How to build a Treadle Lathe: Part I
Ойын-сауық
In part I, I start milling some rough sawn oak to use as the frame and I have assembled the needed hardware to make a functional lathe. I am using multiple sources in this project as reference material. I have listed the reference material below.:
How to build a treadle Lathe by Steve Schmeck
Lathe from a Loft by Roy Underhill
Treadle Lathe by Mr. Chicadee on youtube.
The hardware needed for this project is:
1/2" steel Rod
5/8" Steel Rod
3/8" plumbing flanges
1/2" and 5/8" stop collars
1/2" and 5/8" Bearings
Shopsmith Lathe 5/8" Bore drive spur and MT2 Cup center
Morse Taper drill sleeve MT2
I am committed to building this project using only hand tools and I invite you to watch the video series.
Thanks for watching!
Пікірлер: 33
Very cool. About to binge watch the series 😊
You'll build it. You've got determination. Looking forward to the videos.
@lastingbuild1373
5 жыл бұрын
Thanks Monty!
Good project...I like this kind of old lathes...Cheers from Turkey... Also This kind of lathes used for small metal works in Turkey...They call them plumber lathe...but this is very different...and nice...
@lastingbuild1373
5 жыл бұрын
Thanks for watching. I hope you will follow along!
Thanks for making the video so I don’t have to. I been doing lots of research myself on the same thing. Great resources, but vague on the details for the hardware. Thanks again I’ll be following you along the way. 👍👍
@lastingbuild1373
5 жыл бұрын
Glad you like the project!
Looking good! Let me know if you have any questions.
@lastingbuild1373
5 жыл бұрын
Mr. Chickadee thanks!
Subscribed! Looking forward to watching this build. Thank you for sharing.
@lastingbuild1373
5 жыл бұрын
Thanks Adam!
I’m considering adding a 5 or ten lb weight centered on the fly wheel from an old bar bell set I have. Looking forward to your project.
@lastingbuild1373
5 жыл бұрын
ludvig tande thanks for watching! My plan is to have more weight on the periphery of the wheel than the Center.
I just happened upon this series and I’m really interested to see how this build goes!
Your 100th sub :) Congrats!! Good explanations of how it works. Cheers!
@lastingbuild1373
5 жыл бұрын
ELEmentes: para estudiantes de español thanks for watching!
This could be an interesting project!
@lastingbuild1373
5 жыл бұрын
Thanks for watching! I hope you will follow along!
Just found your site thru Homemade Tools.com Interesting builds. Look forward to viewing all your videos. Great jobs & interesting so far as I have seen so far. Thank you for sharing your love of woodworking. Thanks
@lastingbuild1373
5 жыл бұрын
Welcome! I hope you enjoy! Thanks for watching.
Looking forward to watching you in action. Cool project
@lastingbuild1373
5 жыл бұрын
Thanks David! It should be fun.
Good, I'm your subscriber#292👍
@lastingbuild1373
5 жыл бұрын
Thanks David!
I was actually thinking about using an old 24" bicycle rim I've got laying around. Might make the whole system a little lighter and quicker especially with that clutch on the gears if I could get it to work.
@lastingbuild1373
5 жыл бұрын
That would be interesting to see
Just caught up with this on the other side of the pond, I presume it is finished now? Still subscribing as I'm looking forward to following this project (albeit retrospectively 😉😉)
@lastingbuild1373
5 жыл бұрын
Yes sir! The build series and a final summary video is on my channel! Thanks for watching and let me know what you think.
Olá tudo bom! Qual é espressura do eixo da polia, qual são tamanho do rolamentos que você usou
Looks fun. You don't need a gym membership!
@lastingbuild1373
5 жыл бұрын
That is true! Its a good workout to hand plane and saw by hand.
Where are the programs for treadle lathe. I can not find the part for the top of the lathe Thanks Syd