🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. ☕ Help support me on Patreon -www.patreon.com/charlieDIYte (includes Discord access). 🛍 Join me on WeShop and earn shares every time you buy! - app.we.shop/join-charliewhite

Utterly inspiring and inspired, that’s you Charlie. Not afraid to fail in order to learn and to help others do the same. Long may your channel and your endeavours continue.

The poor slug didn’t know which way to go! Fantastic video Charlie. Thanks for sharing.

@CharlieDIYte

Жыл бұрын

I saw that!! 🤣

This video and all of your videos are fantastic. Really useful starting point when I'm learning. Thank you 👍

@CharlieDIYte

2 ай бұрын

Thanks. Really chuffed you find them useful.

Great video, a few points you may wish to consider for your follow up videos: 1) Guttering will prevent water splash back, so a useful addition, as a rainwater harvesting system. Raise the barrel above ground so you and use a hozelock connector or a watering can. The higher the barrel the greater the water pressure that will come out of the hose. You will be surprised at how slow it flows out of the hose as the height or head drops. 2) A shallower roof angle would allow you to raise the front entrance and stack without hitting your head on the tiles. 3) Logs ideally should be split as they will season quicker and start quicker in your log burner. 4) Logs need airflow preferably through the pile, so a system of raising the base, 2x4's, pallets, even black plastic pallets anything that allows air to get underneath and percolate through the pile. 5) The oldest most seasoned log is always at the base at the back! Dividing the store into bays would allow you to store in batches, then burn each bay in rotation starting with the oldest, so you always have a seasoned bay. 6) If the logs are split into quadrants then stacked, you will get something like 30% more into any given space. 7) A black or say say slate roof will heat up quicker than a lighter colour tile, drawing more air in from the base through the pile. I have used black bitumen roofing sheets on mine due to budget restraints. I liked your roofing explanation by the way, there's more to roofing that it apears.

@CharlieDIYte

Жыл бұрын

Thanks so much for this. Such brilliant advice. You and a few others have made me realise I need to plan the stacking very carefully, and although you've been kind about my roofing for some reason I decided not to add ridge tiles, so that'll need modifying. There will definitely need to be a second video and I'll give you a shout out for taking the time to send me all that advice. 👊

Great vid. Thanks.Two ways to easily get MOT out of the bag. 1) when it's being dropped off by the truck cut the bottom of the bag so it all goes on to the ground. Put a tarp and if you have it an old board down first. All the MOT will be loose and easy to shovel up. With the tarp its easy to clean up after you've moved it 2) Put a tarp (better with a board on top) as close to the bag as you can. Split the bag on two sides. The MOT will fall out and you can give it a helping hand with a rake or something. So easy to just shovel off the the board. Keep the vids coming. Cheers

@CharlieDIYte

Жыл бұрын

Very good point mate, thanks for sharing 👊 Slight problem is I wasn't here when it was delivered 🤣

Regarding the correct naming/joinery terms, the 90° notch you cut out of the rafters are called ‘birdsmouth joints’

@CharlieDIYte

Жыл бұрын

Ah, thanks for that 👊

Brilliant job mate, it looks great. Watched many of your diy videos for pointers on work I’ve done around the house but only just subscribed. Great channel 👍🏻

Looks really nice, great job. You’ll probably want some shelves / dividers for when you start storing wood, otherwise you can only ever take the stuff from the top

@CharlieDIYte

Жыл бұрын

Thanks Daniel. I agree, the storage needs some thought. 👍

@jerrydonnan8665

Жыл бұрын

I agree with Daniel, great job - I built one very similar at the side of my garage. I dimensioned it on 3 standard pallets, so there's air circulation below the logs too - can always replace pallets if they rot. After the first year I included dividers, so I can separate softwood from hardwood and use them at different rates. Also added mini guttering after the first year - now have no drips landing on the logs when the wind blows

excellent job, i find using a pointed shovel helps when digging your hardcore out the dumpy bag.

