How To Change PSE Fang Compound Crossbow String and Cables (JerryStinger Style)
This is a simple way you can freeze/lock the cams so you can take off the string:) My Walking Dead Props Account!: / twdprops
Жүктеу.....
Пікірлер: 138
@Jerrez6 жыл бұрын
HELLO AGAIN! This is nothing new. I took a look at my old video and told myself i can do better lol. So here i made another video! In this one ill show you how to change the cables too. IN CASE i get copyrighted, im just gonna put my old video back😒✌
@feltronium
Жыл бұрын
Thanks for the video, could you please help me ? I need to put a new string on but the old cable snapped
@beeughhgoodhuman2726
Жыл бұрын
72v 23rd
@TannerVarrasse
8 ай бұрын
@feltronium I'm having the same problem. what dod you end up doing? I think the best solution for me right now is to use paracord to act as the string temporarily. pull the paracord as if it were the bowstring, then insert screwdriver and replace string.
@rickmacgillis84923 жыл бұрын
The way everyone online makes it sound, is that it's very difficult to change a string on a compound crossbow. You just made it look like a cakewalk and made my day. Thank you. :)
@keranzhuo264011 ай бұрын
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. kzread.infoUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
@fish_stick400711 ай бұрын
5 years later and this man’s video is still the best I’ve seen. Every time I would look it up people would just be saving that you need all this fancy equipment and stuff when in reality you just need a screwdriver and a nice pair of balls 👍
@sicric71903 жыл бұрын
So simple ... also pretty smart and easy, we tend to over think things sometimes , myself the worst. Thanks for sharing.
@justinheckman76016 жыл бұрын
The man, the myth, the legend.
@kc22765 жыл бұрын
The music makes me feel like something terrible is about to happen.
@iHustleLXXXI
4 жыл бұрын
K C something terrible will happen when you try and “Jerry rig” am install like this. You’re most likely going to lose a finger it the screw driver loses its traction. How the hell do you expect the cams to be tune correctly by installing the string on the crossbow the way he did? You’re just asking for trouble. If you want to just get a recurve and call it a day. Because I doubt he’s shooting bulleyes after he reinstalled his strings and cables.
@kc2276
4 жыл бұрын
@@iHustleLXXXI I did it and it went smoothly and the bow is still accurate at 40.
@Jerrez
4 жыл бұрын
@@iHustleLXXXI i can see why you would think that but im not a newb, i know how to time my cams heck i lost track to how many bows ive fixed for my people haha And no i dont think its gonna loose traction when theres 155lb holding it in place, only thing that can go wrong is if you didnt place whatever thing all the way into the cam. But still this method isn't for all the crossbows in the world. At the end of the day this is something that WORKS that i shared cause maybe someone can use this trick if they ever have to replace something out in the field. I still use my bow press for everything tho. And my huntings never been better 👌
@jesusrovia77226 жыл бұрын
You sir are really smart. And because of that you will always be the og daryl of KZread. Love the music, im willing to bet you some kid is gonna copy you and steal that song too lol
@jimmykuhn9489
6 жыл бұрын
jesus rovia that is true
@jimmykuhn94896 жыл бұрын
Trust me I'll be liking the next vids
@alaintailfer97885 жыл бұрын
Man , it is so easy , thanks !
@massi7idarifi4284 жыл бұрын
man you are a life saver ,, god bless you
@nonsheep58232 жыл бұрын
Thanks pyjamas and slippers seamed to be the key, im gona buy some and give it ago , thanks dude 😊
@poppa_1986 Жыл бұрын
Thank you!!! My string broke while bow hunting for first time this year and the closest shop said it would take Atleast a week to fix, when I can have my new string here in three, days from order day. so thank you for this video for sure, My bow center point amped 415.
@proles101
Жыл бұрын
Currious if you got it on without a bow press?
@scottb6300
Жыл бұрын
@@proles101 impossible as far as i know.
@David0lyle
10 ай бұрын
Bastard string, 🤷 maybe people don’t know that one? It’s an extra long string that just lets you pull the bow into position, it’s typically used on a simple bow but using this fellows pin method maybe it would work. Maybe I should make a video?
