2015 Ford scape fog/turn signal/parking light replacement
Автокөліктер мен көлік құралдары
Hi in this video I will show you how to get to the fog light parking light and turn signal on your Ford escape.
Products used:
amzn.to/3bj6VTj
amzn.to/3bs4bCY
You can support me here thanks: www.paypal.me/nestor800
amzn.to/3PNivsf
Пікірлер: 123
I didn't think I could do it at first but after watching you I got in there and successfully changed the bulb. Yes you did help someone today. Thank you!!!!!!
@nestorautorepair
4 жыл бұрын
Heyyy your welcome... Thanks for the feedback
Ford really did their best here to make it super awkward to replace a darn bulb 😡
@nestorautorepair
4 жыл бұрын
Yes sir that's what I thinks as well
@jimnummerdor9687
Жыл бұрын
Would have been better if there was a little extra wire to work with for changing the bulb in the socket
@Binxalot
2 ай бұрын
Sadists made this light bulb assembly, I'm trying to change the bulb on the driver's side and there's a big plastic bumper piece in the way this is ridiculous
Thanks! Just save a ton of money doing this myself. Instructions were spot on!
@nestorautorepair
5 ай бұрын
You’re welcome boss
I’ve had the bulbs for this forever and have not been able to figure out how to change them until watching this, so thank you!
@nestorautorepair
2 жыл бұрын
You're welcome thanks for your feedback
You saved me $200! I was able to do this by feel without removing the tire, just loosening the splash shield and reaching in. Slide the bulb out, put the new one in and twist it back into place. Helps if you have tiny feminine arms too haha! Can’t see but once you do one side then other is a breeze
@nestorautorepair
4 жыл бұрын
Jijijiji feminine arms not Arno arm lol ,, thanks for your feedback boss
Thank you!!!!!! Your final advice on video was to drop wiring low in front trim and use two arms. My husband, son, and I spent over 2.5 hrs, taking turns. Your advice kept me from giving up and finishing this job on my own....YES! I had to lay under vehicle with arms over my head, and go by feel and logic. Didn't help that the old bulb was stuck though.
@nestorautorepair
2 жыл бұрын
Omg what a good story thanks for sharing and you're very welcome , good never give up , I'm so happy that you did it using my video
Great tutorial... That freaking car has no space to work what so ever... it is very tight...but with lots of patience got it done.. !!! Thanks
@nestorautorepair
4 жыл бұрын
You're welcome thanks for your feedback
Ford now offers a life time warranty on their engines and drive trains... they should do the same for their bulbs. Ridiculous that this should be so difficult, but clearly the dealers are telling FoMoCo they want some business in their maintenance shops. Thank you for posting.
@nestorautorepair
2 жыл бұрын
You're welcome sir
The auto shop wanted two hours labor to do this, definitely going to do this myself, thanks for the great video and information...saving me $200
@nestorautorepair
4 жыл бұрын
Your welcome thanks for your good feedback ,, good luck on it
@mikeb6902
3 жыл бұрын
2 hours???!!!!! sur aren't making new cars user friendly, any of my cars (2009 and 2016 Sentra and 2000 Trans Am) I can do both in about 20 min.
@nestorautorepair
3 жыл бұрын
Yes
Thanks a bunch Nestor! You are absolutely the MAN!!!!
@nestorautorepair
3 жыл бұрын
Thanks boss , thanks for your feedback
Thank you I changed mine today. God bless you.
@nestorautorepair
3 жыл бұрын
Thanks boss , your welcome
Thanks for showing the way. I took my wheel off which made the access easier.
@nestorautorepair
4 жыл бұрын
You're welcome thanks for your feedback, and thanks for your info about the tire I'm sure it will help others
Those bulbs were a bitch to get to. I ended up taking off my tire but in the end I finally got my blinker working again. Thanks man your video helped alot for a guy that doesn't work on cars. So keep on keeping on!
@nestorautorepair
3 жыл бұрын
Thank you sir, I'm glad you did it ,, thanks for your feedback boss
I found it was easier to unclip the wire to the bulb holder. Then I twisted the bulb/holder out and removed it. I then put the new bulb in the holder, twisted the holder into the housing, and reclipped the wire. This allowed me to do it with one hand inside instead of two. My arm was too big to fit otherwise.
@nestorautorepair
5 ай бұрын
Nice thanks for sharing
Followed your procedure with the addition of removing the tire. My arms and shoulders are larger than yours. Successfully replaced the bulb. Used surgical glove on one hand to put new bulb in, because you don’t want to Touch new bulb and get oil from your hands on the bulb causing premature burn out.
