So what do you guys think?? Did we miss anything?? Let us know down below!

@Deckageskate666

3 жыл бұрын

only thing I think you missed was cams and springs. other than that, great overview. please post on the evo x forum on facebook.

@dbnewman89

3 жыл бұрын

Video was good, however you said these cars are tuned using Evoscan... Thats not true, they are tuned using Ecuflash, and logged using Evoscan.

@watchman2719

3 жыл бұрын

What if you’ve got an SST

@xNukedApplez

3 жыл бұрын

@@watchman2719 like every evo x?

@watchman2719

3 жыл бұрын

@@xNukedApplez what do you mean?

half of the parts haven’t been in stock in forever

Sweet Honey BBQ!! That's mint..

@maperformance

3 жыл бұрын

Oh yeah!!!

700 club here 🫡 home built darton sleeved block absolutely love the services map provides! Couldn't have done it without them !

@if7dmitrij191

8 күн бұрын

Hey, do you have Instagram? I am planning to push around 700 in my Evo too and would love to know some people that did it before me

Have everything except the turbo and suspension mods. Big thanks to MAP for the fully built motor and supportive customer service. I'm like a kid on Christmas waiting for the installation of everything and tuning. With labor and everything I've spent about 15k 😁🙏. Also side note fellas patience is a key factor when you're doing this process. Keep calm, drive safe and most of all do your best to keep it on the track.

@maperformance

3 жыл бұрын

Couldn't agree more! Hope you are loving the motor 💪

@activeej8858

Жыл бұрын

Ever get the evo finished? How is it?

Awesome videos short and to the point unlike the million 20+ minute videos of rambling all over KZread

2015 evox GSR. 2.2L stroker, Garrett g30 770 turbo, ETS v-band single scroll manifold / downpipe, e85, FIC 2150CC , horsepower logic tune. …. Plenty of maperformance parts. 600wph (mustang dyno) on low boost (33psi). Gunna turn it up to 40psi after I change the wastegate springs.

Yo yo Leooooo! Very precise as always! Awesome job!

@maperformance

3 жыл бұрын

Thank you! Cheers!

Good start information!!

That’s actually spot on! I have a built 2.2 ets 6466 turbo kit radium fuel system and shep trans with an exedy triple and I make over 800whp

@activeej8858

2 жыл бұрын

Do you mind sharing how much a build like that would cost? Estimated?

@anthonyturk2890

2 жыл бұрын

@@activeej8858 I had probably 35k into the build roughly. Also depends what exact parts you end up using. I spared no expense on my personal build which I’d probably say maybe was closer to 40k all said and done

@julianrivera6820

6 ай бұрын

@@anthonyturk2890 how is driving the triple disc? I have a quarter master twin disc clutch pushing around 830whp and I don’t like the clutch at all

@anthonyturk2890

6 ай бұрын

@@julianrivera6820 honestly it’s amazing. I didn’t have any experience driving a high horsepower car before that evo and honestly never stalled once had very easy pedal feel

Great video. I make 650hp 450tq on a mustang dyno with a gtx3576r. Gsc s2 cam, valve spring. Sleeve block, 1650 fic 525 walbo, Mivc delete on the exhaust side. Act hdss clutch, map 3.5 intake. The one thing i hate the most is the heat soak.

@evoguy23

3 жыл бұрын

Do you run a heat shield or wrapped manifold? They seem to help

@ceasarcota4084

3 жыл бұрын

@@evoguy23 i just got the maps heat shield and I cerakote my maps exhaust manifold. To bad they don't sell a exhaust manifold heat shield.

@lcameeno1

3 жыл бұрын

How often do you do your oil changes?

@ceasarcota4084

3 жыл бұрын

@@lcameeno1 I change my oil every 4k miles and i run penn grade 1 10/40

@jetbob309

3 жыл бұрын

@@ceasarcota4084 Can't you just custom fab one?

1,000whp vid next, please! #sweethoneybbq #goals

All you need to do is build the head and keep the bottom block stock. Build the internals for it.

Hell yeah!

I have 2.2 litre 750whp evo x . I went the surge tank route with 2000cc I'd injectors. I used a full race 8474 kit .

@NightcrawlerNC

2 жыл бұрын

U stroked it?

@dsmtsi

2 жыл бұрын

I have an 8374 making 500 on the stock block. I am trying to decide to build the motor myself or just buy from a builder. Where did you get your motor built? How is the 2.2 and how is the spool, does it make much of a difference over the 2L?

