How To Change Fog Lights On Ford Escape

Автокөліктер мен көлік құралдары

Today I'm going walk you through all the necessary steps in order to change the fog lights on your Ford Escape. Below is a list of all the parts and tools needed for this project. If you found the video helpful, feel free to drop a thumbs up and as always thanks for watching!
SYLVANIA - 9145 Basic: amzn.to/3xsSmob
Upgrade SYLVANIA - 9145 (Whiter Light) SilverStar Fog Light Bulb - High Performance Halogen Headlight Bulb: amzn.to/3EffMAS
7 mm socket: amzn.to/3YQmjKA
Clip Removal Tool: amzn.to/3KxnBWX
11 Piece Craftsman Socket Set: amzn.to/410I9g1
Cordless Hammer Drill/Impact Driver Combo Kit: amzn.to/3XFmR4X
2 Ton Floor Jack: amzn.to/3I8mVEr
Disclaimer: Videos produced by DeuceLiter are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. DeuceLiter does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and DeuceLiter cannot be held liable if they cause any damage to their property. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said DeuceLiter cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code.
DeuceLiter may earn an affiliate commission if you purchase something through recommended links. #commissionsearned

Пікірлер: 29

  • @Claudio-yb1js
    @Claudio-yb1js9 ай бұрын

    Great video, super simple vs some of the other methods I looked into, thanks so much!

  • @mardones01
    @mardones018 ай бұрын

    Thanks. So simple than other videos !

  • @mikeecho33
    @mikeecho33 Жыл бұрын

    thank you, after watching countless videos yours was the only one that told me to turn the damn bulbs clockwise. Again Thank you very much

  • @deuceliter

    @deuceliter

    Жыл бұрын

    No problem!

  • @elizabethpeterson1644
    @elizabethpeterson16448 ай бұрын

    I used to have a 2015 Ford Escape SE. The easiest thing that I can changed the headlights in it. I would have a hard time in changing the fog lights on it. I don’t have that vehicle anymore. Now I drive a 2020 Ford Escape SE.

  • @thenatureofthenashes1362
    @thenatureofthenashes1362 Жыл бұрын

    Thanks. Much simpler than others make it.

  • @thesithkilla
    @thesithkilla11 ай бұрын

    Thank You

  • @alphonsotolbert7165
    @alphonsotolbert71658 ай бұрын

    THANK YOU very much!

  • @deuceliter

    @deuceliter

    8 ай бұрын

    No problem!

  • @MrWhatis
    @MrWhatis6 ай бұрын

    I WISH I seen your video 1st. broke my rear mount going through the front as shown on other videos,. will do the other side your way. thanks again

  • @deuceliter

    @deuceliter

    6 ай бұрын

    Ouch, sorry to hear that!

  • @helter-skelter2650
    @helter-skelter26506 ай бұрын

    Pull the black piece of trim around the lens off. I used a flat head screwdriver to start. Just had to be careful to not mess up the paint. 2 phillips head screws on the left hand side of the lens. Remove the whole lens. Much easier to change the bulb this way.

  • @ayemy

    @ayemy

    3 ай бұрын

    I peeled.the trim off and there's mostly just body behind the trim, no real access to the bulb. is there any way you can make a video showing how you do it

  • @helter-skelter2650

    @helter-skelter2650

    3 ай бұрын

    @ayemy you have to remove the screw beside the light and the entire light assembly comes out.

  • @ayemy

    @ayemy

    3 ай бұрын

    @@helter-skelter2650 thx i'll try tomorrow. got pissed off at the situation so i got drunk and bout beat it with a hammer luckily my wife grabbed it lol

  • @helter-skelter2650

    @helter-skelter2650

    3 ай бұрын

    @ayemy 🤣🤣🤣 we have all been there. I did this on a friend's car so it's not here for me to take a video of. But I quickly decided there absolutely had to be an easier way than this video.

  • @ayemy

    @ayemy

    3 ай бұрын

    @@helter-skelter2650 well i appreciate the tip, i'll let u know how it goes

  • @michaelgeorge8391
    @michaelgeorge83917 ай бұрын

    Great video. Be careful when handling the new bulb. I recommend wearing gloves so you don’t touch the bulb with your fingers. The natural oils from our hands can damage the bulb and cut down the life expectancy.

  • @bignewt41
    @bignewt418 ай бұрын

    Can the turn signal be accessed the same way?

  • @Genc.V
    @Genc.V2 ай бұрын

    Thnx for video. Is problem if put a led lamp on it?

  • @deuceliter

    @deuceliter

    2 ай бұрын

    No problem! If they are decent quality LEDs, I don't see why they shouldn't work.

  • @beckyquigley9665
    @beckyquigley9665 Жыл бұрын

    Do you have a video on how to change the entire assembly, not just the lights?

  • @deuceliter

    @deuceliter

    Жыл бұрын

    I do not, but if I ever need to, I will make one!

  • @danielgerman9041

    @danielgerman9041

    Жыл бұрын

    It's the small yellow light I think it's call parking light

  • @marcosberto1

    @marcosberto1

    Жыл бұрын

    @@danielgerman9041 I'm also looking for this video

  • @helter-skelter2650

    @helter-skelter2650

    6 ай бұрын

    ​@marcosberto1 pull the black piece of trim around the lens off. 2 screws on the left hand side of the bulb. Remove the whole lens. Much easier to change the bulb this way as well

  • @glenndaniels2806
    @glenndaniels28064 ай бұрын

    Perfect I wish the headlights were that simple

  • @ji19125

    @ji19125

    3 ай бұрын

    On this car? I think they’re a lot more simple, the only thing you need to remove is that rubber cap off and that’s it, even with big hands I was able to do it.

  • @Mryellowhead2704
    @Mryellowhead2704Ай бұрын

    Ford escape engineers are screwed up

Келесі