Thank you for your quick reply and information, you have been a great help, many thanks to you

Thank you, worked for me!!

Do you know how to change the Outside Tempature displayed in the status bar, from Celsius to Fahrenheit??

Hey, thank you! Finally that is solved. Does anyone know how to stop the unit screen going blank when I indicate right? Once the right indicator is off the screen returns...

what launcher are u using pls. send link or tell app name

Hi, Thanks for the information. I configured the same system and setup in my Renault Duster 2015 RxZ model, but it's now showing anything when I open the door on screen. Please suggest.

@mechanicallymindedmike9677

2 жыл бұрын

Do a hard reset m8

Hi Mike, Do you have any idea if in "Factory Settings" is any option to display the battery voltage with decimals in "Car Information"? I saw on other players that is not a problem for CAN BUS module to read this info from ECU with one or two decimals.

@mechanicallymindedmike9677

3 жыл бұрын

Let me investigate and find out. I don't use the option often. I'll reply asqp

@NN-oy8ru

3 жыл бұрын

Thank you Mike! Waiting for your answer.

Hello, nice content! How do you turn off the door chimes when you open the driver door? The noise is unbearably loud and would be nice to be able to turn off! Any advice or feedback to solve this is greatly appreciated! Thank you

@mechanicallymindedmike9677

3 жыл бұрын

Does it only chime when keys left in ignition and door open? What car is it by the way bro

@majingaknight

3 жыл бұрын

@@mechanicallymindedmike9677 Hi.. i installed a similar unit but in my case i want the opossite.. (to keep that beep) when locking/unlocking the car.. it's a 2015 USDM Toyota Corolla.. Would appreciate your advice..

@mechanicallymindedmike9677

3 жыл бұрын

@@majingaknight I think you're referring to the beep when you lock and unlock your car like a beep from the alarm system yeah? If so think you gunna need to but some software and code it. I do coding for vag group cars but not Toyota unfortunately.

@majingaknight

3 жыл бұрын

@@mechanicallymindedmike9677 Thanks.. at least you helped me pointing me to a direction to go, since i'm new to this and din't have a clue on what to do!! (y) ..

how does the wiring from the car to the headunit work. do you use the CANbus module?

@mechanicallymindedmike9677

3 жыл бұрын

Yes fella. Mine came with the stereo. All plug n play mate.

Hello sir I have followed the steps from beginning to end, but the problem is still the same there may be other ways that can help me for this problem thank you.

Thanks for the content. The rear door of my Mk6 Astra we OK but the front ones were reversed. . . . . . . . .Not any longer!

@mechanicallymindedmike9677

Жыл бұрын

Glad it helped m8

Hi I've tried that on my settings looks the same as your but dident work

Hi.. nice info.. I have a reverse camera and it doesn't trigger automatically. I need to select the Aux app to view the reverse camera. Can I have the correct setting for this

@mechanicallymindedmike9677

3 жыл бұрын

Check your plugged into the correct video/yellow wire. Also check the blue wire. Sometimes they come pre cut and they need to be bridged together

Is there any way to disable the door display completely? Whilst keeping the CANBUS plugged in of course?

@mechanicallymindedmike9677

Жыл бұрын

Hi Mo, Not that I'm aware of tbh m8. I believe it coded within the software itself. Coded within the ROM

Is this work in Tiago xt

Thanks Mike, that was really bugging me, I've had a look but I can't see how to turn of the reversing camera, mine comes on due to the canbus decoder, do you how to do it please.

@mechanicallymindedmike9677

3 ай бұрын

So the newer models come with a same coloired wire pre cut and bridging them together turns it off. Others you'll need to use a multimeter. Find the wire that goes 12v feed positive when you go into reverse. Then chop that wire. Should sort you out mate.

I have a Peugeot 307 year of 2005 original car radio RT3 VAN. I bought a junsun 2G 32G B steering wheel control android car radio. its function just the volume + - button. it does not detect open doors mileage

@mechanicallymindedmike9677

3 жыл бұрын

On the 2005 307's i do believe it doesn't show which door is open b4 the stereo install. Therefore it will not show after the stereo install. Sorry mann

Hi mate I have the same head unit . Do u know how to switch off the reverse camera as i dont have a reverse camera and everytime i reverse the car the screen goes blank. Would appreciate your advice.

@mechanicallymindedmike9677

3 жыл бұрын

Yeah I do ironically. It was pissing me off too. Slap a quid vid up tmr for u m8.. bit of loom adaptation required mate 👍

@Amir.253

3 жыл бұрын

if you still haven't fixed it just disconnect the reverse wire it should be labelled reversed cut it or smth

@mechanicallymindedmike9677

3 жыл бұрын

From memory there's a blue loop 8bhad to cut. I'll be pulling my unit out shortly so show u which 1 I cut

❤❤❤

Please I have the same head unit . But I don't find this option. Can you write me ID canbox you set in at yours.

Hi i have donw a factory reset and now the screen is stuck on logo and wont budge , do you happen to know how to get into recovery mode ,

@mechanicallymindedmike9677

2 жыл бұрын

Did u press the reset button on front?

Sir i have followed your step by step procedure properly. But I am not getting the car door opening image over the screen. Is there anything else to be done like any app yo be install for this function I will be waiting your reply or guidance . I hope you will nit disappoint me.

@mechanicallymindedmike9677

3 жыл бұрын

Is it the same head unit fella? And is your installed unit plugged into Cambus system? If not, then it will not register that your doors are open

@sheetalprasad5312

3 жыл бұрын

@@mechanicallymindedmike9677 i didn't get you please tell me what is unit plugged cambus system? Where it is available and how to install it . Awaiting your reply

@mechanicallymindedmike9677

3 жыл бұрын

@@sheetalprasad5312 when I bought my head unit on Ebay- the unit i bought came with a 'Canbus' box which plugged directly into my car (VW Passat 2010) where did you buy yours from and in what car is it in fella? Not all systems are compatible see

@sheetalprasad5312

3 жыл бұрын

@@mechanicallymindedmike9677 Actually mine is Honda city ivtec cvt 2019 model and with the car system was digipad and now i git replaced with circuit i 10.1 inches music system. Is this compatible for this function.

@mechanicallymindedmike9677

3 жыл бұрын

@@sheetalprasad5312 personally I would consult the seller. When I bought my unit the sold it with a Canbus box which plugged into the cars wiring loom and then the stereo. Its what enabled the door picture thing on mine

How do I change mine from km to mph?

@mechanicallymindedmike9677

3 жыл бұрын

I found a download online that I installed. But it kept reverting back to km/h. So gave up.

Hello i'm from India, in my car that door opening signal is not showing how to enable that bro

@mechanicallymindedmike9677

3 жыл бұрын

Hi mate. Did the car door opening appear on any other screen previously? Eg b4 stereo install my car doors would and still appear om car dashboard. When I plugged in the stereo and canbus box it now appears on both

@RayanM007

3 жыл бұрын

@@mechanicallymindedmike9677 no, My car is Tata nexon

@mechanicallymindedmike9677

3 жыл бұрын

@@RayanM007 I'm sorry to tell you that the stereo only replicates what the car used to do. It will not show it on the android headunit unless it was on display previously. Sorry mann 😞

@RayanM007

3 жыл бұрын

@@mechanicallymindedmike9677 It's okay Brother 👍

@prabhasfans5073

2 жыл бұрын

@@mechanicallymindedmike9677 if the car MID shows the doors open pic then can it be displayed on stereo too if there is no canbus installed