My man said a Toyota Civc Hybrid! I WANT ONE!

@ultimatediyguy395

11 ай бұрын

😭

Thank you! You just saved my day

And all this time I thought they just wasn't working is because they were, "black". 😄 Just joshin'. Thank for the video mayn! Just figured this one out today!

@doordash-nh1ih

Жыл бұрын

Leave it to the brothus to save yo bear ass.

I compressed the front right brake cylinder just a little and got vsc system check

Could I do this job without a scan tool now that I know the steps

i just bought that scan tool it will be here ina couple of days did 4 rotors and brakes traction light abs brake light is on dash looks like a christmas tree car stops fine i jacked the right rear up and hit the brakes and the wheel keeps turning but the brakes are stiff and right at the top.i wonder if i could do the steps without opening the bleeders because i know there's no air in the system i just need the calipers to push out

@jamesbroomfield7799

6 ай бұрын

How did your brake job turn out. Does yours have the electric parking brake? If so, Did you have to put power to the electric parking brake actuator before pushing down your piston on the caliper?

@bobdimartino6738

6 ай бұрын

believe it or not i took it to my old garage i worked at and borrowed their snap on computer and just reset the computer and it was all good so far other crappy scan tool wouldn't do anything @@jamesbroomfield7799

Did you have to have someone press on the brake pedal while bleeding both sides of the rear? Or can you just use the hand pump to do it

@ultimatediyguy395

5 ай бұрын

Yes

Do I need a scan tool to those brake bleeding?

@ultimatediyguy395

Жыл бұрын

Yes, a “bi-directional” scan tool to be specific

Ok I did it all also I bought the same scanner and now brakes are working properly but I can erase the vsc lights… do you know what may be wrong?

@daniellacruz5666

2 жыл бұрын

I can’t erase *

@ultimatediyguy395

2 жыл бұрын

Can I ask you a question, when did the light come on? Like what lead to you needing to bleed the brakes? And was the VSC light on before you bleed the brakes?

@daniellacruz5666

2 жыл бұрын

Ultimate DIY Guy hi, thank you for answering, I had to change the ABS pump system so after that I bleed brakes following your video but lights are still there, I don’t know what to do now

@ultimatediyguy395

2 жыл бұрын

@@daniellacruz5666 hmm does the ABS activate when you drive? Like do you feel the pedal pushing back at you?see if the scan tool can pull the codes for the light record the trouble codes if any then clear the codes out. Typically the VSC works off of your ABS sensors by simply driving the car it’ll usually go away. If that doesn’t work you can also try to reset it. With the car in park hold the Traction button for several seconds until you see the “TRAC OFF” & “VSC OFF” lights come on that means the systems are turned off. Then simply press the button to reengaged it. If none of those work you may have a bigger problem and may need to take it to get serviced. I hope this helps

@daniellacruz5666

2 жыл бұрын

Ultimate DIY Guy No ABS has not been activated at any time, c1345 (linear solenoid valve offset learning undone) is the code

What model is the scanner you have?.

@ultimatediyguy395

7 ай бұрын

Foxwell NT650 Elite

@CecilBrown1620

7 ай бұрын

Thanks, man. Do you have to get a separate cable that plugs into the car?, or just the one that comes with the tool?.

@ultimatediyguy395

7 ай бұрын

@@CecilBrown1620 just the one that comes with the tool

I want to buy a toyota civic they were only made in 2007 😂

@ultimatediyguy395

Жыл бұрын

😭

A 2007 toyota / civic hybrid?

@ultimatediyguy395

2 жыл бұрын

I know😩 I wanted to cut that out so bad😭

@jamessmoth8683

2 жыл бұрын

@@ultimatediyguy395 it might be better to remove that video and make a new one. I stopped watching it after that because it made me feel like you didn't even know what you were working on.

@ultimatediyguy395

2 жыл бұрын

@@jamessmoth8683 o ok I’m sorry to hear that

@thomsonkev

11 ай бұрын

@@ultimatediyguy395 Yup, I stopped watching it too at this point

You talk about all the code stuff, but you don’t actually show how to bleed the brakes.

@ultimatediyguy395

2 жыл бұрын

With the exception of the ABS motor turning on you bleed the brakes normally. But good point I will make a separate video showing how to bleed brakes using the 2 man method

dude what is this video lol

@ultimatediyguy395

2 жыл бұрын

I know the beginning gets everybody with the “Toyota civic”. This wasn’t one of those videos I was super prepared for but you can’t bleed the Toyota hybrid brakes normally if you read the intro you’ll understand why I made the video

@grizzlyaddams3606

Жыл бұрын

@@ultimatediyguy395 please keep the video up. Thanks.

Soon as i heard that toyota makes a civic. I stopped watching.

@ultimatediyguy395

Жыл бұрын

I’m still new to this, I get nervous sometimes when I’m recording and make mistakes

@visionnumber7988

Жыл бұрын

@@ultimatediyguy395 my bad. I probably would’ve felt the same

@mokomemmanuel5962

6 ай бұрын

Toyota hybrid not civic