Man those zip ties are super helpful! Great idea

Też właśnie ściągałem oponę łyżkami a zakładanie za pomocą opasek to jest właśnie super sprawa idzie szybko i bez problemowo. Spróbuj sobie spiąć oponę w np 4 różnych miejscach z odstępami jest owiele łatwiej założyć samymi rękami rąk zakładałem nie trzeba było nawet łyżki używać. Pozdrawiam

When handling the motor, i recommend using some work gloves. When pusing the tire on/off its easy to get cuts on knuckles and fingers on sharp brake rotor

Thank you Captain...very usefull video !

I got a feeling I'll need to know this...fast! Pablooooooooo! 😂🙏🏾

Thank you very much You helped me replace my tyre Thank you Sir ♥️🙏😊

Brooo best video ever on how to change a tire for a scooter. Been looking for something like this

I have the same scooter, I will never get those cheap tires ever again, what a nightmare getting them off and on, you got lucky, I learned alot from the first time, I used grease instead of soap to seal the beed... It wouldn't seal, I need to blast it with 130 psi so it would properly seal, I also recommend spending more money to get better tires with thick rubber and tiny spaces between the main tread, because you don't want to replace your tires ever again after doing it once lol

@8822fitzy

Ай бұрын

I'm starting to realize this

You are my scooter hero...love all your videos from new York.. .. where's Pablo...321...full throttle..holey shit...

Hi. The air nozzle broke completle off my rear motor, leaving a hole there and a flat tire. Now what? Do I now go to tubes and stick the nozzle through the hole on my rim? Puh...

that lever from decathlon works fine on the xiaomi m365, but for that beast you need a lot of force🤯

Hey I just noticed that I connected blue to blue . Green to green. Yellow to yellow. The scooter runs but I wonder if I’m damaging something?

Hi, like ur videos ur pretty technical, could you send me the link for the rear foot plateform. Thx

hey, great video 👍 can you please send the link to the offroad tires?

What size spanner for the wheel nut mate?

Do the Laotie Ti 30 tires have to be under pressure? if so how much?

I came back to your video and I still have this scooter. My back tire losing air and I even tried soap and water and not seeing leaks. It does lose air when I ride it and yes changing tire is a pain and next scooter I will buy is split rim tubeless tire. Dualtron is one of them

@PirateOnYoutube

6 ай бұрын

Maybe its just air valve insert

@AJCoReTV

5 ай бұрын

Does the new Yume Hawk pro have split rim? It says it has tubeless tires, but I can’t tell if rim is split.

hello sorry but what engines do you have on your ti30?... as far as I know the TI30 motors have the motor cable on the disc side.yours has it on the opposite side, could you tell me the code of the engines that you can't see from the video?

can anyone tell me who can i buy street tires and what i need to change from offroad to street tires 11inch tires off road i got now

For what you need lose two bolt?

so ive done all that but my tire isint holding air why ?

Mam pytanie. Koło od boyueda się rozkręca ? Masz gdzieś film na kanale jak wymieniasz wentyl ??? Mi ucieka powietrze bokiem wentyla…

Just a random question. I'm about to buy a used Laotie ES19 but want to change the tires to off-road knobbies. The only one's I can find are 10x3 rather than the stock 10x4.5 road tires. Do you think the narrower tires will fit?

@PirateOnYoutube

2 жыл бұрын

nah man , rim is tubeless. Ofcourse U can install tube and try it .

Did you deflate the tire?

Where u get lever from

Esos motores se abren para cambiar las ruedas

Though I may have to put my tyre into shop to take off, tried, no joy, watched your video after watching loads others and tried what you showed and the tyre is off, THANKS :)

@PirateOnYoutube

Жыл бұрын

🍕🍻

Can we install larger tires in front? I was thinking about PMT 100/55-65 Tyre.

@PirateOnYoutube

2 жыл бұрын

no idea

Bonjour il y a une chambre a air dans le pneu ?

Just did this by hand lmao I but switched to street tires and omg what a difference!! 110/50

@DiyNuke

2 жыл бұрын

in a good way i suppose? i just ordered an ti30 with road tires. i am also kinda looking for tires with the E-mark on then but i doubt they even exist

@antoniosoares9642

Жыл бұрын

Hi. Where have bought your tires (link)? Tx :)

@dwight_boi

Жыл бұрын

@@antoniosoares9642 Amazon I don’t have the link but type it on Amazon

@jpeero

14 күн бұрын

i just switched from road tires

Merci

Does this work on Laotie T30 not TI30 ?

