Thanks a lot mate! I was wondering if I could do this for days. You confirmed it, and it worked! Thanks a lot!

Dude you saved me here. Thank you. Video was short descriptive and understandable. Please make more

Thank you man. Finnally got my dritbike running for the first time

Just used your video worked great! Stole the kill switch by the start button and spliced it between the yellow and black on the cdi box so I could turn it off. Have to use a screwdriver inbetween the starter positive and negative screws but hey I'm back on the Rd! Thanks man! I learned more in 2 mins then I did in watching hr long wiring videos!

Thank you bro got my cart going cuz of this video

Love it thank you so much great video

Thanks alot buddy this help me out alot I've been stressing over this for weeks but what would cause it not to work with the setup its got

Thanks buddy Best helpful video

Best video on the net . Straight 2 the point

This is a very good video. It is straight forward and right to the point. I just paused the video a time or two rewound as necessary and within 10 minutes I/we had it RUNNING.

Awesome video, after 3 hours of stress and time to kick the friggin thing over it started easily after wiring it up the way you described in the video, kudos to ya dude and a big thank you from me 🏍️👍😊

@deactivated2141

Жыл бұрын

Big man, my wiring harness has 5 wires and they're diff colours compared to the video. The green wire from the stator and from the wiring harness are both female inlets. Then there a white wire on the harness and a yellow from the stator, everything else matches except for these, any help?

Can't wait to try man I have 11 children and that would be awesome to know thank you sir I hope this works PS you have a lot of good follower comments on here keep up the good work

They make the wiring so complicated... it’s easier to re wire my truck than to do a 110

@robertotorres7600

3 жыл бұрын

Really?….. then you obviously can’t wire a truck let alone a tail light harness alone.

@meganmcglothlin7786

Ай бұрын

The only wire that I have power coming out of my stator is my red and black I do not have power coming out of my blue and white

works like a charm bro, thanks alot bro

Really helpful bro keep doing what you do

Oh thank you. Got my atv running better spark then before. Simple as that Thanks man.

@Ayeeits_logan

Жыл бұрын

Where do you splice the plug wires in

Great video by the way. Help me out big time thank you

I did what you said after trying all these other KZread crap and bang I got spark and it is now running thank you

Nice video. Simple and stress free. But my question is. Where do I connect my battery too? You get me? Or do you have another video that shows your kill switch ?

Gonna give this a shot i have a cdi 124cc in my 2015 pbr and had to much unnecessary wires so I'm stripping it and gonna use this in the am maybe get my 900 dollar project that's just been sitting another go in the morning thank you

Hey mate, does the handle bar controls still work? Does this bypass having to hold in the brake and the deadman switch on the rear?

Can u still wire the starter up to an after market starter switch. What's the final start up process once installed on ATV,,bike,,, go kart???

Thanks for your help 👍🏾 🙂

You did good man

Sorry so long getting back to ya. And yeah there right, that's the same thing I did, I had to hook up a kill switch. And this way bypasses everything!! No dead man switch, no holding the Break to start.

@sallycrist5733

3 жыл бұрын

how do you hook up the kill switch just wondering?

@Jeremy-fk6zh

3 жыл бұрын

@@sallycrist5733 Connect your Killswitch to the frame and the other side to the coil, which should be green wire

@Blindbat00721

3 жыл бұрын

When u say put the green to the motor wear at on the motor

@PITVIPER69

3 жыл бұрын

@@Blindbat00721 ground wire to the motor. Ring terminal around a random bare metal bolt on the motor. "Chasis ground"

Got my atv up and running thanks to your video great video and it made the wiring very simple and easy to do thanks for a great video and awesome advice

Does this work for all brands I have an unknown quad with tons of safety switches

Damn right good looking out 🔥🔥🔥🦾

I have a little yamoto 150cc. I can't figure the wiring out. I just want it to run. If I just straight wired it like u did how can I put a on and off switch on it

that helps alot i have one of those junky bikes and it gets spark for about 15 mins then it wont spark at all till the next day

@Jeremy-fk6zh

5 жыл бұрын

Iv had the same problem. My old one ran for about 30 minutes an shut off. I change the cdi box, an it still runs to this day. That was two years ago.

