How long has this hack worked out for you ? Need to know how soon/ if I need to buy a replacement 😅
@edwardyew802 күн бұрын
Hey can i ask for ur help putting it on my car
@daddyren4 күн бұрын
How long need to wait after start enjin.
@BostonKnick4 күн бұрын
Amazing video! Helped me out a lot thank you!!
@westlynnpark5 күн бұрын
So helpfull. Really appreciate your work.
@order90665 күн бұрын
Thank you.
@andyrocket6 күн бұрын
Is it easier If removing the bumper first?
@dubmaster1x8 күн бұрын
Very compact. Can I put it in the boot?
@TCsAnythingGoes8 күн бұрын
of course you can. just need to pull longer cables.
@yogig627111 күн бұрын
Excellent information
@nazronmdisa710515 күн бұрын
Tukar Mounting ni memang tak guna langsung jek bawah enjin ke bang untuk support engine dari senget masa ikat skru tu..dasyhat la..camna buat tu
@TCsAnythingGoes14 күн бұрын
kalau nak selamat, pakai support engine. Kalau ikut cara I, tukar satu persatu mounting........ ada 3 mounting yg support engine dan i pakai jek tuk align mounting ke-4 yg i keluarkan.
@nazronmdisa710514 күн бұрын
@@TCsAnythingGoes ok faham 👍
@auliadianperdana15 күн бұрын
the best way i found it.. thanks a lot buddy
@CarrentalClassicevents15 күн бұрын
Great video
@muhammadfarhan582615 күн бұрын
Cant wait for the brake reservoir flushing!
@dredman162816 күн бұрын
Was there an under engine splash shield? Under my 2008 Lancer looks just like this, so I'm wondering if it maybe was removed by a repair shop and not replace (or fell off somehow). Or do these cars come with the transmission and oil pans fully exposed.
@TCsAnythingGoes14 күн бұрын
they come with the bottom fully exposed. My alloy splash shield is an add on i purchased outside.
@HeidiT48616 күн бұрын
Worked for me! Thank you for sharing your hack. 😊
@nazronmdisa710518 күн бұрын
Sampai patah brekabar tu ye😂 guna jek senang sikit, oil seal tak tukar sekali ke bang ? Alang² dah buka baik tukar baru .. apapun good job..boleh refer video ni utk Inspira saya nanti..TQ ✌️
@TCsAnythingGoes17 күн бұрын
oil seal masa tu baru tukar tak berapa lama dulu. so takde la tukar sekali. Terima kasih support channel i yg tak seberapa ni.
@nazronmdisa710517 күн бұрын
@@TCsAnythingGoes ok bang proceed 👌
@tomaszseweryn383418 күн бұрын
Thank you!
@kaz550120 күн бұрын
Saved me alot of frustration with my Lancer, drove down the freeway and one of the strips disappeared, checked other side and held in by 2 clips, bought a set of clips on eBay because i couldnt order from the link (im in Australia) and with some "firm negotiation" they went into place nicely, thank you 👍
@davidkurniawan194021 күн бұрын
Where is the location of the bleeder coolant ? Thx
@dragon1leg22 күн бұрын
thank you very much
@greeneyesduhh881423 күн бұрын
THANK YOU !! I was able to fix my rear mirror FOR FREE 😭 I got tired of my mirror going down whenever there was a crack on the road 👍🏻
@JosePerez-kd7yf23 күн бұрын
It works for my Mitusbishi Outlander 2018. Thank you!
@tra3337223 күн бұрын
Do i still need to fill up to 2GR level after driving a few days or just Full line on the right? My car is 2GR. Thanks
@TCsAnythingGoes23 күн бұрын
only need to fill up to 2GR level once. Drive around and it will go back down to Full line. From then, just top up as required (normally there is no need to top up unless there is a leak or overheating)
@tra3337223 күн бұрын
@@TCsAnythingGoes Thank you
@UnpopularOpinions__26 күн бұрын
my left side cam is inverted, how can I invert it? the rotate setting not working
@justshmee92326 күн бұрын
Good video for a curious person like me! ❤
@fazrulrusdi370928 күн бұрын
Supervision is the aftermarket replacement right? How do u find its quality after long term use?
