Thanks for sharing your advice. After several minutes of brute strength I finally managed to wrestle the tight bolt on the lawn mower. I fitted 2 spacers and the cut lawn looks even better! Cheers😊

@DADDELIVERS

Ай бұрын

Oh that's really great to hear thanks - and thanks for taking the time to leave a kind comment. Just changed another blade on a newer Flymo and it took so long to try to budge it! Good luck with the mowing and thanks again

Oh thank god for you, I was about to take mine back to Tesco’s as I couldn’t get the thing to unscrew, and instructions are for aliens 🎉❤ x x x

@DADDELIVERS

2 ай бұрын

Thanks for the very kind message Ali and really pleased to hear this -- hope you managed to get it budged!

Thank you so much. I was struggling and with your instructions all worked!

@DADDELIVERS

2 ай бұрын

Hi Julie, thanks for taking the time to leave a kind comment. Really pleased it might help! Good luck with your flymo!

Had this with me for a year and always felt frustrated that it could cut shorter today i seen this video and it has totally changed my garden look although cut my finger a bit while taking blade off but technology is blessing thankyou for this video now i look this machine and my garden 🏡

@DADDELIVERS

Жыл бұрын

Thanks for taking the time to leave such a kind message and sorry to hear about your finger. Really pleased it might help, thanks again.

Just bought one for my dad, thanks for clearing up the spacer problem. We thought all three needed to be fitted 😂

@DADDELIVERS

Жыл бұрын

Fantastic, thanks for taking the time to leave a kind message and good luck with the flymo!

Great video my first mower and wasn’t sure about how to fit the spacers.but now I know thanks 🙂

@DADDELIVERS

Жыл бұрын

Brilliant - thanks for the kind comment @Greengekko1993 really appreciate it!

Your instructions have been brilliant!!! Thank you

@DADDELIVERS

Жыл бұрын

Thanks for the kind message Carolyn, really pleased it might help.

@carolynlewis1306

Жыл бұрын

@@DADDELIVERS Was just assembling the new mower n was changing the cutting height. Nearly gave up till I saw you video which really helped! Can thank you enough!

@DADDELIVERS

Жыл бұрын

Thanks Carolyn - some are saying it's too hard to budge, so good luck!

@carolynlewis1306

Жыл бұрын

@@DADDELIVERS it was very hard to budge, I cut my finger but didn't give up. I'll leave the cutting height exactly where it is for now! Many thanks

Helpful thankyou. I can't budge the nut it's on so tight. I'll give it another go..

@DADDELIVERS

2 ай бұрын

Hi Janet - thanks for the kind comment and really sorry it won't budge. A few others have the same problem and I just got a new Flymo and couldn't budge the nut! Have you maybe tried squirting some WD40 down the side of the bolt (if you have any! You can get small cans in the supermarket...) I've made a new video to show how I got mine moving, it did take a lot of effort. Wear gloves because I cut my hand!!!

@janetdunbar3106

2 ай бұрын

Thank you for all your help I did put WD40 on it and I've managed to turn and get the nut off, my spacers are now on and the grass has been cut. Thanks again

@DADDELIVERS

Ай бұрын

That's great to hear Jane - thanks for the update!

I just bought the easiglide 330v today, ive put it all together and need to add the spacers but the bolt wont budge to get the blade off to put the spacers in. looking for help on here and your video shows it coming off straight away !!!!!! aarrrrrggghhhhhhh Im even more stressed now!

@DADDELIVERS

2 жыл бұрын

Agh that is so frustrating Susie - sorry to hear this. I dont know what to suggest: hopefully the video shows the right direction and I'm sure you've got the flymo spanner the right way round... It also sounds like its brand new so it's not been ground in by dirt Weird suggestion - you may already have tried this - would it be worth using it a couple of times to see if that helps loosen it? If not if it were me I would try a little squirt of WD40 around an edge of the bolt to see if that would help - but I'm not an expert. Would love to know if you do manage to get it off Thanks for the kind question and good luck!

@greengekko-ps3hr

Жыл бұрын

Same with mine very tough to turn as mines new but I just made sure the spanner they give you is well on then turn it anti clockwise and it will go

@helenmarshall7594

Жыл бұрын

@@greengekko-ps3hr ah! I’ve just bought a new one and I cannot get the bolt to budge either…. Any suggestions?

@daiboy8076

Жыл бұрын

@@helenmarshall7594 I have tried, wd40, hammers, nuclear bombs, but it will not shift!! any one who has any help?