Be careful stacking the logs in there Charlie, if they're touching the wall you'll introduce an easy way for moisture to travel past the DPC. Either stack them so they don't touch the wall or put something on the wall to protect it, but that could also cause the same issue depending on what you use. We built free standing log stores so we didn't have to worry about it.

@CharlieDIYte

Жыл бұрын

That's a good point, thanks. I'll mull over how to get round that 👌

@richardstewart6900

Жыл бұрын

I'm thinking a good air gap between the stored wood and the wall will benefit both.

@Ben-fk9ey

Жыл бұрын

@@CharlieDIYte Ideally you want all the logs to be free standing with around an inch or enough room for a mouse between the stacks to have good airflow. Also on the topic of airflow I would have made it wide enough to use pallets as a base for the wood so you get good airflow underneath it as well. Also you don't want to cover wood too much, it's better to have wood exposed to both the rain and sun than no sun at all.

@drsquirrel00

Жыл бұрын

@@Ben-fk9ey I'd go as far as leave wood out in the summer and let it get rained on. Similar for winter if the wood wont be ready for this year. I don't know where/when/who - but drying (sap) logs in rivers was a done thing.

@DukeofDave

Жыл бұрын

@@CharlieDIYte stick a trellis on the wall

A great video Charlie, and the log store looks fab. I really like the chunky look you achieved with it and it blends in really well.

@CharlieDIYte

Жыл бұрын

Thanks, I appreciate that 👍

Excellent job Everything done to perfection 👊 Great detailed video ! Thanks for sharing

@CharlieDIYte

Жыл бұрын

Thanks. Apart from... missing the ridge tiles as someone has already pointed out. I didn't give them much thought as I think I was imagining the lead flashing would provide the requisite overlap. One for the update video...

You made a smashing job of this, well done Sir and thank you for sharing. It looks very nice .

@CharlieDIYte

Жыл бұрын

Thank you very much , really appreciate the comment 👊

Lovely log store! For the flashing I think what you’ve done is perfect

@CharlieDIYte

Жыл бұрын

Thanks. Except it needs a row of eave tiles - can't for the life of me figure out why I didn't bother with them. If the flashing was an inch or 25mm wider it wouldn't matter. Anyway now installed but I'll have to redo the flashing in the spring. There will be a second video talking about the log stacking and this point. 👍

Beautiful craftsmanship Charlie

@CharlieDIYte

Жыл бұрын

Thanks mate. 👊

That looks stunning with the tiled roof

@CharlieDIYte

Жыл бұрын

Thanks Scott 👊

Great video Charlie

@CharlieDIYte

Жыл бұрын

Thanks Giles 👊

Really slick build 🙌🏼

Cracking effort Charlie 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

@CharlieDIYte

Жыл бұрын

Thanks Kevin 👊

Fantastic build there Charlie. I like the steep pitch. It looks classy and suits those rosemarys.

@CharlieDIYte

Жыл бұрын

Thanks Paul. There is a glaring error though - I didn't install any ridge tiles, I think subconsciously thinking the flashing would cover the overlap but it hasn't quite so there's one modification I need. I think there will be a video #2 as the stacking of the wood is going to need some careful consideration too.

I used live edge boards on the side looks really nice

You want a build some sort of grid at the back to hold the logs away from the wall and allow a bit of airflow. And when you stack them don't stack too tightly - there should be enough space around the logs for a mouse to run through. You should be fine leaving the front open. As the logs dry out the grain tightens up and makes them much less prone to absorbing water so any rain tends to be on the outer surface only and dries out quickly when it stops raining.

@CharlieDIYte

Жыл бұрын

Thanks mate. Yes, I think a bit of thought needs to go into the storage...

Class build Charlie. Keep the videos coming....

