A friend and I recently used your instructions to build this jump for a highschool mountain bike team in California. It was a hit with both the kids and the parents! We watched your video over and over as we built everything to spec and wanted to thank you for making such an excellent follow along video to pair with the blueprints. We are two women and the dads on the team were notably impressed. 💪

@LunchRide

2 жыл бұрын

I can't tell you how happy this makes me. Thank you very much for letting me know!

@howarja

Жыл бұрын

Yep, our season is just ending! I'm going to build this out of pressure treated lumber for our short course / skills course!

Thanks for the time you took to make these plans. I just finished my own version! I absolutely love it!! A couple of changes I've made; I used 3/4" Plywood instead of 1/2" and installed a handle on one side and a pair of 3" rigid casters on the other side so it rolls. It's awesome!

For any Aussies out there your Bunnings list is: 2 | 90mm x 45mm x 5.4m H3 timber ($64.60) 1 | 1200mm x 1198mm x 12mm plywood board ($30.09) 1 | 12mm x 1.2m pine dowel ($4.37) 2 | Padbolt Double Eye Pinnacle 200mm x 12mm ($13.62) That's the hitch pin when you cut the knob off. 1 | 10g x 40mm 100pk treated pine screws ($8.74) 1 | 10g x 75mm 50pk treated pine screws ($8.93) 1 | gate hook&eye 3pk ($2.15) 4 | 85mm hinge ($9.84) 4 | M12 x 110mm bolts ($8.52) 16 | M12 washers ($4.64) I couldn't find spring washers so used loctite. 4 | M12 nuts ($1.32) Total Cost: $156.82 (presumes you have PowerPass otherwise add 5%. Presumes you have wood glue already). Total Time: 6.5hrs. 80% of which is trying to cut 81 and 61 degree cuts then drill the dowel holes. I ended up screwing the legs to the other board and doing a free hand cut with the circular saw. Using the jigsaw resulted in the blade bending and throwing away that leg. With 2 x 5.4m lengths there's no additional timber if you need to re-do a leg. Add 30min looking for pencils, square and clamps that you "literally just put down right there". Total Weight: 33kg (pretty heavy and awkward to get in the ute). Tips: - Once you've cut and assembled the legs that will fold back, measure their combined width (when folded) then make that your cross brace width. Otherwise you'll cut the cross braces to length as per the plan (to determine the width of your ramp) then fold your legs and they'll overlap (if you're like me and aren't that accurate). - Cut the 1200mm x 1198mm plywood the width of your jump then use that long side piece offcut for the top panel. Don't cut the board the length of the piece you need otherwise you'll end up using two pieces of plywood on your top panel as it's no longer wide enough. - Leave the gap between the plywood wide enough to get your hand between, it's heavy and tricky to carry without getting a hand in there (I did the width of a window packer). - Do what my neighbour did: Send this video to your neighbour and get him to build it. Excellent ramp and thank you for putting this video together! The plans are great (missing a few pieces of hardware off the shopping list) but a well put together video, design and end product!

@chrismcculloch9041

3 жыл бұрын

Mate, you are a bloody ripper!

@jdenomy9340

3 жыл бұрын

legend !

@jonrodrigues1158

2 жыл бұрын

Cheers Greg E 2022 price is a smidge over 200 buckaroonies

@DavidPaget

Жыл бұрын

I wish I had read this before I went to Bunnings! Thanks for sharing.

@geoffreylambert2862

Жыл бұрын

What a legend!!!

I've never been more excited to build something!! thank you for sharing your amazing know-how and talent with all of us!!

Thank you Cody, I'm just about finished with the build and can't wait to ride it.

Was looking for jump design ideas when I found this video. Awesome!. Already built my own from your design. I subscribed now also and looking forward to seeing what else you have done and will do.

Just wanted to say thank you for a great set of plans and even better video. This is my first build of any kind like this and while some of the angles were a doozy, really happy with how it turned out. Having a ton of fun practicing my jumps!

Wow, great creativity and wonderful video. Thank you so much for sharing it with everyone, I'm sure to make one this winter!