Hi, Do you know if there are tubeless tires for the ES19? Thanks

@screwitimout4920

11 ай бұрын

Amazon put in your tire size

How u Get on dekk?

These tires changing look difficult, I might just ride with off road tires haha

What are the tools?

IT'S VERY HARD LIKE THAT THE SPLIT RIM IS GOO

Why not remove the motor from the wheel (6 bolts), slide the tire on and reattach the motor? No struggling trying to force the tire onto the rim, which could damage the rim. Works for me.

@PirateOnYoutube

Ай бұрын

there is no bolts

You mentioned at the end of this video that of you were to connect the wires the opposite that the motor would not spin. Wouldn't it go in the opposite direction with the polarity Reversed?

@PirateOnYoutube

3 жыл бұрын

Nope cause u got hall sensor so controller knows at what position is motor shaft and in what direction is rotate . Without hall it will work as you mentioned , ofcourse if controller middle 2nd wire will be connected to 2nd motor wire and by change outside wires u can change rotation

@robertopagan5809

3 жыл бұрын

@@PirateOnKZread have you ever made a video to do this change of rotation?

@Preputz

Жыл бұрын

Hey pirate, I slit my tire so i bought a new one and installed it as per your video, but now my motor won't spin. It 'works', just doesnt spin. Help please :(

All Laotie scooter have tubless tyres? For example Laotie es18 Lite have tubless tyres too?

@PirateOnYoutube

2 жыл бұрын

boyueda nad ti30 has tubeless

I changed the tyre successfully but i notice that air is leaking from where the rim and the tyre meet on both sides of the wheel. What should i do? I lose almost all the air within 24 hours

@screwitimout4920

11 ай бұрын

deflate the tire and push it inward to break the bead then clean it. you probably have dirt in the bead the mating materials needs to be clean to help make a good seal

I really want that handle you added to the fender. Did you print that? Can you sell me one?

@PirateOnYoutube

3 жыл бұрын

Here is Eshop pirate.ac/shop , tomorrow I will add Grip

@theplebreporter

3 жыл бұрын

@@PirateOnKZread I'm the guy who ordered today and asked for the extra handle 😅

@PirateOnYoutube

3 жыл бұрын

@@theplebreporter only you ;), belive me or not but it will be not that easy to damage 1st one :P

Hi where did you get that footplate from?

@PirateOnYoutube

2 жыл бұрын

here ;) pirate.ac/shop/product/foot-rest-ultimate-set-color-black/

Scusa ma che modello di laotie hai,perché a quanto so nel ti30 il cavo motore passa dal lato del disco ma tu lo hai dalla parte opposta come il boyueda... Mi potresti dire la sigla dei motori che dal video non si vedono

Bro what tools are you using?

@PirateOnYoutube

2 ай бұрын

Regular MTB stuff

you're damaging the rim of the hub. you'll have some issues on that in the future if you continue to put the tire that way.. best way which you almost made was using zip ties. tie the tire at least 4-5 times around. it will fit in easily just by pushing the tire in without using any tire levers..

@simoneors

2 жыл бұрын

true

@jansqa6971

2 жыл бұрын

@R0BL0X GAMES MASTER the only hard thing which you need an extra hand is the tying/applying the zip ties itself because those tubeless CST tires are thick and hard, so you'll need both of your hands to hold the tire and pinch together the tire beads when tying them up. so, someone's got to zip tie it all around. the closer the tire beads after zip tying it, the easier to push the tire to the hub. just don't forget to use thick zip ties or else the tire will just tear them up.

@kk-channel5699

2 жыл бұрын

OMG, you just saved me, I tried your idea and it just work so smooth

@jansqa6971

2 жыл бұрын

@@kk-channel5699 good to know. 👍

@thebigdogsmac11

2 жыл бұрын

@@jansqa6971 maybe put the tires in the sun to make them soft them try to put them on? With zipties

Tires from the links provided have different dimensions, the original is 100/65 6.5 - provided in the links have 90/65 6.5

@kk-channel5699

2 жыл бұрын

100/65 is kind of hard to find but, 90/65 will still fit, the 90 and 100 the difference is just the outer diameter, won’t effect to put it on, it’ll just tiny bit smaller

@marinostsali7131

2 жыл бұрын

@@kk-channel5699 I think 100 refers to tire width in mm so there wont be any problem

Powietrze ucieka mi bokiem wentyla…. Wiesz jaki wentyl siedzi w boyueda ? Może nagrasz jak się do niego dobrać bo widzę na grupie ze dużo ludzi ma problem z uciekającym powietrzem ;)

@PirateOnYoutube

2 жыл бұрын

wydaje mi sie ze to zwykly samochodowy

Whata nightmare.. Did you find any solid 10x3 tires?

