@15:50 to watch HOW TO SET UP WATCH (time, date etc) - @17:20 how to fix MISALIGNED ANALOG HANDS. Anyone have misaligned analog hands? Did the video help?

@theludixblaster

5 жыл бұрын

thanks for video very helpfull ;)

@IronCobra4

5 жыл бұрын

Yes, I did and your video helped greatly Thank you 🙏🏻 very much

@visioncom

5 жыл бұрын

Thanks, the manual is not clear on how to align the misaligned analog hands. Your video helped a lot.

@ironmanIronman-jg6yc

4 жыл бұрын

i changed my batteries so the hands where out of sync with the digital time so yes sir thank you so helpfull

@justincarloflorida8636

4 жыл бұрын

Thank you! very helpful and very detail!

your’e changing batteries, there’s no need to lift those tabs up. like you said those hold the module in place. just pry the batteries and change it.

@jedsim875

3 ай бұрын

U didn't listen to what he said mate . Watch again to understand

Thank you for the video. I've recently bought one of these watches and it's good to know how to change the batteries when the time comes.

I love the dust particles under the glass. They really add to the view :)

Very nice video, well thought out, nicely filmed and narrated. My battery change went well, but during disassembly one of my Phillips screws started to strip. I switched from the P0 to a P00 driver and the smaller Phillips easily grabbed the screw that started to strip. I finished assembly with the P00 and the screws fit really well. Thank you for a great video.

Best video I’ve found! Shows all the problem points and how to fix them.

Just going to take mine in, but thanks to you and your video, I'm going to tackle this myself. Thank you. Well done.

So easy, done step by step, awesome man. Done mine today

Hey man, it's the second time I have to replace my watch battery and came back to your video, just wanted to say thank you once again! It only cost me $3.99 to buy the batteries, you have saved me a good amount of money. Thanks!!!

This video was very helpful! The hand adjustments had me thinking I broke the watch before finishing watching it to see how to adjust. Thanks man!

Great tutorial! Not preamble, no bullshit, straight to the point. Thanks!

best how to video on this watch i have ever seen!!! thank you

I was frustrated for a while changing my battery in my gg1000 mudmaster and set up but after I watched your video for a little while for setting it got to me and that your video help me 100% thank you very much it's her I appreciate it

@GiShockGo

4 жыл бұрын

Rick Rodriguez my pleasure thanks for watching

Thanks for this video my friend! Just changed my batteries on my GG-100TLC and couldn’t get the watch back on time correctly with everything lining up until I found this GREAT vid showing me step by step how to reset everything back to normal. Thanks once again!! 👏👏💯☝️

I just got this watch yesterday, great video, thanks.

Thank you so much for this video I just changed my batteries on my GG1000 💯 and I’m back up and running

As a former jeweler, that was a huge 'party foul' setting the dial and hands on a cloth and sliding it (cringe)! Why did you skip the Step shown on the STICKER? It tells you on the sticker what to do. Stick one end of the tweezers in the hole contact (+), the other on the back where it says: (-).

@trytowachmystuff1047

5 жыл бұрын

Hi has no idea what is he doing there. Lmao poor watch :( . He is so uncareful with it :(

@dude28405

5 жыл бұрын

Made me afraid very afraid

@CallFor911

5 жыл бұрын

Searching for a quality video where they show the reset after battery change. So far not one did it. This videos should be banned. My heart stopped for a while after he dropped the inside...

@dexternuqui753

5 жыл бұрын

Ditto... facing the exposed watch face on a piece of microfiber cloth... you could have accidentally removed the hands.... ahhhhhhhh.... and total disregard of the instructions on the sticker

@przebywesawaborkowski2047

4 жыл бұрын

Hi. In the hole on the left of AC lettering? And second one on the back, where is - ? Could I use small cable instead of tweezers? How long have they to be connected. Thank you for your time.

Thanks a lot for the video, and taking the time, I just had my batteries replaced and couldn’t figure out why the little arrow wasn’t pointing to the right spot. Good help explaining how to fix.- Now for those who just have something bad to say about the video, how about instead of wasting time on negative crap, why don’t you go ahead and make a video on your own to show us your savviness.

