I just started to think about doing a DIY simulator last weekend for my game room, so this video was super helpful. I'm going to watch the other ones and check out the website.

Great information in this video. I love the way you created your own turf with putting holes.

Awesome Video!!! Thanks for your time & willing to help!!!

This was super helpful man, thank you!

Very good explanation of how to design your own golf sim to fit your space. Like the gym mat idea, may have to give that a try.

Great vid and great set up Thank you 👍

Very nice informations for golf simulation DIY,Thank you

Well done with the demonstration highlighting the setup and the steps you took along the way. Just subscribed. Excellent SIM setup and best in 2024 ! Brandon

@PixelGolf

4 ай бұрын

Thank you Brandon, I really appreciate that!

Very nice! My son has been dropping hints we should be doing this and this makes it seen really diy doable. Great vid

@PixelGolf

3 ай бұрын

Glad to hear! Feel free to reach out if you have any questions. Our contact info is on our website!

Awesome video! I’m just beginning my journey into an indoor golf sim and this is so valuable! Quick question tho: if the floor isn’t level, do you just pad the connectors on the bottoms to raise one side? Or do you just level the screen by adjusting the bungee mounts? Thanks again

Great video! This was in my algorithm, I’m subscribed now! How much, all in, did your set up cost? I get that you can adjust options for a budget. Just curious.

Great information and some great links, i noticed you have a rolex clock on the wall, is this some thing you can purchase or did you make it ?

Great vids! With the c series do you have the turf in front of the bottom edge of the screen or does the bottom of the screen sit on top of your turf? And what size pipe insulation pieces did you use?

Most impressive part is that you convinced your wife to convert a room in the house to this. You got a keeper there buddy!

@PixelGolf

2 ай бұрын

Sometimes it’s better to ask for forgiveness rather than permission😂

Thank You for putting together a great video.. I have been thinking about building one but just haven't been courageous :).. I may start one now. Thanks again.

@PixelGolf

4 ай бұрын

No problem, glad it helped! Feel free to reach out to us if you need help along the way.

@alhaqqIndy

4 ай бұрын

@@PixelGolf thanks man.

@alhaqqIndy

4 ай бұрын

How did you get the EMT pipes measurements from Carl's? And do the bungies come with the screen order or did you have to purchase separately? Thanks.@@PixelGolf

@PixelGolf

4 ай бұрын

@alhaqqIndy Thye include it with the shipment, but can also provide them ahead of time so you can get them cut and ready for when the kit arrives. When you buy enclosures from them, they include everything you need for install, minus the emt if you’re going to source it yourself. So this will include all bungees and zipties needed.

What’s the thickness of the putting turf you installed from syntheticputting?

Great points - the markups for the "all in one" you are not saving any $ you are actually paying more for less

Need help with selecting a turf which I can use for putting and doesn’t cost a lot.

GREAT INFO! CAN THE SIMULATOR SUPPLIES DELIVERED TO CANADA TOO? ON THESE VIDEO HOW MUCH WAS YOUR TOTAL EXPENSE? TNX! JAY

Excellent walkthrough. Love the look of the black pipe laptop shelf, where did you get that or did you make it? Great job

@PixelGolf

5 ай бұрын

Thank you! Here’s a link to the pipe kit I got, amzn.to/48xsveY for the wood shelves, I just went to Home Depot and picked up some wood slabs that I liked the look of.

Great video and so helpful as I start to build mine! Weird question, where’d you get the Rolex clock wall display??

@PixelGolf

4 ай бұрын

Glad it helped! If you plan to use any of the products in the video, please feel free to use the links in the description, it definitely helps the channel out! Not a weird question at all, I get asked that a lot😂 I built the clock myself. I’ve seen it over the years at the tour events and being a big watch guy I’ve always wanted one.

Great video and thanks for sharing. What did you use for the greens around the hitting mat?