Fantastic build, this will be a great winter project for me! Very practical and elegant. thanks

Just finished building this. Really great ramp, great video, great plans. One change I'd make if building this again would be to make it 28 inches wide instead of 30. If you do this then you only need one half sheet of plywood for the whole thing. Thanks, Paul

@edwinbruce3974

6 ай бұрын

Thanks for the info Worth that you will only use half plywood😁

Thanks so much for this video. I download the plans and built the ramp. It's stores away really conveniently and given me so much more confidence.

Brilliant design! You've completely succeeded in inspiring me to put one together!

Just finished building this and wanted to say thank you! The the blueprints and the video were very thorough and easy to follow.

Such a great video, i really enjoyed all your tips and tricks as well! It gives me way more confidence trying to tackle something like this.

Awesome ramp. And just what I was looking for. Will plan to build

Nice work! I’ll be adapting this for my own build. Thanks! I also like your hack for drilling straight holes with a power drill.

Awesome design and excellent instructions! Thanks for your hard work on this project and for sharing it with the riding community! Job well done!

@LunchRide

3 жыл бұрын

Thank you very much!

Awesome build - thanks for sharing your plans!

Dude, I'm so glad you made this! Definitely on my short list of things to build next! Thanks! As always, great video, production quality, sound, and content. Keep 'em coming!

@LunchRide

4 жыл бұрын

Right on! Thank you very much!

Boy, that thing is freakin awesome! Thank god youtube proposed that one after I already watched 10 other videos for building a ramp, because now I know what we gonna build! Thank you very much, bro!

This was exactly what I was seeking. I subscribed, and beyond that, will be searching for other videos on your channel that are make sense. Your style is excellent. Thanks!😀😁

@LunchRide

3 жыл бұрын

Awesome, thank you!

Cody, I think I've seen all the "how to build your own kicker/jump" vids on KZread in the last week or two. Yours takes the cake! Well done, all of it; the design, the plans, the vid! You earned a new subscriber.

this is a great design. great shots. I'm gonna be building it taking it in my van that i live out of and jumping over stuff and making videos. I'll post a link when the first one's up. i ride electric unicycle. thanks 🙏

Really like the design. I'll be making a start on this as soon as I can salvage some wood.

Loved this video first one I have seen of yours but believe me I’ll be going back and viewing your others. I have been looking for kicker ramp plans and the idea of the adjustable kicker is brilliant. Thank you so much. You have a new subscriber 👍

@LunchRide

3 жыл бұрын

Sorry for the late reply! Thank you very much, I hope you enjoy the other content!

Props to the Elton brown of mtb! Love this channel. Thx

@kevinbiddle5444

4 жыл бұрын

Now I can't unsee it.

@LunchRide

4 жыл бұрын

Yeah, I get that. Thanks man!

@donotrobme9295

4 жыл бұрын

Lunch Ride I hope u see that nothing but a compliment. U explain it. Break it down. Have knowledge. Camera angles. He’s my favorite. Keep up the great work! Thank u!!!

Mate. Just finished building the ramp using your plans - great job and thanks for sharing such a good set of plans. (I made a few errors, but nothing to do with your plans!) Tested it last night and it made me feel like a kid again - 50 going on 15! Thumbs-up from "Downunder"

Always happy to see a new Lunch Ride video. Now I know what to do with that spare sheet of 1/2” plywood I have in the garage!

@LunchRide

4 жыл бұрын

Thanks for watching! I'll get those plans up soon!

Just made one off your plans. Great ramp. Thanks😊

great build and great guide. Love your way of explaining it!

Thanks for sharing such a fun and solid design. The video and plans are excellent.

@LunchRide

3 жыл бұрын

Thank you very much!

Love it. I'm going to attach the first part of the ramp with pins also so I can remove it to make shorter to fit in backseat of my car. Wish I could figure out a way to make that part articulate and fold back on itself for ultimate compactness! Great job and thanks for sharing.

This is awesome! I’m pretty excited to make this

What a great project. I really want to recognize that you went from concept to finish product and you filmed it in a way that is easy to follow. That is a lot of effort, time and a conglomeration of skills with execution. I’m a self employed renovation/finish carpenter, I’ve been putting a tool belt on every day for 30 years. I look forward to building this with my son. My only suggestion is to use glue everywhere possible. Wood glue is good, construction adhesive would be best, it will bond into places that are gapped. The racking strength and durability would be much greater.