@loneranger53495 ай бұрын
This man is a genius 👏
@nicolassperl3 жыл бұрын
Did you have to adjust the timing of the crossbow afterwords?
@codyryan77904 жыл бұрын
Good shortcut. Used it today
@guitarcohen2224
3 жыл бұрын
Does it still work after u did it?
@t-rocket63813 жыл бұрын
Great video!.... Awesome slippers!
@Jerrez
3 жыл бұрын
Thanks😁
@CartridgeCalls3 жыл бұрын
How do I compress the limbs is the main string is broken?
@reaxsxd53902 жыл бұрын
La cosa que utilizaste para cargarla es para darle como aflojar la cuerda?
@user-jd7jw4zv4r5 ай бұрын
Excellent job 👏 👍 👌
@cheachyang35024 жыл бұрын
Hi boss can tell me how heavy the cam ?? Plssss thks
@wrecks1984 Жыл бұрын
I dont know about blocking just one cam at a time. Seems like a lot of tension for one cam and limb. Maybe block both cams?
@nashviper4586 Жыл бұрын
Hey, I don’t know if you are still replying to comments or not but does this method work on a carbon express piledriver 390 and if so will this screwdriver method damage the limbs at all?
@joelalvarezcaballero61352 жыл бұрын
Excelente el vídeo de cambio de cuerda de la ballesta 👍
@MikeC-my4lf5 жыл бұрын
What music is that
@BudgetGamingPcTests3 жыл бұрын
THANK YOU!
@Shithead633 жыл бұрын
Awesome, thanks. 👍
@spencerburrows3525 Жыл бұрын
Can you do this on a Barnett Predator & Barnett Ghost 420??
@theredqueen22832 жыл бұрын
28 days later theme song! In a heartbeat
@renerivera59822 жыл бұрын
How do you replace string if string is broken?
@Freddyy556 Жыл бұрын
Omg Thanks man 💪
@bowdiersackett64332 жыл бұрын
What if string is broken that you are replacing..so no string on bow to start with to pull back is there a trick for that or going to need a press
@TannerVarrasse
8 ай бұрын
tie paracord where the string would normally go to act as a temporary string just to get it to where you can get a screwdriver wedged in the cam
@Clos-yk7hgАй бұрын
How do I do it if I don’t have a string on there to begin with ?
@macsorfi58153 жыл бұрын
Easy way... thanks
@chandlerchildress9866 жыл бұрын
Ur awesome Jerry
@Jerrez
6 жыл бұрын
Chandler Childress ur awesome for supporting my channel man!
@kevindufour27579 ай бұрын
Did you back the screws out before this?
@LTCORBIN226 жыл бұрын
Awesome bud!! I don’t have the balls to do this to my fang!!😂😂😂
@Jerrez
6 жыл бұрын
LT.PRODUCTIONS dont worry it took me almost a year to try! Atleast now YOU know it works haha i had to try it for the first time ever lol
@LTCORBIN22
6 жыл бұрын
JerryStinger's StuffandThangs I appreciate the video if I ever want to do it..
@tomtolentino75753 жыл бұрын
Brilliant 👍NO BOW PRESS REQUIRED 👍
@mikelsantacruz44602 ай бұрын
Donde comprar cuerda de disparo 34 o 35 pulgadas para la archery 405 dagger
@samdoe75644 жыл бұрын
Hey Bro! This is quite awesome!! Would this also works on my Hori-Zone Kornet MX 405? I see the cams of your PSE are similar to my Hori-Zone cams. I'm a bit worried about doing this with a 200 pounds crossbow, but maybe you could tell me more. Do you think I could broke my limbs or cams by trying this? Thank you! You're the best! Thanks a lot for your videos! Greetings from Austria ✌️
@samdoe7564
4 жыл бұрын
Here's a link to the Hori-Zone crossbow www.crossbowadventure.at/armbrust/armbrust-hori-zone/hori-zone-kornet-mx-405/
@Jerrez
4 жыл бұрын
Yes all these crossbows have the same top bow design. But since your bow is 400lb id recommend loosen the top bolts a few times to make it a bit weaker then do it. You dont want to put to much pressure on the limbs
@samdoe7564
4 жыл бұрын
JerryStinger's StuffandThangs Thank you so much!
