The video and your very intuitive instructions helped me a great deal. I completed the whole job in just under three hours, including cleanup and test drive around the block. Thank you.

@AJ_MD

Жыл бұрын

3 Hours? Surely that includes 1 hour of beers afterwards. 🤣

Thank for a very clear and informative vid. Do make more of this awesome vid. U have got a clear voice! Thanks!

@PhillipsVision

3 жыл бұрын

Thanks for the feedback 👍

Thank you for being so descriptive step by step!!

@PhillipsVision

Жыл бұрын

Thank you 👍

why would you need to bleed the lines? The system was not opened to the air. I would only bleed lines if you had to replace a brake hose or caliper.

@straighttothepoint2717

3 жыл бұрын

you gotta bleed the lines because kia is stupid

@Hang10boards

3 жыл бұрын

Bingo... if the system isn't cracked opened there is no need to bleed the brake lines? I've owned 4 kia's... Rio to the 2018 Turbo Soul.... never needed to bleed lines from just compressing the caliper piston?

@thebeaglebeat3615

3 жыл бұрын

There is no need to bleed, unless your master cylinder is going to overflow, if someone added additional fluid at some point.

@simoncridge6578

2 жыл бұрын

Did they mention about unscrewing the master cylinder top top all brake fluid level to rise with caliper compression.

@jordentimperio7545

Жыл бұрын

Thank you

Good info however you didn't mention removing the cap on the reservoir to release pressure when pushing the calipers back on both the front and rear videos you posted

@ImDultra

9 ай бұрын

That helps a bit but there’s an air hole on the top of the cap that lets air out naturally

@tcatprwlr

9 ай бұрын

@@ImDultra wasn't aware of that.

Nice video! For the next one talk about the first cheap cars to own

@PhillipsVision

4 жыл бұрын

HEQTZ will do, thx

Can you do a bleed break video on the rio please

The rotors need replacing too on mine.

Hello, I like the way you use a C clamp to push back the caliper piston, on some other youtubers they show that you have to rotate the piston while pushing it back, what is you thoughts about it? Mine is a rio 2018 ex

@PhillipsVision

3 жыл бұрын

On the rear ones I believe you have to rotate them back down.

@jacquescote2585

3 жыл бұрын

@@PhillipsVision Thanks!

Good video but when you compress the piston bleed them then its a time saver.

You should take the caliper pins out and grease them every time.

@PhillipsVision

3 жыл бұрын

Thanks for the input 👍

@AK74Man87

3 жыл бұрын

@@PhillipsVision no problem

Thanks for your clear informative video....please i need to know the number and dimensions of this kia rio break discs and what info i need to buy one pair from the seller or online.

@PhillipsVision

3 жыл бұрын

Should just be able to search by your model and year. The year is very important since the KIA Rio changed around 2011

@khalidalaa8078

3 жыл бұрын

@@PhillipsVision thank you

I wish I could have seen you grease the brake pad though so that I'm doing it correctly. But otherwise, very informational! Thank you

@PhillipsVision

2 жыл бұрын

Just apply a small amount of grease to the backs of the pads (not the fronts) and the tabs where they slide in the rails

@qwazy01

Ай бұрын

Yeah, could have shown this on the second set of brakes since he was them next

Why would you bleed the brake line if you don't let air in line

I came to see where the lube goes and how to bleed the lines.. That was all that you left off lol

@eduardo9163

3 жыл бұрын

Same

Good video, but you forgot to tighten the lug nuts with the tires on the ground! Look out for a loose tire or two!

Signal light for Kia 2015

Do you need to bleed if you open the master cylinder?

Is this a 2012 model?

@PhillipsVision

3 жыл бұрын

2013

9