Read the full step-by-step instructions and wiring diagrams here: guitargearfinder.com/guides/build-klon-centaur-clone-kit/ Check out the guide to learn more about all of the components used, common problems you might encounter, and best practices when building guitar pedals.

@LittleRapGuy

3 жыл бұрын

awesome

@elliottnunez1057

3 жыл бұрын

Great video..Easy to understand you explained everything just right! Made me understand it with ease. Now actually DOING it is another story

@wmoecke

2 жыл бұрын

I've just bought this very kit from their Aliexpress store after your video. Did you see they've got a "deluxe" of sorts version, that mimics absolutely *everything* the original had, down to the components' make and models? Of course, that one's way more expensive.

@danielmiller2886

Жыл бұрын

@@wmoecke So how does it sound?

I bought this kit on Wish for $21.74 10 days ago and it showed up today. I received no instruction sheet but found this video. Can't thank you enough for posting this video.

@Stillkickingarse

6 ай бұрын

Same here... no instruction.

@matejhegedus7940

6 ай бұрын

Could you post a link here?

@4brewman

4 ай бұрын

Mine had a picture guide. Was OK, but the input jack wiring was not clear.

I would also recommend testing the resister values as you're building. Some may be mislabeled or faulty, so checking with a multimeter as you go could save you a big headache later on.

@barnabywilde374

2 жыл бұрын

not to mention the colors they use today where i swear the REDs are ORANGE and vice-versa. I know it couldn't be my aging eyesight...

@anatloydirtymad1775

2 жыл бұрын

99% of the resistors can be testing without desoldering. right on the pcb.

@irvan36mm

2 жыл бұрын

Good tip👍

Hands down one of the best videos for assembling a pedal. This got me wanting to try it. Great job! 👍

@AaronMatthies

3 жыл бұрын

Thanks for the kind words. I was a bit lost when I first started building pedals, so I created this video to help anybody thinking about getting into it. I have a few more tutorials in progress including other clones as well as simple pedals suitable for first-timers.

Followed your guide and it worked perfectly. My first pedal kit. Thank you!

One of the best, wait, the best video for pedals ever posted! Well done and THANK YOU!!!!!!!

This video and website made my build so easy. Your explanations and tips are spot on, thank you!

Wish I’d seen this before I built mine! 5 hours later....bloody photocopied instructions! Nice video 🤗

This - along with the step-by-step - is really helpful! I got the courage to try it now, thanks!

Fantastic video! Thanks for posting, Aaron!

Top notch, grade A instructions! Bravo.

Great video, thanks for doing this. Gives me the confidence to try this out. Cheers,

Thank you for the wiring diagram. Helped with diagnosing non working problem.

top-notch video!

Best setup video I've seen so far! I lost the instructions from my kit so I'm hoping this will work. Thank you!

Really good video thanks for that

I’m impressed.Thanks for the spoon fed version!

Thanks so much for your informative video. With your help, I just put together my first Klon clone! THANX!!!

Wow this was so helpful, thank you for this

thanks bloke I did one too and I used your guidance, THANKS!

Wow great video. I love this kinda educational content. And you make it very accessible!

Amazing video. I know it’s a year old, but this klon pedal is classic and this video could help generations of people. Such a great job with your step by step Klon instructions.

Followed this guide and nailed it perfectly the first time. Thanks for putting this together!

@AaronMatthies

3 жыл бұрын

Well done, I'm glad it helped. Enjoy your pedal!

this is hilarious, looking through effect pedal design videos and had this recommended. i have this exact clone kit sitting in a drawer. just gave me the push to build it. good stuff brother.

Excellent video as many others have also said. Lots of great tips!

Very nice video.. having your site available is an added bonus

Thanks for the video. The information you provided helped me troubleshoot a few errors I made because of the poor instructions. Thanks!

Thanks for posting this video up. I used it to double check my work. I had no issues the pedal fired up the first try.

Awesome video. Thank you!

Great video mate, subscribed

Fantastic video!

