Temperature need to be monitored for the fill otherwise you did not properly fill it

terima kasih untuk info tu..

Please follow zF instructions to check the temperature of transmission oil , go through all gears and top up as required . Else you might be over/ underfilling which is bad..Also as per ZF change only required @ 80- 100k..rest is all informative..good video

Hi, does the box deprogram if I disconnect the battery a quarter of a day? I have to replace my steering wheel so disconnect the battery for the airbag but I was told that the car box on the 330d e46 deprograms if you disconnect the battery a quarter of a .. is true ??

Then what about the used oil in the transmission,? Some amount of oil was in the torque converter and other place of transmission.

totally in wrong order tightened, and it has to be 10nm

@arandkay

5 жыл бұрын

They definitively did it on the wrong order, but tightening torque may vary. As per repair manual, if they are steel screws it is 10Nm, if they are made of aluminum it is 4Nm+45 angle torque. For the same transmission there are some kits with aluminum and others with steel screws. Although it seems that now all ZF kits ship with steel screws and gasket already on the pan. www.newtis.info/tisv2/a/en/e70-x5-xdrive35i-sav/repair-manuals/24-automatic-transmission/24-11-transmission-case-oil-sump/5edxi6F

Do u know purpose about the pump near mechatrnics

Thaks very much!

Where’s ur workshop at?

Sangat2 membantu

Why do all the sump pans and kits all come up for bmw as automatic transmission online I really don't understand it

what is the oil capacity of tramsmission

is the filter pan the same for 8HP45 as 8HP70 ?

@mattsbeamer

6 жыл бұрын

Eddy Gilbert hey, the best way to make sure you get the correct part is to use the website realoem .com Just enter your last 7 digits of your vin and search for the parts. It's what I do :)

Is it enough to just screw that bottom plug off, drain oil out, close it, and fill from the upper one till it bleeds? My f20 116i has 131tkm on it and from what I know it never been changed. Works perfectly imo. Is there a risk of clutch slipping after such a long oil change interval? There's still like 50% of old oil after this so that shouldn't be an issue? I'm NOT flushing it by any means, just change.

@gusseplays-norskgaming259

4 ай бұрын

my car has 161k km, and it got a full flush two years ago.

@villesalmi899

4 ай бұрын

@@gusseplays-norskgaming259 yeah i did flush too, it became little smoother 👍

I turkey Istanbul from you I have a tool that will be a question of protons brand, model 1998 Mitsubishi vehicle with the engine automatic transmission's my problem means I'm running but not moving is doing a very slow start automatic transmission I made new, but the car cıktı solenoid problem spot is not coming up, how do we solve, you must help me

What’s torque ?

N or D in red light?

It's screw not skru 😂

did you skru with 10nm?

@Galerikereta

6 жыл бұрын

forgot already what mechanic told me.. i guess it 10mm

@dmx2cool

5 жыл бұрын

@@Galerikereta you mean 10nm..... LOL..........................

My F30 is at 60000kms (36000miles). Is there a risk at changing the ZF8 fluid with drain and fill procedure?

@YousefHamdan08

5 жыл бұрын

Life time bro

@davidb649

5 жыл бұрын

@@YousefHamdan08 Theres no fuck as life time. Changed the oil and shift are much smoother.

@joegoh1968

4 жыл бұрын

ZF terminology for lifetime is 100000km if I am not wrong.

My car X3 transmission fault code 421342 please reply

Workshop dimana tuan?

@Galerikereta

6 жыл бұрын

+m farizol workshop kawan ni.. Z Twin Workshop- Wangsa Maju.

Hello, at how many KM is recommended to do this change?

@Galerikereta

6 жыл бұрын

+Shadowilla myself doit every 30-40k km

@kenlawton1531

6 жыл бұрын

Galeri Kereta not necessary wasting time and money.

@Paramnv

6 жыл бұрын

Shadowilla ZF is recommending to change oil approx every 80 000 - 120 000 km.

how many liters you put back in the gear box??

@Galerikereta

7 жыл бұрын

Around 5.5 liter.

