How To Build The Daytona International Speedway In Four Lanes Using Carrera Digital Track

Тәжірибелік нұсқаулар және стиль

Hello everyone. Today I will show you how to build the Daytona International Speedway in four lanes using Carrera Digital track.
Located in Daytona Beach, Florida, United States, the Daytona International Speedway is a race track that opened in 1959. It has been the home of the most prestigious race in NASCAR, the Daytona 500 since 1959. The track also hosts races of ARCA, AMA Superbike, IMSA, SCCA, and Motocross.
Built in 1959 by NASCAR founder William "Bill" France Sr. to host racing that was held at the former Daytona Beach Road Course, his banked design permitted higher speeds and gave fans a better view of the cars. In 1988, lights were installed around the Daytona International Speedway track, and today it is the third-largest single-lit outdoor sports facility. The speedway has been renovated four times, with the infield renovated in 2004 and the track repaved in 1978 and 2010. The track is 50 miles north of Orlando, Florida.
So how does a person duplicate the Daytona International Speedway using Carrera 1/24th - 1/32nd scale sectional track pieces?
First off, we are building this track on four 4' x 8' tables arranged in a rectangular formation for a length of 16' and a width of 8'. I clamp the tables together on the table edges underneath where the clamp won't hit someone on the legs. Table leg height is 35".
You will need two boxes of R3 and R4 high banked track a digital start/finish gate and lane extension track, straight sections and switches. We also have the analog style crosses in this layout for excitement.
Here's how it's built :
00:00 - Introduction and some items to look out for when building your track
00:38 - How long does it take to build this track? - High Speed Track Build
02:29 - Let's walk around the track and see what pieces I used
07:53 - Where to find all my other amazing track builds
08:22 - The track in action!
10:59 - Outro and a look at our next upcoming race league
11:31 - A shout-out to all my Patrons.
I hope you found "How To Build The Daytona International Speedway In Four Lanes Using Carrera Digital Track" useful and if you have built this track, why not share your pictures on our Facebook page located here : / monster-hobbies-in-hig...
If you liked this track build, please check out all my other builds on Patreon!
/ monster_hobbies
And don't forget to check out all our available slot cars and track at our web store, www.monster-hobbies.ca
Thank you again for watching!
#slotcarracing #slotcartrackbuilding #monsterhobbies

Пікірлер: 26

  • @jeansebastienamyot179
    @jeansebastienamyot1793 жыл бұрын

    Hello Trever ! Fantastic set up, as soon as I move to get a complete basement to myself ‘ll built one! Question: What rules do you use when racing regarding cars ending off track ? Is it like, after 2 offtrack you’r out of the race? I’ve been doing race party’s for kids birthday for years and was rules to male the race fair. Thanks for replying

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    3 жыл бұрын

    We use to give everyone playing cards. Each person got 5 and if they fell off the track, they had to loose a card. Once they were out of cards, they had to remove their car from the game. that stopped a lot of the "Wild" guys from rear-ending everyone in a "Mad Max" death race.

  • @WilliamBrown-gh4ul
    @WilliamBrown-gh4ulАй бұрын

    Wow monster hobbies I plan to copy your layout 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    Ай бұрын

    Good luck!

  • @clproductions4743
    @clproductions47434 жыл бұрын

    Looks very awesome

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    4 жыл бұрын

    Thank you very much!

  • @rickyfrench1262
    @rickyfrench12622 жыл бұрын

    Awesome display. Thanks for the video. I wanna make a Daytona shape track but just 2 lanes for now. Just getting into this digital slot car racing. So it’s gonna be awhile before I have tracks to make a 4 lane.

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    2 жыл бұрын

    Nothing wrong with a 2 lane set-up. It will make it more challenging to pass. Have fun! :D

  • @rickyfrench1262

    @rickyfrench1262

    2 жыл бұрын

    @@monsterhobbiesonlinestore I wanted to make a Dover /monster mile type track. I was thinking high banked 2/30 or 3/30 . Would I need some 1/4 straights between the regular straights and the banked curve tracks? I haven’t gotten any of those tracks yet but I wanna make sure I’m not missing any when I place my order. What recommendations would you suggest? Thank you

  • @SteveMagr
    @SteveMagr4 жыл бұрын

    Well done bro!

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    4 жыл бұрын

    Thank you Steve! It's been a while! Miss you man!

  • @bryanfarrell9745
    @bryanfarrell97457 ай бұрын

    Been looking at your 4 lane videos to plan a build. Do you have to use the 3 analog cross overs to move from outside to inside lanes, or could you use a double digital cross to switch between the two outer and two inner lanes? I get the forced crosses to make people switch lanes but wanted to know if it’s possible to do it without the manual crosses.

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    7 ай бұрын

    You should be able to for sure. The only reason why I used the forced crosses is because we had racers that would fly off to the outer track circle and floor it. That took all the driving skill away.

  • @johnniehobby
    @johnniehobby4 жыл бұрын

    Looks more like a hybrid between Indianapolis and Charlotte motor speedways.

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    4 жыл бұрын

    Thank you. I can only go as far as my tables allow....I should build these on the floor instead and have everyone race on their knees! LOL!

  • @johnniehobby

    @johnniehobby

    4 жыл бұрын

    @@monsterhobbiesonlinestore I hear you. Space on a tabletop always factors into design, especially with Carrera since it's actually 1/24 scale track. You run out of real estate real fast.

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    4 жыл бұрын

    @@johnniehobby You know it! i also see that my "tubes" on each curve section for the support legs are prone to crack unless I screw it to the table top, which doesn't really work out for me.

  • @jamesdickey5407

    @jamesdickey5407

    4 жыл бұрын

    Nothing wrong with Indy💪💪💪

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    4 жыл бұрын

    @@jamesdickey5407 I just wish Carrera would make the cars for it.

  • @ganeshbhandari5042
    @ganeshbhandari50423 жыл бұрын

    Hi can you show how we can use wired remotes to control 6 cars at a time

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    3 жыл бұрын

    Are you talking about the Wired Digital system?

  • @joe6785
    @joe67854 жыл бұрын

    Cool! What’s the scale of the car? 1/24 or 1/32?

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    4 жыл бұрын

    We race 1/32 scale cars at my store, however, if you get the outer curve extension pieces, you can run the 1/24th scale cars.

  • @nasanction
    @nasanction2 жыл бұрын

    I'd take out every squeeze track.

  • @monsterhobbiesonlinestore

    @monsterhobbiesonlinestore

    2 жыл бұрын

    Hope you have fun with your track!

  • @nasanction

    @nasanction

    2 жыл бұрын

    @@monsterhobbiesonlinestore I hope you have fun chasing crashes!

Келесі