Products used: ALL CLEAN: bit.ly/AllCleanAPC RINSELESS WASH: bit.ly/RinselessWash WATER SPOT REMOVER: bit.ly/WaterSpotRemoverDIY IRON REMOVER: bit.ly/3GfY4iM PERFORATED SYNTHETIC DECONTAMINATION TOWEL: bit.ly/FineGradeClayTowel PANEL PREP: bit.ly/DIYPanelPrep

@patrickschutte

Жыл бұрын

Hopefully these products will also come to Europe in the Netherlands

Some call me lazy some call me efficient. I'm definitely gonna use that line

@diydetailofficial

Жыл бұрын

it's a classic line from Yvan lol. And actually he isn't lazy, he's very hard working, just has a very particular way of doing things without wasting time, energy or product

@havingtoomuchfun4806

Жыл бұрын

He’s a genuine guy that’s a genius in communicating his vast knowledge.

@diydetailofficial

Жыл бұрын

Thank you, too kind.

@denzeljackson6505

Жыл бұрын

@@diydetailofficial I think with the amount of knowledge he has and time spent doing detailing he just makes things look effortless

Like Yvan I'm was born in the 60's. I'm a c3 fan but I'm also a corvette fan of any years. I have my 78 corvette for 34 years. Now all I use is Diy detail products on it. I use a mist of rinceless wash and ceramic gloss every time I drive back in the garage. My interior have the interior ceramic coating and my tire are wash with all clean and topped with diy detail tire shine.

@diydetailofficial

Жыл бұрын

Thanks for sharing

Discovered your channel a few months ago and working through your videos - you guys are great and really deserve more subscribers!

@diydetailofficial

11 ай бұрын

Welcome aboard! We're just getting started:)

Great video, love that your doing what the customer wants.

@diydetailofficial

Жыл бұрын

Thanks 👍

Exactly the video I need, since I haven’t gotten your polish test, but do want to ceramic coat. Thanks guys!

@diydetailofficial

Ай бұрын

Glad it was helpful!

You guys are awesome. Thank you for all of the hard work and content 🤘😎🤘

@diydetailofficial

Жыл бұрын

Thanks for watching!

Great and informative as always, love this format. 🤟

@diydetailofficial

Жыл бұрын

Glad to hear it!

Awesome video! Yvan,you sure did look good in that corvette!

@diydetailofficial

Жыл бұрын

Thanks! 👍

Started using DIY rinseless wash in the hot weather and shade ..Really speeded my process up with its great cleaning ability...Keep the great videos going have learned so much..

@diydetailofficial

Жыл бұрын

Wonderful!

Just what I needed! Pretty awesome you can spray the water spot remover and let it dwell for a long time.

@diydetailofficial

Жыл бұрын

Just don’t allow it to dry on the surface.

Great video guys. Can't wait to apply this to the truck this weekend. (minus the ceramic coating) Waiting on my All Clean and Gold Standard wool and waffle pads to arrive. As always go team mullet.

@diydetailofficial

Жыл бұрын

Enjoy the coating

I have a 2004 Z06 which I love! 541whp. It's fun! Red with Mod Red interior. That's a nice Z06 droptop. Lots of nice tips and tricks in this video. I've also had a Lingenfelter 4th gen Corvette with a 383 stroker engine.

@diydetailofficial

7 ай бұрын

All very cool rides

@J1Z06

7 ай бұрын

Thank You very much!

@J1Z06

7 ай бұрын

@@diydetailofficial Thanks. I had three Mustangs(one ran low 7's 1/4 mile) and a pair of 80's F-bodies. I love them.

Keep up the ‘full videos’ of doing cars. I love the process and detailed description of the steps. I also like the small talk between those steps. Let’s see you wash a minivan.

@diydetailofficial

11 ай бұрын

Thanks! Will do! haha we should do a minivan

@dipsg2965

8 ай бұрын

You can use mine, it definitely has not been wash in over a year.

Great video!

@diydetailofficial

Жыл бұрын

Thank you!!

