Autel Scanner: ABS modulator bleed / How to Get air out of ABS / Anti-lock brake system bleeding
Автокөліктер мен көлік құралдары
Using an Autel scanner, I show ABS modulator bleed or how to get air out of ABS or anti-lock brake system bleeding. I use the Autel MP808TS scan tool. Air trapped in ABS can cause a spongy pedal and compromise braking. ABS pump bleeding is a must to restore optimal braking. If you are considering how to get air out of ABS module using a scanner, this video will be helpful. Other Autel scanners e.g. MK808, MS906 etc, as well as XTOOL and other scanners can also perform this task. I also show how to bleed brakes without removing tires.
Get from Amazon:
- Improved MP808TS - amzn.to/3J96Ss1 (use DIYMP808ZTS for 8% OFF!)
- LOKITHOR JA300 4 in 1 jump starter air compressor tool: amzn.to/38hzu2d
- Honda DOT3 brake fluid - amzn.to/3ClhqPZ
- 8mm/10mm flare nut wrench - amzn.to/3TabwI0 (Not the one used in the video, but it's good!)
I may earn a small commission from a purchase made through the link above. This does not increase the price you pay in any way.
Timestamps
0:00 - Intro
0:35 - What you should know & tools
1:04 - Setting up
3:05 - ABS modulator bleed procedure
4:00 - Wrapping up
#brakesystems #Autel #diyautoworksng #diymechanic #diycarrepair
Пікірлер: 64
What's your experience bleeding ABS, with or with a scan tool? Let's talk! Hope this was helpful.
@enriquerodriguez3770
Жыл бұрын
Never done a brake bleed with a scan tool. Hoping to do it on the next brake job coming up soon.
@DIYAutoworksNG
Жыл бұрын
Super!
@dougsanders6034
4 ай бұрын
I purchased a maxi-check pro about 4 years ago and tried to bleed the brakes on a 2003 Ford Taurus , and it said that it was not communicating with the vehicle.
Best abs bleed video on you tube I’ve seen so far!
@DIYAutoworksNG
7 ай бұрын
Thanks, mate!
Lovely video mate - fast, concise and complete. Thanks and good health!
@DIYAutoworksNG
2 ай бұрын
You're welcome! Thanks for taking the time to leave a comment!
Man, these videos are invaluable! Thank u sir 👍
@DIYAutoworksNG
Жыл бұрын
Thanks! 🙏🏼
Wow you used the right wrench, good job 👍🏽
@DIYAutoworksNG
Жыл бұрын
Thanks, mate! I love tools😊
Thanks for sharing the knowledge
@DIYAutoworksNG
Жыл бұрын
You're welcome
Thanx for the clarifying vid!
@DIYAutoworksNG
10 ай бұрын
Glad it was helpful!
Great video
@DIYAutoworksNG
Жыл бұрын
Thanks a lot, Kevin!
Very helpful video. 👍
@DIYAutoworksNG
2 ай бұрын
You're welcome!
Nice video. On a side note, I'm just eyeing that Bosch battery 🤩.
@DIYAutoworksNG
Жыл бұрын
😂😂😂🤣🤣🤣 Very reliable battery. Best I've used to date! Thanks for the compliment. 🤛🏼
Perfect
@DIYAutoworksNG
11 ай бұрын
👌🏼
Nice job Sir, I've followed you for over a year now. I have the MP808ts. Wouldn't be bad if am able to communicate with you privately.
@DIYAutoworksNG
Жыл бұрын
Thanks! I'm @diyautoworksng on Instagram
Thank you for the very informative video.I would like to know if the one person break bleed method ( catch bottle and tube only) with no pump can be recommended to flush the break oil? My car is 2018 Japanese model with ABS? I have the oil which came with car and is +4 years now.Can do it my self? Thank you?
@DIYAutoworksNG
Жыл бұрын
The no pump or gravity method can work, it just takes a long time in comparison. If the brake fluid is sealed, it should still be good. If it was opened or the seal is broken, it's not recommended for use.
Nice clean socks and shoes!
@DIYAutoworksNG
2 ай бұрын
🙈 Lol
Do you have to use the scan tool? Can you manually bench bleed it? Ive got a 2010 Impala and im about to put a new modulatoe in, im thinking about leaving the block in , and switching the motor and board. Recommended?
