I watched this specifically because I searched for a small shop solution. My shop is 15' x 15'. Coolest feature: the drop-leaf extension wing.

That cabinet is really nice. I am going to build one for my new Ridgid R4222.

Most expensive edge guide I’ve seen in a while!!😳 Purple Heart 😂😂

My pastor just gave me his old miter saw: an old Ridgid he used at the youth camp for years. I'm looking to build a miter saw station for my small garage shop now. Thanks for the tips!!

There are a lot of great pointers in there, Matt. Thanks as always for pointing out where we can all do better.

I have the 36V cordless version of the same Makita saw. Absolutely love it! I love the extended miter angle capability.

Liked the euro hinges for the doors. Also watched the video specifically for the extension.

Matt, thank you for sharing this idea. My shop is even smaller than yours and uses about 3/5 of a one car garage. My miter saw is currently on what I believe is a cabinet that used to be in the kitchen next to the stove. I added the extension wing onto my miter saw station and because I don’t have any sort of in feed table, I actually added a drawer slider so that I can extend it even further, and it gives me an extra 24 inches. Because of the drawer slider it wound up being a little beefier than your build but I love it. Thanks again. You just helped make my shop safer.

Liked you miter saw station build so much, got your plans for it. I have a 20 year + old LS1220...

Nice and compact with plenty of storage. I love that! Especially since I don't have a lot of room at the moment. You can always get some plugs to hide your pocket holes if it bothers you that much. No one else would probably notice them, because the entire set up looks so nice.

For the exposed pocket holes, maybe make walnut dowels and plug them with that. “Make a mistake a feature”

@731Woodworks

2 жыл бұрын

Ahh. Great idea!

Not only are you an excellent teacher and wood works ng specialist, I love your witness you silently portray in your clothing! That's an amazing part of your videos , together with all your skills. God Bless!

Organized and thing of beauty!

I love the idea for the flip down extension table

I was able to pick up the festool kapex for $300 a local cabinet maker, had passed away his wife had to move! She just wanted it to go to good use!

Very nice build. Keep bringing these great build and woodworking educational videos. 👍

Looks great! I use a Hercules 12" compound miter saw, so far so good. Drooling for the Kapex, one day! Thanks for all you do for our community!

@badaphooko02

Жыл бұрын

I have a hercules to. Was 24'' in wide enough? This saw is huge.

You asked about miter saws. I currently have 2. My 12" dually slider Delta is currently at our cabin in West Virginia while I'm finishing out the cabin build. In the meantime, I picked up the 10" dually slider Bauer from Harbor Freight, and the adjustability and solid construction of that saw was a pleasant surprise. I really like it so far. Had it a couple months, and I feel like it took me three tune-up sessions to get it dialed in completely. So far it's perfect enough.

I have the Bosch 12 inch mitre saw which I still have to make a station for and I'm now going to look at adding the wing to the cabinets which is what I like about what you did

Bosch glide saw - 12" Nice job on the cabinet.

The walnut on the outside edges makes this look so good!!

@731Woodworks

2 жыл бұрын

Thank you

I use a Bosch miter glide 12”. Love it

Great video love the format thanks!

Great video. I decided on the Metabo HPT C12RSH2M for my shop. Absolutely a fantastic saw.

Best visual feature: featuring plywood face grain with walnut accents. Got a Craigslist Festool Kapex just completely rebuilt under warranty. I like your design but have a different set of requirements and materials on hand. I make a beeswax blend finish, too, though I recommend it only for kitchenware and intend to apply multiple coats of slightly thinned and finely sanded water based poly followed by traditional Johnson's wax to my shop furniture.

I just bought the plans as I think this will fit much better than the junkie one I built a number of years ago for my 14' x 16' shed shop, I use the Worse Task Force 10" mitre saw

Man sakes alive! This build is summore purdy! Lol. Love it brother! Great job! My favorite part is that inset drawer closest to the saw. Again Brother, well done!

@731Woodworks

2 жыл бұрын

Thank you

Love the wing.

Nice miter station is awesome I like the stop is great I think adding it to the wing would have been good too 🤙🏼

This is awesome! I need to make this rather than deal with my metal stand. Thank you as always brother!

The flip up side is a very good idea. Clean look! 🤛🏽🇺🇸

@731Woodworks

2 жыл бұрын

Thanks 👍

Im a big fan of your builds and channel style/personality. New sub here from Australia. Lots of inspiration and great honest processes without all that typical over hyped stuff of other channels. Keep up the great work and God bless 🤙

@731Woodworks

Жыл бұрын

Awesome, thank you!

