Very informative video thank you.

Nice video, i want go to repair my proton inspira meow meow😂

When he giggled while wiggling the old cv axle joint, A true mechanic. 😂😂

@TCsAnythingGoes

Жыл бұрын

I didn't know mechanic does that..... I am turning from a casual DIYer to a true mechanic.

Very nice 👍

I would have liked to see more video of you actually taking everything out. That and was it necessary to drain the transmission fluid to do this job?

@TCsAnythingGoes

Жыл бұрын

Thanks for your comment. Will take note on it. Yes, it is necessary to drain the transmission fluid else you will have transmission fluid leaking from the gearbox once you remove the driveshaft. That would be very messy.

Hey bro, why you refill CVT fluid after? is that mandatory after changing drive shaft? love your videos btw

@TCsAnythingGoes

Жыл бұрын

i drained the CVT fluid before removing the driveshaft. This is neccesary unless you want CVT fluid flowing out once you remove the driveshaft. And I figured since I already drained it, might as well fill in fresh fluid (some people will just pour back the old fluid in which I do not recommend)

May I know how often do you change these? Could you make a video on cleaning the throttle body too?

@TCsAnythingGoes

Жыл бұрын

My car is around 290k km already. You only change your driveshafts when you notice problems with it. Among common problems: - clunking sound when doing either max left or right turn + accelerating. - vibration from under the car at certain speed - steering wheel vibration (all wheels are balanced) the problem I had was a soft clunk on right turn + accelerating. And also most noticeable problem was vibration from under the car when I go above 110km/h. Can't even go to 140km/h without feeling like the car is going to shake itself to death.

does a bad cv axle causes the car to be misaglign and makes the steering wheel to shake quite hard if i drive past over 120 km/h? I've recently changed to new 4 set of michelin tires thinking it's because of the second hand tires i'm rocking with 3 days ago lol but now the car still move to the left when driving straight and now im suspecting it's the cv axle because i already change the tie rod last year and the ball joint mechanic says still usable. what your thoughts on this bro?

@TCsAnythingGoes

Жыл бұрын

while I can't say that your specified case is related to cv axle but a faulting CV axle will cause vibration at certain speeds as well as alignment issues.

Where did you get that metal undertray? Was it something you had made custom?

@TCsAnythingGoes

5 ай бұрын

i got it from some FB seller way way back around 10 years ago. I think his name was Rainbow Pen or something. Thinks he operates out of China now.

I'm installing my cv axle too this week does your car have abs anti lock braking system? I have abs on my lancer.

@TCsAnythingGoes

Жыл бұрын

Yes, my car has ABS. The CV axle for all lancers and inspira 2008 and above is with ABS.

@chrisr.986

Жыл бұрын

@TC's Anything Goes does the cv axle have an abs ring. For example do I have to remove old abs ring from old cv axle? Or the new one should come come with abs ring? Or this is is no abs ring?

@TCsAnythingGoes

Жыл бұрын

@@chrisr.986 there is no ABS ring. From the looks of it, it most likely read from the teeth at the driveshaft. doesn't seem to have a separate hardware for it. just remember to take the sensor out before punching the driveshaft out of the hub.

@chrisr.986

Жыл бұрын

@@TCsAnythingGoes okay, so disconnect/ unplug the abs sensor? The abs sensor next to the wheel hub assembly?

@TCsAnythingGoes

Жыл бұрын

@@chrisr.986 The ABS sensor on the wheel hub assembly. Its held by a 10mm bolt if not mistaken. its somewhere in the video. Just undo the bolt and take it out, hang it somewhere away from the hub.

Sampai patah brekabar tu ye😂 guna jek senang sikit, oil seal tak tukar sekali ke bang ? Alang² dah buka baik tukar baru .. apapun good job..boleh refer video ni utk Inspira saya nanti..TQ ✌️

@TCsAnythingGoes

21 күн бұрын

oil seal masa tu baru tukar tak berapa lama dulu. so takde la tukar sekali. Terima kasih support channel i yg tak seberapa ni.

@nazronmdisa7105

21 күн бұрын

@@TCsAnythingGoes ok bang proceed 👌

the cost for the driveshaft rm390 per set or each ? Looks original

@TCsAnythingGoes

Жыл бұрын

it was RM390 for both sides. But I just checked the same link i purchased it and it is now RM440 for both sides.

@muhammadilham7596

Жыл бұрын

@@TCsAnythingGoes what type of brands for the driveshaft.. can you give me the link ??

@muhammadilham7596

Жыл бұрын

@@TCsAnythingGoes it is sama length for both sides or different length for left and right??

@TCsAnythingGoes

Жыл бұрын

@@muhammadilham7596 Left and right is different length. The brand is BOS. Link in the description. Hope this helps.

What socket size is the big CV Axle nut?

@TCsAnythingGoes

Жыл бұрын

Those are 32mm sockets.

@JJRevs

Жыл бұрын

@@TCsAnythingGoes Thank you

What's your mileage?

@TCsAnythingGoes

Жыл бұрын

295k km. I wanted to wait till 300k before I changed the driveshafts but its vibrating pretty bad that I do not dare go above 110km/h

@dredman1628

Жыл бұрын

@@TCsAnythingGoes Is that 295,000km on the original CVT transmission? Very impressive if so. Has the transmission ever given you any problems?

@TCsAnythingGoes

Жыл бұрын

@@dredman1628 Yes, I am still with the original CVT transmission and also engine. So far both have not given me any problems (besides a leaking head gasket 2 years back) What is impressive is ..... i have never gotten the CVT famous SLOW DOWN warning before yet.

@dredman1628

Жыл бұрын

@@TCsAnythingGoes That is good to hear. I am now on 100,000km with my Lancer and the only major problems I have encountered thus far are a crack in the OEM radiator on one of the plastic end tanks about 2 years ago, a leaking head gasket about 18months ago, and now an intermittent starting issue where the car does not crank when the key is turned, which has been identified as a problem with the starter. I just had the starter serviced last month which seems to alleviate the issue. The engine and transmission both still work great. I’m hoping that can continue till 300k like yours as well !!!

@TCsAnythingGoes

Жыл бұрын

@@dredman1628 these cars seems to go on pretty good as long as we do take care of it. As opposed to what people normally do, I only change my CVT fluid when I start hearing whining sound from the gearbox. But I do change both the bottom and top filter together with the fluid change. So far, running strong and each fluid change last me between 60k to 90k km depending on how and where I drive. I did have the radiator plastic end leaked on me once and I had the plastic bits changed only. The radiator core was still in good condition (workshop says its the best he has ever seen on a 10 year old car, mainly because the system always had coolant inside)