Join this channel to get access to perks: / @ydbt4life
Жүктеу.....
Пікірлер: 143
@alexalcazar7169 Жыл бұрын
Next, how to maintain a shiny dome!
@brandonjacobo4965
Жыл бұрын
🤣🤣
@V8dadmartin
Жыл бұрын
I usually keep a Milwaukee polisher in my cabinet
@JoJoHakusho_
Жыл бұрын
I need this kinda tip lol
@canislupus5.089 Жыл бұрын
Great stuff, looking forward to gen 1 boosted
@Fahad911 Жыл бұрын
We need a Best mod Na for f150 Gen 1 5.0 🙏🏻
@joejackson9172 Жыл бұрын
You younger guys pay attention to these videos. They're a gift I promise you. I'm older and back in the day, we never had someone with practical experience simply lay things out for us as well as Alex is doing here for you Coyote guys. Thumbs up.
@fgj8379 Жыл бұрын
Another great video. I'm waiting for the Gen 3 manual video, myself. But I do enjoy learning how each generation can be improved based on it's specific potential.
@Fbothoughtofmind Жыл бұрын
I liked the calming music in the back not too loud can still hear you spittin fax
@mustbefast9923 Жыл бұрын
Keep them comming Alex!! Very good info, waiting on gen2 tutorials!
@rubblemadden Жыл бұрын
Definitely keep this going, I'm here for the gen 3 but enjoying what it takes for the other years. 💪🏾💪🏾
@carfriendly. Жыл бұрын
Keep up the great videos, school is in session! I’m personally waiting for Gen 2 6R80 and Gen 3 10R80. I would like to thank you, Alex for taking time out of your busy schedule to put this series of videos together. I hope you had a great weekend and Memorial Day!
@djderkey Жыл бұрын
Keep these coming bro they’re awesome. I can’t wait for the gen 3 to see what my options are after e85,ambient air intake and ffe on my pp1 2020 auto. I know it’s only an auto but it’s already way faster than my old sn95 5.0 with a bunch of boltons and juice. Thanks for all the great info you’ve been doling out on ur videos.
@jmanxoom Жыл бұрын
I'm getting back into hotrodding, getting the v6 stang coyote swapped. This was gold, thank you sir.
@LOAIVTC Жыл бұрын
Really like the simple way of laying information , keep it up king
@dejay422 Жыл бұрын
I followed these steps on my Gen 1 6R80 car and then put a vortech on it and I absolutely love it Love the vids, knowledge and suggestions that come from you Alex keep it up brother !!
@CALISPEC1 Жыл бұрын
I’m really liking this “Build Series” 👍
@02autogt Жыл бұрын
Managed several 10.90's @124 at SGMP in my 14' in good air. DA usually hovered around sea level or just below and water grains were typically low 20's to get it there, low water grains were my main concern. Car is a base 300A and was on 93 with factory interior. Race weight (same at all times) was 3540lbs. I had a 5C but always thought it needed more. The Boss was my intake of choice.
@lifeonmars03 Жыл бұрын
These videos are great for people who are too lazy to go back & look at your other videos. Much appreciated I'm sure. Back when I was NA in my14 gen 1, I had a ported boss intake, full suspension, pilot sports, borla headers, borla catback & X pipe. Air aid intake, injectors & a tune by you. Very stout & fun ride. I added a paxton with a 3.6 & other support mods a couple years ago. Been a super fun & reliable car still but I'm going to sell it & buy a zo6 c6 this summer. Super informative!
@dylanmiller8661 Жыл бұрын
Looking forward to Gen2 6r80. I know you have a video series going over this. But I enjoyed that series as well.
@aaronkowalewski659 Жыл бұрын
Awesome video! Thanks for the great info!! I love learning about this stuff!
@akbarroosevelt2246 Жыл бұрын
Love this series and I'm a dodge diesel owner with no interest in ever owning a Ford!! Keep up the hustle
@alickbawldin5834 Жыл бұрын
Great vid. Keeps it simple and direct like anyways. Can't wait for the Gen 3 vid.
@joemendoza2014 Жыл бұрын
Love the video! I went with a 6f cause of your red car. It works nice with a transbrake and a good surface! 3.15 plan on switching to 3.55
@superscort57 Жыл бұрын
Great stuff Alex. I ran a gt350 mani on my 13gt. 3c and mods u suggested car ran great. Best was 11 4 @120 1800ft da. Then went tvs and wished I stayed NA
@prodbybigl Жыл бұрын
Great video once again definitely keep them coming!!!