@helenmarshall7594

Жыл бұрын

@@daiboy8076 ah, success, I traipsed back up to Argos with the mower and the helpful young man there managed to free it off (although he struggled also). I’d obviously loosened it 😉

The bolt on mine seems to have been fitted by Thor. Even a proper wrench can’t unscrew it

@DADDELIVERS

Жыл бұрын

Thanks for the kind message and sorry that it's a struggle - been getting many comments saying the same. Wonder if heating it up (in the sun???) or a squirt of WD40 might help - I'm sure you've tried these already. Good luck with the sword in the stone

@LongBoi.

Жыл бұрын

@@DADDELIVERS I hadn’t yet actually, thank you!

@terencehorsnell9264

10 ай бұрын

I wouldn't have thought so - it's a plastic bolt!@@DADDELIVERS

@daeva4176

3 ай бұрын

Same with mine

@nicknind63

3 ай бұрын

Retaining bolt will not shift. Sending it back. Not fit for purpose.

Just bought a new flymo and because grass is long wanted to put the spacers on but can't shift the bolt it is on so tight, seem to have tried everything any suggestions please

@DADDELIVERS

Жыл бұрын

Hi Suzanne Thanks for the kind question and sorry you're finding it difficult - I'm having a few comments where others are finding this. If it were me, I'd try squirting some WD40 on it wherever close to the thread of the bolt to see if that'd loosen it. Hope you manage to get it moving and good luck 🤞

good one

@DADDELIVERS

Жыл бұрын

Thanks Indrajith!

This is our second flymo 300 we sent the last one back because the nut on the blade wouldn't budge. The nut on the blade on this new one still will not move to get the blade off.

@DADDELIVERS

2 ай бұрын

Hi Yvonne - thanks for the kind comment and really sorry to hear this. I just got a new Flymo and had a really hard time getting the nut to move so appreciate how difficult it is. I had to use the old orange tool I had because the new one seemed a tiny bit thinner - and squirted WD40 down the side of the bolt. Hope you manage to get this moving.

I can't get the bolt to budge and I feel as if I'm going to break-through spanner

@adelethomson9530

5 ай бұрын

Me too. Having the same problem

Legend

@DADDELIVERS

4 ай бұрын

Thanks for the kind comment John and good luck with your flymo!

Tried this and the bolt is half way out now just keeps spinning! Won’t tighten or come loose anymore any thoughts?

@DADDELIVERS

3 ай бұрын

Ooer, thanks for the kind question Nathan - that's frustrating. If it were me, I'd probably try to pull it out with pliers and a squirt of WD40.. - it sounds like it's maybe out of the screw thread but not out? Hope you manage to find a fix...

After attempting to change my blade, my bolt is in an infinite loop and won't tighten or loosen. It has made the lawnmower unusable. Any ideas on how to resolve?

@DADDELIVERS

Жыл бұрын

Hi Rory Thanks for the kind question and gawd, so sorry to hear this - that's really frustrating. I'm sure you've tried these but if it were me I'd try a squirt of WD-40 using the long straw to try to get it in to the thread And I'd even probably try to heat the blade up by leaving the mower upside down in the sun or by even more direct means! Just in case it expands the blade to loosen the grip... As you can see, sadly I'm not an expert. But really hope you can get the blade moving again

@lindao1327

Жыл бұрын

Just bought one of these and trying to take bolt/blade out to insert the spacers but the bolt will not budge. I’m turning it with tool that came with it anti clockwise as per instructions but it’s not turning! Help!

Bolt won't shift. Tried WD, tried an adjustable spanner, tried brute force. It will not move. Where do I go from here?

@DADDELIVERS

10 ай бұрын

Really sorry to hear this - that is really frustrating. Have you contacted Flymo? I'd be upset if I had to buy one of those bolt socket drivers for things like car wheels plus the bolt might be too big for one of those anyway. Hope you manage to find a fix.

@terencehorsnell9264

10 ай бұрын

Got a lawn mower repair man to shift it. Took him five minutes.@@DADDELIVERS

@Yvonne-lv1dm

3 ай бұрын

Same here

@rafh2753

3 ай бұрын

You'll have to use heat. Get a butane can and heat up the bolt head and then remove.

@philipmcfarlane

2 ай бұрын

@@rafh2753 Don't think so. It's plastic.

Slashed my fingers on this thing! Horrible mower

@DADDELIVERS

2 ай бұрын

Really sorry to hear this - I sliced mine on a new Flymo trying to do this so I feel your pain, literally.

@Spudthestaffie

2 ай бұрын

@DADDELIVERS they shouldn't come like this... It's dangerous! Anyway, luckily my neighbour sorted mines for me!

I do hope you CLEAN your mower after every use!!

@DADDELIVERS

2 ай бұрын

Thanks Heather!

Rubbish.. nuts never that easy to undo

@DADDELIVERS

10 ай бұрын

thanks you make me feel strong