Ääähhhh yes this is how we build our own PE kayak. Start and build your own kayak out of trash. There is no magic this videomaterial is from 2018/2019
Жүктеу.....
Пікірлер: 40
@williamlowry409929 күн бұрын
This is the coolest thing I've seen
@tylertucker26082 жыл бұрын
This is a very interesting project! Please show us more on the roto moulding process. Nice work, it turned out great!
@KayakBrothers
Жыл бұрын
i try to make some videos next time
@jackbloznowski54294 ай бұрын
Impressive
@shanebenedict3204 Жыл бұрын
Super cool guys! Nice work!
@KayakBrothers
Жыл бұрын
Thanks ! We have already the next prototype on the water . this one go in the same direction like your RMX.... but we didnt steal your idea... ;)
@shanebenedict3204
Жыл бұрын
@@KayakBrothers The mobile roto molding machine is amazing!
@Senders Жыл бұрын
This is so epic!
@circleboofteam27122 жыл бұрын
Geiler scheiß 👌🏽 wir müssen das Ding mal Probefahren
@PyranhaKayaks Жыл бұрын
👀
@williamlowry4099
29 күн бұрын
Hardest I've laughed at a comment in a long time
@timheide85702 жыл бұрын
Wenn sich das Kajak so gut fahren lässt, wie man aussieht... Echt der Hammer 🤙
@KayakBrothers
2 жыл бұрын
Wir sehen schon ziemlich gut aus, stimmt. Aber das Boot lässt noch ein mikrobisschen besser fahren.
@timheide8570
2 жыл бұрын
@@KayakBrothers Es... Muss es natürlich heißen 🤣
@kenclarke4559
2 жыл бұрын
@@KayakBrothers This is awesome, I love the hardwork you showed. How many times can you use the mold versus a steel mold, did you need a special resin to withstand the heat, not ignite. awesome job 👏
@paulward248 Жыл бұрын
just goes to show how the big companys are ripping us off excellent work nice looking boat
@sadder9531
Жыл бұрын
there is always a huge work in the background ... video is just nice to see but when you get your hands dirty and find out that your first try should be thrown away and to repeat to avoid mistakes you did before ... which we name experience ....
@hajostark50072 жыл бұрын
Mega
@user-ud2pl3vk3z11 ай бұрын
Nice video How do you run a fire on fiberglass
@adrien-pianoviolon5353 Жыл бұрын
Awesome, what kind of filler did you use to shape your design ?
@777PLove Жыл бұрын
thank you for inspiration
@KayakBrothers
Жыл бұрын
Thanka. Watch our leatest video ;)
@777PLove
Жыл бұрын
@@KayakBrothersI have been checking out your channel good stuff that's coming from a video kayaker if your ever round the Gauley River look me up be good too meet youons
@guachingman Жыл бұрын
Do you fill the void inside with foam? Would it make a difference, float more? Amazing craftmanship btw.
@martini7454
Жыл бұрын
Air floats. Foam only traps air bubbles, and thus floats less than air given it's weight. So adding foam would only add weight. However, if a kayaker swims out of their kayak and the boat fills with water, having something to displace water helps keep the kayak floating. This brings us to float bags. Some kayakers will add 'float bags' which are just plastic/rubber bags of air that *displace* water if the kayaker swims out of the boat. You can google 'kayak float bag' for images. Cheers! :)
@icast.2388 Жыл бұрын
Ekselent job!!!!! Do you mind if you share FIBERGLASS name and RESIN name? THANKS
@KayakBrothers
Жыл бұрын
Nop
@RonnGarris Жыл бұрын
what kind of filler did you use to shape your design? Also, do you know what temperature your furnace was at when you molded it?
@RonnGarris
Жыл бұрын
@@KayakBrothers very interesting! I’m actually in the middle of designing and molding a kayak of my own. I have a ton of questions. Mainly, how difficult was it to remove the top mold from the cockpit rim? Did you have to cut the mold to free the boat?
@stephenburden8947
Жыл бұрын
Currently working with my brother on designing and building a rotomold and designing a new boat. Glad to see your video and know that other people are doing this too!
@simonsimon4052 жыл бұрын
how does the top part mold is removed with the negative angle around the skirt groove?
@KayakBrothers
2 жыл бұрын
We have 3 Parts of the mould, but you have to destroy the foam shape. For the PE kayaks you haven't any problem when it's warm enough.
@agamtea82
Жыл бұрын
@@KayakBrothers What type of resin do you use for the concrete you use, is it FRP? Thanks
@KayakBrothers
Жыл бұрын
@@agamtea82 Sorry but that's a little secret.. but you can use different types of resin.
@manimanason2094 Жыл бұрын
how much plastic did you use for one boat
@KayakBrothers
Жыл бұрын
15-17kg of plastic. how you like
@kayakcroatia2 жыл бұрын
Awesome. I want to make my own kayak but out of kevlar or carbon... neber occured to me that i could rotomold it. Hmmm can you really heat up the mould made from glass fibers and epoxi resin? What did you use for plastic ? Seems like a lot of work. Good job guys. And how many kayaks can you make out of that mould ?