@downhilldaddy5282 Жыл бұрын
Love this series! 💪🏾
@ronaldosarantes6802 Жыл бұрын
Thanks for the information. Great video 👍
@fidelella6549 Жыл бұрын
Alex, I love these videos. Keep them coming bro
@Acekid187 Жыл бұрын
This series is amazing. I'm waiting for gen3 10r80
@mitchelfagan387110 ай бұрын
Great info! Need all this kind on stuff I can get. Thanks!!
@billechols7136 Жыл бұрын
These videos are excellent sir.
@shanebeard2967 ай бұрын
Awesome video, thanks Alex!
@MrHustle825 ай бұрын
Good revisit for the Gen 1
@cjmoore72404 ай бұрын
As always thank you for your informative video. I live in California and the emission nanny guys are very nosey when it comes to mods, especially the Mustangs. So I am now living vicariously through you. However, my 2013 Mustang GT with the Track Pack is a manual. KEEP ON ROCKING!
@chadwalker50 Жыл бұрын
Great stuff, keep it coming!
@frenchiemama80083 ай бұрын
Great video. I like your videos.
@OSIS909 Жыл бұрын
Talking from experience here ‼️ and I have countless street racing videos to prove me gapping gen2-3 yotes, 8&10 speed maros and more with my 2013 GEN1 I ran 10.8 Lund Tune , 3.73 gears , Cobra jet Mani w monoblade TB, Pmas cai, e85 , 4C stall , stage 3 NA cams. I later started to run C85 & got optic armor front and rear lexan windshield, Kirky seat, strange racing front rotor & calipers , fatHouse fab lightweight battery so I’m sure with the weight I saved it was faster then my PB 10.8 . Yes I had stuff Alex just said wasn’t necessary like a 1 piece driveshaft , suspension all the way from front to rear tubular members. Getting a gen1 coyote into the 10s is easy but expensive ur better off going boost I learned that the hard way . Ended up going twin turbo .
@laithanas4434 Жыл бұрын
Keep on the great content !!🔥
@tommyjohn312 Жыл бұрын
I can’t wait to see more of these
@ReyesBuilt Жыл бұрын
Awesome series !
@beto5.020 Жыл бұрын
Keep it coming bro great information 👌 👍 💯
@rayjay8322 Жыл бұрын
For the money and effort, rear suspension mods provide a very nice improvement and should be included in the high zoot 10 second set up. That's for N/A. Any positive displacement supercharging, I think it's mandatory to have rear suspension mods.
@cyclonekevin6199 Жыл бұрын
12.80’s not bad for just a tune. Great video.
@frankweaver8045 Жыл бұрын
I like this content i’m learning a lot
@razerginn6 күн бұрын
Get rid of the stock 235 tires Alex, thats the first mod. You're in 12s. A boss 302, e85 tune, weld racing wheels, skinnies up front, 305 out back, runs 11.9 under 500 DA. BTW circle D said a 3c or 4d converter gets you .3-.4 time reduction
@CoyoteCarroll Жыл бұрын
My car on street tires, powerlab tune, full exhaust, CAI, an 4.10 gears ran 7.7 @92 in 1/8th
@3SevenStangVids8 ай бұрын
I did 12.1 with just a tune Or/X in my 6r80 GT in 1000 ish DA on a stock converter. The 6r80 torque converter is the biggest setback when trying to go faster
@coyotefury Жыл бұрын
Very nice outline sir 👍
@dropoutdrivez2667 Жыл бұрын
Great vid tio Alex. Gt350 setups would be a nice vid 🔥
@jtokidjb Жыл бұрын
Keep them coming!
@Adam_S281 Жыл бұрын
What a gift Alex has been to the coyote world
@johnjerrigo567 Жыл бұрын
Alex, am loving this type/style videos. Can you do a Gen 1 boosted 6r80 video??
@chadpittman7826 Жыл бұрын
Awesome content Alex 👍
@KakinoHorsepower Жыл бұрын
Cookie cutter no bullchit!! Love it
@pneffie5517 Жыл бұрын
I was looking for videos like this to hopefully soon put a coyote in my foxbody. Low and behold Alex got me covered.
@j-n-texas1907 Жыл бұрын
Waiting for the gen 1 tvs recommendation. Like what you're doing.
@jdswag5436 Жыл бұрын
👌👌 nice info.. keep them rolling
@o_2a Жыл бұрын
Keep the videos going 👍
@Fauxbra Жыл бұрын
11.32@120 n/a with my 2013GT . Ported Boss IM, Airaid CAI, catless Xpipe, Kooks shorties, Circle D 4c, 4.10 gear, and a drag pack on 93.
@9SecondStreetMustang
Жыл бұрын
What gear did you cross the finish line in with 4.10’s, fifth?
