How To Change Camshaft Position Sensor! Ford Ranger V6 3.0 (1998-2011) P1136 P0340

How to change a CMP on a 2005 Ford Ranger with the v6 3.0. Codes P1136 & P0340
Like, Comment, & Subscribe!

Пікірлер: 7

  • @bellanadolski6209
    @bellanadolski62099 ай бұрын

    Very good Video

  • @Brandonjaf
    @Brandonjaf11 ай бұрын

    This was perfect, thanks!

  • @partsandprojects

    @partsandprojects

    11 ай бұрын

    No problem! Glad we could help!

  • @YT_PUP_FX
    @YT_PUP_FX2 ай бұрын

    I have a 1999 3.0 v6 and I’ve heard there’s more than 2 types of the camshaft sensor. I know it’s the part number P0340 but is there more than one type of camshaft sensor?

  • @leonardodemara8004
    @leonardodemara800410 ай бұрын

    First of all, excuse my poor english, i'm not from usa, i have and 05 ranger 3.0 and sometimes it starts like a charm even not letting me release the key from the start position, other times y could crank 10,15, 20 seconds and nothing, but when this happens i close de ignition switch, open it again and then start again it will run great, and other times it turn on the engine but with a rough idle, for like 5 to 15 seconds.... it may be the cam synchro? thanks in advance for your time and knowledge! p.d i`m thinking on replacing the cam syncrho or ckp, or both , I al ready replace the coilpack ( months ago)i'm thinking it could be too but idk, my mechanic can`t find the problem, i`m also thinking it could be a defective coilpack, because it recently also start cutting the rpms (idk how to say it, but it`s when it stops revving and then start reving on and on at certaing rpms 4k)

  • @partsandprojects

    @partsandprojects

    9 ай бұрын

    Do you have any codes? Check engine light

  • @partsandprojects

    @partsandprojects

    9 ай бұрын

    When the car is idleing rough does the check engine light flash? These motors are notorious for issues with exhaust valves pitting into the head. I would conduct a leak down test before going any further

Келесі