Fantastic video. website instructions and wow, what a great pedal. Thank you for your efforts to help others

What a wonderful interesting video thoroughly enjoyed it

Thanks for posting this. Along with this video and a couple of how to solder tutorials, I've just learnt how to solder and built my first pedal. It took me a while to complete but it worked first go. Thank you.

you helped me a lot, thanks!

These ttone kits are awesome!

Mine came with absolutely no intructions and your video helped a lot. THANK YOU!!

What a great video Aaron! You have a really good voice and delivery.

@AaronMatthies

3 жыл бұрын

Thanks for the kind words!

Great video. Thanks so much! Cheers mate!

working on it now, thankyou so much for the detailed info,without your help I shudder to think where I'd be at. Good on ya Aaron

I just finished mine today. I'm new to building and got it all working perfect. Stoked!

@AaronMatthies

3 жыл бұрын

Nice work! That's quite an achievement to have your pedal working on the first go, so well done. Enjoy your pedal.

Thanks for this! I followed your web page build guide and it worked perfectly on the first try.

@AaronMatthies

3 жыл бұрын

Great to hear! It's rare for a pedal build to work on the first try, so well done!

Thanks!! My kit didn't have any instructions whatever, not even the black and white drawing. Your page made it workable!

I just built this same pedal and your video and website, helped a lot. Thanks for this!

@AaronMatthies

3 жыл бұрын

Great to hear! Enjoy your pedal.

I just bought my first pedal kit! thanks for this!

@AaronMatthies

3 жыл бұрын

Nice! I hope you enjoy it. Take your time with soldering and checking your work as you go. It's common to have issues when testing a pedal, so don't let it frustrate you if it doesn't work 100% on the first attempt. Have fun!

Great video ! I will build me one and follow this vid ! Thanks 🙏

@AaronMatthies

3 жыл бұрын

Good luck! Check out the guide on my website for more tips and advice on building the pedal.

Awesome 🤩

Excellent

Sounds good!

Hey, I just want to thank you for this video (and the website tutorial)! I was able to complete this kit with ZERO problems thanks to your guidance!

@AaronMatthies

Жыл бұрын

Great to hear! I'm glad you found the video and guide helpful. Enjoy your pedal!

Awesome. I was thinking in building a pedal and then suddenly KZread recomended this video

Just got mine together! Thanks for the video and webpage. Wouldn't have been able to do it with the instructions that came with it. Sounds awesome with my SG!

@AaronMatthies

3 жыл бұрын

Glad it helped! The instructions that came with the kit were awful, so I'm glad you found my tutorial useful.

Had a blast with the build and the video helped a ton! Two of the wires were swapped to the output jack but other then that this helped a ton. Thanks!

@AaronMatthies

2 жыл бұрын

Glad it helped! Enjoy your pedal.

Well done video and it looks like a quality kit. I've never done a pedal before, but years ago I used to do Heathkits, and then in grad school I designed my own circuits and boards for digital control in an engine lab. So this should be within my skill level.

@gilmarriner3011

3 жыл бұрын

Ahhhh, Heathkit! I remember them ;)))

I don't play well enough to buy a bunch of different pedal but I enjoy watching these types of videos for my son because he is a worship guitarists and uses pedals . this pedals sounds really nice even through what you called a low quality recording.

After looking at the instructions and realizing that was not gonna happen… I stumbled across this video. Probably one of the best step-by-step tutorials I’ve seen on just about any subject. Took me a couple of days, but that was because this was a first for me and I went incredibly slowly step-by-step. The hardest part for me was really identifying the resistors. While they were “labled“, the writing was really illegible and the brown bands were indistinguishable from the red bands. Anyway I was finally able to sort them out correctly. After installing the battery and plugging into the output jack no light turned on so I was bummed that I had done something wrong, until yeah yeah yeah I saw your step about pressing the toggle switch and voila we had light! Sounds great really excited about this new pedal. Great video.

Thank you for the video. My clone build had issues and after watching your video and using the pictures on the webpage I was able to resolve the problems! The provided instructions were not good, as you pointed out, and you totally made up for them!!