@michaelororke379

5 жыл бұрын

Jason Conner I’m having this same issue right now !!!

@willn8590

5 жыл бұрын

Aaron Bishop try changing the cdi it worked for me on my old bike

@virgilstewart4407

5 жыл бұрын

Can you send me a email picture of the way you hotwired the motor to start & run ? My wire's coming out of my motor are, .yellow. .blue. .green. .red & black. .black & yellow. Can you please. tell me how to wire up from the motor to the coil to start & have it stay running & rideable I think the motor is a 80.cc or a 90.cc Honda pullstart it's a 4. Speed all the gear's are up & all the way down is nuwtrolle I really do appreciate it too & Thank you very much...???!!!. This is my email address 😊 ok thanks. VirgilStewart42@gmail.com. 🤙🤟🤘👌✌️🤝🤞😉🙂😁.

Finally exactly what I wanted thanks

I have a ssr125 dirt bike so what wires are the ones I need and don't need

well done i am stuck in veitnam and the bike started fucking up gonna give this a go

Any idea which is for power to charge I'm going this method but want to be able to charge a battery to jump start.

Did you press that auto start button? If i eliminate the rest of the harness, where what starts the engine? Im not getting spark and for some reason, when the kill switch is flipped to the 🚫 position, it stills turns over but no spark or start! ANY clues?

Say buddy I have an extra red wire. Can combine that one and the black and red one. I just put a new stator but the there’s the two extra wires that you say I don’t need, ok so is that ok?

What do the 2 wires you said aren't need do ??

i’m lost here. the green wire from the engine goes to what wire on the ignition switch?

Dudes a hero

Thanks for sharing. What kind of driver are u using in the drill to turn the engine over? Got a 90 GKG-2 go cart w/ Lost the key, mercy. Thanks again, - take care man.

@Jeremy-fk6zh

3 жыл бұрын

Just a cheap drill from Walmart, with a 14 mm socket

@leeisenberg

3 жыл бұрын

@@Jeremy-fk6zh Thanks man, working on a go kart w/ same engine for a guy. Been sitting way too long almost completely out in the weather, mercy.

Thank you

Will this work on a atc 110 cdi engine ?

THNX FOR THE QUICK SELFLESS FUKN BADASS VIDEO

Can you make a video on this again? And show me what if you used from the wiring harness or what I would need to purchase to make this work without the harness? Please

Hey buddy how can I make sure the stator is good?

You better than the other kit the other kid didn't know what he was saying

I hooked it up just like you did I only get power coming out of my little black box the white and black the yellow and black wire coming out of my CDI box is not

Will I be able to still drive an bush bash my quad with the bypass

@elisalazar3097

4 жыл бұрын

Prudence Broughton if you can drive a fat girl you can drive a quad !!!!

Thanks a lot

Hells yeah brother

My motor has a set of wires coming off the magneto and then there's another set of wires coming from the same spot one set plugs in cdi box.what do i do with other 6 wires

We had a bike running with the hall sensor broken off. I thought that was for the ignition time ?

Can you please send me a video of where the wires are running to off of that for the starting button

My question is can I remove all my light wires from it to make it not as messy

Im just swapping my sons 50cc for a 125cc buggy The new engine has 2 yellow wires, the harness on buggy has white and yellow. Which do I pair? Thanks for the help

@Jeremy-fk6zh

3 жыл бұрын

If Im not mistaken them two wires are supposed to be for your lights, If you did not hook those up it wouldn’t keep the motor from running, but honestly you really can’t mess anything up, if you hook up wires wrong it’s not going to fry anything trust me I am pretty much dirt poor and I have no computers or anything to test wires like that, so I have actually hooked up wires all different kinds of ways to try to get a spark, And then when I got that first part I put my spark plug on and it fired right up, I drove that little four wheeler for miles on dirt trails it did so good throughout all that and still does good, so I’d say hook yellow to yellow and yellow to white if it doesn’t work that way switch them around

@Embraceme40

2 жыл бұрын

I need help !!! I think i got it but yea.. Can u

I’m lost my stator is a 2 pole ?4 wires qmb139 50 cc

I watched this and went backwards on my build 😂🤣😂🤣 now explain to the people the don’t have the connector ends to easy wire it like you did.