@PixelGolf

2 ай бұрын

The rough strip? Thats just rough from Lowe’s/Home depot. It’s like 1’x15’ for roughly(pun intended) $20.

Does the projector connect to pc and pc to simulator through Bluetooth?

Great video, very helpful. I have to ask, where did you get the wall rolex clock?

@JackiBoomer2

2 ай бұрын

Thats what I want!!

@et890

2 ай бұрын

On another comment he said he made it

This is a great video. Thank You. I am pulling the trigger to get the screen and enclosure. How/where do I get the pipe dimensions and quantities to prepare?

@PixelGolf

3 ай бұрын

Thank you for that! Carls will email you after ordering the breakdown with the pipe dimensions so you can get them ahead of time. If you’re purchasing an enclosure, please use our links in the description. We get a small commission and the cost is the same to you! We’re also available if you need any other help.

@pjcheng9164

2 ай бұрын

Ordered the DIY enclosure from Carl's Place less tubings through your link. However, I only got an order confirmation. They did not provide the tubing dimensions needed to build the enclosure. My screen size is 90x120". The overall size of the enclosure is 101.7" in height, 131.4" in width, and 36" in depth. I also got the back cover. Can you assist to determine the tube length and quantity needed for my enclosure? Thank you

After watching a ton of content on this subject this vid was by far the best. I have equal lefty to righty golfers in the family. What is the minimum width required to be able to insert the smaller hitting mat in the center?

@PixelGolf

4 ай бұрын

Thank you for that! For lefty and right handed players you would need at least 15’ wide for clearance. Check the channel for my latest video of the BenQ LK936ST projector, there is a chapter in there for the 3D Sim Planner tool that lets you input your dimensions and player height and gives you a 3D representation for clearance in your space.

Terrific video! I’m finally pulling the trigger on a full sim setup. I’ve been using the Mevo+ with a spornia net. Ordered my DIY Carl’s Place enclosure. Not basically going. To be copying a lot of your setup. Couple of questions for you: 1) hitting strip - I’m currently using the CCE mat and it’s causing tendinitis. I’ve already got the gym mats you used and am sourcing turf. But wondering which hitting strip you’d recommend? Your diy divot strip or Carl’s place divot strip or Carl’s Hot Shot mat? Seems like you’re a fan of all of them. Wondering if you have a top pick? 2) Speakers - are you still happy with your JBL surround speakers? Looking at getting the same ones. 3) Laptop - I can get a deal on almost the identical spec laptop your recommend but MSI brand 3080ti 16gb graphics card and rest same. I know you said it works well with GSPro. Wondering what settings you have it on. I keep hearing that 3080ti laptop card is not enough for 4K on gspro. I haven’t used GSPro yet so not sure if it is even worth trying to run on 4K. Sorry for all the questions. I appreciate any guidance you can provide and thanks for the terrific videos! Much appreciated!

@PixelGolf

3 ай бұрын

Hello, sorry for the delay. We missed this question… Please reach out to us via our website or give us a call and we can address all of your questions and concerns.

Awesome video. Subscribed. Where did you find the Rolex wall clock? Pretty cool addition

@PixelGolf

4 ай бұрын

Thank you for the support! I actually built that wall clock. I’ve been seeing it for years watching the PGA events and being a big watch guy I decided to make one. Definitely my favorite addition to the sim room!

@kevinhanchukTV

4 ай бұрын

Damn, may have to steal that idea. Been looking for one

Great video. A couple of questions: A: What was the total build cost of all the items in your final set up? B: Has your handicap / game come down? Thanks again! Wayne

@PixelGolf

4 ай бұрын

Hi Wayne, With the new setup: Carls enclosure- $1500ish Turf with gym mat- $550ish Launch Pro Unlocked- $5500 BenQ LK936ST- comped, but retail is like $4800 Laptop- $1200 Really though, you could go with a $1k projector and Mevo plus to save a lot of coin! My handicap is down slightly from when I first bought my sim from 15 to currently 13, but shit shaping and wedge game is improved greatly. Most of my handicap is due to some ongoing back issues making driving and putting difficult…

Great video, very helpful I am currently building my set up and already have the GC3 I only have about 3.3 meters width Because the GC3 is camera based I don’t need to hit be hitting directly into the middle of the screen right?