@midnight347
Жыл бұрын
They did lots of testing with these cars and they didn't run any quicker with 4.10 they do better with 3.15, 3.31 or 3.55 max. The Trans itself had a 4.17 first gear for God's sake. A converter is all it needs.
@Fauxbra
Жыл бұрын
@@9SecondStreetMustang 4th gear, around 7k.
@jmendozas197 Жыл бұрын
Nice video, Alex. Gen1 boosted next, please 🙏 My goal is 9s soon, then eventually 8s.
@ChardDavis Жыл бұрын
Keep em coming
@anthony1129 Жыл бұрын
RIP in peace Jean Grey
@davewallendal5954 Жыл бұрын
Been following you for years and learning a ton. I have a 17 GT manual, and will patiently await your gen 2 N/A advice. Already went 12.6@116 all stock w/3.31 gear, would like to make a solid 11 sec street car. Waiting to see your recommendations.
@midnight347
Жыл бұрын
Basically the same things that apply to gen 1 manual applies to gen 2. Gen 2 will make more power fbo and manifold etc but they are little harder to launch with irs and slightly heavier. Essentially it's gonna be the same recipe.
@Colt_10R80 Жыл бұрын
Would like to see your ideas on a high effort NA gen 3, since there are so many NA cars on the gen 3 platform and its a platform where you can actually go pretty fast NA I think it appeals to alot of people
@midnight347
Жыл бұрын
You can go fast with gen 1 and 2 na as well it's just easier with a 10 speed because of the gearing advantage and it's better setup factory but fbo cj cams on both they aren't THAT far apart in terms of potential.
@Colt_10R80
Жыл бұрын
@@midnight347 yes im aware of what the platform can do NA. He isnt going to do anything in regards to a real NA build anyway. Aside from basic boltons he js totally against NA coyote’s for some odd reason. I dont get it tbh, his gen2 was a cool NA car for awhile and his fox is a sweet ride also NA.
@ThreePedalYote Жыл бұрын
Loving these videos. What’s next? NA gen2? Or force inducted Gen 1 stuff ?
@YDBT4LIFE
Жыл бұрын
I can put it up to a vote. Probably gen 1 boosted
@romantijerina5364 Жыл бұрын
Love the videos
@ryanmasillo6996 Жыл бұрын
Most guys say stay away from the Boss manifold. Every test Ive seen shows the 18 manifold performs best.
@keovlogz7025 Жыл бұрын
Gen 2 6r80 next please 🔥
@bricehochstetler6855 Жыл бұрын
Gen 2 boosted. I currently built a 15, calimer stage 2 mt82 for my son. Roush 2.3 blower, mmr billet oil pump gears, Texas Speed long tubes, roush intake, 60 mm twin tb😒, e85 return style , dual walbro 465 ,fic 1000 injectors (only reason lund wont tune my car) suspension front: steeda drag race springs, camber plates steeda struts, bump steer Rear: steeda drag race springs, viking dual adjustable, steeda irs brace, vertical link, adjustable tow links, bushings, drive shaft shop 2200 hp rated drive shafts. I suck at driving, but I can't get that thing to hook. Running a 305/35 r 19 nitto 555 r2 in the rear. Tried to go with a 69 mm griptec pulley but can't eliminate the slip. Installed the bomber bracket and the vmp HD tensioner. Probably going to go back to the 80 mm pulley and call it a day. I have recently bought my daughter 2017 with a 6r80. Should i be worried about the oil pump gears if im staying NA on the 2017. This video is going to help immensely going forward. Thanks for all you do
@midnight347
Жыл бұрын
If you wanna hook get rid of that nitto first off, second off go with a 17x10.5 inch rear wheel with a 305/45/17 et street r on the rear. Thank me later. With a stick car bias slicks are more forgiving but drag radials are better for the street. For max et and something that is softer on suspension parts bias slicks for a stick.
@midnight347
Жыл бұрын
Oil pump gears aren't needed unless you're bouncing off the Rev limiter which you shouldn't be doing anyways imo
@bricehochstetler6855
Жыл бұрын
Thank you for the reply. I have ventura 17x10.5 and et street rs in my cart . Just need to pull the trigger
@thewolf5.0 Жыл бұрын
Great info 👍
@ps3beast17 Жыл бұрын
Great info
@jtokidjb Жыл бұрын
Love it!
@Mohammed-lg8ir Жыл бұрын
Can you do some videos about f150s especially 10r 5.0s?
@billybomba2015GT Жыл бұрын
Thanks!
@Shadow-um4yu Жыл бұрын
Please do boosted applications next (manual)
@Jlittle523 Жыл бұрын
I’m doing a peasant ass Gen 1 swap based off an F150. Refreshed 6R80, 2C or 3C converter, 3.31s or 3.55s, refreshed heads with valve job, Boss cams and Springs, stock crank, Gen 2 rods, 12:1 CR, Gen 3 Manifold, FFE, LU47s, FORE Return System, and of course Lund Tuning.