@CharlieDIYte

Жыл бұрын

Thanks, will do, and thanks for the comment 👊

Excellent project Charlie, that came out looking great, you certainly challenged yourself and tried some new skills along the way, so really worth it ! If you've got any hanging around it could be worth using some cut down pallets to stack the firewood off the ground. I have some (very) basic curtains on the front of my store made from 1m wide landscaping fabric weighted down with roofing batten screwed through at the bottom. As you say this doesn't look so nice but tbh I only have it up for the worst of the autumn/winter weather when you're not out there looking at it much anyway and having a number that are 1m wide means I can tie one up for regular access leaving the others down. Consider protecting the wall from damp logs too !

Brilliant. Definitely inspiration for trying something similar

@CharlieDIYte

Жыл бұрын

Thanks. Next week's vid week be a follow up tackling an omission and log storage.

Cracking build mate 👍 I put a pallet base in my log store to allow airflow and stop the bottom layer of logs from getting wet from water splashing from the roof and any standing water. It’s ideal.

@CharlieDIYte

Жыл бұрын

Thanks buddy. Yes I need to get some pallets 👌

Great video. Really like what you’ve done.

@CharlieDIYte

Жыл бұрын

Thanks 👊

Always fun watching your videos Charlie, I can see potential issues but interesting watch.

@CharlieDIYte

Жыл бұрын

Thanks Hopefully I'll deal with most of them in video #2. 😉

Great video. I intend building a log store at my new house if all things go to plan. And will definitely be copying your design, taking into account the the things you said you might have done differently.

A very professional job indeed

@CharlieDIYte

Жыл бұрын

Thanks, except for the immigration of eave tiles. One for the update video 😉

Another great video. I love that you let people know what tools you are going to use up front and have a summary that includes what you might do differently if you were to do it again. You are lucky that you are not in North America as you aren't a fan of Robertson screw heads. The most common one is the Phillips screw head (+) followed by the flat head (-). In Canada the Robertson is more popular as the inventor was from here. There are still times when all one may get is a Phillips head screw. The only time we really see the Torx screws in Canada is with electronics.

@CharlieDIYte

Жыл бұрын

Thanks buddy and I'm very humbled my vid is reaching you guys! I was just really disappointed because the Robertson looks like such an awesome design (I was aware it came from Canada) but it seems very dependent on you having a bit trust was designed for the screws rather than a generic bit of the right size, otherwise you get a lot to camming out. Yes we still have mostly Phillips over here.

Another great video Charlie

@CharlieDIYte

Жыл бұрын

Thanks buddy 👊

Excellent video very well explained

@CharlieDIYte

Жыл бұрын

Thanks Steve.

Fantastic build.

@CharlieDIYte

Жыл бұрын

Thanks Ian 👍

Looks amazing charlie

@CharlieDIYte

Жыл бұрын

Thanks Peter 👍

I like the lessons learnt at the end of this video. I agree the roof could have been a lower pitch but I actually like the current pitch more! Thanks for the brilliant video! That expanding foam glue is amazing!

@CharlieDIYte

Жыл бұрын

Thanks, I appreciate that. I've got an update video coming out just after Christmas - showing storage, wood splitting etc so keep an eye out for that 👊

@tormenting360

Жыл бұрын

@@CharlieDIYte Will do indeed!

Great job Charlie!

@CharlieDIYte

Жыл бұрын

Thanks. Update video coming out next so keep an eye out for that. 👊

great video and cracking end result

@CharlieDIYte

Жыл бұрын

Thanks. 👍

Hi Charlie, when I made a wood store I used hit and miss on the sides to allow the air to circulate throw and dry the wood out Take care keep up the great work

@CharlieDIYte

Жыл бұрын

Thanks. Yes, maybe some little spacers to turn those feather boards into louvres 🤔

Nice construction! I used a couple of old pallets to lift up the bottom row of logs to allow more airflow.

@CharlieDIYte

Жыл бұрын

Thanks. Yes I'm so chuffed because I had a big double pallet I hadn't got round to cutting up which will be going below the logs.

great video and log store looks fab

@CharlieDIYte

Жыл бұрын

Thanks 👊

You do amazing stuff! Well done from 🇮🇪!