@GiShockGo

5 жыл бұрын

Rony Rosales thanks much! I don't mind the negative comments. I won't be able to please every viewer but it motivates me to improve the videos. Thanks again glad the video helped. Cheers

Thanks my Friends ...helps a Lot...good video..greetings from Perú...specially fix misaligned analog hands

Brilliant many thanks, wrong hand time has been doing my head in since battery change

My local jeweler messed this up and had me without my favorite timepiece for 3 weeks, I can batteries ordered online in 3 days.... Great help, thank you!

Superb, just changed my shock’s battery watching this video. Thank you so much.

I just bought the G Shock Mudmaster yesterday and I am seriously well impressed with the functionings the watch provides as well as I see it as well made and a robust watch and great to look at I would definitely recommend the Mudmaster to everyone whom is going to purchase a new watch 😁

I can’t watch you butcher that g shock any more..

@GiShockGo

4 жыл бұрын

Dan Young lol

@maxmixer

3 жыл бұрын

Guys a nightmare lol

@Denkic100

3 жыл бұрын

@@GiShockGo you probably damaged the pointers when you took the module out, and the module fell back

@Denkic100

3 жыл бұрын

@@GiShockGo the towel trick, is just as stupid. For anyone changing the battery, do not take the module out unless necessary

Thank you very much for the tutorial!! You've saved my $45. Thank you thank you.

@GiShockGo

5 жыл бұрын

Mr66Yellow music to my ears!!! Glad it helped

Thanks man! Excellent tutorial, very precise. Great job!

Hey man, thank you. Here where I live I don't trust the watchmakers to properly put the gasket. I was able to replace the batteries by myself, at least if something catastrophic happens it was my fault. Thanks!

@GiShockGo

5 жыл бұрын

Elias De la Torre awesome! Glad to hear

Your a life saver man thanks for the tutorial

Thanks dude for the help.. Got my mode hand fixed

This video was incredibly helpful. Thank you!

That was perfect!! Thank You!!

I love this watch.Built like a tank.I use mine diving and spearfishing and it never leaked.

Thanks for this video, wouldn’t of been able to do it without it :)

Muchas gracias por el vídeo. Muy bien explicado, pude configurar el reloj gracias al tutorial.

Thank you for the detailed and clear walk through. Just fixed mine!

Great job here of showing how to do this. Thanks!

@GiShockGo

5 жыл бұрын

Jim Busch thanks!

You are my saviour.. Thanks a lot, Bro..

Thank you great explanation and was really helpful I did mine thanks to you

Hi. There is info on sticker: After battery replacement contact AC with (-) using tweezers. Is it necessary? You didn't do that. Could I use small electric cable instead of tweezers? Where is AC and where is (-). Thank you for your time.

thank you so much .big help for me

Hey man, It's me again. Just wanted to jump back to THANK YOU again: After replacing the batteries the hands were all messed up, even the mode indicator. I thought my watch was gone for good and then came back to your video to follow the hands alignment procedure and now everything is back to normal. Thank you very, very much. Honestly, I was really scared since not only the hands but that mode indicator too was messed, but now everything it's back to normal. I don't know why people put dislike on the video since it's really complete and thorough, probably because the thing with the microfiber, but, bleh, your video is amazing. So, anyway, thank you for your amazing tutorial, cheers from Mexico!

@GiShockGo

5 жыл бұрын

Elias De la Torre thanks for taking the time to comment.... Glad the video helped and you were able to fix the hands. Gracias hasta México!

Glad I found this vid!!! Thank you

Excelente vídeo, un tutorial magnífico, me sirvió totalmente, gracias.

Very, very nice Video! Thank you so much!

Very easy to do with your instruction thanks

Awesome thank you so much this video addressed every issue I had!

Thank bro couldn't figure it out this video help me 👍👍👌

Thanks for posting this! This REALLY helped!

Thank you for detailing lesson.

@GiShockGo

4 жыл бұрын

Master Wong you’re very welcome. Please subscribe if you haven’t already.

Lifesaver, great video.

Thanx man excellent vid.

Many thanks sir, very well detailed and good tips. Best one !

Great vid ! Thanks!

Thanks for the awesome video!