@nestorautorepair
4 жыл бұрын
Ok boss thanks for sharing your tips
@mikemarshall3073
3 жыл бұрын
You're thinking of halogen headlight bulbs. These bulbs will not fail from the oil on your fingers, they just don't get hot enough.
@nestorautorepair
3 жыл бұрын
Ok
Thank you. 15 minute bulb replacement using your directions 🕺🏼❤️🇨🇦
great job man, thanks
@nestorautorepair
4 жыл бұрын
Thanks boss for your feedback
Ford Escapes suck! These bulbs, you have to remove the wipers and cowl to replace the battery, the cabin air filter is a nightmare! My next will be a Honda CRV. But this video is awesome! Thank you!
@nestorautorepair
3 жыл бұрын
Thank you sir yes Honda much easier to work on thanks for sharing , and thanks for your feedback
You did help... Thank you.
@nestorautorepair
3 жыл бұрын
Thanks boss your welcome , thanks for your feedback
Good god, makes think it would be better if the driver’s one would just burn out! Thanks for posting as I now know it would likely take me and my abilities all day!
@nestorautorepair
3 жыл бұрын
Lol yes thanks for your feedback , best luck
Thank you!
@nestorautorepair
8 ай бұрын
Your welcome
Thanks, it looks like this is going to be fun
@nestorautorepair
10 ай бұрын
Yes thanks
Thank you! 🤘❤️
@nestorautorepair
2 жыл бұрын
You're welcome
You definitely helped. Do you know what bulb number it is?
Thank you!!😅
@nestorautorepair
11 ай бұрын
👍🙏🏻
Thanks again I had to use both hands like you said 💯🇺🇸🇵🇷
@nestorautorepair
2 жыл бұрын
Si gracias , thanks for your feedback
2014 Escape 1.6l. The easiest way to replace the driver side turn signal bulb is to remove the air filter cover & filter(4 x 8mm bolts). Then remove the lower filter housing (2 x 8mm bolts) on the left side close to throttle body tube. Unhook One other strap on intake piece. Bottom lifts out easily.
@nestorautorepair
2 жыл бұрын
Ok thanks for sharing
Thanks man
@nestorautorepair
4 жыл бұрын
You're welcome
Gracias hermano orita mismo lo cambio el mío!
@nestorautorepair
3 жыл бұрын
Dale gracias Marcello
Yo thanks I'm going to change all my lower lights fog,turn n parking, side marker lights to LED👀💯👍🇵🇷
@nestorautorepair
2 жыл бұрын
Dale de nada , gracias
I’m just wondering if you can take that black grill off instead?
@nestorautorepair
4 жыл бұрын
That will not help in this case ,, sorry
Hola. Pudieras darme el link para comprar esas luces? Las de color naranja.
@nestorautorepair
5 жыл бұрын
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F271142328224
Can i ask you something ? When i unlock my ford kuga, there is this yellow light that turns on in the fog light. What bulbs is that ?
@nestorautorepair
4 жыл бұрын
Hello yes I believe one is parking light and one is turn signal
@burghyr
4 жыл бұрын
@@nestorautorepair yeah. What bulb type is the parking light ? H7 ? H11? You know what i mean 😂. Thanks man
@d.beamer6907
4 жыл бұрын
Gabrieleboy go to auto zone and request the part at the counter or you can check the part book. On mine it was 2827
@nestorautorepair
4 жыл бұрын
@@d.beamer6907 thanks
2014 Escape 1.6l. On the passenger side….I was able to drive my escape onto ramps. Remove the splash guard like you do to change oil and reach in by the washer tank. There was enough room to get the turn signal bulb out. I didn’t try the running light or fog light bulb. You might try that method to confirm.
@nestorautorepair
2 жыл бұрын
Good thanks for sharing
What kind of bulb did you use? Is that 3157?
@nestorautorepair
Жыл бұрын
amzn.to/3PNivsf
If you arm is small enough, you can reach in from the top and change the bulb with one hand. My wife just did it. You don’t have to remove anything. It’s not easy though
Carnal este tipo de foco está en la 2019 Ford Escape s.e sin los focos de niebla?
@nestorautorepair
4 жыл бұрын
Hola carnal pienso que si, no an mejorado
@joeg.1119
4 жыл бұрын
1NITIDO ey mi escape trai focos que no son leds y se los pensaba cambiar pero en linia no viene nada d cómo cambiar los focos o de qué tipo son como es 2019 no hay mucha información todavía
how hard is the other side (driver Side)?
@nestorautorepair
5 жыл бұрын
The other side is easier because there is no washers flue tank
@CrIMiN8l
5 жыл бұрын
Thanks
Well Ford....I love my Escape but you seriously need to fire the idiot that came up with this. I could literally change all 4 headlights in my old Camaro in the time this takes.
