√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

Thank you man. At 38 i learned to change my own oil, God bless. Excellent video

Right to the point! No excess blather!

The factory approved procedure is to loosen the filter first so oil drains out of it. I use a 15/16 wrench/socket for the filter 'bolt'.

@1AAuto

3 жыл бұрын

+Tom Cordes Thanks for the tip!

@paulsworld2287

2 жыл бұрын

I cant find something to get the "bolt" loose

I like that top-mount oil filter. Didn't realize it was becoming prevalent. Kind of wish more cars did it that way. Struggling with an oil filter that's mounted the usual open-end-up way is the worst part of oil changes imo.

@Sw1ssJay

2 жыл бұрын

Agree 100%

I found just taking the air filter hose off worked. Never touched the plastic cover. 15/16 socket fit absolutely perfect for the oil filter cover. I did open the oil filter housing while draining the oil. This was my 1st oil change with this van (just bought it). Was very easy and very lil mess with the oil filter on top.

Thanks so much very good video,look very easy.

Very good thank you for your video

Thanks great video now i can do oil chang thanks.

Thanks for jelping me find the elusive oil filter

The oil filter on a 3.3 liter is underneath in front of oil pan very easy to access

Thanks 😊

thank you very useful

@1AAuto

2 жыл бұрын

+Miki Kovac Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

This procedure is little bit scary. Aren't you supposed to loosen that oil filter before you drain? Because once you loosen the filter some oil is gonna drain down to sump due to some vaccum release..Or Am I wrong?

Saludos desde la Cd de México ¿ lleva el mismo aceite aunque tenga 190000 kms? Saludos y gracias.

Here is how to change oil in all cars, start car and warm up engine then put pan under oil pan drain plug remove plug and drain then remove oil filter then replace oil filter with some lube on the rubber seal and tighten as best you can hand tite then put drain plug back on oil pan and fill back up with the best oil you can get. And your all done.

@1AAuto

3 жыл бұрын

+aux1z11 Thanks for the feedback!

Thanks..

@1AAuto

3 жыл бұрын

+Mahmoud Al Shawi Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Wat size wrench do I use for both filter and oil plug?

It's always a good practice to put on a new washer on the drain plug for every oil change.

@zeez9053

3 жыл бұрын

Not really it’s good practice to access the condition of the crush washer for damage which they usually aren’t.and turning it over to lightly tighten back up.Then check for leaks and determine if your good to go !

I need someone to tell me how to in my driver's window (manual) I can only get 1 roller on please help thanks Mel

So I need a 13 mm and 24 mm ?

Got a video on dipstick tube change?

@1AAuto

2 жыл бұрын

+TRèY FLiPPs We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

never go overpay for your own oilchange or car work if you can do it yourself.

I just happen to have a car lift at home ..

@KeithConley

2 жыл бұрын

Do like 99% of everyone and use a jack and jack stands. If your vehicle is tall enough, sometimes lifting it isn't even needed. A lift would be nice, but unnecessary for an oil change.

Who tf uses N-M😂

Save money by doing it yourself.