@PixelGolf

4 ай бұрын

No, you can hit off center and most software has the ability to adjust the center point in the software for this reason. One thing to consider is, the more off center from the middle of the screen, the more bounce back is added. Think of jumping on a trampoline, the more in the middle, the more give the material has.

@Brightt24

4 ай бұрын

@@PixelGolf ahh great advice Thanks, appreciate the feedback

Do you strongly recommend 1-inch mats over 3/4 inch? Would 3/4 not be enough for the divot action hitting strip? Thank you! Great video!

@PixelGolf

4 ай бұрын

I would recommend 1” over 3/4” for the height to accommodate hitting inserts and the divot style strip. You can use a wood underlayment if you absolutely need to use 3/4” for whatever reason though.

Quick question on the Bushnell Launch Pro. How easy is it to switch from a right handed to a left handed player? Is there a lot of movement or additional setup required?

@PixelGolf

4 ай бұрын

I haven’t had to do that, but you can switch it in the setting and play the hole out in the software instead of alternating to make it easier.

Just wanted to post again since I’m trying to build out a sim similar to yours…With the c series do you have the turf in front of the bottom edge of the screen or does the bottom of the screen sit on top of your turf? And what size pipe insulation pieces did you use? Thanks!

@PixelGolf

3 ай бұрын

Hello, I have the turf sitting up to the turf, so the bottom of the screen is below the turf height. The Pipe Insulation I used was the standard 6’ pieces at Lowe’s/Home Depot for 1” pipe. They are a few buck a piece. If you need an immediate response for anything else, don’t hesitate to give us a call. Phone number is on our website.

Thank you for a good walkthrough. I want to build a home sim. My son is 6 foot 3 inches. What kind of clearance should I have in the room?

@PixelGolf

6 ай бұрын

It really depends on the swing. 10’ is ideal, but 9’ can work depending on the swing arc. I have 9.5’ roughly in my slope ceiling setup and had a 6’ 7” guy in here with no clearance issues.

Love the Rolex wall clock. Looked online but couldn’t find one. Do you have a link for it?

@et890

2 ай бұрын

On another comment he said he made it

Great video. Nicely explained. Do you get any movement of the turf on the rubber mat when you are swinging? Did you use adhesive to keep the turf from moving on the mat?

@PixelGolf

6 ай бұрын

Thank you! I get zero movement from the turf on the mat. It has a really rough texture that makes it grip well and with the hitting insert in place it ties the mat and turf together. The mat will move slightly after so much use, but we’re talking maybe a half inch…in which case it’s as easy as pulling it back in place.

@rlbjr

6 ай бұрын

@@PixelGolf Great. Also, is there a reason you didn't mount the projector on the bar mount that they have that can attach to the frame? I will be moving my enclosure against the wall when not in use and was trying to decide between the bar vs ceiling mount. With the bar mount attached to the enclosure it would guarantee the same distance/alignment to the screen each time I move it. With a ceiling mount I would have to make sure the enclosure is in the exact spot every time.

@PixelGolf

6 ай бұрын

Since my enclosure is only 33” deep, I’d have to have a really long extension. I move mine out quite a bit for filming and repositioning isn’t difficult at all, just adjust until the image is correct. I would imagine it would be more difficult to adjust the extension holding the projector as I imagine it would move a bit when moving the assembly.

@rlbjr

6 ай бұрын

@@PixelGolf Makes sense. I didn't think about the bar moving as mine would only be about 36" deep. It would probably have to extend out another 2 ft depending on the projector used. Sorry, last question. I'm also debating between the Premium and Preferred screen from Carls. I will only be using 1080 and my enclosure will be about 10'W x 8'H. Is the image at that resolution and size really noticeably better on the Premium screen? Thanks.