@shoot4tq625
9 ай бұрын
You are the man I brought my thing 352 my local shop and they said they do not work on PSE gave me some BS excuse about not being in their insurance they just don't sell that company and I don't think they want to work on their products everywhere's I look said I need to get a bow press and all this BS when I have 100 screwdrivers laying around going to try it today thank you so much
@adamcrane56995 жыл бұрын
thank you
@chandlerchildress9866 жыл бұрын
I am a very big fan and love Daryl Dixon
@nosoyono10814 жыл бұрын
Do you have a video on how to un cock the fang crossbow??
@Jerrez
4 жыл бұрын
Hmm i never actually tried it surprisingly. good idea. Im gonna see if its possible soon, if i dont upload a video about it its probably because i couldn't do it lol
@adamcrane56995 жыл бұрын
your the fuckin man you just saved my day
@Alex-oy3fs5 жыл бұрын
Where can i find the cable and the string
@nosoyono1081
4 жыл бұрын
Alex 1172 most bow shops can make you one
@willhood15525 жыл бұрын
Where did you get the replacement string from?
@Jerrez
5 жыл бұрын
Will Hood i didnt get one. I took it off and put it back on...😂🤣🤣
@royrogers3624
5 жыл бұрын
You can find them online ive found a few for a old ass Barnet crossbow of my grandfathers
@roccomanucci
2 жыл бұрын
Oh boy........we got a real winner here folks 🤦♂️😂😂😂
@basskicker74882 жыл бұрын
I need help. I have a sniper 370 center point and I can't take the third one on the middle I manage all but one
@Jerrez
2 жыл бұрын
U gotta have something in the cams on BOTH sides of the limbs, maybe 2 screwdrivers, if you just have 1 one cable will still have tension
@Jerrez
2 жыл бұрын
Or you can just switch sides of the screwdriver to the other cam like in the video
@x-prime85895 жыл бұрын
Didn't you bend your cams with this method?
@desertrainfrog1691
5 жыл бұрын
I wish he'd answer this
@Jerrez
5 жыл бұрын
I didn't bend them.... there as good as when I got them
@sonnymichael3 жыл бұрын
What if my string snapped and there is no string on the bow?
@12clockhitter82
2 жыл бұрын
Same thing just happened to me now 😭I tried use a used arrow on it 😂snapped on me straight away
@sonnymichael
2 жыл бұрын
@@12clockhitter82 I suggest just taking it into a archery bow store or Bass pro, something like that and having them repair it since we're not in the apocalypse just yet. 😅👍
@12clockhitter82
2 жыл бұрын
@@sonnymichael 😂😂your right I don’t want to mess around with it
@sonnymichael
2 жыл бұрын
@@12clockhitter82 the only way that I know how to restring a crossbow is with ratchet straps. But I have never done that myself only seen a video of it. That's why I'm probably switching back to a recurve crossbow.
@janesmith5665
Жыл бұрын
@@sonnymichael Recurve all the way. Easy string change and have plenty of spares. A broken string can be replaced by simply stringing some cordage on the crossbow to pull the limbs up before adding a new string.
@eldiegodelayer1566 жыл бұрын
Por cierto me gustó tu video
@Jerrez
6 жыл бұрын
Gracias!!🖒🖒
@eldiegodelayer156
6 жыл бұрын
JerryStinger's StuffandThangs gracias a ti:v
@mattiasgarpdal18252 жыл бұрын
Hey I just bought my first crossbow and the string jumped off after my friend hit the back of a chair when he shot.. 1 shot was all I got after about crossbows for 35 years... and now I don't know what I'm doing and there's nobody to ask since I'm in Norway where they hate crossbows. Could you help a very depressed Scandinavian? It's a bear Intense regards mattias
@Jerrez
2 жыл бұрын
Is it the same model as this? They're all different and some stuff wont work with others
@jimmykuhn94896 жыл бұрын
Honestly I don't know why this channel hasn't hi 1million subs already
@Jerrez
6 жыл бұрын
Koby James Thanks man that means a lot! lol
@jimmykuhn9489
6 жыл бұрын
I'm really glad to see a big Daryl fan most people are going for Carl now that he's dead
@jimmykuhn9489
6 жыл бұрын
And thanks for the awesome videos keep it up bro!!??😎
@HolySword31217 күн бұрын
269/1000 实时翻译 划译 你好,我曾经Hello, I once asked Barnett's official staff, and they said that the crossbow needs to adjust the wheel synchronization, but I don't know how to do it. Can you give me a lesson? There is no tutorial related to this issue on the website. If possible, thank you very much
@B7mechanics4 жыл бұрын
Can this work with center point sniper elite 370 185 draw weight 370 FPS is this sage to do?