@AaronMatthies

2 жыл бұрын

Thanks I'm glad the video and guide helped! Enjoy your pedal.

I love pedal buid vids... please do more

to my astounishment everything seems to work like a charm! my first guitar pedal build! Thanks for the great walkthrough, wouldn't have made it without it. i had different looking capacitors for 27N and 2N2 (brown ones, one had something like F57222J written on it for 2N2) and grey 1U capacitors instead of blue

@AaronMatthies

3 жыл бұрын

That's great to hear! It's always a nervous time when you try to test a pedal after building it so I'm glad to hear it worked for you. Glad my walkthrough helped.

Awesome tutorial 😃👍. I also went through your instructions. They're great too! I might pull the trigger on one of these 🤔

Thank you making this video, Aaron! My pedal was turning on but I wasn't getting any sound coming through the it. This was because the photo copied wiring diagram from the manufacturer was very difficult to read. Thanks to your video, I was able to check my work and determine that I wired the input jack with the opposite wires. That should do the trick! Appreciate your help greatly.

@AaronMatthies

3 жыл бұрын

Glad it helped! That wiring diagram was horrible to use, so I'm glad you solved the issue with my video. Enjoy your pedal and thanks for your comment.

Pretty cool!

I need to get me this!

Well, wish i could post a pic, just spent the last few hours watching, re-watching, pouring over your instructions, measuring resistors, making a couple of mistakes (im not finished yet), making my own little progress documentation with pics and everything, and am pretty thankful for this video, your website, your instructions, as well as the fact that my Landtone one came with "improved" instructions from yours (they could definitely improve them more), but its a pretty significant upgrade to your black and white sheet of paper. Anyway, a heap of thanks and will comment once i have mine up and running this week!!

@AaronMatthies

2 жыл бұрын

Glad to hear you've found this video and the website helpful. It's also good to hear that they've finally started sending out decent instruction sheets compared to what I received! Enjoy your pedal once you finish it.

You make it look so easy. Think I'll start with a treble booster though! Many thanks for the video.

@AaronMatthies

Жыл бұрын

Good idea. A simple booster or fuzz pedal is a great way to learn the basics and much easier to troubleshoot if it doesn't work properly. Check out my other video '7 minute fuzz' for another simple build. Good luck with your booster build!

Looks pretty simple

I have just built my first pedal and although I am not a native English speaker I had no problems following your instructions. It sounds amazing. Thank you

@AaronMatthies

2 жыл бұрын

Glad it helped! Enjoy your pedal.

Thanks heaps for this. I have the exact kit in this vid. (mine is brushed aluminium instead of gold but identical otherwise). I've been kinda holding off on making it so this is a huge help. I'm going to follow this step by step. To a guitarist building your own Klon is like a jedi building his own light sabre - Once you've done it, your skills are complete :-)

@AaronMatthies

3 жыл бұрын

Enjoy building your pedal, young Padawan. It can get frustrating at times (especially if it doesn't work perfectly on the first go), but it's definitely worth it.

I just got mine to work today. Some lessons I learned - watch capacitor orientation. I was building this when I was dead tired, put one of the caps in reverse. Lucky it didn't explode on me. I also assumed that both of the 1072 ICs were oriented the same way, with pin 1 left. Not so. I got the cap desoldered and reinstalled, turned the IC around and it worked! The 7066 IC had been getting very hot, and didn't after these changes. I thought I had a bad chip and ordered replacements off Amazon, but the replacement got hot, too. I did have to repair pin 3 of the 7066 IC after accidently bending it, and on unbending the leg snapped off. Used 22 ga wire to replace the missing part of it. Sounds great, looking forward to messing around with it.

Thanks for this video. I got the exact same kit from Aliexpress and some of the components were labelled incorrectly. Your guide helped me work it all out and now I have a Klon clone! It sounds absolutely magnificent, too

@AaronMatthies

Жыл бұрын

Glad to hear it helped, enjoy your Klon clone!