@PixelGolf

6 ай бұрын

@rlbjr I personally don’t have any experience with the preferred. Based on the thumbnail nail it seems like a thicker woven pattern and more textured, so I would imagine it would affect the image. I will say the premium screen is extremely nice and it’s quiet as well! Whatever you pick, make sure to use good clean balls and clean clubs… it will look nice for a lot longer!

Do you know where to buy canopy separately? I am building 8X10 enclosure. Thanks.

@PixelGolf

3 ай бұрын

I’d reach out to carls, they may sell it separately.

How do you connect the turf to the foam mats? Do you glue them? I watched your video on the hitting insert and I plan to do the same thing!

@PixelGolf

5 ай бұрын

Sorry for the late reply… The turf just floats on top of the gym tiles and doesn’t move.

@maxwelldaniels2784

5 ай бұрын

@@PixelGolf awesome, thank you!

Hey, first great video really informative and love the setup. You mentioned going through different launch monitors. Im currently trying to decide between the new SkyTrak+ or spending a bit more on the Bushnell Launch Pro. Any thoughts between those two units? I think you mentioned you run BLP? Any insight would be great as its the most $$$ and arguable most important decision of the entire build.

@asherchung9614

5 ай бұрын

Its up to you. They both get the job done. For skills assessment & bag mapping go with skytrak+. If you're looking for something closer to trackman with more data, go for bushnell. Just warning you that bushnell will cost around $750 annually because of gold subscription and gspro. By no means does skytrak+ lack in quality compared to bushnell, but the bushnell is a bit more robust. I went with skytrak+ because I couldn't justify paying 1k more upfront along with $500 more annually for less lag and angle of attack. Hope this helped.

@PixelGolf

5 ай бұрын

Thank you Kevin! I have yet to try the Skytrak+ unfortunately, but I can speak for the LaunchPro/GC3. I really believe that the LaunchPro has everything 99% of people need and the Foresight fitting software and technology is awesome, which is why you see it used for club testing by a lot of the big names. In conjunction with GSPro software it truly is an exceptional way to go, but the Annual membership may be a deal breaker for some. My advice would be to get a GC3 if you have the budget, or get the LaunchPro and maybe after the first year you can make the decision to unlock it a drop the annual fee. I’ve seen the unlocked option go on sale a few times too.

@kevinjung442

5 ай бұрын

@@asherchung9614 how has the skytrak+ been with misreads/no-reads and also how is it when doing shorter chip shot accuracy and putting for sim golfing on GS Pro or E6?

@asherchung9614

4 ай бұрын

@@kevinjung442 Haven't tested it in E6 yet but it experiences mis-reads when you thin the ball or if the background matches color with the ball. Like if I thin the ball or just hit it terribly it'll misread, which isn't a bad thing because i couldn't care if it reads a ball that goes 5 ft. Its pretty accurate on the short shots and havent tested putting. Im happy with it.

Where did you get that rolex clock? Looks awesome!

@PixelGolf

5 ай бұрын

Thank you! I actually made it myself. I’ve seen it throughout the years at PGA events and being a big watch guy, I decided to build it myself.

@ericbruhn8919

4 ай бұрын

@PixelGolf. Would love a tutorial on how you made that clock. I’ve seen the wall clocks online

For whatever reason, I only hear your audio in one ear. Made it a little difficult to listen.

@PixelGolf

4 ай бұрын

Thank you for this feedback! I will definitely look into this and make sure it is mixed for headphones correctly.

@bigham3987

Ай бұрын

@@PixelGolf clearly did not figure out the headphone issue lol

Hey , very informative video. I’m in the process of learning how to design my golf sim in the garage w the measurements 100 inches height x 134 inches width x 69 inches deep. Any suggestions??