@MR2FAST4U.3 жыл бұрын
hey i got one question can you make the string by yourself ?
@amirrezasadeghi6334 Жыл бұрын
Also teach Crassbow shooting
@jakewells40982 жыл бұрын
But my string is broken and my cables are not so I can’t do that
@Jerrez
2 жыл бұрын
Your supposed to replace them whenever the servings wear not until it snaps
@danw81533 жыл бұрын
What if your string is already broken
@riffhurricane
3 жыл бұрын
A late answer but I'm thinking about this question myself atm. I think I'd buy or make a string a few inches longer than the one I need so it'll go over the limbs easier then from that point on as per this video. Same principle as the stringing aids for recurve xbows.
@doomracing55275 жыл бұрын
Not picking as im only 1.5 week into crossbowes, but it seems your string is very loose when ready to be cocked. I can't even barely get it off the string stops.
@Jerrez
5 жыл бұрын
Doom Racing i might've loosed the limbs a bit to demonstrate easier for the video i dont remember, either way i cock this thing by hand all the time, your crossbow may be a bit more powerful, mines 155lb
@rmacgregor58234 ай бұрын
But how do I do it when my string snapped off?.so. Can't cock it to begin with
@Jerrez
4 ай бұрын
I mean, your not supposed to use the crossbow until the string snaps, you supposed to replace the string once the serving gets damaged.
@Jerrez
4 ай бұрын
Im not sure what crossbow you have, everyone is trying this method with different crossbows which is dangerous. This tutorial was specifically for the fang. With the fang you can also loosen the 2 top bolts of the limbs just enough to also replace the strings and cables that way
@edwinespinoza5106 Жыл бұрын
Es un buen consejo
@MrJoshap3 жыл бұрын
Does anyone know if this process works for a ek blade?
@nonsheep5823
2 жыл бұрын
Just done it on my ek hex 400 used 2 electrical screwdrivers so it didn't mark anything
@TannerVarrasse
8 ай бұрын
@@nonsheep5823hey just asking for a follow up on the cross ow you did this to? I'm new to crossbows and have heard that doing this can mess the timing up and whatnot? which I don't even know what that means lol. but could you elaborate for me?
@nonsheep5823
8 ай бұрын
@@TannerVarrasse don't do it it damaged my cambs, I take it to a guy now he charges me £30 well worth the money bow press is only way
@TannerVarrasse
8 ай бұрын
@@nonsheep5823 aww damg that really disappoints me because I just got my bow and I'm so eager to shoot it I've only shot it a few times before my dumbahh either didn't seat the bolt all the way or when I put the nock in the bolt I didn't put it in the correct way. so lesson learned either way. if you couldn't already tell I've never owned a crossbow before so
@nonsheep5823
8 ай бұрын
@@TannerVarrasse same thing happed to my adder , bolt blew out the magazine loader , single recurve crossbows are best in a way bastard to cock but cheap and easy to maintain
@houtje243 жыл бұрын
Replacing the bowstring works on a Mankung Kraken, but I think replacing the cableset won't work because you have to pull the cableloop through the riser.
@kaiecarrington9822
2 жыл бұрын
Just bought a Kraken, how you finding it?
@nosoyono10814 жыл бұрын
My fang string is a lot tighter than that
@IIFaDedII4 жыл бұрын
Always service your crossbow before zombie apocalypse!
@eldiegodelayer1566 жыл бұрын
Y tu que haces para que quede así de sensible
@Jerrez
6 жыл бұрын
el maloso boby :v pronto voy hacer un video de como hacer la ballesta menos poderosa🖒
@lgg23043 жыл бұрын
I wont even take my slippers off! Damn! Lol
@grayisdabest3 жыл бұрын
Music from 28 days later.