Thanks for making this tutorial because it really saved me from throwing my Klon clone away. I followed the crappy instructions that came with the clone and it didn’t work. I found your video after a quick search and after watching the video and going to your site, I found the mistakes made. The switch was not right, the input and output were not right either and after I followed your steps, my Klon Centaur clone works like a champ and it does make a difference once you set the gain and output past halfway. The overdrive really kicks in! Your video and instructions rock my friend! Cheers from Albuquerque, New Mexico; USA!

@AaronMatthies

2 жыл бұрын

That's great to hear. I'm glad my video and guide on the website helped. Enjoy your pedal!

Thank you so much for this tutorial! I got a kit about a month ago and couldnt manage to put it together properly because of the poor instructions. Today i stumbled across your video and it helped show me my errors and i corrected them. You saved me the pain of wasting 50 bucks lol

@AaronMatthies

Жыл бұрын

Glad to hear it was helpful. Enjoy your pedal!

I just wanted to say thanks! This past weekend, I successfully finished my Klon pedal, it plays, no hum, sounds great! I do think I have some problems (mainly, my volume knob gets insanely loud), and I overall, I feel like my pedal is more of a fuzz pedal than a Klon. BUT STILL. It sounds clean, it's amazing and I could not have done it without your instructions. Thanks 10000 times!

@AaronMatthies

3 жыл бұрын

Great to hear the video helped! Enjoy your pedal!

Thanks for this video and the webpage. I just finished assembling a kit like this one, and your video and page were a big help. I'm a tech, so I also used a schematic to ring down the circuit. My kit was 100% faithful to the Klon circuit, but there were a couple of flaws that had to be corrected. The silkscreen on my board had the feedback and output resistors swapped, and the zener diode cathode wasn't connected to anything at all, just a through-hole holding it down. I also made a slight mod to the LED connection so that I could remove the board without desoldering the LED leads. It sounds great, thanks again!

Thanks for the help with assembling Aaron!! This would have been a nightmare without your help! Even still, mine has some really weird clipping/phasing going on. Everything looks right except for different a couple of different capacitors they sent (but it was easy to figure out with how they were stamped). Time to search for their tech support! Hahahaha!

Just started my klon build. I unfortunately burned up a resistor. Had to order another one. Should be here in a few days. I can't wait to finish it.

Thank you Aaron for doing all this work. its a great kit, and if i had followed your instructions better i would have built it and it would have worked first time (I got the IC's in the wrong places, and it took me 2.5 hours to troubleshoot). the Wish kit is very comprehensive, down to the pre-cut and tinned wires, and the fully marked resistors and other components.

You rock

The only kits I have been able to find are like $175-$200 so I would probably just buy a clone already built but this video is so very cool and I have some DOA pedals I may want to go through and check solder points etc.

Never built a pedal yet, but with great videos like this it's becoming very tempting to try. I know its going to be a steep learning curve but what good hobby isn't? I look forward to having a go someday.

@AaronMatthies

Жыл бұрын

If a pedal like this seems a bit too much right now, check out my other video '7 Minute Fuzz Pedal' to see an example of a very simple build. A lot of fuzz and drive pedals are surprisingly basic to build.

@TheMetal750

Жыл бұрын

@@AaronMatthies hell yeah thankyou I will. You make it look too easy haha. I'm sure it tricky, but with enough patience and attention I'm sure I'll have a good go.

One of the few landtone kits that are not garbage

Awesome tutorial! I got my pedal right the first time after 6 hours of work thanks to this video! Unfortunately, the other day I had my 9v brick power transformer go crazy, so it “fried” my pedal. Does anyone know which part(s) may have been effected? Could I troubleshoot or replace parts? I guess I’m having a hard time finding which parts in the pedal would have bore the brunt of an electrical power surge.

THIS is a video! (channeling Croc Dundee 🔪) Not only do you learn how to build the Klon kit, you learn what an excellent KZread presentation looks like.

