Fair amount of force was needed to remove my bulbs and wanted to be certain I was doing it right before applying more pressure than needed on landlord's lights. This video was a perfect reassurance. Thanks.

Thank you for uploading the tutorial, my partner hadn't any idea and a bit like directions, he doesn't like to ask... I found this really easy to follow and done in 10-15 seconds :) Thanks again, Di.

No worries share with whoever you like. Great led bulbs ,every one who has seen them intend to buy some.

seriously. I have been trying to get this bulb out for a while. as soon as he said push and twist I knew that was the answer. I am a very handy person and I did not think of that. THANK YOU!

@dereton33

10 жыл бұрын

No problem , regards, al.

Thanks for posting! This type of plug with the twist was easy to understand in your video. It took me 10 seconds to get it out, once I knew what I was doing. Another 10 to put the new one in, excellent!

@dereton33

8 жыл бұрын

+Rpnewberry No problem. Al.

Thanks for the video, after I watched it I was absolutely know what I am doing and I did change 2 light bulbs ;)

7 years later and it was the only video I could fine that taught me the “wiggle it around a bit to get it loose” method, thanks!

@dereton33

4 жыл бұрын

No problem.

I can have all of mine working now, as the bulbs had gone in two of them and was frightened of breaking them. Now I know how to do the clips. I can't believe anyone has disliked this. Thank You so much.

@dereton33

7 жыл бұрын

No problem. Some people just like to dislike anything.

Thank you for posting, very useful.

thanks! this was really helpful, even three years later

I know it is so simple now but it was causing me loads of grief. Thanks a lot mate. Much appreciated.

@dereton33

3 жыл бұрын

No problem

Absolutely perfect instructions. I had no idea and changed them in 5 mins. Thanks

@dereton33

9 жыл бұрын

Alex Conner No problem Alex, pleased you managed it OK. Al.

That's great, my bulbs would not come out but your video gave me the confidence to give it another go with determination (there were no clips) and I got it out. Thanks

@dereton33

6 жыл бұрын

No problem

figured out how to take the bulb out after watching your video, thanks

@dereton33

Жыл бұрын

No problem.

Thank you for the helpful video!

The clips got me....... but thanks for the instructions all sorted and nice bright office now!!

Dear, thank you so much for this video, you saved my lava lamp! It came with this GUI10 bulb, I have never seen such a thing.. Thank you very much for the instructions, very helpful!

@dereton33

4 жыл бұрын

Glad I could help

Hi Bill , there is a rubber suction cup that you can get for those bulb fittings , it acts like a suction cup and allows you to push up and twist the bulb out. Regards, al.

Good guidance and instructions, what a difference a few years make in LED technolgy the current LED GU10 `s (2016) are even brighter still, a better warm white colour and focused

@dereton33

7 жыл бұрын

Thanks Chris.

So simple when you know how! Thank you so much for making what seemed like a daunting task into a breeze :)

@dereton33

3 жыл бұрын

You are so welcome!

Perfect idea and was thinking the very same thing would be necessary. My rubber gloves did not grip it enough. Will try the suction cups.

Thanks - didn't know how to take out the clips :)

thanks for posting this.

Thanks so much for this vid! I needed help with mine and now it's all done thanks to you!

@dereton33

7 жыл бұрын

+Sadaf Ahmad no problem

Awesome! Thanks for making this. I was giving up until I found yours!

@dereton33

7 жыл бұрын

No problem.

@mariagreen1354

5 жыл бұрын

These damn light won't come out and my lazy husband hasn't changed the bulbs. Please help

Very helpful. Cheers mate.

Nice one mate thank you

Thanks, this worked for me, just twisting it round and round losens it!!Was about to call a handy man in

@dereton33

7 жыл бұрын

No problem.

Well needed video!! Thank you!!

@dereton33

9 ай бұрын

You are so welcome!

Thank you so much for this video, it was so helpful. I can’t thank you enough 🙌🏾

@dereton33

5 жыл бұрын

No problem.

Many thanks for taking the time and trouble to post the video.

@dereton33

6 жыл бұрын

No problem.

The suction cups did it ok at my friends house as he also had one stuck in the holder. regards al.

Thanks a lot. You have helped me a lot.

@dereton33

2 жыл бұрын

You are most welcome

Thank you sir! No idea it was so simple

@dereton33

Жыл бұрын

Glad it helped!

Thanks for the tip. I fixed all the bathroom lights 👍.

@dereton33

4 жыл бұрын

Excellent!

Awesome video. I had no idea how to get the spring out...:)

@dereton33

5 жыл бұрын

No problem

Thanks! Excellent. Helped me a lot :)

@dereton33

7 жыл бұрын

+TopMRide No problem

Thanks, that made it easy.

@dereton33

5 жыл бұрын

No problem.

Another good video, thank you very much

@dereton33

4 жыл бұрын

No problem John.

Still helpful, thank you! 👍🏻

@dereton33

3 жыл бұрын

You're welcome!

I love youtube for things like this. I have to say tho, that is a lot of views for literally changing a lightbulb :)

@dereton33

7 жыл бұрын

The simplest things in life are the most sort after.

Thank you

@dereton33

3 жыл бұрын

You're welcome

very helpful - thanks

@dereton33

5 жыл бұрын

No problem.