@PixelGolf

5 ай бұрын

Hi Armando, I’m releasing a video this week that is showcasing a tool that should be very helpful for this! Make sure to subscribe and you’ll see that pop up!

@armandoramirez1757

5 ай бұрын

@@PixelGolf can’t wait! Subscribed!

brother, can u also make a baseball DIY next? PLEASE

What did u use to connect your computer to your projector?

@PixelGolf

4 ай бұрын

Just one hdmi cable. Links are in the description. I have since changed my projector to the 4K BenQ, check the channel for that video and a more detailed overview of projector setup.

What is the height of your ceiling over the hitting area?

@PixelGolf

2 ай бұрын

Roughly 9.5’ high.

What is your ceiling height at your swing area please?

@PixelGolf

4 ай бұрын

My ceilings are sloped, but it is just over 9.5’ at the location I hit from.

Where did you buy that clock from? Unreal!

@PixelGolf

18 күн бұрын

I made it!

@eddielau7062

4 күн бұрын

@@PixelGolf It looks great! Can I ask did you mount if on stretch canvas? Or just made from wood?

I have a room ver similar. I’m worried it’s going to be very loud for the family. Is that a problem for you?

@PixelGolf

18 күн бұрын

Irons are not too bad, driver can be loud… but, usually when I’m in there the fam is hanging out or playing anyway.

Do you have a video about your portable set up?

@PixelGolf

3 ай бұрын

I don’t unfortunately

I don't have a permanent place for a sim. Your enclosure - Do you think it is feasible to use 2 or 3 furniture dollies to be able to roll the enclosure maybe 10 to 15-ft out of the way when not in use? (I know this is a pretty unusual question for this).

@PixelGolf

4 ай бұрын

Not unusual at all! I can easily roll my turf up, remove the gym mat and slide my whole enclosure out of the way. I’ve done it a few times actually.

@tedtryka1198

4 ай бұрын

Thanks for the response. That's good to know. Did you use furniture dollies or some other method? @@PixelGolf

Do you have to subscribe for the monitoring unit

@PixelGolf

5 ай бұрын

Only if you get the Bushnell LaunchPro there is a subscription unless you pay to unlock it or buy the GC3

Where did you get the Rolex wall clock

@PixelGolf

2 ай бұрын

I actually made it.

I just want a hitting screen bay and a projector, I have the rest of what I need, where can I get those in a bundle

@PixelGolf

5 ай бұрын

Links to the screen/enclosure are in the description and some projector recommendations as well.

I’m not sure why but for some reason the synthetic turf website says shipping will cost almost the same as the price of the turf which is ridiculous. Did you have the same issue?

@PixelGolf

4 ай бұрын

I got it locally. Honestly, the best way to save some money is to Google Maps “putting green turf” or “artificial turf” in your area. There is typically a few suppliers and you just want a putting green turf that rolls the ball true. They usually have some demo areas at their building. Ask for end of roll pieces, you might save even more!

I know you built your own hitting strip, but I feel like I am missing something... Most of the hitting strips you buy seem to be 1.75 inches in heght, if my floor consist of 1" foam tiles and putting turf, wouldn't my mat be sticking up approx. 3/4" ? Yours looked pretty flush. Thanks for this video it has me wanting to redo my area.

@PixelGolf

4 ай бұрын

Yes, I built my own so I can get the depth right and make it the exact size I wanted. With the 1” gym mat and putting turf you end up roughly around 1.5” and most strips would stick up about 1/4”. You could add some kind of uderlayment to raise the surface up higher to accommodate for this or build your own so you can set the exact height. I also liked building my own as it allowed me to add a real tee where other divot hitting insert don’t have this. We have a video on the channel if you’re interested in building one.

Where to source the shallow putter hole?

@PixelGolf

5 ай бұрын

This can be found from the links in the description to BirdieBall.

Is there a cheap golf swing simulator that tells me my swing path?

@spensercote1274

17 күн бұрын

lol

Weird question but that course with roller coaster isn’t real right?