The foldable extension is simple but fits the whole build perfectly. I started pocket jointery finally and I really love it. Makes building easier.

Amazing build! love the flip up extension wing I think that speaks to a ton of woodworkers. Like me, I’m one of them.

@731Woodworks

Жыл бұрын

Thank you

Looks good, brother!

Great power tip!!!

looks great!

Ridgid has a great hand blower that I use for dusting of the shop when needed, especially of you leave the shop vac on in the vacinity.

Impressive!

I wish I had your shop I'm in an 8x10 shed

I really like how you did the extension wing!! Does suck when stick on tapes are not accurate, so far I've been lucky as my fast Cap has matched my fast Cap tape BUT also matched my woodpecker items!!

@731Woodworks

2 жыл бұрын

Nice

Great job, looks awesome

@731Woodworks

2 жыл бұрын

Thank you

Nice work Matt! Thank you

@731Woodworks

2 жыл бұрын

Thanks brother!

I enjoyed this Impressive build project. Well done!

@731Woodworks

2 жыл бұрын

Thank you

Strongly considering building this with your plans, just ordered the 10" Delta Cruzer and want to do something more than the mobile stand

I think the coolest thing is it has a great look. Coming in a close second is the simplicity of the foldup mechanism.

I like how you made the extension wing

The coolest feature is you doing all the work lol. I don’t think there is anything I don’t like. God Bless. As he always does.

@731Woodworks

2 жыл бұрын

Thanks!

Very nice, I made a cart with folding wings for my mitre saw. It makes a big difference to my tiny workshop.

Awesomeness 👊

Hey brother Matt, I see we both have the same Makita miter saw I love mine, it's the best.

2:09 Ouch, that face is so relatable 😬

They do make a biscuits that fits inside of the pocket holes A little sanding to make them flush.

That’s a very neat, compact unit, Matt - nice job! I especially like the extension: it saves having roller supports or the like cluttering up the shop.

Kerg makes great plugs for the accidently exposed pocket holes. 😀

Nice work Matt

@731Woodworks

2 жыл бұрын

Thanks!

Thanks so much for the great shoutout. Love the way the sign looks up there. We are honored to have a spot on your wall!!!!

@731Woodworks

2 жыл бұрын

Thank you for the awesome sign! I love it!

I have the same makita saw. Its great

Looking good! I like the concept here for the extension arm. I am curious though to see how often you have it extended. I feel like I’d have mine up more often than I’d have it stored away so might just add more cabinets myself. Give us an update in a few weeks because in my one car garage compact is a plus

@731Woodworks

2 жыл бұрын

It likely depends on your typical projects. For me I don't use long stock a lot.

You know you've arrived when you can use a piece of Purple Heart as a straight edge! Great build, Matt! Love the unnecessary walnut!

@731Woodworks

2 жыл бұрын

lol it was the shortest straight board I had that was just the right length

@Higgiebaby

2 жыл бұрын

I was thinking the same thing. lol

Awesome video! I’ve been looking forward to this one ever since you mentioned you were planning on making a new miter station. The wing is genius!

I like it.

Very nice

I have the Crappy Tire 🇨🇦 specialty MasterCraft! Works great 🇨🇦😜🇨🇦

It's looking awesome Matt! Keep up the content! Inspiring me to up my miter saw workbench!

Ridgid 10” sliding miter, love the saw but wish the dust collection was better, it gets everywhere even when the vacuum is attached

Just bought my first saw today, 12 inch Ridgid compound miter, $90 on Marketplace 👍

@731Woodworks

6 ай бұрын

Nice 👍

I'm about to build a workbench, but I am like a lot of people and I'm working in a very small space. My workbench has to stored against the wall of the garage so the car can be parked inside. In order to maximize the top surface area of the workbench when it's away from the wall and in use, I want to add an extension. I like the way you did yours because there are no legs to trip on, but I am concerned that my extension may not remain level if any weight above 40 or 50 pounds is place on it. I will likely sit on a stool at the extension similar to a kitchen island, so I may go with legs that fold in and I'll use leveling feet to ensure that the extension remains level with the rest of the workbench. Love the content! It gives me lots of ideas!

Good tip. Also by raising your saw it makes it easier to clean under it.

I love that you felt bad for a tool so you used it. Lol I feel the same way sometimes 😂

Gorgeous. I love the walnut trim. It really sets that station off with that contrast. I love eye pleasing functionality.