Hi Aaron! I want to thank you for your work. Yesterday I’ve successfuly soldered my first Klon (my second soldering in life so far) using your web instructions. It works and sounds good, so now I’m going to test it. It was a job, but it worths that! Also thanks for the course on pedals - it’s great for starters. After some lessons I started to understand many things. Keep doing! Good luck! Denis

@AaronMatthies

3 жыл бұрын

Thank you very much for the kind words and thanks for buying the course and supporting my site! Great job building your Klon, enjoy it.

Just built the kit. Your detailed guidance really helped with some tricky bits. Latest kit comes with colour photos which is better. Best points from your guidance pdf are: capacitors are a tight fit; orientation and connection of I/O and power connectors and connection of switch. Everything went smoothly so many thanks.

@AaronMatthies

2 жыл бұрын

Great to hear! Glad you found the guide helpful. Enjoy your pedal

@glennsophie3235

2 жыл бұрын

@@AaronMatthies love the pedal. I forgot to say that without your video and notes I would never have taken it on. So many thanks

Great video! I like that you pointed out that the locating tabs on the pots need to be clipped and filed. I have four pre-assembled Klones from China and all of them had the tabs on the pots still. Clipping and filing them will make them sit properly in the chassis and avoid damaging them when securing the nuts, however the board will sit lower in the chassis and the LED height may need to be adjusted. Also, the pre-built green pc board hand wired units that look like this kit have 7/16" holes for the 3/8" jacks. If the jacks are tightened too tight it can literally pull the threaded collar out of the jack. I highly recommend some better quality jacks, like Switchcraft #12B TRS jacks and internal tooth star washers to keep them in place. That may well be the weakest link in the Klones I have found. In fact, the black board pc mounted jack units have their own issues, not the least of which is the jacks do not have support washers to fill the gap between them and the chassis. This can also damage the jacks & chassis if the nuts are secured too tightly. Building a kit like this has the advantage of allowing the builder to address these issues as they are building it. Plus it's a great feeling to put a kit like this together and then play through it. The clear shots of the pc board were a big plus for me. It will help me identify the components in mine for some possible tone-tweaking. Thanks!

@AaronMatthies

Жыл бұрын

Thanks for sharing those tips!

Just put mine together, Has a almost identical layout slight revision of the board... The peddle worked on first power up (worked as in passed signal in both modes of operation) first kit build done in decades. Now comes the fault finding! or use it as is, one of my best fails (home built fuzz) not based of anything built on strip board version one instant die-back of each note chord played with nasty distortion kept that one its fun to use the second works fine. So getting back to works even a broken peddle that does something different may be better than the one of the production line that just works as labeled... Have yet to have a real play with it.

Fantastic tutorial matey, thank you very much for posting this! I managed to get mine together and it's all working fine except the treble control doesn't seem to do anything, I don't suppose you have any ideas what might cause that do you? Checked all the solder joints and they seem fine.

Just finished mine up today. Took three days working an average of an hour a day. Only issue I have is a high pitched hum that gets worse if I turn the treble all the way up and almost goes away if I turn the treble all the way down. I'll have to go back through all my solder joints and make sure I don't have any shorts. Not really sure what else it could be. Thanks for the tutorial! Update: I resoldered the pins for the treble and output pots and the hum is gone! For a clone, this thing sounds awesome! If I turn the gain on my 15 watt tuber up to just where it starts breaking up and then engage the pedal with the gain at max, it sounds richer even than my MXR Super Badass distortion pedal! Very versatile pedal. Thanks again for a great tutorial!

@AaronMatthies

3 жыл бұрын

Glad to hear you found the issue. I know how annoying it can be when a pedal doesn't work properly on the first try, so great job getting yours to work.

Hey Aaron, built this and it works. THANKS a million. The only issue I have is when I use adaptor ispot 9V when I click pedal off 1/2 my volume drops. When pedal is on it's back up to correct volume.This does not happen when I use a battery. Once again thanks for extremely informative video. Any suggestions would be appreciated.

Thank you! my build today went ok, looks like a capacitor of my was wrong, and the led doesnt turn on. The effect seems mild. Treble knob seems less effective. Probably wont bother trying to fix it. First pedal ever, and havent even touched my soldering iron for 5 or 6 years.