@relaxat1732

6 жыл бұрын

but this is not enough the original change kit has 7 liters zf part number: 1087.298.365, and I asked ZF, there is original 8.5 Liter in there, but some oil is left in the transmission

@relaxat1732

6 жыл бұрын

I did also the change and it takes 5 - 5.5 liter, some oil remains in torque converter, I asked ZF and they said that it is normal

@wellwisher4383

Жыл бұрын

Please follow zF instructions to check the temperature of transmission oil and top up as required . Else you might be over/ underfilling which is bad..

u forgot the most important step, u should shift gears. P, R,D, 2,3

How many liters of the oil You guys change ?

@irrevocablephantasm7225

3 жыл бұрын

Their answer: yes

What kind of oil does it need for changing the oil please

@davidjacobs8558

4 жыл бұрын

ZF Lifeguard 8

@ambetguevarra4813

2 жыл бұрын

@@davidjacobs8558 is the zf lifegaurd 8 can be use for 118i 2006 model year?

Hantar kedai tukar brp harga boss

is this a 120d?

@Galerikereta

6 жыл бұрын

+relaxat 118i

@relaxat1732

6 жыл бұрын

ok it has the same part as 320d, as my car -> webcat.zf.com

We were advised this is a sealed gearbox and doesn't need to be done on ours this is what bmw said

Cowboys you skru'd it up

This looks similar to the F10?

@michaelbennett8847

6 жыл бұрын

What was the torque you used?

brpa kos habis

@Galerikereta

5 жыл бұрын

500

This manual or auto

@Galerikereta

11 ай бұрын

Auto

kalau tukar minyak gear tu.berapa lama perlu tukar minyak tu?

@Galerikereta

7 жыл бұрын

+Tyler Chiew untuk BMW, 80K KM perlu tukar. Lagi awal lagi bagus.

@tylerchiew6346

7 жыл бұрын

Wow..saya pakai proton wira saja .brp km perlu tukar?

@Galerikereta

7 жыл бұрын

+Tyler Chiew kete wira biasanya 40k Km max. Nak jaga gearbox setiap 20-30K Km

@tylerchiew6346

7 жыл бұрын

Ok..terima kasi utk info u...terbaik galeri kereta..

@Galerikereta

7 жыл бұрын

welcome

Km? 100.000....150.000.....?????thanks

Big mistake

OMG !!!!! The procedure is all wrong. This is how you screw up the transmission.

Kos?

@Galerikereta

7 жыл бұрын

+Mohd Na'aim Ismail dulu 500++

@mohdnaaimismail

7 жыл бұрын

500 per liter tuan?

@Galerikereta

7 жыл бұрын

+Mohd Na'aim Ismail total service

Follow this video as a guide? ... then good luck with your ZF gearbox failure 6 months down the line. So many mistakes, most of which could prove catastrophic in the near future.

@jigga594

5 жыл бұрын

Like?

@WeRemainFaceless

5 жыл бұрын

@@jigga594 Specific order of slacking / tightening bolts not followed. This is to prevent warping which will create an imperfect seal and leak oil slowly over the space of a few months, resulting in gearbox failure. Wrong amount of oil means potential oil starvation when making sharp turns. Didn't cycle the gear selection correctly before and after, meaning oil contaminated oil still in the torque converter and gears. Etc etc

@jigga594

5 жыл бұрын

@@WeRemainFaceless appreciate the info and time you took to answer. I am planning to do this maintenance job and I just wanted to gather all the info I could before I do it. Know that I wasn't trolling or anything like that. Thanks again!

@jigga594

5 жыл бұрын

@@WeRemainFaceless I also noticed that no gasket was changed in this or other similar videos. Does that gearbox (transmission oil pan) come with the gasket instaled already and its basically just thrown on and tigtened down to spec?

@WeRemainFaceless

5 жыл бұрын

@@jigga594 Happy to help. Gasket is a one time use only, so really should be replaced whenever removed. They're inexpensive and you'll kick yourself if you do the job and later have to revisit it again due to a bad gasket seal. There's quite a few stories of gasket failures causing headaches for DIY'ers so better safe than sorry ;)