I did my first ceramic coating kast weekend using various diydetail products and i absolutely love them. If you're not sure about buying it i haghly recommend diydetail. Since I'm in Mexico i would love to see you guys ship internationally

@diydetailofficial

Жыл бұрын

awesome! so great to hear

I’m in the UK so I don’t have an iconic American car in mind (although the original mustangs are pretty cool). However in terms of iconic British Cars for me it will always be the classic Mini. I had one as my first car (sadly rolled it within 6 months 😭) and 20 years later I’m determined to get another one when I have the spare money and a garage to store it. When I do that thing is gonna be detailed within an inch of its life 😂. For now my car is a 2006 Yaris with 116,000 miles on the clock but it’s proving a very good learning car for trying detail things on without worrying too much about any potential damage I might do. When DIY Detail products hit the UK I’ll be trying out polishing for the first time on it as watching the Gold Standard system makes me feel comfortable doing so.

@diydetailofficial

Жыл бұрын

Nice! Yeah it’s always good to detail your own ride first and it’s nice when you don’t have to be nervous about damaging it too much

@stephensapp7233

Жыл бұрын

I would love to have a right hand drive classic mini.

Uggg I got one of those dusters. Used it lots when I digest got my brand new Jeep. It worked great to keep it clean after a rain storm. But now I know a lot better. Better to do a quick rinseless wash then a dusting. I’m going to toss mine. I’ll also be polishing with gold standard to fix my past mistakes.

@diydetailofficial

9 ай бұрын

Thank you!

Pro Tip - wash with the sponge or decontamination towel the lower parts (ie rocker panels, wheel well openings, etc) AFTER you have washed the hood and sides of the car. This way you have less chance of carrying the dirtier area’s debris to the upper parts of the car.

@diydetailofficial

4 ай бұрын

Good

Regards from México!,,,

@diydetailofficial

Жыл бұрын

Thanks for watching!

Hey I didn't know you were in Omaha! 402 represent! I'm from Nebraska but living in Iowa currently. Hope to see you in person at some point!

@diydetailofficial

29 күн бұрын

Thank you.

Great videos guys. Question: Can one use a clay lubricant instead of the iron remover for the PSD towel?

@diydetailofficial

Жыл бұрын

Yes DIY Detail Ceramic Gloss works great for that.

I usually use APC full strength when prepping for a coating

@diydetailofficial

Жыл бұрын

That’s an option for sure, lol but we would never endorse All Clean full strength…it’s powerful enough at 15:1

Hi again, this video was extremely helpful! Do you recommend using the water spot remover and eventually panel prep on the wheels before ceramic coating them as well?

@diydetailofficial

3 күн бұрын

Yes, absolutely

This was a very informative video, thank you! One question, if you don't have a way to touch less dry the vehicle would you re-wet the surface with rinseless and then dry with a towel or will that interfere with the ceramic coating?

@diydetailofficial

Жыл бұрын

yeah you can use Rinseless Wash or Panel Prep at that stage. Might want to be patient and give the car time to drip before ceramic coating application, however

Nice!

@diydetailofficial

Жыл бұрын

😀

Every time I see Nick bending down to hit a wheel, I can feel it in my knees. There was a time when I could do that, too. One gets older and it's not necessarily a pretty picture. If you don't mind my saying, perhaps introduce the use of a rolling stool to your audience. Saves knees and backs, and makes life easier all around.

@diydetailofficial

8 ай бұрын

We will soon, being of a certain age myself, I’m in the process of developing one that promotes proper posture.

Great stuff guys. I applied a coating to my daily driver and did pretty much the same process. Wash, clay with iron remover, acid based soap foam Carpro Descale) and wipe in. Then panel prep and good to go. Also I love my Ryobi 760 cfm leaf blower for drying 😁

@diydetailofficial

10 ай бұрын

Nice! Thanks for sharing

Can you use the RinseLess wash in the windshield washer system if so what dilution ratio do you recommend?

@diydetailofficial

Жыл бұрын

yes, as long as you don't go below freezing. Summertime is the perfect time:) Standard dilution 256:1

Did a 2023 Bronco recently, but seem to have some sort of protection on it after prepping, before polishing. In this case, would you still polish??

@diydetailofficial

Жыл бұрын

Yes

A very educational channel, great job👏👏👏 May i ask what type of foam are you using on the IK? wet, dry or intermediat? Thank you 🤗

@diydetailofficial

9 ай бұрын

Thanks! I believe we have the gray foam tip in there that comes with it

@japen_detailing

9 ай бұрын

@@diydetailofficial Many thanks for your response 🙌

@diydetailofficial

9 ай бұрын

Thank you!