@Jerrez
3 жыл бұрын
No way really?
@grayisdabest
3 жыл бұрын
@@Jerrez yeah ! ,not the intro music but the music playing whilst you are stringing up ,p.s thanks for the vid i didnt have a clue how to do it.
@b1n4 жыл бұрын
If that cam would break for any reason, say good bye to your fingers..
@Jerrez
4 жыл бұрын
If the cam breaks your crossbow is cheap af and theres already 160lb of pressure on that cam anyway with that string squeezing it. if your scared dont try it simple
@user-hv4dm8gr8t2 ай бұрын
North slide track😢
@mariocovacich83935 жыл бұрын
try doing it when your shooting string is already broken....different story then
@Jerrez
5 жыл бұрын
Never said it worked that way...
@Jerrez
5 жыл бұрын
And on this model crossbow you can still change it even if the string is broken.... just loosen the limbs i have a video on it already
@alexandergarcia17134 жыл бұрын
So many questions like wats this fella wearing n why is he using the song from 28 days later for such an unsuspensful crossbow tutorial? But still like his process 👌
@Jerrez
4 жыл бұрын
🙄
@rogerwilson4076
4 жыл бұрын
You call removing a string off of a 160lb crossbow that can explode any second unsuspenseful?
@guitarcohen2224
3 жыл бұрын
@@rogerwilson4076 lmao
@Jerrez4 жыл бұрын
This is getting annoying with all the 28 days later comments. I didnt even know that was from a movie i just found it and used it. But everyones still getting butthurt for me using it for some reason. God damn
Пікірлер: 138
HELLO AGAIN! This is nothing new. I took a look at my old video and told myself i can do better lol. So here i made another video! In this one ill show you how to change the cables too. IN CASE i get copyrighted, im just gonna put my old video back😒✌
@feltronium
Жыл бұрын
Thanks for the video, could you please help me ? I need to put a new string on but the old cable snapped
@beeughhgoodhuman2726
Жыл бұрын
72v 23rd
@TannerVarrasse
8 ай бұрын
@feltronium I'm having the same problem. what dod you end up doing? I think the best solution for me right now is to use paracord to act as the string temporarily. pull the paracord as if it were the bowstring, then insert screwdriver and replace string.
The way everyone online makes it sound, is that it's very difficult to change a string on a compound crossbow. You just made it look like a cakewalk and made my day. Thank you. :)
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. kzread.infoUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
5 years later and this man’s video is still the best I’ve seen. Every time I would look it up people would just be saving that you need all this fancy equipment and stuff when in reality you just need a screwdriver and a nice pair of balls 👍
So simple ... also pretty smart and easy, we tend to over think things sometimes , myself the worst. Thanks for sharing.
The man, the myth, the legend.
The music makes me feel like something terrible is about to happen.
@iHustleLXXXI
4 жыл бұрын
K C something terrible will happen when you try and “Jerry rig” am install like this. You’re most likely going to lose a finger it the screw driver loses its traction. How the hell do you expect the cams to be tune correctly by installing the string on the crossbow the way he did? You’re just asking for trouble. If you want to just get a recurve and call it a day. Because I doubt he’s shooting bulleyes after he reinstalled his strings and cables.
@kc2276
4 жыл бұрын
@@iHustleLXXXI I did it and it went smoothly and the bow is still accurate at 40.
@Jerrez
4 жыл бұрын
@@iHustleLXXXI i can see why you would think that but im not a newb, i know how to time my cams heck i lost track to how many bows ive fixed for my people haha And no i dont think its gonna loose traction when theres 155lb holding it in place, only thing that can go wrong is if you didnt place whatever thing all the way into the cam. But still this method isn't for all the crossbows in the world. At the end of the day this is something that WORKS that i shared cause maybe someone can use this trick if they ever have to replace something out in the field. I still use my bow press for everything tho. And my huntings never been better 👌
You sir are really smart. And because of that you will always be the og daryl of KZread. Love the music, im willing to bet you some kid is gonna copy you and steal that song too lol
@jimmykuhn9489
6 жыл бұрын
jesus rovia that is true
Trust me I'll be liking the next vids
Man , it is so easy , thanks !
man you are a life saver ,, god bless you
Thanks pyjamas and slippers seamed to be the key, im gona buy some and give it ago , thanks dude 😊
Thank you!!! My string broke while bow hunting for first time this year and the closest shop said it would take Atleast a week to fix, when I can have my new string here in three, days from order day. so thank you for this video for sure, My bow center point amped 415.