@TCsAnythingGoes26 күн бұрын
I actually converted it to a D4S LED about 1 year after this project. Link below. Have been using the D4S LED till today and its performing flawlessly. kzread.info/dash/bejne/g5ppxdZvgZvJc5c.html
@fazrulrusdi370925 күн бұрын
@@TCsAnythingGoes owhh thanks..will try the conversion bulb as well
@jeffcyho29 күн бұрын
Was removing the mirror needed?
@TheLazyEyebrow29 күн бұрын
Much appreciated for filming all this, helps knowing what I'm about to be getting into
@motolocounoАй бұрын
2009 vellfire engine runs,cannot select gears,power steering not working any ideas thanks
@afiqzmanАй бұрын
Dekat rain sensor ada tak gel dia? Saya punya problem autowiper tak cun sgt function dia. Hujan dah lebat tapi slow je wiper.
@siewguatlim1953Ай бұрын
Why I cant remove my ball joint like yours?
@senachan93Ай бұрын
do you think can fit 2 2.5' projector on both sides?
@leongcn-ke4lxАй бұрын
Hi TC, planning to get an OBD2 reader, as after cleaning my TB, engine still rough when warm. Hope U can share where U got yours. Thanks and for a lovely day. Cheers
@vincenkang7687Ай бұрын
How to install switch lock on Vellfire?
@TCsAnythingGoesАй бұрын
your vellfire should come with it....... isn't it standard on all vellfire and alphard models?
@jebatchan3763Ай бұрын
Hi bro, is it normal when e-brake not engaged the lock not working. my switch only work after engage the e-brake. Btw mine is Inspira 1.8 Manual
@Art55VandelayАй бұрын
Complete hack here. I just finished this job. A nightmare project. My car has >140K miles, so of course the locking clips on the plastic electronic connectors snapped off when I tried to remove to remove the connectors. Will have to do without the locking clips I guess. The PCV(?) valve hose broke just like the gentlemen's hose in the video. Went to Toyota with the Lexus hose part number I found on the internet. They figured the numbers out but there was not one hose at any Toyota dealer in the entire city of Houston. So, went to Autozone and they sold me an overpriced piece of spooled hose with an ID close to the ID of the broken hose. I made it work by using high quality hose clamps and tightening them down snugly The banjo bolt was a disaster. It is nearly impossible to get it in straight with the banjo washers and filter basket in place. I worked on this a long time and finally got it in straight, I think. Overall, I would not do this job again. My leak was tiny. I would just let it leak next time and if it got annoying enough, I would take it to a garage where they have done the job dozens of times. Just not worth the hassle.
@michaeljoncour4903Ай бұрын
alternators used to be at top of motor and were actually accessible, sorry but you fibbed, plain to see, i HATE modern cars, all deliberate to discourage owners from working on their cars.
@michaeljoncour4903Ай бұрын
easy accessibility ! are you serious?
@MrFxr150Ай бұрын
Very good sharing, brother 👍🏼
@rpc72Ай бұрын
Are the two motor fans on the 2012 Alphard the same part? Are they interchangeable? From the parts list I see one is 31180 and the other is 31130. Thanks!!!
@alifrafi527922 күн бұрын
yea i need answer to this too!😅
@TCsAnythingGoes6 күн бұрын
@@alifrafi5279 no they are not interchangeable. Different thickness.
@davebesanko5263Ай бұрын
Thankyou so much I've had so much trouble with my beam led pointing too high and too much light sideways makes sence now
@onedegreewest9303Ай бұрын
LED headlights is a straight fail in our county. Such a pity
@marklance033Ай бұрын
Did you ever change the rear gasket?