@Bigboss3O2 Жыл бұрын
Yessir good content
@rene5871 Жыл бұрын
Can you do a boosted Gen 1 guide? Thanks
@mudharbasim1414 Жыл бұрын
i did 11.8 with no convertor pmas ported 18 ported tb catless e85 weight reduction
@Nawsad1 Жыл бұрын
Dope explanation. Can we talk Gen 2 coyote's?
@adariusbaylor Жыл бұрын
Alex does a torque converter make a difference in a roll race or only in dig racing ?
@Twobarpsi Жыл бұрын
Can't wait for the Gen 2 boosted series!! Auto or manual? How much of a turd is the MT-82? Should you go with a Calimer?
@midnight347
Жыл бұрын
The mt82 holds up alot better than people give it credit for. I've seen many above 700-800 wheel boosted and staying together that isn't a walk in the park by any means.
@antoniotorres1396 Жыл бұрын
These style videos are the shit
@voodooreddevil7325 Жыл бұрын
Dig it keep it up
@enflamedpapaya859210 ай бұрын
I have a gen 2 6r80 and I wanted to be in the 11s so bad. The car has pmas intake, 2018 manifold, lu47s and e85 tune. Stock exhaust manifold and cats. Made 425whp and 370tq. My tires were not good so I could only launch at like 1200 rpm. Cut a 1.9 60’, 7.9 1/8th and 12.0 at 117.5mph 1/4. Had to let out a lot on the shifts bc it kept breaking the tires loose and getting sideways. I’m thinking high 11s easy with a better tire?
@brianrowlison6080 Жыл бұрын
Great info Alex! Any advice on getting my new to me 2014 GT Gen 1 with a Circle D Pro 245mm 36-3800 vert to hook up at the track. It just annihilates the Nitto NT555RII 275x50r15s.
@YDBT4LIFE
Жыл бұрын
Listen to the video. lol it tells you what to do.
@brianrowlison6080
9 ай бұрын
Hi Alex, thanks for the reply. I had to step up to a 6C and a 3.73 to get the car to 60". Now I'm struggling with getting it in the high 11s. Is it possible with just a tune, 6c and 3.73 gear to go high 11s? My tuner is Luis Ortiz cause I have an SCT hand held. Luis says it should already be in the 11s. I want to run the Sportsman 12 sec and slower bracket class, so I'm limited on changes to the engine.
@the1withnoname4963 ай бұрын
In my personal opinion, i firmly believe gears must be one of the first mods in a 6r80 car.. it’ll wake the car up, its a night and day difference
@cesar101387 Жыл бұрын
Hell yeah!
@Smasher-Devourer Жыл бұрын
The mods would be pretty much the same for a Regular cab Gen 1 5.0 F150 as well, except you'll need mustang intake cams. The stock F150 intake cams are terrible.
@jasonhollister2412 Жыл бұрын
You say free flowing exhaust, are long tubes necessary or Offroad H sufficient enough?
@spicychickensandwich4196 Жыл бұрын
Alex the "coyote whisperer" laying down the knowledge. Hopefully all the millennials can still follow along
@Channel-jy1ui Жыл бұрын
Dope
@brianrowlison60806 ай бұрын
What brake pads are you using on the s197 to launch at 4400rpm?
@austinmcgee88916 ай бұрын
Is the ecu on the 2014 mustang gt locked I’ve been trying to figure out if I need a ecu or if I can take it straight to a dyno first time modding a car so I’m new to all this tuning stuff
@ShaunOconnell Жыл бұрын
Tune daddy ❤❤❤
@ryanroy302 ай бұрын
I've got a ngage and got the free 93 oc. And cam tune but I never Did data logging. And when I had it tuned, I didn't know. I had Catalytic convergers + I've got a air rid cold air intake tube With a cold air rausch air box and filter. And I've got a Throttle body spacer plate and since I got the tune. I went from having eighteen's to nineteen inches rims. I've got a 2018 intake I can put on it and I still plan on taking off the Catalytic converters. But how can I get a tune done for it now they don't sell them anymore. Can u do them still and how much would it be. If I had u do a tune for me if it can still be done with a ngage and should I not add the 2018 intake. It's a 2013 mustang gt automatic with the got to ger it green with glass top. It's been a dream of mine to have a 11 sec street car.