Thank you!!!

I’m trying this tomorrow

Cool, I'll just give my 10 year old a drill to start his bike lol

@Tota1Everything

3 жыл бұрын

All you have to do is take a 12 volt battery and connect it to the 12 volt DC motor/starter.

@Jeremy-fk6zh

3 жыл бұрын

Cool make sure there is an adult to watch u an ur kid, LMAO 😂

@chrisandaprilcastille6019

11 ай бұрын

And why not. 10 year Olds in other country's know how to disassemble firearms and put back together.

What about the kill switch? Where would I kill the motor?

Bro somebody cut all the wires to everything on this scooter I got so it's a bunch of splice wires all over it n none of them are connected can u make a video of trouble shooting the speedometer and signals if u could please u made it simple for motor hoping u could do the same on everything else

But does the kill switch still work

Please and do i have to have the spark regulator thing?

@Jeremy-fk6zh

4 жыл бұрын

Yes you do need the coil that your spark plug hooked up to and the CDI box that's all you need and your Killswitch of course I'll make a video One day about that

Bro I got fire and gas and not starting .. is that the timing?

Can you do this on a yerf dog rover?

WILL THIS WORK ON 1975 HONDA CT70 TRAIL? I WANT TO ELIMINATE BATTERY AND LIGHTS. THANKS.

@Jeremy-fk6zh

3 жыл бұрын

Sorry so late getting back to you and I don’t think so the wiring diagrams I believe are different, I only work on Chinese ATVs, I’m sorry

Has this fella replied to anyones questions,,,

I GOT a 4 wheeler for my daughter and the key switch was completely gone so I was left with 4 wires if I touch 2 a red and black then they pop the fuse. But the other 2 don't do nothing and I have no neutral light so which 1 is my ignition.

How do you control your lights? Head and tail?

@Jeremy-fk6zh

3 жыл бұрын

Sorry so late getting back to you and this bypass means there are no lights or toggle switches the only way you can kill the engine is unplug your spark plug wire

So what did u do with the black n white wire coming out the cdi?

@jaredpriestleymusic5368

3 жыл бұрын

I think thats the "kill" wire

i would just like to know where is that coil you are talking about

@James-it5dc

3 жыл бұрын

On the wire that runs to your spark plug

Do I have to use the coil that came with it cause I lost mine

@Jeremy-fk6zh

3 жыл бұрын

Yes that’s one of the main parts you need

How can you bypass the cdi because my Honda has cdi problems and no cdi will work on it

@Jeremy-fk6zh

5 жыл бұрын

I dont think u can bypass it. the cdi is the brain, for your motor. with out it, it wouldn't know how to spark right or even at all. I've always had bad plug, bad coil, bad stator, bad ground,

can you still use handlebar controls?

@Jeremy-fk6zh

4 жыл бұрын

No sir you'll have to wire in your own kill switch and starter switch

Where do I connect the plug wires

hey brother you stated that coming out of the motor there is a)yellow b)white which those two arent needed and then C) is the green (ground) d) black and red (stator) and the e) black and white (pulsar). Mine doesnt have the black and white, mine has a blue and white. So would that be the pulsar? in your video the one you mmention looks blue and white.

@Jeremy-fk6zh

3 жыл бұрын

Yes blue an white is ur pulsar I’m sorry

Where is the plug wire connected in this?

What about the starter?

What about ignition?

So how are you turning it off are you choking it or something

@Jeremy-fk6zh

4 жыл бұрын

Hook a kill switch to your main ground

Doing this right now

Thanks super fucking helpful

Hey does this work with a 250cc Chinese Motor

@Jeremy-fk6zh

3 жыл бұрын

It’s pretty much the same yes sir,,

Oh yeah, I hot ride everywhere I go. The only problem I have is my cdi box would come unplugged.

@Tota1Everything

3 жыл бұрын

Tape it with electrical tape lol

ALSO, ARE YOU HOOKED UP TO A BATTERY FOR THIS? THANKS AGAIN.