@ottonieldaАй бұрын
Hello, how can I create a vehicle to use in the 360 view app. since the models that are there do not fit my car
@TCsAnythingGoesАй бұрын
What car are you driving? There are players with 360 function built in nowadays. This video is an older model whereby the 360 module is independent and can work as long as you have a video input on your player.
@whitstableguy1Ай бұрын
Hi TC, Really good video mate! One thing you left out was the retention of the factory rear camera that I assume would be annoying 6volt, do you have any info on that? Cheers, Phil UK
@leejackson6511Ай бұрын
Hi have u ever added the auto fold mirror 🎉module for srs 20 alphard
@TCsAnythingGoesАй бұрын
Nope unfortunately not since my car came with the auto fold when I bought it.
@hausler21Ай бұрын
Good tutorial bro....thanks heaps!!
@kiritua16-or3jhАй бұрын
Hi any tips help my 2 van doors does not open automatically anymore what can I do or idea why its does that?
@TCsAnythingGoesАй бұрын
there is a button near the steering that disables the auto door. Most people accidentally press it when they are wiping their cars.
@mohamadrizuan1374Ай бұрын
Bro , thankyou for this tip , im glad to watch it . Tq so much
@KomodoSoupАй бұрын
Hi TC, that is a very informative video. How did you disassemble the mirror. I think I missed that part. Also, should I only use a Macdonald's receipt? Should I only use Malaysian coins? Where can I buy that shirt?
Пікірлер
How long has this hack worked out for you ? Need to know how soon/ if I need to buy a replacement 😅
Hey can i ask for ur help putting it on my car
How long need to wait after start enjin.
Amazing video! Helped me out a lot thank you!!
So helpfull. Really appreciate your work.
Thank you.
Is it easier If removing the bumper first?
Very compact. Can I put it in the boot?
of course you can. just need to pull longer cables.
Excellent information
Tukar Mounting ni memang tak guna langsung jek bawah enjin ke bang untuk support engine dari senget masa ikat skru tu..dasyhat la..camna buat tu
kalau nak selamat, pakai support engine. Kalau ikut cara I, tukar satu persatu mounting........ ada 3 mounting yg support engine dan i pakai jek tuk align mounting ke-4 yg i keluarkan.
@@TCsAnythingGoes ok faham 👍
the best way i found it.. thanks a lot buddy
Great video
Cant wait for the brake reservoir flushing!
Was there an under engine splash shield? Under my 2008 Lancer looks just like this, so I'm wondering if it maybe was removed by a repair shop and not replace (or fell off somehow). Or do these cars come with the transmission and oil pans fully exposed.
they come with the bottom fully exposed. My alloy splash shield is an add on i purchased outside.
Worked for me! Thank you for sharing your hack. 😊
Sampai patah brekabar tu ye😂 guna jek senang sikit, oil seal tak tukar sekali ke bang ? Alang² dah buka baik tukar baru .. apapun good job..boleh refer video ni utk Inspira saya nanti..TQ ✌️
oil seal masa tu baru tukar tak berapa lama dulu. so takde la tukar sekali. Terima kasih support channel i yg tak seberapa ni.
@@TCsAnythingGoes ok bang proceed 👌
Thank you!
Saved me alot of frustration with my Lancer, drove down the freeway and one of the strips disappeared, checked other side and held in by 2 clips, bought a set of clips on eBay because i couldnt order from the link (im in Australia) and with some "firm negotiation" they went into place nicely, thank you 👍
Where is the location of the bleeder coolant ? Thx
thank you very much
THANK YOU !! I was able to fix my rear mirror FOR FREE 😭 I got tired of my mirror going down whenever there was a crack on the road 👍🏻
It works for my Mitusbishi Outlander 2018. Thank you!
Do i still need to fill up to 2GR level after driving a few days or just Full line on the right? My car is 2GR. Thanks
only need to fill up to 2GR level once. Drive around and it will go back down to Full line. From then, just top up as required (normally there is no need to top up unless there is a leak or overheating)
@@TCsAnythingGoes Thank you
my left side cam is inverted, how can I invert it? the rotate setting not working
Good video for a curious person like me! ❤
Supervision is the aftermarket replacement right? How do u find its quality after long term use?