I ceramic coated a brand new toyota without polishing. Car landed at dealer, I told them not to wash it, I picked up car and brought it straight home. Washed, decontaminated(had lots of metal dispite bring brand new), IPA spray, then cermaic coated. Yes there were some paint problems from the factory, not a big deal for me. Its a toyota, wasnt worth spending hours polishing. I just wanted to coat the car right away.

@diydetailofficial

2 ай бұрын

Good plan

Would you guys ever consider putting product in store somewhere? I would love to be able to run out an pick up some DIY detail stuff if I was running low.

@diydetailofficial

Жыл бұрын

we are open to that possibility, yes:)

@Xl4din

Жыл бұрын

@@diydetailofficial Got a possible timeline for that? 👀

@skatena125

11 ай бұрын

Would be awesome to see your product in the local walmart

New to your channel and love all the DYI videos. Can you tell me about your products as far as environmental safety. My home is on our own private well and no sanitary sewer. My concern is the chemicals leaching down into my well. Can't find anything on your website. My first order should be here soon cant wait!

@diydetailofficial

8 ай бұрын

With the minimal amount of product used, not a concern. When you have a DIY Detail product in hand you can scan the qr code to see all the SDS information.

@Scott-wy2yv

8 ай бұрын

@@diydetailofficial Thank you for the fast reply, just ordered more of your products. Cant wait!

@diydetailofficial

8 ай бұрын

@Scott-wy2yv thank you

Once you polish a car and apply one of your ceramic coatings, is there any reason to polish again before the end of the ceramic coatings intended life (3, 5, or 8 yrs) if it is well maintained with weekly hand washes, water spot remover and iron remover as needed and perhaps topped off with ceramic gloss every couple months? Will polishing with the gold standard diminish some of the ceramic coating? Thanks!

@diydetailofficial

Жыл бұрын

You might decide to do a light polish if you get some stubborn water spots or swirls and scratches. If you do a super light polish, you can just finish with Ceramic Gloss. If you feel like you've really been grinding in there, it might be a good idea to re-coat.

@renuing

Жыл бұрын

@@diydetailofficial sounds great, I'd prefer not to polish again, to me that would negate the benefit of such a great long term coating 🙂 just wanted to make sure it wasn't needed to maintain the properties of the coating through the years. 👍

I have a 2003 C5 Speedway White Corvette. It has a marring type issue on the lower back driver side corner, it looks it may have been created by the factory GM non-lined cover. Recommended steps and product to correct the paint?

@diydetailofficial

Ай бұрын

A light polishing with The Gold Standard Polishing System

@TheCravedawg

Ай бұрын

@@diydetailofficial ok, thank you.

1969 Camaro Z28 is my altime favorite

@diydetailofficial

Жыл бұрын

good choice!

The link for the video about the tunnel washes didn't appear

@diydetailofficial

Жыл бұрын

here you go: kzread.info/dash/bejne/q4eB1cV9ndG9YtY.html

Hello We need your advice to get our shop to the next level.

@diydetailofficial

10 ай бұрын

Please reach out to Yvan on social media or email him yvan@diydetail.com

If I don’t have foamer, will it still be effective to spray on the All Clean, let it dwell, then spray on rinse less, then agitate with the legacy sponge while contact washing?

@diydetailofficial

Жыл бұрын

Yep

@diydetailofficial

Жыл бұрын

Spray on All Clean, let dwell, then rinse, then spray on Rinseless let dwell rinse then spray on Rinseless again and contact wash:) a lot of steps but this helps ensure it all gets super clean

Would it still be beneficial to do these extra steps if we plan on polishing?

@diydetailofficial

6 ай бұрын

Yes, decontamination is still important

What if said cleaning tool that was found in the trunk was used very carefully? Or 100% get rid of it?

@diydetailofficial

4 ай бұрын

Donate it to a museum

Do you guys sell your products in europe too?

@diydetailofficial

11 ай бұрын

We are available in the UK 😀

Hey! Why didn't you just dry with a microfiber towel? Asking as I don't have a leaf blower 😅

@diydetailofficial

9 ай бұрын

Just showing different options.

Hey guys... was the car dried before the water spot remover was sprayed on ?