@proles101
Жыл бұрын
Currious if you got it on without a bow press?
@scottb6300
Жыл бұрын
@@proles101 impossible as far as i know.
@David0lyle
10 ай бұрын
Bastard string, 🤷 maybe people don’t know that one? It’s an extra long string that just lets you pull the bow into position, it’s typically used on a simple bow but using this fellows pin method maybe it would work. Maybe I should make a video?
This man is a genius 👏
Did you have to adjust the timing of the crossbow afterwords?
Good shortcut. Used it today
@guitarcohen2224
3 жыл бұрын
Does it still work after u did it?
Great video!.... Awesome slippers!
@Jerrez
3 жыл бұрын
Thanks😁
How do I compress the limbs is the main string is broken?
La cosa que utilizaste para cargarla es para darle como aflojar la cuerda?
Excellent job 👏 👍 👌
Hi boss can tell me how heavy the cam ?? Plssss thks
I dont know about blocking just one cam at a time. Seems like a lot of tension for one cam and limb. Maybe block both cams?
Hey, I don’t know if you are still replying to comments or not but does this method work on a carbon express piledriver 390 and if so will this screwdriver method damage the limbs at all?
Excelente el vídeo de cambio de cuerda de la ballesta 👍
What music is that
THANK YOU!
Awesome, thanks. 👍
Can you do this on a Barnett Predator & Barnett Ghost 420??
28 days later theme song! In a heartbeat
How do you replace string if string is broken?
Omg Thanks man 💪
What if string is broken that you are replacing..so no string on bow to start with to pull back is there a trick for that or going to need a press
@TannerVarrasse
8 ай бұрын
tie paracord where the string would normally go to act as a temporary string just to get it to where you can get a screwdriver wedged in the cam
How do I do it if I don’t have a string on there to begin with ?
Easy way... thanks
Ur awesome Jerry
@Jerrez
6 жыл бұрын
Chandler Childress ur awesome for supporting my channel man!
Did you back the screws out before this?
Awesome bud!! I don’t have the balls to do this to my fang!!😂😂😂
@Jerrez
6 жыл бұрын
LT.PRODUCTIONS dont worry it took me almost a year to try! Atleast now YOU know it works haha i had to try it for the first time ever lol
@LTCORBIN22
6 жыл бұрын
JerryStinger's StuffandThangs I appreciate the video if I ever want to do it..
Brilliant 👍NO BOW PRESS REQUIRED 👍
Donde comprar cuerda de disparo 34 o 35 pulgadas para la archery 405 dagger
Hey Bro! This is quite awesome!! Would this also works on my Hori-Zone Kornet MX 405? I see the cams of your PSE are similar to my Hori-Zone cams. I'm a bit worried about doing this with a 200 pounds crossbow, but maybe you could tell me more. Do you think I could broke my limbs or cams by trying this? Thank you! You're the best! Thanks a lot for your videos! Greetings from Austria ✌️
@samdoe7564
4 жыл бұрын
Here's a link to the Hori-Zone crossbow www.crossbowadventure.at/armbrust/armbrust-hori-zone/hori-zone-kornet-mx-405/
@Jerrez
4 жыл бұрын
Yes all these crossbows have the same top bow design. But since your bow is 400lb id recommend loosen the top bolts a few times to make it a bit weaker then do it. You dont want to put to much pressure on the limbs
@samdoe7564
4 жыл бұрын
JerryStinger's StuffandThangs Thank you so much!
@shoot4tq625
9 ай бұрын
You are the man I brought my thing 352 my local shop and they said they do not work on PSE gave me some BS excuse about not being in their insurance they just don't sell that company and I don't think they want to work on their products everywhere's I look said I need to get a bow press and all this BS when I have 100 screwdrivers laying around going to try it today thank you so much
thank you
I am a very big fan and love Daryl Dixon
Do you have a video on how to un cock the fang crossbow??