I actually converted it to a D4S LED about 1 year after this project. Link below. Have been using the D4S LED till today and its performing flawlessly. kzread.info/dash/bejne/g5ppxdZvgZvJc5c.html
@@TCsAnythingGoes owhh thanks..will try the conversion bulb as well
Was removing the mirror needed?
Much appreciated for filming all this, helps knowing what I'm about to be getting into
2009 vellfire engine runs,cannot select gears,power steering not working any ideas thanks
Dekat rain sensor ada tak gel dia? Saya punya problem autowiper tak cun sgt function dia. Hujan dah lebat tapi slow je wiper.
Why I cant remove my ball joint like yours?
do you think can fit 2 2.5' projector on both sides?
Hi TC, planning to get an OBD2 reader, as after cleaning my TB, engine still rough when warm. Hope U can share where U got yours. Thanks and for a lovely day. Cheers
How to install switch lock on Vellfire?
your vellfire should come with it....... isn't it standard on all vellfire and alphard models?
Hi bro, is it normal when e-brake not engaged the lock not working. my switch only work after engage the e-brake. Btw mine is Inspira 1.8 Manual
Complete hack here. I just finished this job. A nightmare project. My car has >140K miles, so of course the locking clips on the plastic electronic connectors snapped off when I tried to remove to remove the connectors. Will have to do without the locking clips I guess. The PCV(?) valve hose broke just like the gentlemen's hose in the video. Went to Toyota with the Lexus hose part number I found on the internet. They figured the numbers out but there was not one hose at any Toyota dealer in the entire city of Houston. So, went to Autozone and they sold me an overpriced piece of spooled hose with an ID close to the ID of the broken hose. I made it work by using high quality hose clamps and tightening them down snugly The banjo bolt was a disaster. It is nearly impossible to get it in straight with the banjo washers and filter basket in place. I worked on this a long time and finally got it in straight, I think. Overall, I would not do this job again. My leak was tiny. I would just let it leak next time and if it got annoying enough, I would take it to a garage where they have done the job dozens of times. Just not worth the hassle.
alternators used to be at top of motor and were actually accessible, sorry but you fibbed, plain to see, i HATE modern cars, all deliberate to discourage owners from working on their cars.
easy accessibility ! are you serious?
Very good sharing, brother 👍🏼
Are the two motor fans on the 2012 Alphard the same part? Are they interchangeable? From the parts list I see one is 31180 and the other is 31130. Thanks!!!
yea i need answer to this too!😅
@@alifrafi5279 no they are not interchangeable. Different thickness.
Thankyou so much I've had so much trouble with my beam led pointing too high and too much light sideways makes sence now
LED headlights is a straight fail in our county. Such a pity
Did you ever change the rear gasket?
Hello, how can I create a vehicle to use in the 360 view app. since the models that are there do not fit my car
What car are you driving? There are players with 360 function built in nowadays. This video is an older model whereby the 360 module is independent and can work as long as you have a video input on your player.
Hi TC, Really good video mate! One thing you left out was the retention of the factory rear camera that I assume would be annoying 6volt, do you have any info on that? Cheers, Phil UK
Hi have u ever added the auto fold mirror 🎉module for srs 20 alphard
Nope unfortunately not since my car came with the auto fold when I bought it.
Good tutorial bro....thanks heaps!!
Hi any tips help my 2 van doors does not open automatically anymore what can I do or idea why its does that?
there is a button near the steering that disables the auto door. Most people accidentally press it when they are wiping their cars.
Bro , thankyou for this tip , im glad to watch it . Tq so much
Hi TC, that is a very informative video. How did you disassemble the mirror. I think I missed that part. Also, should I only use a Macdonald's receipt? Should I only use Malaysian coins? Where can I buy that shirt?