Fantastic

Thank you! Exactly what I needed to know! :D

Thanks a lot

@dereton33

2 жыл бұрын

Most welcome

I'm fairly hopeless at handy work like this but this video helped a lot. Cheers

@dereton33

10 жыл бұрын

No problem Chris , regards, al.

That spring likes to fly around and impact stuff because it is not easy to grab. So figured I needed safety glasses. I also need to hold the lamp with one hand and insert the spring with the other. In my case it was literally hanging on wires.

Thank you,

@dereton33

7 жыл бұрын

No problem.

thanks!!!! It helped A LOT! :-)

@dereton33

9 жыл бұрын

Cathy bj No problem, Cathy. Al

Thanks

@dereton33

Жыл бұрын

No problem. Thanks for the donation.

Amazan and simple trick

@dereton33

2 жыл бұрын

Thanks

Thanks, thanks, thanks, thanks...

Thnx a lot bless u

@dereton33

2 жыл бұрын

Most welcome

thank you so much. it was really helpful :)

thanks :)

Have one without the clips and it's a bastard to sort getting the bulb out. Cheers fella hope to manage.

I have been looking for info or a tutorial how to replace the good old traditional screw on light bulb socket for one this pins LED lights, Any one with any helpful info?

I am sure you will find a big difference .Don't forget to check out my website and tell all your friends . (I having a tough time getting it under way) Many thanks al . Ps face book is good too.

thank you so much for this video i managed to put it back in cos of this video it was doing my head in frustrating me i wanted to smash the damn bulb i got clip back in didn't get bulb in got bulb in couldn't get clip in the bulb wouldn't stay in kept falling down i had to hold bulb with my thumb then put clip in & it worked so relieved cheers

Great videos. Helped me out a few times. Did u get the gu10 bulbs at a good price n if so we're from as they seem to be really expensive cheers

@dereton33

9 жыл бұрын

Jason Court You can get them from my website or Amazon.

Thanks, you saved my life from the darkness xD

Try Phillips hue

How are the holding up now, are they still going. Just swapping out some old led to new 100° angle bulbs cool white 340 lumins they seem a lot bright then the old ones. Hope they last. Screwfix seem to be the cheapest and the best so far.

@dereton33

6 жыл бұрын

I have still not had a single failure of any of these lights so far SS. Just lucky I guess.

Nice one Alan shared with my twitter account, if you need better ones led.london® give us a try Regards James

Thanks for the video. Am after some insight please! We have flush spotlights but unlike these ones, they are very long with a GU10 fitting on the end. Using Sylvania bulbs and trying to refit but to no avail. In short can get the GU10 bulb to line up with the housing so that it is flush but then cannot turn it to get it to engage in the housing. Because the face of the bulb is not flat and instead has a pattern on it neither of the suction devices work. Neither does the key I've used before (a flat piece of metal that has a tooth at either end to engage with the edge of the bulb) as it simply does not fit. HELP! Any suggestions about how to get the bulb to engage please. I am so not a fan of GU10s :( Thank you.

@dereton33

9 жыл бұрын

Simon Griffiths You may a strange fitting that takes GU10 bulbs with a longer length than the standard ones . If that is the case then a new light fitting will be your best bet.

I fucking love you! just what I needed.. was going crazy here :)

I noticed that it states on the package that they are 240V, the bulbs I want to change out are 50W/120V, can I use the 240V models like you have here? (Canada)

@dereton33

9 жыл бұрын

***** No they will not work, they must be the same voltage. Al.

Hi, I'm at my wits end! I've 2 down lights & they're both above the shower & have chrome housings with a glass centre, which I had to screw off to get at the bulb which is in a recessed housing. There are no clips holding it in so only way I can see to get it out was with suction cup so attached the suction cup & tried to turn & pull & it pulled the glass off the bulb!? Having to try & glue the glass back on to have another go now.....ffs

@dereton33

Жыл бұрын

Great fun them bulbs Philip.

Goood

Can you please show how to take that glass covering mine doesn't have any clip on it

@dereton33

4 жыл бұрын

You need a special tool, a small sucker device that sticks to the bulb.

@don215able

4 жыл бұрын

@@dereton33 Well its all in vain they say they don't make bulbs like that anymore now the i have to change the whole housing and change it to an leg looks ugly but it's modern sigh 😅

Thank you I’m a lady can do by myself

@dereton33

3 жыл бұрын

Well done.

Great Video! Hope you don't mind us sharing with our Twitter followers. Please give us a shout if you need any more LED bulbs :)

Are these Led lamps 240v ?

@dereton33

5 жыл бұрын

Yes.

Will this make my electricity bills lower?

@dereton33

7 жыл бұрын

Yes.

pro tip: don’t let the spring bounce off inside the ceiling because you will never see it again and will have a hanging light

@dereton33

2 жыл бұрын

Cheers.

State of society today you have do enlighten folk with a step by step guide to change aklight bulb. We had jokes bout that in school .... bugger me this has to be a joke????

@dereton33

6 жыл бұрын

No joke I promise, just take a look at the hits for this video.

But what if the bulb won't move what to do

@dereton33

3 жыл бұрын

a new light fitting ?

Lol mine won’t come out thank you will keep trying

@dereton33

4 жыл бұрын

Keep trying.

Zindo aaaa?

@dereton33

2 жыл бұрын

Thanks.