Thank you for the explanation and plan! I just built a replica, adapting few measures here and there to adapt to the plywood and I had, which meant shortening the legs so they still fit in storage place. Your video kept me going as I went through the various stages, thank you!

@LunchRide

3 жыл бұрын

That's awesome to hear. Thank you!

Definitely building this! Thanks for putting together an incredible build and equally awesome video

@LunchRide

3 жыл бұрын

Sorry for the late reply. I hope it goes well. Tag my instagram with a pic of it when it's done! Thank you!

What a legend, can't wait to build this!

I’m going back and rewatching favorites and I gotta tell ya this build is awesome! As a fan of portable ramps, I love seeing how other carpenters/riders come up with new ways to recreate different jump types in a compact package. I will probably “borrow” some ideas to improve a few of my current ramps😁. Thanks, Cody👊🏻👍🏻

@LunchRide

3 жыл бұрын

I can't wait to see what you come up with! I'll be tuning in.

excellent design, simple, cheap and movable, I congratulate you for it. Regarding the design of the hopper, it is also easy to cut the pieces. If you wish, I can send you some CAD plans that I made. Cheers

Awesome as always!! Keep up the great work Cody!

@LunchRide

4 жыл бұрын

Thank you my friend!

We used your plans to make the original ramp and landing. Nice job! This is a well thought out design. Probably going "borrow" it too!

@LunchRide

3 жыл бұрын

"borrow" away!

Just finished mine. I redesigned the bottom pivot so that the entry section can fold around to the bottom for smaller storage size, but all the geometry is the same as the original design. This thing is super sturdy and feels great hitting it on my dirt jumper. Thanks for the project!

@adventurentwk

5 ай бұрын

Curious if you have a plan for this redesign? The smaller size seems like a great modification to an already great design.

I built this. Today was full send. Works a treat 👌. I hand tighten the bolts on the entrance so I can break it apart to fit in my car. Quite pleased, sir. 👌👌

Excellent idea, I built a ramp about 6 months ago and wish this video were around then. I wanted to mimic the foldable ramps but decided that was too difficult, not anymore! You earned a subscribe.

@LunchRide

3 жыл бұрын

Right on! Thank you so much!

This is awesome and you deserve some sort of 'Order of America' medal Cody! The plans are fantastic, this is my Xmas project for my 6yr old, 3 weeks to get it done!

@LunchRide

3 жыл бұрын

Geez, what a compliment! Thank you so very much. I hope your project goes well!

Hey thanks for sharing this!!! I totally made one for myself and I made a few small changes but it came out AWESOME!!!

@LunchRide

2 жыл бұрын

That is awesome!

Great project and fantastic end product, Cody! After attending a jump clinic just last weekend I have a burning desire to build a ramp like this one and progress with my skills. Thank you for putting this together 🤙

@LunchRide

3 жыл бұрын

Let me know how it comes out!

Awesome bit of kit made it to drawings, giving me loads of confidence now thanks.

@LunchRide

3 жыл бұрын

Great to hear!

No paywall, No newsletter or anything attached to download the plans. Thanks a freaking lot. I'd like to pay for these plans. The plans even include a metric version! One note for improvement for the metric version: We metric peops don't have "two-by-fours" and although it is quite easy to google what 4 inches are, it would be nice to see this reflected in the plans aswell.

Wow! Clearly you spent some time on this! I will be clearing some space in my garage for this! Well done, Cody doesn’t make junk! 👍

@LunchRide

3 жыл бұрын

I try not to make junk! Thank you so much!

I'm going to try this for jumping my electric unicycle, looks really robust for how portable, awesome video thank you! 👍

Thank you for taking the time and effort to create this video and downloadable plans. Amazingly awesome job! I've Liked and Subscribed to your channel. 👍

@LunchRide

2 жыл бұрын

Awesome, thank you!

Cody, as so many people have said: thank you. Thank you for taking the time to develop the plans, thank you for filming the build and thank you for publishing it all. I built Phil Kmetz (skills with...) but will be taking the time to build yours now. Stay safe, be good and ride well.