I'm still stock block with my X. ETS Intake, ETS Upper and Lower IC piping, ETS Extreme Catback, ETS Test pipe, Cobb EBCS, ID1300's, and an AEM 320 fuel pump. Stock turbo converted to a 20G(billet wheel, bigger housing, etc) stock hotside though. Dual map on pump 91 and E85. I only run E85! Waste gate won't let me go past 26 pounds right now. I plan on upgrading that soon. Currently at a conservative 383whp 373wtq. Stock clutch with 80k miles on it 😎

@emlix1

3 жыл бұрын

I was at 400awkw with full bolt ons until the timing chain failed, I'm just waiting to get her back after an engine rebuild and new rotating assembly: manley h beam rods, CP pistons, new turbo... can't wait.

25k easy

@kevinmorelikekevout3639

3 жыл бұрын

LMFAOO 25k ha you’re funny

@Itachlazcano21

3 жыл бұрын

What no 😭😭😭 cap lmao

@timsikora826

3 жыл бұрын

Uhhhhh more like 60k ++++

I upgraded my fuel pump but only staying at 500whp so I know the fuel rail isn’t needed but is the fuel pump regulator still needed? Is it usable without having the fuel rail?

When I win the lottery I got 300k for yall to build the fastest street legal Evo x on the mf planet mark my words

evo_cb 🔥🔥

What's the ring gap for that HP? I have a 87mm pistons

Leo keeps moving in place, I feel like the caffeine in the coffee gave him the runs shortly after this video

@maperformance

3 жыл бұрын

😂😂😂

#morepowerbaby

Now I want 700hp!!!

@maperformance

3 жыл бұрын

Do it!! 😈

does anyone know the name of that screen in the center console @0:25? i cant find the name of it

I just want 600, do i need to sleeve for that??

Goals for my evo X 2008

What would be the best set of ignition coils that you would recommend for an evo x?

@maperformance

Жыл бұрын

Give us a call at 1-888-627-3736 or send us an email at sales@maperformance.com and we can give you some options!

What happened to those sti videos

My next build gotta be 500+

Don’t even see the turbo kit on the site???

How much are we looking to get into$$$$

Is a 3.5 inch intercooler sufficient enough for this amount of power?

@johnryan8985

2 жыл бұрын

Yes. Just make sure you get a good core. Some cool better than others. With air bigger isn't better. If you throw a drag manifold for example you can cause lag.

Where is the 2002 subi ej20 vid

If I buy parts from you guys that will get me to 500whp do you have any shops that could install and tune them near Inverness florida that you could recommend?

@maperformance

2 жыл бұрын

We have heard great things about Performance Destination in FL!

I made 602whp on my 3576 gen 2 set up. I'm itching for more since my engine can take the power. Fully built 2.0. Expect to spend atleast 20k if you're not doing any of the work, very expensive.

@cubansoldier2098

3 жыл бұрын

602? Thats it? Is that E85? How much psi? That turbo is rated for over 700, on a fully built engine pushing the psi it should be more🤔

@HISOOOOOOOS

3 жыл бұрын

@@cubansoldier2098 it was a stock frame turbo I bought before I decided to go balls deep on the build lol. I just bought a Full Race efr kit and going for power this time around.

What's the max power you can push the sst?

@garysgarage6288

2 жыл бұрын

Been looking into it myself the high end seems to be about 450ftlbs of torque but there is a company called SSP that will do a stage 3 upgrade and full rebuild/refresh for you for around $3000 and will handle 600+ftlbs

Now, is it the 2100 cc injectors recommended, in relation to being using with e85.

Nowadays you can just buy the ATP GTX3584RS stock fitment.

i want to make the jam

So o got a fully built motor .. GSC cams spring retainers pistons arp head studs.. ets intake and intercooler .. down pipe , twin disc clutch , turbo back exhaust , e85 fuel system .. 450 pump .. fuel rail .. tune .. Fp18k turbo .. exhaust manifold .. I’m pushing 390 pump 430 on e.. I see you guys 500 hp on a stock block I’m heavily modified and I’m 100 hp away from that… What issue am I having is it the turbo that’s too small?

@maperformance

2 жыл бұрын

Definitely going to need a bit bigger of a turbo to push 500hp. Give us a call at 651-348-8811 and we would be happy to discuss some options!

How can I contact with u?

Just asking, Does all of the parts can be install on a JDM evo? (RHD spec)

@maperformance

11 ай бұрын

For the most part yes.

@akiyz_xd1751

11 ай бұрын

@@maperformance Aight, since evos are so rare here, im thinking of converting a Lancer Gt into an evo. Hopefully all the parts will fit just fine.

Is it possible to have 500hp on pump gas? Reliably

@user-sh7hm5pf1q

3 жыл бұрын

I’ve heard the T3/T4 turbo kit will get you close to that, with some supporting mods I’m sure it’s doable on pump gas, I wasn’t so sure before but I’ve heard it can be done.