@PixelGolf

3 ай бұрын

That’s Hershey Park on GS Pro

Ok, I'll bite. How many watches do you have? Lol! 😂 You need a Batman though. (One for sale 😉) Great video. Thanks!

@PixelGolf

3 ай бұрын

I don’t have a lot actually… I did have a Batman at one point, but moved it for the Daytona. Definitely plan on getting another at some point

@Greg-zx4zg

3 ай бұрын

Very beautiful piece.@@PixelGolf

I put in your exact measurements and it tells me that it wont fit and wont let any of the other settings be adjusted. I tried making my room size 200 x 200 and it still just says it wont fit lol. Guess they dont wont to sell anything.

@PixelGolf

4 ай бұрын

Hmmm, might be a site glitch.

My space is 10’ wide x 20’ long x 9’ tall. Is that enough space for a sim, even if I do irons only?

@PixelGolf

6 ай бұрын

10’ will be tight but you can make it work. You’ll likely have to hit offset from center, but pretty much all of the sim softwares have this correction,

how far from the screen do you hit from?

@PixelGolf

6 ай бұрын

Hello, I hit 9’ from the screen

@PixelGolf

5 ай бұрын

@johnstroz7618 If you mean 9’ ball to screen, yes it does! I ran mine 9’ ball to screen with the unit 7’ behind the ball and received very accurate readings.

how much all in?

@PixelGolf

3 ай бұрын

Really depends how on the setup. My original setup: Mevo+, GT1090HDR projector and basic gaming laptop was under 5k with everything. Really, the screen and turf will cost you around 2k, the other cost are dependent on what you want. If you have a budget to work with, give us a call. Happy to help!

This video is convincing me to buy this despite A: this is out of my price point atm, and B: I live with my parents LMAO

How in the world did you convince your wife to let you put this in that location of your home? Lol

@sneak-a-leek2135

21 күн бұрын

When you have 100% of the responsibilities in a marriage (pay bills and provide) you gain pretty much 100% authority.

@PixelGolf

18 күн бұрын

She’s a keeper! Most people are too concerned with having a formal sitting room that no one uses… That’s not how we roll😂 A home should be an extension of yourself and what you enjoy, not a canvas to conform to the norm. My wife’s also grown quite attached to it over the years, if I tried to take it down she would likely kill me🤣

I wish I can talk with someone just to ask some questions before I start the process

@PixelGolf

5 ай бұрын

Happy to talk and answer any questions you have. You can email me pixelgolfco@gmail.com or call/text 602.430.0279. -DJ

Can you comment on your GC2 experience?

@PixelGolf

18 күн бұрын

It was great, but GC3 is the perfect home launch monitor imo.

Can you have your wife call my wife and convince her to let me do this?...🤣 I have a formal dining room right off the front door, like your space, that gets used once a year for Christmas...We'd get so much more use out of it as a SIM with a projector for other things.

@PixelGolf

18 күн бұрын

Haha, I hear you! This room is kind of a bonus room that has been many things over the years, all of which led to it never being used, until the sim. Now we get a ton of use out of the space and if I ever needed the space it all comes down in under 30 minutes. But, when guest are here, it’s definitely an entertainment area that everyone gravitates towards!

Why is a $400 projector not good enough? Why is it important to spend $2K?

@PixelGolf

4 ай бұрын

If you can make a $400 projector work for your setup, there is definitely nothing wrong with that and you should first and foremost stay in the budget you’re comfortable with. Typically, more affordable projectors have less brightness that make it difficult since you’ll need ambient light in order for the launch monitor to clearly see the ball and with less brightness from the projector you’ll have to use less ambient light to see the image. In addition, most affordable projectors don’t have a short throw ration making them have to mount further back from the screen to fill the image and typically will cast a shadow from the person hitting. There are however some great affordable options out there and you don’t need to overspend if it’s not a good financial option for you.