@LunchRide

3 жыл бұрын

I love Skills with Phil! I wish you success with the project and thank you for the kind words.

OMG that is awesome!! I build 2 small ramps for my boys and they have been jumping all summer. This ramp takes it to the next level!! I could see towing this around in the chariot (now cargo carrier) and then setting up.

@LunchRide

3 жыл бұрын

Ha. Nice.

Great plans for a sturdy and portable ramp! This project is pretty easily accomplished with minimal tools, the only power tools really needed are a circular saw and drill. A miter saw would certainly make things easier but is not needed. The build cost me about $120 and took 6 hours. Thank you!

NICE!!! Portable kickers are perfect for skill development days! Good stuff man!!

@LunchRide

4 жыл бұрын

Thank you! Even for experienced riders it's a great set up because it allow you to choose if you want to go farther or higher, that's what we found.

Building this this week! Awesome job!

@LunchRide

2 жыл бұрын

Hope you enjoy it!

Awesome video and the instructions were professional! I started looking at the MTB Hopper yesterday morning to find ways to improve my wife and my jump skills. I'm so happy I was able to find this video. I went to my local hardware store the same evening and started building my very own ramp. **I did make one change to the design.** On the lower platform, I replaced the lag bolts with a hitch pin on each side so that I'm able to break it down a little smaller to fit in my SUV. It is a little easier to transport and seems really stable. Thanks again Cody! Looking forward to a portable solution for the table top and landing ramp.

@LunchRide

3 жыл бұрын

That is a fantastic idea! Thank you for sharing!

Hello Cody, thank you so much for this Video and the plan. Ride Save and greetings from Germany, 🤙Martin

This is really well thought out. Makes me think that If someone produces a bunch of these they could find homes in community trail systems in need of some features all over. 👍

@LunchRide

4 жыл бұрын

My wife has been saying the same thing! I’m taking orders!! 😉😂

Simply beautiful build.

@LunchRide

4 жыл бұрын

Thank you so much!

Wanted to thank you for the idea and plans on the kicker ramp. Just finished building it today. This is really going to help get me comfortable with my jumping skills again. At 51 i’ve just now gotten into mountain biking and feel like I did when I was 15 riding my BMX bike on N.C. trails. Thanks again for helping make this happen. Keep up the great vids.

@LunchRide

3 жыл бұрын

Right on! Send me a pic of the completed ramp! I want to see it!

@MTBKingLife

3 жыл бұрын

I’ll shoot you a pick and quick vid of me jumping on it tomorrow.

@MTBKingLife

3 жыл бұрын

@@LunchRide drive.google.com/file/d/1EfZZY3ZFjyOZ1ujmEOUJCVOAjIFCaoER/view?usp=sharing Hope this works. My first set up jumps in more than 35 years. Thanks again...

Nicely thought out

Great easy watching content. Good woodworking techniques for beginners too.

@LunchRide

4 жыл бұрын

Thank you so much!

That’s dope!!! Really portable ramp! Love it

@LunchRide

3 жыл бұрын

Thank you! I appreciate it!

Thanks for your efforts Cody-family love it. Stuffed up a few times with the build but that's what being impatient does to you😂 Also big thanks to Greg E for the Bunnings list -2022 price is around $200 Aussie bucks

this ramp looks awesome

Thank you so much i was lookin for a video like this!!

I feel the same way about the original kicker, that we made based on your video, it's amazing but.....it's heavy and takes up a ton of room (especially in the van) so do those Landwave Ramps and Decks. Thanks for taking the time to put this together for all of us! I wish we weren't so far away from each other, I'd pay you to make one for me 🤩. Hopefully I can sweet talk my dad into helping again, once it cools down...way too HOT right meow!

@LunchRide

4 жыл бұрын

Or... OR... maybe this fall we could meet part way like in Angel Fire or something... just putting it out there!

Subscribed! Love the design that's awesome!

That thing is a work of art!!

@LunchRide

4 жыл бұрын

Thank you very much!

my almost 9-year-old daughter has been itching to build something larger scale than she can do with magnatiles, lego, or k'nex and we just bought supplies to build this ramp (plus 2 spray paint colors of her choice!) she's spent 2 summers mountain biking now and is super excited both to build something and to have a jump at home!

