How To Change a Moen Shower Head
Тәжірибелік нұсқаулар және стиль
This would be a perfect first DIY project as the need for tools are low and you literally can be completed this project in a couple minutes. When looking for a new shower head just make sure you match the finish of the new shower head to the other trim pieces in the bathroom. Also pick up a roll of teflon tape to ensure no leaks after install.
Example shower head in the video (Chrome Finish)
homedepot.sjv.io/QveZ3
Пікірлер: 26
Perfect! My shower head broke, watched this, 3 mins later, new one installed no leaks!
@EverydayHomeRepairs
10 ай бұрын
Boom 👊
Mines so stuck😫😫😫got rags, wrench…🤬
This helped when I recently changed my shower head. Thanks Scott!
@EverydayHomeRepairs
5 жыл бұрын
Better add Handyman to your resume! 👍
Thanks for going slow and including details and suggestions! You sound like you have a lot of patience. Good teaching.!
Just saw your video on fixing an outdoor faucet. Great job! Thanks so much for the VERY well explained info. You just got a new subscriber. Keep the information coming.😀
@EverydayHomeRepairs
5 жыл бұрын
Thanks for the kind words Paul. We just bought a new place with no shortage of things on the To Do list. Time to start pumping out the videos 👍
Thanks for getting right to the point!👌 No frills. 😎 The homeowner suggested I watch/find a KZread video about this before upgrading my 🚿 shower head. Glad and reassured to know that the task was as intuitive as I thought. 🙂 Hello new shower head!
Good video Scott. Need to do this soon. Thanks!
@EverydayHomeRepairs
3 жыл бұрын
Any time!
This was so helpful!! Thank you ((:
I did it! Thanks.
Thank you! That helped.
If only a few minutes was the answer in my shower. The outer end of my pipe isn't threaded; instead, it has a round ball with a center hole for the water. The ball appears to be permanently attached to the pipe, maybe soldered? A loose collar slides over the ball with inside threads; the shower head (with outside threads) screws into the collar. If the entire pipe has to be replaced from inside the wall, sure sounds risky for a DIY. What to do?
Where does one get training on a toothbrush? You handled it really well in this video.
@EverydayHomeRepairs
4 жыл бұрын
Hahaha, years of training 😉
My wrench won't tighten enough to grip the shower head. Just slides around instead of turning the shower head. Don't know what to do :(
@EverydayHomeRepairs
4 жыл бұрын
🤔 are you using a crescent wrench, channel locks, or another type?
@Skeptique
4 жыл бұрын
@@EverydayHomeRepairs It's a crescent wrench and the connection is round so it's just not gripping it. Getting my uncle to check it out and hopefully he has the right tools. Thanks for your video and for responding!
@EverydayHomeRepairs
4 жыл бұрын
@@Skeptique if it is only round then I would use a pair of channellock pliers. Also, if you want to not damage the shower head put a towel or paper towel between the round threaded part of the shower head and your pliers before loosening.
Moen eco performance shower head is the worst shower head I’ve experienced
My only question is how tf do you shower lmao
I once bought a shower head from walmart and i never needed to use wrench or teflon tape. You just turn it counterclockwise to remove it and just put a new one in. There was no need to hold the bar with one hand. Id say this is more complicated design. Id make sure i never buy Moen shower head
@lvega5606
9 ай бұрын
You're lucky. I have a moen showerhead and I can not get the f&%$ing thing off to replace it with a nice showerhead. I am literally going to call a plumber.
@user-lw7jh6qf6k
4 ай бұрын
@@lvega5606same 😭 it’s so tight in there i used W-40 and everything and i’m scared of breaking the shower head