How to build tapered exhaust cones start to finish.
Welcome to my video on how to make tapered exhaust cones. In this video we will cover the processes start to finish on how to execute any size exhaust cone.
We will cover how to calculate your sizes, how to make your template, cutting out your pieces, and most importantly the rolling process of the cone.
Whether your an experienced fabricator or just a beginner I hope there is value and knowledge to be gained from how-to tutorial video!
Enjoy!
Пікірлер: 45
If you extended the side layout lines till they intersect you can use that point to set a radius to scribe the inlet and outlet. To make things easier implement a tip-up the first 5-10mm of material in a brake press, pan brake, or over a edge. This allows the slip to get a more consistent seam with less work hammer forming the last bit trying to achieve the same results
@KULLYCO
6 ай бұрын
thanks man! will take that into consideration!
Yup definitely wanted to learn how to make a cone and now I get the idea👍🏽 gonna get to practicing tomorrow
@KULLYCO
Жыл бұрын
That’s awesome man- glad you were able to get value from this. Reach out with any questions you have!
Just found your channel, very informative! Thanks a lot man! Cheers from Indonesia!
@KULLYCO
Жыл бұрын
Hey! You are very welcome, sir! Thank you for checking out my channel.
I am just making my first cones but in mild steel to make it easy , this video is perfect. Thanks a lot!!!
@KULLYCO
Жыл бұрын
I’m glad you got value out of it- thank you for watching . Good luck on your cones !
@keaganairey1413
Жыл бұрын
Thanks so much dude! Need to make a shroud for my fume extractor! I've got some cold rolled sheet lying around so I'm going to give this a crack. Cheers from South Africa!
@KULLYCO
Жыл бұрын
@@keaganairey1413 your welcome man! I’m glad i can help! Keep me posted on how it goes
Who would have thought that 2*Pi/2=Pi??? Wow!!!
@KULLYCO
Жыл бұрын
Lolol
@KULLYCO
Жыл бұрын
Pretty involved stuff , i know !
Awesome content, thank you for sharing!!
@KULLYCO
10 ай бұрын
You bet ! I’m glad you enjoyed the video !
Can you now show us how you fill the cone for good sounding exhaust? And also how can we easily bend the pipe for building it out the headers.. Great work!
@KULLYCO
Жыл бұрын
Couple things here . 1. The cones you see in the video are megaphones , they are part of the header system . There is an addition unit that goes beyond the cone , what we call a muffler or a canister that actually gets the perforated core with packing . (Where you get your exhaust sound) We do not mandrel bend tubing in our shop , all of our tubing gets ordered in from suppliers Thank you for the questions and thanks for watching
masterful work good luck to you
@KULLYCO
Жыл бұрын
Appreciate it , sir - thank you for watching
Very well done video easy to understand
@KULLYCO
Жыл бұрын
I appreciate that man, genuinely. I’m still pretty new to the KZread game but enjoying the process .
@amcustomfab
Жыл бұрын
It's definitely a grind. But it's fun to help people out and add value . Just now starting to see some fruit from all the hard work. Always excited to find a new Fab channel that does quality. 😎
Nice!
@KULLYCO
Жыл бұрын
Thank you, sir ! Appreciate you watching
How would I know how large or small of a cone (length or diameters) I need? Is it a guess and check situation or is there a calculation I could do?
This is what i'm looking for.Thank you so much By the way,can you make a video how to calculate an angle for merge collector?
@KULLYCO
Жыл бұрын
That would be a great video ! I will see if I can make a collector video soon! Thanks for watching
Mint
@KULLYCO
Жыл бұрын
Appreciate it- thanks for watching!
6:25 "you need to kind of rotate the piece" Not if you use a snubber. The snubber acts like a pivot point and the sheet metal turns by itself.
@KULLYCO
2 ай бұрын
that would be helpful! My cone rolling program is probably a bit out dated :) lol
What's your estimated fab time for a single cone and do you think that time could be cut down significantly when using a softer material such as aluminum? I build intake plenums and require cone reducers, which I have to purchase at $25ea + shipping, in my design. If build time is under 30 minutes then that would save so much $$$.
@KULLYCO
Жыл бұрын
Hey ! Thank you for the good question. I think once you get your template/ process down you could build several cones in 30 minutes . It probably only takes about 10 minutes per cone by the time it’s rolled and tacked up if you know what your doing
What does the length do for it? Does a longer cone yield more performance?
@KULLYCO
7 ай бұрын
It depends on the engine combination. There is still a lot of question marks in the exhaust industry. All the teams I work with try a variety of exhausts with every engine package.
I thought it was Jared Leto 🤣
@KULLYCO
Жыл бұрын
It is Jared Leto ! 😂
Where's your true length line's??
@KULLYCO
Жыл бұрын
I don’t believe I’m familiar with what your taking about
Why does fool talk so slow
@KULLYCO
Жыл бұрын
Sorry man! Just the way that i am :)
Interesting video showing the basics, ...... But why not show the correct procedure for the end curvitures .
@KULLYCO
10 ай бұрын
I just usually roll the cone and then sand the end flat . I don’t get too carried away on the end procedures
Do you not know how to mark it out properly 😂