@DerekTJ

Жыл бұрын

There is a substitute for guttering; it's louvred strips that spread the drips over a bigger area. This Old House have a video about it done on a shed.

@CharlieDIYte

Жыл бұрын

Thanks, I'll check that out. 👍

Looks great. I’ve done a similar structure. I use big supermarket cages to stack the wood - keeps it all tidy and lets air flow.

@CharlieDIYte

Жыл бұрын

Thanks Olly, I appreciate the advice. Yes I think the stacking is going to need some serious thought. 👍

@asilver2889

Жыл бұрын

Me too! Shelves too. Just trying to work out how to get wood deliveries tipped straight in ...!

Great video Charlie, looks like a really satisfying project! I find the 16g nails work fine for panelling, but need to be fired in at opposing angles to stop pull out, also try to keep the head flush (again to reduce pull out), keep up the good work 👍🏻

@CharlieDIYte

Жыл бұрын

Thanks buddy. Very good point. I'm posting an update vid over the next couple of days so keep an eye out for that 👍

Great work. It always amazes me how much you get done in a working day!😂😂😂

Great job Charlie, the finished result looks excellent and fits in perfectly against the garage. Thanks for showing all the detail of how you built it. Suggestion for connecting your Henry hoover to your router, I have a Henry as my workshop dust extraction, connected to a cyclone, and then a length of standard hoover hose to connect to the tools. I have adapters made out of 40mm white waste pipe - the hose fits snugly into one side, and to adapt it to the different tool ports have used either waste pipe connectors or reduced or increased the size of the waste pipe using a heat gun. Works perfectly and very low cost! There’s a video on James’ Man Cave channel on this. I’ve had mixed success with cement infill over the top of lead flashing. Even the stuff that our builders put in on the house extension has cracked and come loose over time. Think it really needs a more flexible jointing material like building selant

@CharlieDIYte

Жыл бұрын

Thanks Geoffrey - some great tips there. Yes I'll see how I get on with the flashing. I've actually had to modify it to introduce some ridge tiles (the half length tiles to maintain the overlap) so I may have to redo the flashing in the spring. I'll check out that channel. Great suggestions on the vac connectors. 👊

Major case of log store envy! Good job looks great

@CharlieDIYte

Жыл бұрын

Thanks Andy 👊

Wonderful work and lots of useful info in comments. I stack logs in layers between light battens tied to pallets and rafters then braced with thin rope every 1.5 metres. I tried to post a photo link but KZread blocked it. A shallower roof angle would make the edge higher, you are going to bang your head when stacking high, just like I do.

@CharlieDIYte

Жыл бұрын

Thanks. I saw the photo - ingenious arrangement! Yes the head banging is the biggest design defect 🤦

Great job on the log storage area Charlie! Thanks for sharing the video with us! and Merry Christmas! ✝🎁🎄And Happy New Year!😎JP

@CharlieDIYte

Жыл бұрын

You too. Thanks for the comment 👊

@IEnjoyCreatingVideos

Жыл бұрын

@@CharlieDIYte 😎

Every building expert in the world seems to have found your video and decided to give you free advice. Who needs the algorithm 😂

@CharlieDIYte

Жыл бұрын

Great isn't it! Like the one who pointed out I still needed eave tiles. Now installed and I need a storage system for the logs. 👍 There will be a video #2

That's a beauty of a log store

@CharlieDIYte

Жыл бұрын

Thanks 👊

Great work

@CharlieDIYte

Жыл бұрын

Thanks 👊

Very smart job!

@CharlieDIYte

Жыл бұрын

Thanks 👍

Love this. Fascinating to see the different building materials, here in Canada you just don't see lead flashing and ceramic tiles.

@CharlieDIYte

Жыл бұрын

Thanks buddy. Humbled you're watching my vids in Canada. Yes we've got different stuff but I'm realising you and pretty much the rest of the world build houses better than we do!