@DIYAutoworksNG
6 ай бұрын
You mustn't use a scan tool, but the manual bleeding process is messy. Pumping brakes, opening and tightening the ABS brake lines for the air to escape (it will come with fluid). Not sure of the design of the Impala ABS unit, but if there's a separate electrical component attached to the pump (as in some models), you may be able to change just that part without disconnecting the lines. If the lines are removed, bleeding should be done. Ultimately, do refer to service recommendations from the manufacturer.
Questions this is for electronic Breaks and not Hydrolic breaks? Also would you happen to know if this Scanner Tool can reprogramm non key fob keys? I have a 2005 Lexus ES300 and 2001 Toyota Sequoia.
@DIYAutoworksNG
7 ай бұрын
This is for hydraulic brakes. Yes, the scanner can program keys to those cars.
@gurglejug627
3 ай бұрын
As a matter of interest - when you watched the video, did you think he was bleeding liquid electricity into the plastic bottle?
If I wanted to do a fluid exchange. Should I do the Honda sequence first on all 4 wheels then finish up with this on the front 2 wheels or start with this then do all 4 wheels. Thank you
@DIYAutoworksNG
Жыл бұрын
Start with this, then do the 4 wheels.
I mean the method of one person pumping the break pedal until clear break oil appears in the bleeder tube? Do you recommend this method for DIY? Thank you.
@DIYAutoworksNG
Жыл бұрын
Sure. Tried and tested method it is! Where a scanner/ABS bleed is necessary is if you replaced any components or replaced the ABS lines.
@christopherschokman1604
Жыл бұрын
@@DIYAutoworksNG Finally, when you bleed using above method, does the engine need to be started during the pumping of break pedal.Thanks
@DIYAutoworksNG
Жыл бұрын
Nope. Just ignition on.
00:35 you didn't have to flex on us that hard with those sneakers 🥵
@DIYAutoworksNG
Жыл бұрын
😂😂🤣🤣🤣 Oh well!
@FansSports
Жыл бұрын
Ya!! 😳
*on my delphi diagnostic, it says that both bleed at the same time so that the abs pump is not stressed*
@DIYAutoworksNG
9 ай бұрын
Cool
1:14 Does anyone know what the name of that warning sound is?
@DIYAutoworksNG
7 ай бұрын
😂😂🤣😂🤣 Of all the sounds in the video? It's called metal gear alert sound.
I would like to buy a Scanner to my Viano 2.2 2014 163c Delphi ECU. Purge ABS, actuators, injector code, etc. Do you know if this scnner can do it?.
@DIYAutoworksNG
Жыл бұрын
It should. You can confirm the supported services here autel.com/vehicle-coverage/coverage2
@cransaftvalve734
Жыл бұрын
@@DIYAutoworksNG Like always mi Viano 2014 is not in the list. Thanks.
@DIYAutoworksNG
Жыл бұрын
Ouch! Like always? Limited support on scanners generally or just Autel tools?
@cransaftvalve734
Жыл бұрын
@@DIYAutoworksNG well, I don't know what scanner can do these works.
Hello, what about the rear brake ? Do you need to bleed them?
@DIYAutoworksNG
Жыл бұрын
The ABS bleeding procedure with the scanner on this car does not involve the rear brakes, however, after the scanner procedure, you will be required to bleed all wheels manually following Honda's sequence.
@Pera-Peric
10 ай бұрын
@@DIYAutoworksNGso what was this now? Why manual? I dont understand
@DIYAutoworksNG
9 ай бұрын
Remember that the procedure is focused on bleeding air out of the ABS itself, not the entire brake system and lines. The manual procedure takes care of air or old fluid in the brake lines.
Hey so it says on my truck the ecu doesn’t support it what’s wrong
@DIYAutoworksNG
11 ай бұрын
It means the test is not supported by the scanner on your car. Can be due to a number of reasons, the car may not support the test or the car does, but the scanner doesn't.
Just did an ABS bleed with scanner on my jeep wrangler. The scanner only had me bleed the right front and right rear tires then said the operation was complete. It didn’t ask me to bleed the other two tires. Is this normal?
@DIYAutoworksNG
7 ай бұрын
Probably the way the ABS on the wrangler is setup. Mine only bled the front 2
Dang dude do your updates lol
@DIYAutoworksNG
8 ай бұрын
Lol