@YDBT4LIFE
2 ай бұрын
Email Lund racing with this exact same question support@lundracing.com
@ryanroy30
2 ай бұрын
I've had alot of nice cars but everything I got 1 and start getting it there something happens in my life to make me sell my car and this time me and my wife was in a fatal accident and the lady at fault didn't have any insurance and I just paid my wife's truck off for Christmas gift and to save money since we just got a house. So I took off full coverage for the winter and that happened 3 days before Christmas so we lost the truck and all the money I pulled out to pay it off a month before. Then I was run off the road a month later and Totaled my six hundred horsepower gti that would have probably ran 11s if I could have ever got it to hook up. But I was going to sell it and I was on my way home from the garage I had it in for the winter. So after losing everything but the house and we both now had to buy something to drive I got my Mustang gt that was my dream car when it came out. Then i found out i had cancer and i didnt have health insurance then covid hit and i lost my job. So i had it sold for 15 thousand dollars. And ended up going out in it 1 last time and was in a Wreck again. So I just got it back on the road. I guess it was meant for me to keep it since I only have 14 hundred dollars left I o the bank for it. But that's just a little bit of luck I have and stuff that happens to me. Anytime I get something and try to make my dream come true. But I don't have alot of money right now so. I can't afford to buy stuff for it. But I do have a few things that's changed since I had the tune done. I would at least like to get the tune right. To get it back to running good again I have waited because I wanted to do the e85 tune but I've just not had the money for the injectors and pump and then a tune. It will take me a little bit to get everything to do e85 so right now the tune being right is the cheaper thing to make a change. Sorry for long messages but just trying to find out how much it is to have a tune redone and if it can be done. And asking if I should keep stock intake or add 2018 intake when I get the tune done. Thanks for your time I hope to hear back from u.
@YDBT4LIFE
2 ай бұрын
@@ryanroy30 again Email support@lundracing.com
@PunkRockDad85 Жыл бұрын
How to build a Gen1 auto procharged mustang... I'm stuck at 11.4 i think because of the converter.. my 60' is trash but my trap speed is 125!
@jamesnj3454 Жыл бұрын
Everything is great but the background music is too loud, maybe not even needed.
@YDBT4LIFE
Жыл бұрын
Holy shit dude grow up
@3rd_gen_5.0 Жыл бұрын
what is the recipe for a on 10r80 10s low 11s 1/4 mile
Пікірлер: 143
Next, how to maintain a shiny dome!
@brandonjacobo4965
Жыл бұрын
🤣🤣
@V8dadmartin
Жыл бұрын
I usually keep a Milwaukee polisher in my cabinet
@JoJoHakusho_
Жыл бұрын
I need this kinda tip lol
Great stuff, looking forward to gen 1 boosted
We need a Best mod Na for f150 Gen 1 5.0 🙏🏻
You younger guys pay attention to these videos. They're a gift I promise you. I'm older and back in the day, we never had someone with practical experience simply lay things out for us as well as Alex is doing here for you Coyote guys. Thumbs up.
Another great video. I'm waiting for the Gen 3 manual video, myself. But I do enjoy learning how each generation can be improved based on it's specific potential.
I liked the calming music in the back not too loud can still hear you spittin fax
Keep them comming Alex!! Very good info, waiting on gen2 tutorials!
Definitely keep this going, I'm here for the gen 3 but enjoying what it takes for the other years. 💪🏾💪🏾
Keep up the great videos, school is in session! I’m personally waiting for Gen 2 6R80 and Gen 3 10R80. I would like to thank you, Alex for taking time out of your busy schedule to put this series of videos together. I hope you had a great weekend and Memorial Day!
Keep these coming bro they’re awesome. I can’t wait for the gen 3 to see what my options are after e85,ambient air intake and ffe on my pp1 2020 auto. I know it’s only an auto but it’s already way faster than my old sn95 5.0 with a bunch of boltons and juice. Thanks for all the great info you’ve been doling out on ur videos.
I'm getting back into hotrodding, getting the v6 stang coyote swapped. This was gold, thank you sir.
Really like the simple way of laying information , keep it up king
I followed these steps on my Gen 1 6R80 car and then put a vortech on it and I absolutely love it Love the vids, knowledge and suggestions that come from you Alex keep it up brother !!
I’m really liking this “Build Series” 👍
Managed several 10.90's @124 at SGMP in my 14' in good air. DA usually hovered around sea level or just below and water grains were typically low 20's to get it there, low water grains were my main concern. Car is a base 300A and was on 93 with factory interior. Race weight (same at all times) was 3540lbs. I had a 5C but always thought it needed more. The Boss was my intake of choice.
These videos are great for people who are too lazy to go back & look at your other videos. Much appreciated I'm sure. Back when I was NA in my14 gen 1, I had a ported boss intake, full suspension, pilot sports, borla headers, borla catback & X pipe. Air aid intake, injectors & a tune by you. Very stout & fun ride. I added a paxton with a 3.6 & other support mods a couple years ago. Been a super fun & reliable car still but I'm going to sell it & buy a zo6 c6 this summer. Super informative!