A tip when using lead sealant! Fill the entire gap with sealant all the way down the length of lead n then start at beginning with a wet finger simply dab the sealant, it will push in and not smear

@CharlieDIYte

Жыл бұрын

Thanks Dominic. Makes sense 👌

Well done

@CharlieDIYte

Жыл бұрын

Thanks 👍

@10:00 Agree with the adjustment on the rotating the tenon. One other point if you put them in the easier way you’ll also minimize cross grain, resulting in a stronger joint. As far as I can tell they’ve been installed face down instead of edge down.

Good Video Charlie.

@CharlieDIYte

Жыл бұрын

Thanks 👊

Fantastic video!

@CharlieDIYte

Жыл бұрын

Thanks 👊

Nice looking and practical store ! Well done !👍p.s for logs leave a gap with cross wood between slabs and logs to allow air circulating in bottom.

@CharlieDIYte

Жыл бұрын

Thanks. Yes a few of you are saying this - very helpful. I think I'm going to have to give some serious thought to the stacking.

Bang tidy Charlie! 👌

@CharlieDIYte

Жыл бұрын

Thanks Frank 👊

Nice job.

@CharlieDIYte

Жыл бұрын

Thanks 👍

A super Job Charlie! The 45 degree angle was worth it as it matches the garage roof as you said. Id be happy with this as a porch or an arbor, never mind a log store. on that point, maybe a wisteria or a climbing rose growing up it? most would be frightened of a climber but I think it would really set it off

@CharlieDIYte

Жыл бұрын

Thanks David. Yes I might do something similar over the front door. I've already had to make one modification though. For some reason I didn't bother with a ridge tile layer. They're now in but I'll have to redo the head flashing in the spring...

Always wondered how the lead was attached to the brickwork. Great vid as per!

@CharlieDIYte

Жыл бұрын

Thanks. Yes those clips are great. 👍

Top job👍

@CharlieDIYte

Жыл бұрын

Thanks 👊

Very pretty but ... Put trellis on the wall to keep the logs off the masonry and pulling damp through. Put old pallets on the slabs to stop logs drawing up water and help dry from underneath. Finally, get some weed suppressing cloth and hang it on the sides and front and driving rain won't get in at all while the logs dry.

@CharlieDIYte

Жыл бұрын

Thanks, all good advice 👊👌

I don't think you'd refer to that as a ridge beam, but more of a ledger. Great work Charlie. Always impressed by your persistence!!

@CharlieDIYte

Жыл бұрын

Thanks buddy. Couldn't work out what it was called 🤦😉

@rayclayton4786

Жыл бұрын

Also, the 90° notch you cut out of the rafters are called ‘birdsmouth joints’

Looks great

@CharlieDIYte

Жыл бұрын

Thanks 👍

Beautiful ❤️

@CharlieDIYte

Жыл бұрын

Thanks 👊

Look out for wasps mate, they love stacked dry timber. Great video

Luvley jubbly Charlie 👍

@CharlieDIYte

Жыл бұрын

Thanks 👊

Great video,,,,,,,,,,,,,thank you !!!!

@CharlieDIYte

Жыл бұрын

Thanks Michael. Appreciate the comment 👊

Another good DIY video Charlie, hats off to you the way you put your videos out knowing they are going to be scrutinised, 99.99% of DIYers would be delighted if our log store looked like yours 👌 I recently used 35 bags of that brand of postcrete and found quite a few with set lumps, just wondering if this was a one off with this brand?

@CharlieDIYte

Жыл бұрын

Thanks Nigel, really appreciate that. Yes the scrutiny is one of those things - keeps me on my toes - like the guy who posted rightly just before you that I had forgotten the eave tiles. Still don't know why I didn't bother with them but they're in now but I'll have to redo the flashing! On the concrete that's not usual. I did have a big rock in one of my sacks but the sack had a cut in the side. Maybe yours did or moisture got in during the bagging up. Very frustrating for you!