@731Woodworks

2 жыл бұрын

Thanks so much!

All I do when looking at your workshop is drool!!!!! Awesome mitre station!!!!👊

@731Woodworks

2 жыл бұрын

Thanks 👍

12 inch rigid and basically all my tools are rigid from drills to my 13 inch planer except for my 14 inch bandsaw. I have just built a 12x12x12 work shop and am looking for different ways to organize it however I might leave my table saw in the garage to save on space. As always thanks for the videos eph 2:8

Looks great! I like the small drawers on top - good use of that space 👍

Matt, I have to admit the first time I saw this video, I wasn't in love with the mitersaw station. It's a great build it just didn't fit some of my needs, but I just watched the video again looking for ideas and seen how you did you top with the drawers. It's genius!!! It's just what I've been looking for. Thanks for the great idea. P.S. I'm trying to build it from 90% reclaimed materials, so I've named it my Frankinstation!! Lol

@731Woodworks

Жыл бұрын

Awesome 👏. Share a pic when you’re done. Tag me on social media if you can.

I like it

I have an 8x9 ft shed. So I know all about small spaces. Also, I use a 10" Kobalt miter saw.

Wow, Matt, that is a fantastic build and so well designed!

@731Woodworks

2 жыл бұрын

Thank you

Love to see your channel grow! you have so much talent and a beautiful message

Thanks Matt, I love the build videos. I know you say they don't get a ton of views but they're my favorites. It's appreciated

@731Woodworks

2 жыл бұрын

Glad you like them! Thanks Rob!

Great build, Great video. I like the longer build videos. Keep up the great content.

The coolest feature I like best, the walnut trim LOL, or the drop down extension for space saving, Looks great man, nice job

Have you ever made a king size bed? PS> with drawers underneath of it? Thank you for your videos. Praise the Lord!

My current miter saw is an old Rigid non-sliding 10" compound saw. Your miter station looks great. My favorite part of it is that there is plenty of storage since that is the one area my shop is drastically lacking in.

Nice build. Making the sides higher than the bed of the miter saw also allows you to make a zero-clearance auxiliary base/fence for the saw. Those are really useful for cutting smaller parts and reducing tearout.

@731Woodworks, you need to get the Dewalt right angle attachment that has the flexible extension piece. Check it out it’s model # is DWAMRASET . They sell it at home depot & it’s a major upgrade from the one you used in this video trust me!

Theres always things I wish I had done differently, usually realized shortly after completing the project lol. Those kind of details are the real "experience" imo. It makes you aware of potential issues the next time you build something new.

you should make a challenge coin rack or display case for challenge coins! maybe even hang in shop for viewers to send in and view in background of videos?

Great looking table. I like your idea about making your top 1/2" taller in case you change saws. This happened to me when I went from a Craftsman to my Metabo...

I have had the same mitre saw for about 3 weeks and i do not regret buying it. Such a great tool!

@731Woodworks

2 жыл бұрын

Awesome

@stephensayers4998

2 жыл бұрын

@@731Woodworks mitre station turned out awesome buddy!

Thank you for sharing those little frustrations and mistakes! It's too easy to get frustrated thinking you're the only one who drops and inch on the occasional cut. Love the content on your channel.

Beauty build video! 😉 What a great looking piece of shop furniture!

Wonderful build. There's actually not one thing i like more than the other. Love the entire build. Thanks for sharing.

@731Woodworks

2 жыл бұрын

Thanks a bunch!

Someday I will upgrade my miter saw, but for now I'm still using a 12" Delta shop master.

Loving the good word on your shirt! Great job with the workbench and the collapse-able wing extension.

12 in Bosch Sliding Miter saw is what I have in my shop. Always enjoy your videos they have been inspirational. Thanks for all the hard work.

@731Woodworks

2 жыл бұрын

Thank you

Looks amazing I am wondering I plan to get the Dewalt 12in 15 imp where the slides come out the back will this stand have enough clearance on the back side or do I just space it out from the wall a little?

Thanks for this video, Matt! I always enjoy watching you. I've been wanting to build this very thing. But I really want to thank you for the Greatest Free Gift! I watched it, I enjoyed it and I shared it. Everyone should watch it! Thanks so much! God Bless You!

@731Woodworks

2 жыл бұрын

Thank you

Great build Matt, love it all 💫

@731Woodworks

2 жыл бұрын

Thank you

Love this build! I love how you can get the plan for this build then watch this if you have any questions. Nice! Keep it up my man!

@731Woodworks

2 жыл бұрын

Thank you!