@kayakcroatia
2 жыл бұрын
@@KayakBrothers thanks for response. I meant to ask where did you get plastic from ?
@rauhertz2755
2 жыл бұрын
@@KayakBrothers 200 degreds? and how long time spining in the oven?
@FrankensteinDIYkayak Жыл бұрын
yeh you can do it thatway but there are others as well and much less time consuming. with the huge number of cracked and wornout whitewater kayaks around you are better off getting a hot air plastic welder and going the frankenstein method.
Пікірлер: 40
This is the coolest thing I've seen
This is a very interesting project! Please show us more on the roto moulding process. Nice work, it turned out great!
@KayakBrothers
Жыл бұрын
i try to make some videos next time
Impressive
Super cool guys! Nice work!
@KayakBrothers
Жыл бұрын
Thanks ! We have already the next prototype on the water . this one go in the same direction like your RMX.... but we didnt steal your idea... ;)
@shanebenedict3204
Жыл бұрын
@@KayakBrothers The mobile roto molding machine is amazing!
This is so epic!
Geiler scheiß 👌🏽 wir müssen das Ding mal Probefahren
👀
@williamlowry4099
29 күн бұрын
Hardest I've laughed at a comment in a long time
Wenn sich das Kajak so gut fahren lässt, wie man aussieht... Echt der Hammer 🤙
@KayakBrothers
2 жыл бұрын
Wir sehen schon ziemlich gut aus, stimmt. Aber das Boot lässt noch ein mikrobisschen besser fahren.
@timheide8570
2 жыл бұрын
@@KayakBrothers Es... Muss es natürlich heißen 🤣
@kenclarke4559
2 жыл бұрын
@@KayakBrothers This is awesome, I love the hardwork you showed. How many times can you use the mold versus a steel mold, did you need a special resin to withstand the heat, not ignite. awesome job 👏
just goes to show how the big companys are ripping us off excellent work nice looking boat
@sadder9531
Жыл бұрын
there is always a huge work in the background ... video is just nice to see but when you get your hands dirty and find out that your first try should be thrown away and to repeat to avoid mistakes you did before ... which we name experience ....
Mega
Nice video How do you run a fire on fiberglass
Awesome, what kind of filler did you use to shape your design ?
thank you for inspiration
@KayakBrothers
Жыл бұрын
Thanka. Watch our leatest video ;)
@777PLove
Жыл бұрын
@@KayakBrothersI have been checking out your channel good stuff that's coming from a video kayaker if your ever round the Gauley River look me up be good too meet youons
Do you fill the void inside with foam? Would it make a difference, float more? Amazing craftmanship btw.
@martini7454
Жыл бұрын
Air floats. Foam only traps air bubbles, and thus floats less than air given it's weight. So adding foam would only add weight. However, if a kayaker swims out of their kayak and the boat fills with water, having something to displace water helps keep the kayak floating. This brings us to float bags. Some kayakers will add 'float bags' which are just plastic/rubber bags of air that *displace* water if the kayaker swims out of the boat. You can google 'kayak float bag' for images. Cheers! :)
Ekselent job!!!!! Do you mind if you share FIBERGLASS name and RESIN name? THANKS
@KayakBrothers
Жыл бұрын
Nop
what kind of filler did you use to shape your design? Also, do you know what temperature your furnace was at when you molded it?
@RonnGarris
Жыл бұрын
@@KayakBrothers very interesting! I’m actually in the middle of designing and molding a kayak of my own. I have a ton of questions. Mainly, how difficult was it to remove the top mold from the cockpit rim? Did you have to cut the mold to free the boat?
@stephenburden8947
Жыл бұрын
Currently working with my brother on designing and building a rotomold and designing a new boat. Glad to see your video and know that other people are doing this too!
how does the top part mold is removed with the negative angle around the skirt groove?
@KayakBrothers
2 жыл бұрын
We have 3 Parts of the mould, but you have to destroy the foam shape. For the PE kayaks you haven't any problem when it's warm enough.
@agamtea82
Жыл бұрын
@@KayakBrothers What type of resin do you use for the concrete you use, is it FRP? Thanks
@KayakBrothers
Жыл бұрын
@@agamtea82 Sorry but that's a little secret.. but you can use different types of resin.
how much plastic did you use for one boat
@KayakBrothers
Жыл бұрын
15-17kg of plastic. how you like
Awesome. I want to make my own kayak but out of kevlar or carbon... neber occured to me that i could rotomold it. Hmmm can you really heat up the mould made from glass fibers and epoxi resin? What did you use for plastic ? Seems like a lot of work. Good job guys. And how many kayaks can you make out of that mould ?
@kayakcroatia
2 жыл бұрын
@@KayakBrothers thanks for response. I meant to ask where did you get plastic from ?
@rauhertz2755
2 жыл бұрын
@@KayakBrothers 200 degreds? and how long time spining in the oven?
yeh you can do it thatway but there are others as well and much less time consuming. with the huge number of cracked and wornout whitewater kayaks around you are better off getting a hot air plastic welder and going the frankenstein method.