing...

What make you change it ?

I just came across this video, wanted to ask before buying my golf R tomorrow... The golf R I have has an aftermarket APR High Pressure Fuel Pump in it already, do I need to worry about it in the aftermarket part?

@twintipnation2758

4 жыл бұрын

Yes. You should check it every 10 or 20K miles.

Ive owned my mk5 gti for 2 years (about 10k miles) and I should probably do this :o don't know if the previous owner ever changed it lol

Its only on Turbo FSI's isnt? My FSI (non-Turbo) looks another... or im wrong ?

Hey, man, I got a problem with my car. my vehicle is an Octavia with a 1.6 fsi engine. I'm driving down the road in my car, and he cuts off gas. the gas needle is fluctuating and the engine stops. the computer shows error code p2293. Service officials say the problem is caused by a high pressure pump. however, since the problem is not always experienced, I think there may be a problem with another equipment. I care about your ideas, and I await your answer.

Does 1.6 FSI engine has this problems?

I have an 09 gti. Does that use a cam follower? Some people are saying it doesn’t. I want to make sure

I'm not sure if it's made for the VW 2.0T FSI engine or not but I see Cam Followers with a roller on the end that meets against the Cam, So maybe less Ware & Tare on the Cam , If I can find that type of Cam Follower for the VW FSI 2.0T would you recommend it ? Part# HITACHI FUP3058

Quando deve se mudar cam follower cada 10.000 ou cada 20.000 km ?

Hi mate I’m getting a whining noise for me s3 8p engine on idle been told will the cam follower wot would u say mate if any ideas

Great job

What parts number?. ..gti 6,thanks.

At how many miles do you need to change camfollower on 2008 Audi a4 2.0 fsi ?

If I’m getting no acceleration do I think it’s my hpfp

Did mine last night but mine's the 55 plate MKV so it had the banjo bolt :/

Were can buy oring bought kit online didn't come with ring for fuel pump???

@ModernEngineer

6 жыл бұрын

Alyssa Haywood ecs tuning sells them.

What does it mean if there's no pressure or any fuel that came out of the pressure valve

@michaelpeterson5801

6 жыл бұрын

Jose Gutierrez bad lift pump "in tank pump"

How do you keep your engine bay so clean? Really trying to find ways to clean my engine bay safely ideas? But awesome diy thanks

@Afc1987

6 жыл бұрын

Marcos Martinez steam cleaning the engine bay then cover the terminals

Nice tutorial! I have a question. I own a 2008 Audi A3 with 1.8 turbo engine. This car has the same problem? Thanks.

@dacarguru7983

6 жыл бұрын

1.8s never had came follower issues. You'll just have to worry about coil packs ;)

What was the torque setting for the 3 bolts.

@bobbyyurk6483

2 жыл бұрын

7ft/lbs for the three

@stuartwinstanley4949

2 жыл бұрын

@@bobbyyurk6483 thank you

How do I know is time to replace it ?

@ModernEngineer

5 жыл бұрын

victor v if you check it and the black surface is worn through I would replace it.

Aren't you mean to prime the pump with a few turns without starting it first?.

@ModernEngineer

6 жыл бұрын

Potentially... I didn't and everything seems to be OK. :)

@seanthomasrauchert1695

5 жыл бұрын

Also turn the crank depending on the position if on the high point of the cam tht makes it easier as well!

Easy peasy

Wow, that engine is so damn silent. My 8P S3 sounds like a diesel in comparison.

Mk6 Golf R is an FSI engine, Mk6 GTI is a TSI

EA113

what a pain in the ass i might just trade my mk6 for a mk7. Its also easier to change the oil on it.

why only 4 cam followers? they wasn t 16 ?

You should make the camera closer to that things sorry about learn how to make video if not as someone

.10 seconds of fame

@ModernEngineer

6 жыл бұрын

FastBatteryCharger what? Lol