Thanks for watching, dont forget to share, like and subscribe!

It was funny watching you guys do the tires changes. There is no easy way if you don't have the proper tools required 😉

After watching 2 minutes of this, I’ll just pay a shop to do it. Thanks for the video.

There are easier ways to break the bead. You can use wood clamps or the jack and strap method.

When you had the bar on the back side was correct for the last bead .you put pressure with the bar then take a rubber mallet and tap on the bead walking it off the rim. Also if you soap it up good most of the time the tire will pop off without the mallet. Great job and a lot of work that away. Lol

@MainvilleATV

5 жыл бұрын

Thanks for the tips!

How's the 450 handling two people? Is the engine big enough or would it be better to get a 570? Am shopping at the moment... Thanks for your time and as always, fun video!

What a way to do tires!! 😀

Soapy water works perfect!!

Much more fun waiting 15 minutes at a used tire shop .

Great video brother always love to learn something new thank you for sharing

@MainvilleATV

5 жыл бұрын

No problem man, thanks for watching!

From what I have heard it is hard to break the bead on the deep side of the wheel (your first attempt). Looks like you broke the bead after flipping the tire to the shallow side?

do yourself a favor, go to Princess auto an grab 2 of the 16" tire bars, on sale often for $8 ea. night and day difference compared to using the pry bars you used. lube off and on, much less work. dish soap with very little water works best air up without the valve core, more airflow this way will push the beads out easier and faster. if your chuck won't work without the core, either use the tip of a blow gun, or just use the female quick connect on the end of the hose directly on to the stem. once beads seat, screw in the core and pump to 20psi and leave them at 20 for atleast a couple hours before dropping to riding pressure. this stretches the rubber tight onto the rim ensuring a good seat, it also allows the lube to evaporate and dry.

Sometimes a cargo strap tightened around the tire tread circumference so that it compresses the tread and forces the bead outward works, requires a little less air to seat the bead. Loosen the strap as the tire fills.

@MainvilleATV

5 жыл бұрын

I've done that for trailer tires before, forgot about that. Thanks!

I played this game yesterday. I busted one tire off the rim 4 times, trying to get it to stop leaking around the bead. Ended with a trip to carquest for some bead sealer

Get you a old bumper jack to break them down and if you get aluminum rim aluminum side the front side is bigger around than the backside the tire has to come off towards the back of the rim

Soapy water is your friend, I've found in my own trial and error attempts. Makes a world of difference

Alot of satisfaction doing it by hand, it's so worth having it done by some one else with a tire machine tho lol.

@MainvilleATV

5 жыл бұрын

Yeah the going rate here is 10 bucks a tire so it's easy and cheap to have someone else do it really. But we just wanted it give it a whirl ahah. Thanks for watching

@jasonmorehouse3756

5 жыл бұрын

@@MainvilleATV I wish it was 10 bux a tire here in Sudz, remove & reinstall is 15 to 18. and I swear, it takes them almost as long with machines as it takes me to do them manually. I worked in tires for about 10 years, a set of 4 bike tires was a 10-15 min job.

@da1ewok

3 жыл бұрын

Agreed. Did it once on a set of rears, will bring to tire shop going forward haha

When u remove the wheel which way do you loosen the nut? The normal to the left?

@MainvilleATV

2 жыл бұрын

Yes

My tires are 23x10 -12 it's ok to change it to 25 x10-12 because it is hard find the original sizes of my tire

I run over tire edge with my truck tire.

Run in the kitchen, get some dishwashing liquid and butter that sucker up! It'll all slip right off.

5 min in and I’ve seen enough to decide to let the shop do it

I put my "Safety Squints" on when he was removing the bead on the first tire...that pry bar was aimed right at his forearm, if it had slipped YIKES!

@TechMechRandom

4 жыл бұрын

Haha, I totally get what you're saying because I did the same thing.

"Mr. Kyle"

looking at how much trouble it seem to be I think I will keep paying for it lol

Wish I could add a pic get a jack nail a 2 by 4 to a tree put the jack on the tire pressing against the 2by4 and jack lol works every time

@blazersatving2941

5 жыл бұрын

Don't know if ya will understand that lol but I do it with truck and car tires as well as atv

@MainvilleATV

5 жыл бұрын

You can add a pic in our Facebook group! You've peaked my interest.

@bigrod0069

3 жыл бұрын

harbor freight has cheap tire change i bought one, just the bread breaker is worth it. the red one

You can puncture Carlisle tires with finger‼️

Dude I was riding today and my tire flew off!

Lol

Thank God they weren't nice aluminum rims

Hardest way to change a tire I hear ya

Gets easier laying them in the sun.

No thanks. I just paid discount tire 50 bucks to install 3 tires for my 3 wheeler. Take my money!. I will never fight a tire again.

New cars 10’000 dollar atvs and can’t go and pay 50 bucks to get them changed or just buy a 2000 dollar tire changer 🤦‍♂️

Butcher mechanics.

@MainvilleATV

Жыл бұрын

Relax, it's an atv tire and we tried something.