@diydetailofficial

9 ай бұрын

no, just clean wet paint

Ready, lets roll

@diydetailofficial

Жыл бұрын

sweet! see you tomorrow

@mariosantiago8931

Жыл бұрын

​​@@diydetailofficialSerio? 😢😢😢

Would your prosses as shown remove a spray on ceramic coating?

@diydetailofficial

Жыл бұрын

Not guaranteed, no

If I've been using Ceramic Gloss on my vehicle, would All Clean be able to remove that too? Or would Ceramic Gloss _require_ machine polishing?

@diydetailofficial

9 ай бұрын

If it’s fresh, it will need to be polished. After 3-4 months DIY Detail All Clean should remove it.

@jsclayton

9 ай бұрын

@@diydetailofficial Thanks! On a fresher application do think the red jeweling pad could do it, or need to go to the yellow waffle?

@diydetailofficial

9 ай бұрын

@jsclayton the red pad will be fine.

I like the Dodge RAM and I have now my one Gen4 in Germany! Bye the way I'm a car detailer as well!

@diydetailofficial

10 ай бұрын

nice! where in Germany?

@markussteiner-dr2gd

10 ай бұрын

@@diydetailofficial I'm between Colone and Frankfurt!

What coating is on that car? It is extremely shiny without being polished?

@diydetailofficial

Жыл бұрын

DIY Detail 5 year.

Is there a time limit on rinseless wash in a pump sprayer?

@diydetailofficial

Жыл бұрын

No it will be good for months

@raymondmurphy7314

Жыл бұрын

@@diydetailofficialIt won’t last that long😂. By the way I dry with an Ego leaf blower with a stubby. If a rinseless a towel with ceramic gloss.

@diydetailofficial

Жыл бұрын

Excellent

10:02 "wife gets in a way" 😉😭

@diydetailofficial

11 ай бұрын

Lol

❤

@diydetailofficial

Жыл бұрын

Thanks for watching!

Chevy Nomads are the bees knees.

@diydetailofficial

Жыл бұрын

Yes they are! Good call

Can you apply any of the ceramic coatings to RVs? I’m guessing the process is the same?

@diydetailofficial

Жыл бұрын

Yes

I use a leaf blower? I take it with me when I go to self car wash too. Thanks to rechargeable batteries!

@diydetailofficial

11 ай бұрын

Yes.

Even if the car was brand spanking new there would still be swirls and blemishes from factory. Never seen a car without them new. I’d still polish at all times before a coating

@diydetailofficial

Жыл бұрын

as Yvan said, the owner actually didn't want the vehicle polished

@orthodox1717

Жыл бұрын

As long as the paint is decontaminated, it doesn’t matter if there’s some swirls.

20:07 ups, "accidental discharge"... 😉

@diydetailofficial

11 ай бұрын

?

I dry mine with TW wax-it-wet some thick microfibers and vaccuum that also blows :D

@diydetailofficial

Жыл бұрын

Nice!

@nunomuacho446

Жыл бұрын

@@diydetailofficial Would use DIY products, but... No Europe yet, :P

@nunomuacho446

Жыл бұрын

@@diydetailofficial Going to do my 1st full interior detail on a client today, any advices?

There are so many iconic Chevrolets, and it's hard to pick one. But if I had to pick one, it would be a 69 ZL1 Camaro.

@diydetailofficial

Жыл бұрын

good call!

Water spot remover in gallons please!

@diydetailofficial

Жыл бұрын

Soon

74 stingray. While the new ones are nice, they don't have the soul and sex appeal of the old split windows.

@diydetailofficial

Жыл бұрын

True

70s for me

@diydetailofficial

9 ай бұрын

nice

C5

@diydetailofficial

6 ай бұрын

Nice choice

That's Still way to much work. Can you just cut all those steps in Half? Surly washing and degreasing should be good enough?

@diydetailofficial

9 ай бұрын

Not if you want the best results.

What a shame.

@diydetailofficial

10 ай бұрын

how so?

☕☕☕🇵🇷💚🇺🇸 Se termina la harina! Y no comienzan, Bendito Dios, hoy tengo escuela bíblica! Cristo viene ya!

@mariosantiago8931

Жыл бұрын

@@1stfrompuertorico568 Espero...😅😅