Interesting project presented at a good pace with plenty of information. I'll be trying the floating tenons and I like the post and wall plate detailing. You may find it helpful to sub-divide in to bays so you can be filling one while emptying the other. I've built a few wood sheds and heat the house with a wood stove and find being able to start restocking before the whole store is empty very helpful. A small kindling shelf is also useful.

@CharlieDIYte

Жыл бұрын

Thanks Rob. Yes I'm working on the storage at the moment. I'm putting a pallet base in and a shelf - and a trellis at the back to keep the wood off the garage wall. Haven't decided yet whether to subdivide with a vertical separator although I can see the sense of it. 👊

@robpgardens7592

Жыл бұрын

I'll look forward to seeing the results. Interesting points. It seems a shame to make such nice structure and then shove a few old pallets at the base. How about breaking up the pallets and just laying two parallel pieces at the base of each layer of firewood? About an inch gives plenty of ventilation space under the stack. Less room for vermin too. Given there's a roof and good ventilation I wouldn't have though it necessary to batton out the garage wall either. Happy stacking either way. In a separate topic - I was concerned our wood stove was causing particulates inside the house so bought a particulate meter. Interesting results and the stove is not a concern. Putting the toaster or oven on in the kitches sends it shooting up. Candles dangerously so! May be worth an episode to see what your findings are?

Excellent video 👏. In my experience, digging stone out of bags is easier with a round head long handle shovel or pointed spade. They get into the stone much easier. I have both but the long handle round head comes in handy for all sorts, especially sifting my compost through my soil sieve and picking up doggy’s contributions..I’m sensitive to that one and being as far away as possible helps 🤢🤣🤦🏻

@CharlieDIYte

Жыл бұрын

That's a very good point. I ended up freeing it up with my mattock pick.

Another excellent video, such good explanations and clear advice and tools required. Having the costings is also very useful. I wonder how long it took you to do and where you find the time especially in the winter when we are short on daylight.

@CharlieDIYte

Жыл бұрын

Thanks. It basically took just over a week to build and then another week to do the video 🤦😉

Great job for a diyer. The other end needs boarding just to add shelter. 👍👍👍

@CharlieDIYte

Жыл бұрын

Yes I'll probably do that at some point. 👍

Couple suggestions: Use cut down pallets on the RHS and front or you'll find it is a pain to stack the wood without it tumbling out - wood is not nice and round! You said the wood you have is pine - not good for wood burning logs - great for getting the fire going but not regular during as the resin will increase the risk of a chimney fire. If you have a corrugated liner this nicely traps the tar from the resin and increases the risk if a chimney fire - a concrete liner is best. The 45 degrees means you'll end up with more wasted 'roof' space for stacking wood. You should have had made a platform / work area next to the wood store for splitting / sawing the logs, so less of a walk from cutting to stacking. I didn't notice a path from the log store to the existing path - or will you be paddling in the mud from the log store to the other pathway?. A canopy would have been useful so that when you are collecting logs to bring into the house you and the logs don't get wet!. During a typical winter you can use 4 cu metres of wood, thus you should size your storage capacity to ensure you have space for more than one winters worth especially if it is a hard winter. A separate area for stacking kindling would be useful. The gravel at the front might be decorative not but once it is mixed with sawdust will give issues down the line.

That shovel wasn’t ideal to unload that bulk bag.I felt your pain 😆

Looks great, another very well documented project with some great craftsmanship

@CharlieDIYte

Жыл бұрын

Thanks Ollie 👊

Whilst the front will get more splash back on it, it will also get the most air. Stacks can end up leaning forward when they dry faster at the front - specially if stacked really wet/green.

@CharlieDIYte

Жыл бұрын

It's a good point, and actually I reckon the splash back will only happen nearer the bottom. I might also install guttering.

As a carpenter myself I can’t help but admire the work you do Charlie, great looking log store and well built. Can I ask what make those work trousers are that you’re wearing?

