Love your videos! They’re amazing!

Thanks for the video. It's very helpful 🙂👍

@RaisingNobles

3 жыл бұрын

You’re welcome!

My question is when baking, does it matter if we place the clay on the middle or top rack in the oven? Thank you!

Thank you for your video please tell me how you make them shine ? What are using for

After baking the clay of the earring, for applying the post do I bake again after applying the post with bake and bond. Also how long for baking the posts

Hello wonderful video what size jump rings do you use thanks for your wonderful videos

I live in my camper trailer and have a propane oven. Can I use my Cosori dehydrator?

What thickness are your earrings? If it’s thinner than 6mm does that mean it takes less time to cook?

Which oven mode do I use for polymer clay?

My earrings are about less than 1/4”and come out kinda soft that it is slightly bendable is that supposed to happen?

Can we bake it on the silicon mat?

Could u use a nail filer to sand the earring ?

When do you use a clear coat/ sealer? And why is it called? Thanks

Can we bake the clay on the stove in a preheated pot covered with a lid?

Which clay is recommended? Or is this trick for all kinds 🤔

I have a gas oven, stove on top and oven below, can I use that oven❣️

Thank youu for your video❤️ I have had a hard time trying to find out the right temperature!:( I will try 275 for 30 min tomorrow! A question, how thick do you recommend for earrings?

@RaisingNobles

2 жыл бұрын

yes try that!

Hi , I love your videos quick question do you place the earrings on a bowl with ice after the baking? Then sand them ? I’ve seen this on some videos and not sure if you have to do it .

@RaisingNobles

3 жыл бұрын

I don’t do that, no.

@julianna1937

3 жыл бұрын

Omg 😱 thank you so much for the response ❤️❤️❤️

Hello, thanks for the video, I have a question, can I continue to bake food in the oven or do I need a specific one for it? That is, the polymer clay does not give off any type of gas or material that remains in the oven?

@RaisingNobles

3 жыл бұрын

I leave my oven open and let all the smell dissipate before cooking in it. But I use my oven in my kitchen for the clay.

Hello ...thanks for the video. May I know how thick should be the paper sheet below of the earrings..seeing that he shouldn’t burn

@RaisingNobles

2 жыл бұрын

i just use regular cardstock, nothing fancy

@BetweenTheFoulPoles

2 жыл бұрын

@@RaisingNobles I was wondering the same thing, thanks! I assume it doesn’t burn at that temperature, and you don’t reuse each piece of cardstock do you? Just use it once and then throw away/recycle? Thanks! :)

I’m struggling with the baking process , my clay stays soft even after over 30 min! I need help plz 😢

When baking a shape onto of another shape do u need glue it or will it stay together once u put it into oven

@RaisingNobles

2 жыл бұрын

you need to use sculpey oven bake adhesive

If your earrings brake when you put on the earring jump rings could you hot glue them? Thanks

@RaisingNobles

Жыл бұрын

You could, but it won’t look very good

Ive got recommended to put oven bake clay adhesive on my earrings, im so confused, is it glue or it like to make the earring strongs ? Or it like..a glue to put two earrings together ?

@RaisingNobles

2 жыл бұрын

you just use that to adhere things to the earrings like earring posts or a flower etc. then you bake it and it becomes strongly adhered

If i want to put eyepins in my clay should i bake then drill in and glue it or bake it with the eyepin in??

@RaisingNobles

2 жыл бұрын

good question, I have actually never used eyepins, so I can't answer that sorry

So if you realize you have underbaked your clay whether or not due to temperature fluctuations isn’t it still salvageable? Couldn’t you just bake a little longer? I heard from somewhere else that when in doubt bake at a lower temperature for longer.

@RaisingNobles

3 жыл бұрын

I think it would be fine to bake it again

Should I keep both the oven rods on or any of top or bottom one off?

@RaisingNobles

3 жыл бұрын

I don’t have an oven with a lower oven rod, so I just use the top

How many minutes?

I unfortunately have a crappy electric oven. Im gonna make earrings and bake them at my mothers house. ( she has a good gas oven). If i make the earrings one day can i wait a few days to bake them?? Also can my sculpee (oven bake) dry out in air?? Should i store my clay a certain way???

@RaisingNobles

2 жыл бұрын

you can absolutely bake them on another day. polymer clay doesn't actually dry out in the air, so you are good on that end. I do like to store my clay in a closed container, but it doesn't have to be completely air tight

Can I use a toaster oven? I don't want to turn on my large oven for tiny pieces.

@RaisingNobles

3 жыл бұрын

Yes as long as it holds a consistent temperature

275 c or F ?

Would it be best to use waxed or parchment paper for baking them.

@RaisingNobles

Жыл бұрын

Parchment

Hi with the buffing blocks what kind should it be ?

@RaisingNobles

2 жыл бұрын

a finer grit works best, hope that helps!