Looking forward to Gen2 6r80. I know you have a video series going over this. But I enjoyed that series as well.
Awesome video! Thanks for the great info!! I love learning about this stuff!
Love this series and I'm a dodge diesel owner with no interest in ever owning a Ford!! Keep up the hustle
Great vid. Keeps it simple and direct like anyways. Can't wait for the Gen 3 vid.
Love the video! I went with a 6f cause of your red car. It works nice with a transbrake and a good surface! 3.15 plan on switching to 3.55
Great stuff Alex. I ran a gt350 mani on my 13gt. 3c and mods u suggested car ran great. Best was 11 4 @120 1800ft da. Then went tvs and wished I stayed NA
Great video once again definitely keep them coming!!!
Love this series! 💪🏾
Thanks for the information. Great video 👍
Alex, I love these videos. Keep them coming bro
This series is amazing. I'm waiting for gen3 10r80
Great info! Need all this kind on stuff I can get. Thanks!!
These videos are excellent sir.
Awesome video, thanks Alex!
Good revisit for the Gen 1
As always thank you for your informative video. I live in California and the emission nanny guys are very nosey when it comes to mods, especially the Mustangs. So I am now living vicariously through you. However, my 2013 Mustang GT with the Track Pack is a manual. KEEP ON ROCKING!
Great stuff, keep it coming!
Great video. I like your videos.
Talking from experience here ‼️ and I have countless street racing videos to prove me gapping gen2-3 yotes, 8&10 speed maros and more with my 2013 GEN1 I ran 10.8 Lund Tune , 3.73 gears , Cobra jet Mani w monoblade TB, Pmas cai, e85 , 4C stall , stage 3 NA cams. I later started to run C85 & got optic armor front and rear lexan windshield, Kirky seat, strange racing front rotor & calipers , fatHouse fab lightweight battery so I’m sure with the weight I saved it was faster then my PB 10.8 . Yes I had stuff Alex just said wasn’t necessary like a 1 piece driveshaft , suspension all the way from front to rear tubular members. Getting a gen1 coyote into the 10s is easy but expensive ur better off going boost I learned that the hard way . Ended up going twin turbo .
Keep on the great content !!🔥
I can’t wait to see more of these
Awesome series !
Keep it coming bro great information 👌 👍 💯
For the money and effort, rear suspension mods provide a very nice improvement and should be included in the high zoot 10 second set up. That's for N/A. Any positive displacement supercharging, I think it's mandatory to have rear suspension mods.
12.80’s not bad for just a tune. Great video.
I like this content i’m learning a lot
Get rid of the stock 235 tires Alex, thats the first mod. You're in 12s. A boss 302, e85 tune, weld racing wheels, skinnies up front, 305 out back, runs 11.9 under 500 DA. BTW circle D said a 3c or 4d converter gets you .3-.4 time reduction
My car on street tires, powerlab tune, full exhaust, CAI, an 4.10 gears ran 7.7 @92 in 1/8th
I did 12.1 with just a tune Or/X in my 6r80 GT in 1000 ish DA on a stock converter. The 6r80 torque converter is the biggest setback when trying to go faster
Very nice outline sir 👍
Great vid tio Alex. Gt350 setups would be a nice vid 🔥
Keep them coming!
What a gift Alex has been to the coyote world
Alex, am loving this type/style videos. Can you do a Gen 1 boosted 6r80 video??
Awesome content Alex 👍
Cookie cutter no bullchit!! Love it
I was looking for videos like this to hopefully soon put a coyote in my foxbody. Low and behold Alex got me covered.
Waiting for the gen 1 tvs recommendation. Like what you're doing.
👌👌 nice info.. keep them rolling
Keep the videos going 👍
11.32@120 n/a with my 2013GT . Ported Boss IM, Airaid CAI, catless Xpipe, Kooks shorties, Circle D 4c, 4.10 gear, and a drag pack on 93.
@9SecondStreetMustang
Жыл бұрын
What gear did you cross the finish line in with 4.10’s, fifth?
@midnight347
Жыл бұрын
They did lots of testing with these cars and they didn't run any quicker with 4.10 they do better with 3.15, 3.31 or 3.55 max. The Trans itself had a 4.17 first gear for God's sake. A converter is all it needs.
@Fauxbra
Жыл бұрын
@@9SecondStreetMustang 4th gear, around 7k.
Nice video, Alex. Gen1 boosted next, please 🙏 My goal is 9s soon, then eventually 8s.