Great job!!! Love it!

@LunchRide

3 жыл бұрын

Thank you!!

Nice work mate

This is amazing!!! Great work and many thanks for sharing the plans. I was wondering if it would be possible to make it lighter by using thinner wood slabs. Like 1 inch instead of 2. Thanks!

that is an awesome design, I'm copying it! as you said it's the best form of flattery.... :-)

Your blowing my mind 🌋 I'm working with a 2x2 meter storage room as my bike cave, it holds 2 mtbs, 1 road bike, 1 bmx, a balance bike and approx. 16 tyres. There's a work bench, shelf for bike stuff and a tool wall. And this is only on 2 of the walls. The remaining space has to hold the family's store away items. I've been dying to build a ramp but... So THANK YOU SO MUCH!!

@LunchRide

4 жыл бұрын

I can’t imagine how cramped that must be! I’ll try to get the plans out ASAP! Thank you!

Genius! But honestly, for a lazy ass like me, I get brain pain by just even thinking about drawing a sketch like that, let alone building the actual ramp! I already bought the MTB hopper Coach and I'm loving it. I'd pay $500 once and for all, and save my brain the hassle! Great video!

This is great I have SUBBED you because you have plans that are free Very easy to follow Great content Will build this tomorrow if I have enough timber, lock down makes it hard Thanks from 🇦🇺

@LunchRide

3 жыл бұрын

Thank you very much!

When your land wave ramps Max out your jump, time to graduate!!! I have my next project!! Ever think about making a table top for them to drops with?

@LunchRide

3 жыл бұрын

Sorry for the late reply. You know, that's a great idea and really, it's the first time anyone has suggested something for me to build. I need to work on this idea. Thank you!

Another thank you!

You are amazing. Great job. thanks

Thanks for providing quality free plans. This instructional video to go along with it is awesome. Already sharing this with multiple people. Quick question, do you know the rough weight of the ramp?

awesome build

@LunchRide

3 жыл бұрын

Thank you very much.

Hey dude...Sweet ramp. Gonna build it. I built your manual machine. Came out real nice. Thank you!!!

@LunchRide

3 жыл бұрын

Awesome! Thank you!

going to build this at the weekend

Thank you, you're the man!

Well, this is the coolest thing ever.

Lol well it looks like I am going to be building another kicker soon. This design looks awesome.

@LunchRide

3 жыл бұрын

Thank you. Good luck on the build!

I am just about to start this build and was calculating what scraps I have lying around that I can use. Looking into your plans I have two recommendations for future builders. 1- if the largest section of plywood is reduced to 29"x30" in size it is possible to get two builds out of one 4x8' sheet. That way you can invite a friend over and build two at once! 2- the weight can be reduced by using 2x3"s for the 'entry cross pieces' and 'lip cross pieces'. This is what I intend to do. I will leave the other pieces as 2x4"s.

Nice work!

@LunchRide

2 жыл бұрын

Thanks!

I just kick the legs off one side of a picnic table lol. Kidding. Great video.

@LunchRide

3 жыл бұрын

That would make a great lander!! 😂

That's great. Good job.

@LunchRide

3 жыл бұрын

Thank you very much! I appreciate it.

Bro!!! That is sick.

@LunchRide

4 жыл бұрын

Thanks, Lifty!

@LiftedAdventures

4 жыл бұрын

@@LunchRide well when I come up there again maybe we should make another for me. Ha

he has all the tools 👍🤠

I've come back to watch this a second time and realized you are really underselling the 16 degree final block. the block may be 16 degrees, but you need to add the first angle of the take off without any blocks, which is already about 30 degrees or so. So you have yourself a nice 45-50 degree take off angle to the ground at the max.

Really the best design i've seen so far...good boy!!

@LunchRide

4 жыл бұрын

I appreciate that. Thank you!

@lucasstr6121

4 жыл бұрын

How long till your plans will be available

GENIUS!

@LunchRide

3 жыл бұрын

Haha! Thanks, I try.

Thanks!!!

Thank you, I took you drawings and changed to make it more portable. So 520mm wide 1200 long. Put a double hinge on the entry panel so it folds in half. Total weight 15kg. Can't work out how to add a photo.