@Jeremy-fk6zh

3 жыл бұрын

Na I’m use a drill with a 14 mm socket

@Jeremy-fk6zh

3 жыл бұрын

Na I used a drill, but I will make another video, because I see some people have problems hooking up ther battier, I just jump the starter,

How would i connect that to an ignition to make it turnover

@Jeremy-fk6zh

5 жыл бұрын

Well I use a atv batterie, hooked directly to the starter with my push button. An a 12 v solor pannle to recharge the batterie while I'm riding.

@ongojay9965

5 жыл бұрын

@@Jeremy-fk6zh how is the wiring ran exactly though from when you by passed it too the battery to switch

@Jeremy-fk6zh

5 жыл бұрын

Batterie/positive to starter with switch.. batterie/ negative going to ground on fraim. Should start this way. Then I hooked solor pannle directly to batterie.

@justinc9911

4 жыл бұрын

@@Jeremy-fk6zh hi i get spark then it cuts for 1 minute of turning then it comes back is this a dirty stator or a short

@Jeremy-fk6zh

4 жыл бұрын

@@justinc9911 sorry for getting back so late it would more than likely be your coil try your spark plug first if it's not the coil check your grounds if it's not your grounds it could be your stator your pulser normally doesn't go bad but I'm not saying that it can't go bad but that would be the last thing i check,

Can I do that to my warrior. 350 if so someone know lmk pleasw

Will that work on all quads

@mrbombastic12th45

2 жыл бұрын

Yes

Man can you rite down what color wires go to what color wires on the Coil ,Cdi box , and stater ! Ease its hard to see in the video

@bg307

3 жыл бұрын

The colors coming out of stator are same as cdi

it doesnt get no simple as that bro facts

can it work on any bike

@Jeremy-fk6zh

3 жыл бұрын

Pretty much the same yes, but your wires will be a different color,

My sons is missing when you gas it I think it has something to do with the wiring

Could u give me the wiring info for a gs450 Suzuki engine I put on a go cart it turns over but can’t get a spark. I know it’s pretty much the same thing but I am a dummy from west Tennessee that cannot for the life of me figure that stuff out . Thanks for the video on the 110cc by the way good job explaining

@Jeremy-fk6zh

3 жыл бұрын

I’m sorry I have no clue on that type of quiet I am only a Chinese quad builder,

@laransly5129

3 жыл бұрын

@@Jeremy-fk6zh hey man i have the quad 4 wheeler and the lil pocket rocket also . I thought they were the 110 cc but last night i saw on top of both engines instead of 110cc it said 107cm whats that number? And i did get the lil pocket rocket started last night thru the solenoid . Thanks for the video on how to wire the stator

@Jeremy-fk6zh

3 жыл бұрын

Good job buddy I’m glad it helped, and the 107CM means it’s a 110cc I don’t know why they do that other than it being a China quad, you’ll see 47CM 49CM I believe an those are 50cc

Hey man this didn't work for me brand new every new wiring harness I bought a quad was running great Washed it with the hose and it died no spark sine even new wiring harness and stator everything nothing is getting spark

@Jeremy-fk6zh

Жыл бұрын

add me on facebook if u want. ill try my best to help you. Jeremy diy

@ALMIGHTYGARAGE

Жыл бұрын

@@Jeremy-fk6zh hey man what's ur name on fb I'll add you never kno when I'll need help but I put a new stator on it but it was faulty I put another new stator in I had and did this and it worked fired right up thanks so much man knowledge helps now I know a trick forever thanks so much I'm always messing with these quads buy and resell them

@Jeremy-fk6zh

Жыл бұрын

Diy jeremy

It's an engine son,and engine!! Lol,great video,been wondering how to do away with all that crap on my daughters atvs,now I know,plus adding a kill buttons easy peasey.. .

I wish I were to watch this video first if other people just need to delete their videos it's the only one you need thanks brother I was about to put a rag in the gas tank

Are them tatters or stateers but good job

@Jeremy-fk6zh

3 жыл бұрын

Stater, 🤣

Is there diagram

@Jeremy-fk6zh

4 жыл бұрын

Not that I have and not that I have found

so you dont need the rectifier