@Ouhayottoko

3 жыл бұрын

@@user-sh7hm5pf1qI'll probably look into that! I dont know if theres an e85 here in NewZealand so kind of meh

@wecway3551

2 жыл бұрын

Yes, I have 521whp and 455 torque on 93, but everything is built with Map stroker 2.4 and stage 5 head.

What no links how am i supposed to fix mine whith no links to shit that yas used.thanks

725 HP on my 2008 Evo X GSR.

@DrewwwLz

5 ай бұрын

Sleeved?

How much???$ are we talking about

I know that this is probably a dumb question but will all this fit and work for a 2013 ralliart?

@lucasjaramillo3478

3 жыл бұрын

Highly doubt it. The ralliart and evo engines are way different

@xNukedApplez

3 жыл бұрын

@@lucasjaramillo3478 it’s just a bigger turbo

@lucasjaramillo3478

3 жыл бұрын

Jordan Mead it’s a twin scroll, the Evo engine also has a more aggressive camshaft and tuning

@xNukedApplez

3 жыл бұрын

@@lucasjaramillo3478 I'm talking about dimensions wether it would fit in a ralliart or not. The tuning is the simple part, just thinking if it'll even get in the bay at all

@lucasjaramillo3478

3 жыл бұрын

Jordan Mead the engine as a whole wouldn’t respond well to boost and high power because of the cam

Can y’all do a video on how to make a 600whp Subaru?

I used to make 706who until my 6266 blew on me for a 4th time. Im now gona try out a different brand of turbo. Im going whit a borg sx369. Hope it will last longer than the precision

@supernice_auto

2 жыл бұрын

precision turbos are trash

How can I contact with u about built engine

@maperformance

2 жыл бұрын

Send us an email at sales@maperformance.com!

Step 1: Buy a Evo X GSR... Step 2: Proceed to watch the video

@maperformance

3 жыл бұрын

Step 3: DO IT!

@dabearsgomez

3 жыл бұрын

Or just buy it fully built for 35k+ like I did 😎😎

@Divine_WRX

3 жыл бұрын

@@dabearsgomez sounds boring

@dabearsgomez

3 жыл бұрын

@@Divine_WRX haha, as true as that might be, I can't afford a 20k car and 30k plus to make the car up to par with what I bought. I looked around for something that I would not have to spend to much on parts...I lucked out with my GSR and the price.

How much power am I making? My power level is over 9,000..... nobody can compete 😎😂

This is more of a "plug and play" build/explanation "how-to" video... Thought I'd get more out of this.

Would be nice if you put a price for everything as well. Considering this is pretty much just a glorified add for everything you sell.

@maperformance

2 жыл бұрын

Check out this video! It's got ALL THE PRICES! kzread.info/dash/bejne/gIias6azism0YLQ.html

How to make 700 whp? Don’t have kids lmfao

@maperformance

3 жыл бұрын

Facts!!

@dabearsgomez

3 жыл бұрын

I have 2 kids, my evo x makes 716hp on E85😎

@ruskibruski

2 жыл бұрын

@@dabearsgomez get those kiddos to school quick

Funny you say it doesn’t take much to make 500 hp I dropped $25,000 in mods and I’m at 390 on pump for 430 on eth

I know someone trying make his 2.0 CVT run 700HP. He already spent $15k on it, but still on the garage not running, because of some leak the mechanic couldn't figure out. He's very stoked about his "700" HP EVO. I know its pure BS since a CVT could only handle a very small fraction of what HP he wants, poor guy. Mechanic is pure BS too promising him moon and stars. I know, he dumb. What should I tell him? haha

@maperformance

2 жыл бұрын

I would tell him what you said here, just maybe in a nicer way... A transmission swap is a drop in the bucket if he has already spent 15K on the engine. Regardless, he will find out!

@centycents

2 жыл бұрын

@@maperformance Already told him in a nice way last night, he doesn't believe me. He's going twin turbo with his upgraded CVT. Oh well.

I want an evo X but I don't want to pay 30k for one with 80k miles

@maperformance

Жыл бұрын

The sad reality in today's car market!

@alexmaccity

Жыл бұрын

@@maperformance it's coming down what were they like pre pandemic?

Real trick is how to make 700hp and still be CARB legal....

@evoguy23

3 жыл бұрын

Step 1. Move out of California lol

@devon5078

3 жыл бұрын

come to washington we stopped doing emissions a year ago

@dsmtsi

Жыл бұрын

Stop voting Democrat

Just get a f80 m3 or q50 lol

cost of build 700hp evo? 😂