Keep em coming
RIP in peace Jean Grey
Been following you for years and learning a ton. I have a 17 GT manual, and will patiently await your gen 2 N/A advice. Already went 12.6@116 all stock w/3.31 gear, would like to make a solid 11 sec street car. Waiting to see your recommendations.
@midnight347
Жыл бұрын
Basically the same things that apply to gen 1 manual applies to gen 2. Gen 2 will make more power fbo and manifold etc but they are little harder to launch with irs and slightly heavier. Essentially it's gonna be the same recipe.
Would like to see your ideas on a high effort NA gen 3, since there are so many NA cars on the gen 3 platform and its a platform where you can actually go pretty fast NA I think it appeals to alot of people
@midnight347
Жыл бұрын
You can go fast with gen 1 and 2 na as well it's just easier with a 10 speed because of the gearing advantage and it's better setup factory but fbo cj cams on both they aren't THAT far apart in terms of potential.
@Colt_10R80
Жыл бұрын
@@midnight347 yes im aware of what the platform can do NA. He isnt going to do anything in regards to a real NA build anyway. Aside from basic boltons he js totally against NA coyote’s for some odd reason. I dont get it tbh, his gen2 was a cool NA car for awhile and his fox is a sweet ride also NA.
Loving these videos. What’s next? NA gen2? Or force inducted Gen 1 stuff ?
@YDBT4LIFE
Жыл бұрын
I can put it up to a vote. Probably gen 1 boosted
Love the videos
Most guys say stay away from the Boss manifold. Every test Ive seen shows the 18 manifold performs best.
Gen 2 6r80 next please 🔥
Gen 2 boosted. I currently built a 15, calimer stage 2 mt82 for my son. Roush 2.3 blower, mmr billet oil pump gears, Texas Speed long tubes, roush intake, 60 mm twin tb😒, e85 return style , dual walbro 465 ,fic 1000 injectors (only reason lund wont tune my car) suspension front: steeda drag race springs, camber plates steeda struts, bump steer Rear: steeda drag race springs, viking dual adjustable, steeda irs brace, vertical link, adjustable tow links, bushings, drive shaft shop 2200 hp rated drive shafts. I suck at driving, but I can't get that thing to hook. Running a 305/35 r 19 nitto 555 r2 in the rear. Tried to go with a 69 mm griptec pulley but can't eliminate the slip. Installed the bomber bracket and the vmp HD tensioner. Probably going to go back to the 80 mm pulley and call it a day. I have recently bought my daughter 2017 with a 6r80. Should i be worried about the oil pump gears if im staying NA on the 2017. This video is going to help immensely going forward. Thanks for all you do
@midnight347
Жыл бұрын
If you wanna hook get rid of that nitto first off, second off go with a 17x10.5 inch rear wheel with a 305/45/17 et street r on the rear. Thank me later. With a stick car bias slicks are more forgiving but drag radials are better for the street. For max et and something that is softer on suspension parts bias slicks for a stick.
@midnight347
Жыл бұрын
Oil pump gears aren't needed unless you're bouncing off the Rev limiter which you shouldn't be doing anyways imo
@bricehochstetler6855
Жыл бұрын
Thank you for the reply. I have ventura 17x10.5 and et street rs in my cart . Just need to pull the trigger
Great info 👍
Great info
Love it!
Can you do some videos about f150s especially 10r 5.0s?
Thanks!
Please do boosted applications next (manual)
I’m doing a peasant ass Gen 1 swap based off an F150. Refreshed 6R80, 2C or 3C converter, 3.31s or 3.55s, refreshed heads with valve job, Boss cams and Springs, stock crank, Gen 2 rods, 12:1 CR, Gen 3 Manifold, FFE, LU47s, FORE Return System, and of course Lund Tuning.
Yessir good content
Can you do a boosted Gen 1 guide? Thanks
i did 11.8 with no convertor pmas ported 18 ported tb catless e85 weight reduction
Dope explanation. Can we talk Gen 2 coyote's?
Alex does a torque converter make a difference in a roll race or only in dig racing ?
Can't wait for the Gen 2 boosted series!! Auto or manual? How much of a turd is the MT-82? Should you go with a Calimer?
@midnight347
Жыл бұрын
The mt82 holds up alot better than people give it credit for. I've seen many above 700-800 wheel boosted and staying together that isn't a walk in the park by any means.
These style videos are the shit
Dig it keep it up
I have a gen 2 6r80 and I wanted to be in the 11s so bad. The car has pmas intake, 2018 manifold, lu47s and e85 tune. Stock exhaust manifold and cats. Made 425whp and 370tq. My tires were not good so I could only launch at like 1200 rpm. Cut a 1.9 60’, 7.9 1/8th and 12.0 at 117.5mph 1/4. Had to let out a lot on the shifts bc it kept breaking the tires loose and getting sideways. I’m thinking high 11s easy with a better tire?