@CharlieDIYte

Жыл бұрын

Thanks Andy, coming from a pro I really appreciate that. You certainly can. They're Ballyclare. Had them for years and love them. The black fleece I often wear is also Ballyclare. Originally both gifted to me but they don't pay me anything for the association.

Try doubling up on the very bottom batten to lift up the first course of half tiles. Then the first full tile will sit nicely.

@CharlieDIYte

Жыл бұрын

Thanks. Yes I'll do that next time, and also forgot the eave tiles for some reason.

Excellent video and great project, looks amazing! I particularly liked the detail on the lead flashing as that's something I've struggled with in the past, using flash band which is nightmare stuff to with with. If that was a rendered block wall with no convenient grout line to follow, how would you tackle it? Snap a chalk line and cut to it the same manner I suppose?

@CharlieDIYte

Жыл бұрын

Thanks. Yes that is how I'd do it. There will be an update video on the log storage as I've had a lot of brilliant suggestions on this, plus I did have to modify the roof the other day because I didn't put any ridge tiles in for some reason. 🤦😉

Great project!! Can I ask how high is the eaves? Thanks

Lovely looking log store Charlie. The pitch is too steep though as it becomes a nuisance as you pile the logs up higher but I can see why you did it like that. 😊

@CharlieDIYte

Жыл бұрын

Thanks. I agree it is a bit steep.

Only thing I would comment on is possibly using metal brackets for the wooden posts. In some cases this can prevent the wood from rotting from moisture, I know you've used a shrink wrap around the posts before digging them in and it's covered by the roof so chances are it should be ok, but sometimes if the wind blows in rain the moisture can travel from the top of the post into the buried section where it can't dry out easily and causes rot to set in.

@CharlieDIYte

Жыл бұрын

Yes that's a fair point. We'll see how we get on with it but I think it'll be a fair few years before I have any problems with it rotting. One thing I did forget was to put in a row of ridge tiles, now added. I'll mention this in the update video👍

that looks like a brilliant job to me - it's so high, presumably you could add some storage in to the "loft" part for other things?

@CharlieDIYte

Жыл бұрын

Thanks. Yes I'll try and use that extra storage. 👍

Great video. Can't believe you didn't show us it full of logs?!?!

@CharlieDIYte

Жыл бұрын

That's video #2 I had a sneaking suspicion it wasn't as easy as just lobbing in the logs and I've had so many helpful suggestions as to how best to stack the wood. Also I wanted to talk about log splitting. 👍

Charlie are you still maintaining a full time day to day job now? Or are you solely youtube? I love your vids by the way, not watched any for a while, but a good amount of detail, yet a pleasure to watch. Not easy to do :)

@CharlieDIYte

Жыл бұрын

Thanks Kieran - really appreciate the feedback. Yes doing this full time now which sounds amazing but has its downsides! 👊

I bought it a year ago for a project i haven't started...........oh that my whole tool shed LOL

Great video Charlie. I used a platform of besser blocks to allow ventilation, reduce termite infestation and reduce rot/damp. I have the sides open and put a tarp down the front during winter. This allows ventilation and reduces rain ingress. Cafe blinds would be a step up if it is in a presentation area, mine is in a utility area so a tarp will do.

@CharlieDIYte

Жыл бұрын

Thanks, yes from what you're all saying, I do need to give some thought to how to arrange the wood, rather than just chucking it in there. Will see if I need the tarp or not but at least I have the option. A green one works look quite smart 😉

Hi Charlie if your view count goes up on this video it's me 😂 I'm trying to build my old log store scaled down version and I'm getting some great tips on setting the roof tiles out. I'd be properly stumped without your explanation 👍

@CharlieDIYte

10 ай бұрын

Aw, thanks Melanie. Just remember those eave tiles at the top - which I forgot first time trying for some reason.. kzread.info/dash/bejne/ZKSBmreoaKaWqdI.htmlsi=9TZAYQltG1VvEsDb