How thick do you make your earrings? I tried to make some but they broke when attempting to agg jump rings. TYIA

@RaisingNobles

2 жыл бұрын

about 2mm thick. them breaking may mean you need to condition your clay better before using it

@marygould8995

2 жыл бұрын

@@RaisingNobles have been trying to figure out 2mm which would equal 0.078 inch. Am I getting this wrong?

If my earrings are still bendable a little after taking them out do they need to cook longer

@RaisingNobles

2 жыл бұрын

No - that’s a good thing! Means you did it right!

Hi.. How many minutes you pre-heat the oven?

@RaisingNobles

3 жыл бұрын

I preheat the oven until my oven thermometer says it’s up to 275* Fahrenheit

Hi! I've read somewhere that baking clay is not cumulative. Like if u bake it on 15 and then another 15 it doesn't equal to 30. I'm all confused and frustrated as all of my pieces tend to snap when I try to bend test it :( I bake mine at 275 for 1 hr. I have this mini toaster oven that only goes for 30 mins long so after it bakes at 30 mins I go ahead and rotate it again for 30. Someone please help 😩

@RaisingNobles

3 жыл бұрын

What type of clay are you using? And are you using an oven thermometer to make sure that your toaster oven is at the right temperature the entire bake?

@heyseptember989

3 жыл бұрын

@@RaisingNobles hi, thank you for replying! I was using a local clay brand and recently changed into sculpey premo and souffle. If I go ahead and try to bend it hard enough it still snaps. Should that really happen?

@leahbernard5445

Жыл бұрын

@@heyseptember989 hey! It should not snap no matter how much you bend it! I’m still trying to figure out what they should feel like right when you take them out of the oven.

Actual baking instructions start at 3:10

@RaisingNobles

2 жыл бұрын

thanks!

How do you get your clay to bake flat? Sometimes mine come out with a curve.

@RaisingNobles

3 жыл бұрын

You can sandwich your clay between two ceramic tiles while baking and they will come out perfectly flat!

@jaymedavis2316

3 жыл бұрын

@@RaisingNobles Thank you!!

I have a oven thermometer , I've put my pieces on tile, and even put something on top for air bubbles. It looks fine going in, but once it's out, there are cracks and holes. Can you tell me what's going wrong? Thanks for your advice.

@RaisingNobles

3 жыл бұрын

Sounds like an issue with your clay. What type of clay are you using? And are you conditioning the clay?

@rebeccaeagle8718

3 жыл бұрын

@@RaisingNobles I am using sculpey premo and sculpey soufflé. I am conditioning, however, I don't if maybe I'm doing something wrong in the conditioning process. I read on line about tearing the clay instead of folding. Do you know anything about this technique? I have had three bad batches and I'm just starting out.

@alvaroarmando8404

3 жыл бұрын

pro tip : you can watch movies on Flixzone. I've been using them for watching a lot of movies during the lockdown.

@cannontoby7273

3 жыл бұрын

@Alvaro Armando Yup, I have been watching on Flixzone} for since november myself :)

@spencerelliot3991

3 жыл бұрын

@Alvaro Armando yup, I've been using flixzone} for since november myself =)

Why is my white clay turning dark in the oven

@RaisingNobles

3 жыл бұрын

Are you conditioning it properly? What brand is the clay?

@tashahayes1544

3 жыл бұрын

I use sculpy. How do you condition it?

@divyasuravarapu4567

3 жыл бұрын

@@tashahayes1544 You use the pasta machine or if you search up on amazon condition clay machine it will come up.

@lawyer4503

3 жыл бұрын

After true baking our clays should be soft or hard thnx a lot

My earrings are coming out soft even after baking at correct temp and long enough

@RaisingNobles

2 жыл бұрын

do they harden up after they cool?

How to bake a polymer clay without an oven??

@uchihadmali4885

3 жыл бұрын

You can use air drying clay instead, so you won't need an oven! :)

@RaisingNobles

2 жыл бұрын

you definitely need an oven for polymer clay

I've been making clay earrings recently, and none of my pieces really bend. They're hard, but most of the time they don't bend or break.. am I doing something wrong or should clay ALWAYS bend?

@RaisingNobles

2 жыл бұрын

Yes it should be flexible. What clay are you using?

@celinelisette222

2 жыл бұрын

@@RaisingNobles sculpey premo

@momzombie

2 жыл бұрын

I have the same problem. Still experimenting different (toaster) oven temps and thickness of clay. Tonight I had it on 225 for 15 minutes. For small stud pieces. I kinda think it depends on the thickness and size of the pieces being baked. At least it seems that way

I really love your technique’s but wayyyy to much self promotion.

@stephscream

Жыл бұрын

Yeah unfortunately it was almost the entire video. And I only clicked on this video because it was short haha

omg. Just spent 5 hours making clay and they burnt to a crisp within 5 minutes. Forgot that American's use Fahrenheit

@RaisingNobles

3 жыл бұрын

Oh noooo 😩😩

I just fried mine

Way to much light couldn’t see much

Should I keep both the oven rods on or any of top or bottom one off?

@RaisingNobles

3 жыл бұрын

My oven only has a top oven rod