@Jerrez
4 жыл бұрын
Hmm i never actually tried it surprisingly. good idea. Im gonna see if its possible soon, if i dont upload a video about it its probably because i couldn't do it lol
your the fuckin man you just saved my day
Where can i find the cable and the string
@nosoyono1081
4 жыл бұрын
Alex 1172 most bow shops can make you one
Where did you get the replacement string from?
@Jerrez
5 жыл бұрын
Will Hood i didnt get one. I took it off and put it back on...😂🤣🤣
@royrogers3624
5 жыл бұрын
You can find them online ive found a few for a old ass Barnet crossbow of my grandfathers
@roccomanucci
2 жыл бұрын
Oh boy........we got a real winner here folks 🤦♂️😂😂😂
I need help. I have a sniper 370 center point and I can't take the third one on the middle I manage all but one
@Jerrez
2 жыл бұрын
U gotta have something in the cams on BOTH sides of the limbs, maybe 2 screwdrivers, if you just have 1 one cable will still have tension
@Jerrez
2 жыл бұрын
Or you can just switch sides of the screwdriver to the other cam like in the video
Didn't you bend your cams with this method?
@desertrainfrog1691
5 жыл бұрын
I wish he'd answer this
@Jerrez
5 жыл бұрын
I didn't bend them.... there as good as when I got them
What if my string snapped and there is no string on the bow?
@12clockhitter82
2 жыл бұрын
Same thing just happened to me now 😭I tried use a used arrow on it 😂snapped on me straight away
@sonnymichael
2 жыл бұрын
@@12clockhitter82 I suggest just taking it into a archery bow store or Bass pro, something like that and having them repair it since we're not in the apocalypse just yet. 😅👍
@12clockhitter82
2 жыл бұрын
@@sonnymichael 😂😂your right I don’t want to mess around with it
@sonnymichael
2 жыл бұрын
@@12clockhitter82 the only way that I know how to restring a crossbow is with ratchet straps. But I have never done that myself only seen a video of it. That's why I'm probably switching back to a recurve crossbow.
@janesmith5665
Жыл бұрын
@@sonnymichael Recurve all the way. Easy string change and have plenty of spares. A broken string can be replaced by simply stringing some cordage on the crossbow to pull the limbs up before adding a new string.
Por cierto me gustó tu video
@Jerrez
6 жыл бұрын
Gracias!!🖒🖒
@eldiegodelayer156
6 жыл бұрын
JerryStinger's StuffandThangs gracias a ti:v
Hey I just bought my first crossbow and the string jumped off after my friend hit the back of a chair when he shot.. 1 shot was all I got after about crossbows for 35 years... and now I don't know what I'm doing and there's nobody to ask since I'm in Norway where they hate crossbows. Could you help a very depressed Scandinavian? It's a bear Intense regards mattias
@Jerrez
2 жыл бұрын
Is it the same model as this? They're all different and some stuff wont work with others
Honestly I don't know why this channel hasn't hi 1million subs already
@Jerrez
6 жыл бұрын
Koby James Thanks man that means a lot! lol
@jimmykuhn9489
6 жыл бұрын
I'm really glad to see a big Daryl fan most people are going for Carl now that he's dead
@jimmykuhn9489
6 жыл бұрын
And thanks for the awesome videos keep it up bro!!??😎
269/1000 实时翻译 划译 你好,我曾经Hello, I once asked Barnett's official staff, and they said that the crossbow needs to adjust the wheel synchronization, but I don't know how to do it. Can you give me a lesson? There is no tutorial related to this issue on the website. If possible, thank you very much
Can this work with center point sniper elite 370 185 draw weight 370 FPS is this sage to do?
hey i got one question can you make the string by yourself ?
Also teach Crassbow shooting
But my string is broken and my cables are not so I can’t do that
@Jerrez
2 жыл бұрын
Your supposed to replace them whenever the servings wear not until it snaps
What if your string is already broken
@riffhurricane
3 жыл бұрын
A late answer but I'm thinking about this question myself atm. I think I'd buy or make a string a few inches longer than the one I need so it'll go over the limbs easier then from that point on as per this video. Same principle as the stringing aids for recurve xbows.