@cunniffe6161

3 жыл бұрын

11 inch

✌️

Ooo😊

Jakaś rada jakie opony do janobike t10?

@PirateOnYoutube

2 жыл бұрын

Najlepsze :)

Hi Mr. Pirate. A question regarding the Boyueda Lower stem/T-post: have you ever disassembled one to change bearings in there? A friend of mine got a new Boyueda 5600w (its rebranded here in the Philippines) from a dealer and after a few months, the steering seized and now is hard to steer. He took it back to the dealers but it seems the whole stem assembly is in need of replacing. Is there a way to remove the t-post/steerer assembly from the stem in order to fix it? thank you.

@Postc0ital_mal0ne

3 жыл бұрын

Upvoted. Try emailing him. He replies quicker there.

@xXBassDriveXx

3 жыл бұрын

yea, i got a bit of play, and i want to know if it is still normal, mine is a FLJ SK3, but they are more or less all the same. Hopefully he reads this too. :)

@k0k0w

3 жыл бұрын

@@Postc0ital_mal0ne Thanks for the Tip

@ssab9063

3 жыл бұрын

@@xXBassDriveXx To limit the play in the stem tighten the screw under the red release flap.

@ssab9063

3 жыл бұрын

And these things aren't super complicated. Maybe try disassembling it for starters, it'd be pretty difficult to break the mechanical parts as long as your careful.

no inner tube?

@Anomyzer24

3 жыл бұрын

They are tubeless tires they dont use inner tubes

wait, those are tubeless?

Always remove the brake disk before doing this, they bend easy and you'll have to buy a new one

@PirateOnYoutube

2 жыл бұрын

You can easily bend it back ;)

@mrhow2712

2 жыл бұрын

@@PirateOnKZread you obviously never had this happen to you before. I work at a scooter repair shop, trust me you need a press machine to bend it back correctly, otherwise it will always have a slight bend and produce rubbing noise. The problem is that it will look straight to the human eye but not be

@PirateOnYoutube

2 жыл бұрын

Bro Really ? xD kzread.info/dash/bejne/aoyZqdCJlduso8Y.html ... maybe your shop should hire me ?

@DiyNuke

2 жыл бұрын

@@mrhow2712 dont forget that these are kinda thin compared to scooter brake calipers.

Estoy solo, como saco una tercera mano XD

@PirateOnYoutube

10 ай бұрын

Use your's BiG Foot 🤣🤣🍻

and this is how you bend your rotor.

@PirateOnYoutube

13 күн бұрын

actually you need much more than this ;)

Oh so it's not split rim

You really need more hands for such a primitive thing... OMg..

Haha 😂 Terrible man!

What a damn sham lol. Little did i know what i was getting myself into buying a tubeless 11 inch scooter. The tire change process is horrific. I have other scooters that i can do by myself in abt 20 mintues. This process is abysmal and damn near impossible w/o 2 ppl and w/o damaging motor wire. What a nightmare...no more tubeless for me.

This is an impossible task

"How to" something you never ever done in your life?

Instead of having to take the cover off every time to change the tire you can simply just remove the rim from the motor. This way you can do the tire change with the chord and the motor on the out of the way, and the rim anywhere you want.

@PirateOnYoutube

3 жыл бұрын

I can't im this motor, or i will not remove stator to change the tire xD

@ssab9063

3 жыл бұрын

@@PirateOnKZread What do you mean?

@PirateOnYoutube

3 жыл бұрын

@@ssab9063 You said, i should remove Rim from my Ti30 motor , how ?

@bertkristoforus6678

3 жыл бұрын

Yeah i think ur scooter has the split rims design so u can just split the rims and change the tire you dont even need the tire spoons

@bertkristoforus6678

3 жыл бұрын

You just need to take those 5 screws on the motor

I just can't get this tubless tyre on man... so fkn annoying

You didn’t show putting the tube in…

@PirateOnYoutube

2 жыл бұрын

There is no tube...

@AJ-dt8yo

2 жыл бұрын

@@PirateOnKZread so what was u pumping air into?

@PirateOnYoutube

2 жыл бұрын

@@AJ-dt8yo its tubeless

Air tires are for losers

Yeah....not for the faint hearted. You need big balls to do this on your own:|)