Great info Alex! Any advice on getting my new to me 2014 GT Gen 1 with a Circle D Pro 245mm 36-3800 vert to hook up at the track. It just annihilates the Nitto NT555RII 275x50r15s.
@YDBT4LIFE
Жыл бұрын
Listen to the video. lol it tells you what to do.
@brianrowlison6080
9 ай бұрын
Hi Alex, thanks for the reply. I had to step up to a 6C and a 3.73 to get the car to 60". Now I'm struggling with getting it in the high 11s. Is it possible with just a tune, 6c and 3.73 gear to go high 11s? My tuner is Luis Ortiz cause I have an SCT hand held. Luis says it should already be in the 11s. I want to run the Sportsman 12 sec and slower bracket class, so I'm limited on changes to the engine.
In my personal opinion, i firmly believe gears must be one of the first mods in a 6r80 car.. it’ll wake the car up, its a night and day difference
Hell yeah!
The mods would be pretty much the same for a Regular cab Gen 1 5.0 F150 as well, except you'll need mustang intake cams. The stock F150 intake cams are terrible.
You say free flowing exhaust, are long tubes necessary or Offroad H sufficient enough?
Alex the "coyote whisperer" laying down the knowledge. Hopefully all the millennials can still follow along
Dope
What brake pads are you using on the s197 to launch at 4400rpm?
Is the ecu on the 2014 mustang gt locked I’ve been trying to figure out if I need a ecu or if I can take it straight to a dyno first time modding a car so I’m new to all this tuning stuff
Tune daddy ❤❤❤
I've got a ngage and got the free 93 oc. And cam tune but I never Did data logging. And when I had it tuned, I didn't know. I had Catalytic convergers + I've got a air rid cold air intake tube With a cold air rausch air box and filter. And I've got a Throttle body spacer plate and since I got the tune. I went from having eighteen's to nineteen inches rims. I've got a 2018 intake I can put on it and I still plan on taking off the Catalytic converters. But how can I get a tune done for it now they don't sell them anymore. Can u do them still and how much would it be. If I had u do a tune for me if it can still be done with a ngage and should I not add the 2018 intake. It's a 2013 mustang gt automatic with the got to ger it green with glass top. It's been a dream of mine to have a 11 sec street car.
@YDBT4LIFE
2 ай бұрын
Email Lund racing with this exact same question support@lundracing.com
@ryanroy30
2 ай бұрын
I've had alot of nice cars but everything I got 1 and start getting it there something happens in my life to make me sell my car and this time me and my wife was in a fatal accident and the lady at fault didn't have any insurance and I just paid my wife's truck off for Christmas gift and to save money since we just got a house. So I took off full coverage for the winter and that happened 3 days before Christmas so we lost the truck and all the money I pulled out to pay it off a month before. Then I was run off the road a month later and Totaled my six hundred horsepower gti that would have probably ran 11s if I could have ever got it to hook up. But I was going to sell it and I was on my way home from the garage I had it in for the winter. So after losing everything but the house and we both now had to buy something to drive I got my Mustang gt that was my dream car when it came out. Then i found out i had cancer and i didnt have health insurance then covid hit and i lost my job. So i had it sold for 15 thousand dollars. And ended up going out in it 1 last time and was in a Wreck again. So I just got it back on the road. I guess it was meant for me to keep it since I only have 14 hundred dollars left I o the bank for it. But that's just a little bit of luck I have and stuff that happens to me. Anytime I get something and try to make my dream come true. But I don't have alot of money right now so. I can't afford to buy stuff for it. But I do have a few things that's changed since I had the tune done. I would at least like to get the tune right. To get it back to running good again I have waited because I wanted to do the e85 tune but I've just not had the money for the injectors and pump and then a tune. It will take me a little bit to get everything to do e85 so right now the tune being right is the cheaper thing to make a change. Sorry for long messages but just trying to find out how much it is to have a tune redone and if it can be done. And asking if I should keep stock intake or add 2018 intake when I get the tune done. Thanks for your time I hope to hear back from u.
@YDBT4LIFE
2 ай бұрын
@@ryanroy30 again Email support@lundracing.com
How to build a Gen1 auto procharged mustang... I'm stuck at 11.4 i think because of the converter.. my 60' is trash but my trap speed is 125!
Everything is great but the background music is too loud, maybe not even needed.
@YDBT4LIFE
Жыл бұрын
Holy shit dude grow up
what is the recipe for a on 10r80 10s low 11s 1/4 mile
Can you do a gen 2 6r80 video next
@nerbon7164
Жыл бұрын
Just look up his red car.
Mt82 gen 2
👍