Not picking as im only 1.5 week into crossbowes, but it seems your string is very loose when ready to be cocked. I can't even barely get it off the string stops.
@Jerrez
5 жыл бұрын
Doom Racing i might've loosed the limbs a bit to demonstrate easier for the video i dont remember, either way i cock this thing by hand all the time, your crossbow may be a bit more powerful, mines 155lb
But how do I do it when my string snapped off?.so. Can't cock it to begin with
@Jerrez
4 ай бұрын
I mean, your not supposed to use the crossbow until the string snaps, you supposed to replace the string once the serving gets damaged.
@Jerrez
4 ай бұрын
Im not sure what crossbow you have, everyone is trying this method with different crossbows which is dangerous. This tutorial was specifically for the fang. With the fang you can also loosen the 2 top bolts of the limbs just enough to also replace the strings and cables that way
Es un buen consejo
Does anyone know if this process works for a ek blade?
@nonsheep5823
2 жыл бұрын
Just done it on my ek hex 400 used 2 electrical screwdrivers so it didn't mark anything
@TannerVarrasse
8 ай бұрын
@@nonsheep5823hey just asking for a follow up on the cross ow you did this to? I'm new to crossbows and have heard that doing this can mess the timing up and whatnot? which I don't even know what that means lol. but could you elaborate for me?
@nonsheep5823
8 ай бұрын
@@TannerVarrasse don't do it it damaged my cambs, I take it to a guy now he charges me £30 well worth the money bow press is only way
@TannerVarrasse
8 ай бұрын
@@nonsheep5823 aww damg that really disappoints me because I just got my bow and I'm so eager to shoot it I've only shot it a few times before my dumbahh either didn't seat the bolt all the way or when I put the nock in the bolt I didn't put it in the correct way. so lesson learned either way. if you couldn't already tell I've never owned a crossbow before so
@nonsheep5823
8 ай бұрын
@@TannerVarrasse same thing happed to my adder , bolt blew out the magazine loader , single recurve crossbows are best in a way bastard to cock but cheap and easy to maintain
Replacing the bowstring works on a Mankung Kraken, but I think replacing the cableset won't work because you have to pull the cableloop through the riser.
@kaiecarrington9822
2 жыл бұрын
Just bought a Kraken, how you finding it?
My fang string is a lot tighter than that
Always service your crossbow before zombie apocalypse!
Y tu que haces para que quede así de sensible
@Jerrez
6 жыл бұрын
el maloso boby :v pronto voy hacer un video de como hacer la ballesta menos poderosa🖒
I wont even take my slippers off! Damn! Lol
Music from 28 days later.
@Jerrez
3 жыл бұрын
No way really?
@grayisdabest
3 жыл бұрын
@@Jerrez yeah ! ,not the intro music but the music playing whilst you are stringing up ,p.s thanks for the vid i didnt have a clue how to do it.
If that cam would break for any reason, say good bye to your fingers..
@Jerrez
4 жыл бұрын
If the cam breaks your crossbow is cheap af and theres already 160lb of pressure on that cam anyway with that string squeezing it. if your scared dont try it simple
North slide track😢
try doing it when your shooting string is already broken....different story then
@Jerrez
5 жыл бұрын
Never said it worked that way...
@Jerrez
5 жыл бұрын
And on this model crossbow you can still change it even if the string is broken.... just loosen the limbs i have a video on it already
So many questions like wats this fella wearing n why is he using the song from 28 days later for such an unsuspensful crossbow tutorial? But still like his process 👌
@Jerrez
4 жыл бұрын
🙄
@rogerwilson4076
4 жыл бұрын
You call removing a string off of a 160lb crossbow that can explode any second unsuspenseful?
@guitarcohen2224
3 жыл бұрын
@@rogerwilson4076 lmao
This is getting annoying with all the 28 days later comments. I didnt even know that was from a movie i just found it and used it. But everyones still getting butthurt for me using it for some reason. God damn
Dawn of the dead music
@EroticOnion23
4 жыл бұрын
28 Days Later...
That can't be good for the limbs
@Jerrez
3 жыл бұрын
Yeah i thought that too.