I spent today at work looking on amazon at klones and saw a DIY kit.. Was considering it, but the reviews we're filled with people saying "don't buy if beginner". Was kind of throwing me off of it, but it crossed my mind to check youtube to see if there was someone like you that made your video showing off basically how easy it was and a step by step guide. Tbh, from watching this, it seems like it would be fun to build even if I'm new to the whole pedal building - and the end result sounds nice! :)

@AaronMatthies

3 жыл бұрын

On my website, I have a few tutorials that explains pedal building for beginners. One talks about all the equipment and basic steps to building you might find interesting. There are a couple of tutorials walking through building simpler pedals than this one, so if you feel this might be a big much as your first build, check out those other builds. The hardest part for a beginner is soldering, so if you spend some time practicing that skill, you'll find it easier when you try building a pedal. Have fun!

@TRNFloyd

3 жыл бұрын

@@AaronMatthies My experience with soldering so far is installing pickups into a few of my guitars, Maybe like 5 or 6 or so pickups total, two of which had the gibson wrap for the ground wire. That guitar being my fav to play. So I've got a small amount of experience, but I'm not like thrown off by it being complex or anything. :P I did check the site out after watching the video though. Will probably go back there too for a refresher later when I actually find a kit to buy and go at it.

@floydhuntermusic2075

3 жыл бұрын

@@AaronMatthies So I did get the pedal, it came a couple days ago, and put it together last night. Did a little test recording in Reaper today and threw it up here. Your video was the perfect thing required for someone new to this wanting to get into it. Followed along to the video, and about 6h later I was done. Only thing was the kit I ordered had two different parts. I had two additional ceramic capacitors where you had yellow boxed ones. Also I had to guess where they went for the most part. It was kind of easy to figure out though based off how everything else is named and matched up. That and the blue cylinder capacitors you had, I had about 7 grey ones. Other than that, everything was the same. I can open it up and show you if you're curious, but yeah. This has made me want to get more DIY stuff. It took a long time for the parts to come, but it was worth it imo and it sounds awesome! :)

This is awesome-best build instruction video I’ve seen. I’m all about doing this... do you have a link to where I can buy this exact kit? Did I miss it in the description? Thanks!!! - Jason

@AaronMatthies

3 жыл бұрын

Thanks for your feedback. The link to the same kit is in the guide on my website: guitargearfinder.com/guides/build-klon-centaur-clone-kit/

using that blue tack to hold the board in place looks like a brilliant solution - i'll have to try that

The instructions in your build guide gave me what I needed to complete the project. I am specifically referring to the photos with the added numbers clearly showing the solder connections on the power jack, the In and Out jacks and the push button switch. The printed instruction sheet sent with the kit in 2022 is now in color but it is still lacking in clarity. I watched your vid and used your guide throughout the build.

@AaronMatthies

2 жыл бұрын

Glad you found my guide and numbered photos helpful! Enjoy your pedal.

The pcb of this kit has 2 errors (at least). The (-) side of the second from the left 47uF electrolytic capacitor and the (+) of the 12 V diode are not connected anywhere but they should be connected to the ground. The diode is for protection so it won't affect the sound but the 47uF cap affects the bias and thus the sound a bit. They are both easy correct by connecting to nearby ground connections.

I really want to try one of these kits. I just wish the kit's enclosure have the pinched corners like on the real klon.

Isn't KZread brilliant?! I've got the exact same kit from the same place. I built one of their compressor pedals as my first kit and it works fine. Your video answers the questions I have before starting on the Klon. I agree the instructions are pretty shocking. Thanks for this, I can get going now with a lot more confidence.

Awesome video.. Thanks so much! I got tripped up with my build at the footswtich like you mentioned. Got that sorted and it now passes signal, but the output is super low! Would you have any ideas why with would be? Had a bit of trouble with the 4001 diodes, so may have overheated them if that matters?

I had it working after i realized the input jack was wired wrong. Tried it out was so excited. Then had to re wire the led and not sure what happened, but plugged it in and one of the black capacitors started smoking and burnt up.... Oh ordered another one for another shot