HOW TO BUILD A COOL ADJUSTABLE DOUBLE WISHBONE SUSPENSION IN SCRAP MECHANIC. (Step by Step) Reupload
Tell me what you want to see in the next video. Here is how you build a different one • HOW TO MAKE A DOUBLE W...
Жүктеу.....
Пікірлер: 15
@spidertyler Жыл бұрын
This is so cool, it basically runs the car into a water bed lol
@km077 Жыл бұрын
me at the start: Surely this can't be that good... me at the end: OMG
@RainusBrainus4 ай бұрын
I think you can eliminate the problem with the controlled bearings. If you remove the two blocks that are directly under the corner pipes it will allow them to swing freely.
@mastersteamer36979 ай бұрын
thx mate! need this :)
@CyberSCP-426 Жыл бұрын
this is an awesome tutorial however one thing that i would recommend is to have a part count.
@miitch99 Жыл бұрын
Great tutorial :D You didn't just say "how" to do it, you also said "why" :)
@Maj_Bavdek Жыл бұрын
Thanks for this awesome tutorial 10/10 helped a lot! But where you need to change the controller degree from 15 to 10 (11:35) it dosent let me. It just goes to 0
@HighwayKiller
Жыл бұрын
@majko3434 thanks. you need to hold shift and turn it.
@Maj_Bavdek
Жыл бұрын
@@HighwayKiller Thanks!
@alexcooksey3979 Жыл бұрын
my wheels cave in when I'm turning and how do I fix it
@HighwayKiller
Жыл бұрын
hard to tell without a photo. try with 0 degrees on the controller.
@tonyhenderson37034 ай бұрын
Literally did everything to the End and I went afk then when I let it off the lift the back suspension broke and I can’t find out why😂 pls help
@piratepanda2031
Ай бұрын
you find a fix? My wheels seems to want to fold under the whole wishbone!
@luxtesyy8222 Жыл бұрын
Why does mine keep turning left I’m new to scrap mechanic btw
@HighwayKiller
Жыл бұрын
maybe because it is making a suspension glitch, try to look at the pip or blocks that are connected to the suspension if they are in the wrong spot, and check for bearings. if that doesn't work try to slow down the video and rebuild it step by step. if it still dont work try this one kzread.info/dash/bejne/kaSet7qGqZaTYNI.html.
Пікірлер: 15
This is so cool, it basically runs the car into a water bed lol
me at the start: Surely this can't be that good... me at the end: OMG
I think you can eliminate the problem with the controlled bearings. If you remove the two blocks that are directly under the corner pipes it will allow them to swing freely.
thx mate! need this :)
this is an awesome tutorial however one thing that i would recommend is to have a part count.
Great tutorial :D You didn't just say "how" to do it, you also said "why" :)
Thanks for this awesome tutorial 10/10 helped a lot! But where you need to change the controller degree from 15 to 10 (11:35) it dosent let me. It just goes to 0
@HighwayKiller
Жыл бұрын
@majko3434 thanks. you need to hold shift and turn it.
@Maj_Bavdek
Жыл бұрын
@@HighwayKiller Thanks!
my wheels cave in when I'm turning and how do I fix it
@HighwayKiller
Жыл бұрын
hard to tell without a photo. try with 0 degrees on the controller.
Literally did everything to the End and I went afk then when I let it off the lift the back suspension broke and I can’t find out why😂 pls help
@piratepanda2031
Ай бұрын
you find a fix? My wheels seems to want to fold under the whole wishbone!
Why does mine keep turning left I’m new to scrap mechanic btw
@HighwayKiller
Жыл бұрын
maybe because it is making a suspension glitch, try to look at the pip or blocks that are connected to the suspension if they are in the wrong spot, and check for bearings. if that doesn't work try to slow down the video and rebuild it step by step. if it still dont work try this one kzread.info/dash/bejne/kaSet7qGqZaTYNI.html.