Fantastic job Charlie, well done. It will be well worth the cost. We're using wood that I simply covered with a roll of wide dpc. The rain does get to the ends but not enough to ruin it. Still finding wasps in the pile but they're mostly dead now, only the occasional one wakes up from the warmth indoors. How do plan to stack the wood? Would you consider partitioning it for safety and ease of organising the wood by date so you're burning oldest first? I'm planning to build similar size so, this has been very useful. Cheers and merry Christmas to you all 😊

@CharlieDIYte

Жыл бұрын

You too mate and good to hear from you. Yes a few people have given me ideas on storage since I did the video. I'm going to put pallets at the bottom - really pleased as I have a massive pallet I haven't got round to cutting up. Thinking of a trellis structure at the back to keep the wood off the wall but that could be over kill. Would be really good to divide it up into sections. Maybe a central shelf supported in the middle giving me 4 sections....

@voodoomotion5855

Жыл бұрын

@@CharlieDIYte pallets work well at letting the air flow in. For our brick bbq this year I simply used a few old engineering bricks spaced apart which surprisingly didn't rot the wood. Trellis might be overkill, not sure how the cost compares to something like gabion mesh which might be nice with a large enough aperture to not hide the lovely brickwork. Your store looks like an original period feature, be a pity to spoil it with anything too industrial - guess it's the usual striking a balance between style and function. Definitely keep it safe though; our boy thought the firewood was a giant game of jenga 😱 maybe a gravel board along the bottom and something similar along the roofline to stop splashes and rainwater being blown in? Dad suggested louvre doors if a lot of rain hits that end of the house, or a cheaper option might be windbreaker type fence panels fashioned into gates. One thing's for sure you'll definitely have enough storage space for a warm winter! It's all good exercise too 😂

I've watched a couple of roofing videos that give information about the grade of the timber used on house roofing - there are different grades for soft to hard wood for the extra strength that harder woods have. Using softwood is most likely to be alright, if you do change any of the wood out if it deteriorates, I'd use more of a roofing standard hard to semi-hardwood. I don't think that there's going to be much of a problem but if you do change any of the timber, it would probably be advisable.

@CharlieDIYte

Жыл бұрын

Thanks Steve. My roof is over engineered given I've used 4x3 rafters where even must domestic properties these days use timber which is a fraction of those dimensions, but I hear what you say. 👍

Hi Charlie. When researching did you come across any guidance for flashing into/through external wall insulation? I’ve been looking on KZread but to no avail. I’d love to try a project like this but my entire house and garage (converted into a painting room for my wife) are cloaked in EHI!

@CharlieDIYte

Жыл бұрын

Hi Chris. I would be inclined to make it free standing if I were you. It's going to be so sturdy even if it's not screwed to the wall. Plus people are saying there could be insurance issues with log stores attached to houses.

Do you think you will add a small flood light? Useful when fetching logs at night

@CharlieDIYte

Жыл бұрын

I've been thinking about that. Maybe even solar charged 🤔

😎

Hi Charlie, please check with your house insurer as my friend had his renewal refused after he declared that he had added a log store to the side wall of his house ( I know yours is on the garage but worth checking) they refused to insure him as they said it was a fire risk.

@CharlieDIYte

Жыл бұрын

That's a fair point I hadn't thought of. There's always something isn't there!! As you say, should be ok as it's a garage away from the house but if we ever convert it... I'll check.

@simonmiddleton4977

Жыл бұрын

@@CharlieDIYte Great build by the way 👍😃

@DukeofDave

Жыл бұрын

Fire risk 🤣 gotta love insurance. I have 1000 litres of kerosene outside and they're fine with that.

@jakejohnson_

Жыл бұрын

@@DukeofDave your tank will be fire rated for about 60minutes, dry logs not so much haha

@DukeofDave

Жыл бұрын

@@jakejohnson_ it definitely isn't. And the logs would need a substantial fire to get them alight. If you put a heat source in between the oil tank and a log store the kerosene would be blazing log before the logs.