@nestorautorepair
3 жыл бұрын
Yes Trent lol not easy
which bulb would you get to replace this?
@nestorautorepair
3 жыл бұрын
www.autozone.com/collision-body-parts-and-hardware/roof-marker-light-mini-bulb/sylvania-basic-t-mini-bulb-194nall/319051_0_0?spps.s=4913&cmpid=LIA:US:EN:AD:NL:1000000:GEN:71700000069889792&gclid=Cj0KCQiAv6yCBhCLARIsABqJTjb355vQK99-yFpopt1JTrKHUFaf5QpzBnlmMqdHn_BuXdlFfZFPcqIaAlGOEALw_wcB&gclsrc=aw.ds
@rickquinones7611
2 жыл бұрын
@@nestorautorepair thank you
@nestorautorepair
2 жыл бұрын
You're welcome
Looks like you were delivering a baby
@nestorautorepair
4 жыл бұрын
Hahahahahah ok
Did not show the bulb tho
What was the name of the bulb, good video by the way, thanks..
@nestorautorepair
5 жыл бұрын
Just tell them at the auto part 2728 parking lights
@mikejensen7617
4 жыл бұрын
I think they mean't 2827.
@nestorautorepair
4 жыл бұрын
Lol ok thanks
Leave it to Ford to make what should be stupid simple a royal PITA. Love their trucks and SUVS but their engineers couldn't design their way out of a paper bag.
@nestorautorepair
2 жыл бұрын
👍
You don't need 2 hands, after you peel back the inner Fender well, which is plastic. All you do is take your hand in there and squeeze the clip on the back of the bald and remove The Wire first and then pull the ball out that way 2 hands, there's not enough room to get in there to do it comfortably, especially if somebody has never done it before!and if it says a specific size, don't say we'll change it to this size and metric, that's not how it works. It's a specific size for a reason when you switch it up to metric, it's either too small or just a little too big and you can go ahead and screw up. Plastic clips and plugs and screws and bulheads as well. Exclaimed information point. Please be very thorough when you're instructing. People on how to do things you were shown how to do things. We'll have the same courtesy to explain to other people how to do things. There is a proper way and an improper way to do things. And the reason why you're not telling people how to do it exactly is because you were never shown properly in the first place.. Because I am older than you. I'm doing this as a teaching lesson for you as well! Being in the auto repair business think of it like this.... How many times did you take a suggestion from someone who showed you and ended up? Screwing up a part really, really bad. But as you did it more you got better at it because you curticked it? You gotta be straightforward with People if you want them to Understand what you are trying to teach them. If you do it the same way that you were shown and a person ends up doing it wrong, then they might come back and complain to you. Example.... You never stressed that this whole assembly is all plastic. That the white clips that hold those clips a fragile and break real easy also that there is a screw that is at the bottom of the fender that you can't see. Also that they need a "Philips" screw driver and not just a screw driver. Never " Half ass it"
Yo, the drivers side is different.
@nestorautorepair
3 жыл бұрын
Much easier
this is waay too involved for replacing a bulb
@nestorautorepair
Жыл бұрын
Hi I agree
what a pain in the ass
@nestorautorepair
3 жыл бұрын
Yes it is
You guys are mechanics?? Because you're doing it the hard way
@nestorautorepair
4 жыл бұрын
We are ,, but if you have a better way share it please
@joeljolly697
4 жыл бұрын
@@nestorautorepair ok if you are going to change the left directional or left turn signal, you'll realize that in the Bumper there's a Black cover, just above the fog and turn light, that black cover can easily be removed, and you will see a space that will allow you to see what you are doing, and then with your left hand you can reach the bulb trough the center part of the bumper.
@nestorautorepair
4 жыл бұрын
Mmmm ok thanks for the info,,
@threeriverav
4 жыл бұрын
@@joeljolly697 How do you remove the black cover
@briangiller5253
4 жыл бұрын
Joel Jolly this my be true but not what the manual describes either. I will sum the video up though: Ford sucks. Ford obviously doesn't want people changing these at home anymore and are coming up with more and more ways to ensure that people head to the stealership. I have several 88-90 automobiles and I could change this bulb in any if them in under a minute.
Not claire at all
Ford Escape is the worst piece of shit made. Even something as simple as this becomes a nightmare, worst purchase ever.
@nestorautorepair
5 жыл бұрын
Yeah I don't know why,, I guess they want to do it for you and charge you ,,
@staceygroom9291
5 жыл бұрын
@@nestorautorepair no doubt, that's how the whole car is built.
Thank you 🙏🏼
@nestorautorepair
4 жыл бұрын
Your welcome