Great video. A good watch but I would always go for a Solar/ Waveceptor model.

@GiShockGo

5 жыл бұрын

Happy Me completely agree, but unless you're buying a 5600 you'll be paying more for that functionality.

Muito obrigado, se não fosse você meu relogio nunca mais seria o mesmo! 👏👏👏👏

I would never! Never ever ever place any movement face down on anything other then the watch case or movement holder!

@MoiPloy

4 жыл бұрын

there is a big chance that you can bend the arms

@USMC-es4yy

4 жыл бұрын

Hell's yeah,a 600 dollar dust particle!

Your a life savior thanks

Thank you for this great video.

Thanks man☺️👍 you saved me a lot! 🤗

hey man thanks for sharing this step by step I followed and it works perfectly Thanks!!

Thanks man! this video helped so much !

This helped me! Thanks so much!

@GiShockGo

4 жыл бұрын

ross072566 awesome! Please subscribe if it helped. Means a lot to me.

Thanks well explained

Thank you very very much👍‼️🥇🇮🇹🇺🇸

Thanks brother keep um coming

Very beautifully explained 👍

Great👍🏻Details.

When the time comes, going to have it done professionally by Casio or watchmaker, so it cost me $25 plus battery? Well worth the peace of mind, and if they hose the Mud Master, it's on them.

Thank you for the great help

Everything was perfect in terms of steps sequence and safety, except one thing I wished you told us about it which is ,, how tight we should tighten the screws, I messed up my watch holes I don't know what to do. thanks for wonderfull tutorial.

Thak you So much bro.

You rock ❗️❗️❗️👏🏻👏🏻👏🏻👏🏻 Thank you so much ❗️❗️

What is the grey rubber cover part called? And is it essential? I had my battery replaced today and it immediately fogged up, took it apart and found the o-ring and rubber cover had not been put back!

Excellent work

Great job 👌👍 thank you very much 👍

Thank you very much . Helpful

@GiShockGo

4 жыл бұрын

Weilong Guo you’re very welcome! Thanks for watching

Thank you!

Thank you!!

thank you soo much

Dearest sir, you are a scholar and a gentleman. My watch is fully functional again!!!!!!! :D :D :D Thank you so much, may your day be filled with immeasurable blessings and wonder

Thank u very much, you save me

Thanks very helpful !!!

Thanks so much for your help, finally I was able to align everything as you show. Great video. 👍👍👍👍👍👏👏👏👏👏

Thank you a lot

THANK YOU!!! That was super helpful ♥️♥️♥️

dude !!!!!THANK-YOU !!!!!!!! got watch all fixed up thanks to you and saved money to Thanks again

Thank you very much for your video, it is very a fruitful support. Just one question : Why you didn't contact AC with minus (-) with your tweezers as indicated on the stickers ?

ขอบคุณครับ ผมฟังแล้วน้ำตาไหล ผมฟังไม่รู้เรื่อง

Thank you.!!!!👍🏽👍🏽👍🏽

Dude, this is creepy, today I received my batteries , I came from work and started replacing the batteries on the same watch you have on hand. When I was setting the date and time I was like WTF !!! Today is May 19 2020. Dude that's crazy when I hear you say May 19. Thanks for the video, thanks to you I was able to fix my G-Shock 👏👏👏👏👍👍👍👍👍👍👍👍

@GiShockGo

4 жыл бұрын

menjivar76 thanks for taking the time to post... glad the video helped. May 19th... crazy indeed

Excellent!!!!

Thanks!!

Thank you Sir!

Remove the gprb1000 function housing Can you put it on the cable frame gwg1000?

Hi just found your video, really helpful. Do you know what can I do, my dad’s watch doesn’t move the hands except for the seconds hand. Actually everything works on the watch except for the hands.

I don't think you need to remove the movement from the case in order to replace the battery. As others have noted, you risk getting dust in there.

@erwinsumang5046

Жыл бұрын

100+ on this. I don't see any reasons why he did it.

Any advice on getting the compass working again?? :/

Great video, especially the watch set up after the battery replacement. You saved me hours of reading from the G-shock manual. Many thanks.

I love your excitement about G-Shocks, but I wouldn't ever let you near mine to change a battery. 😂