Wife - No more hobbies!!! Me - Finds video on 3d Printing RC Airplanes :)

@TroyMcMillan

3 жыл бұрын

Wow I love this comment exactly. I am the same way for sure.

@mylesjarvis7571

3 жыл бұрын

@@TroyMcMillan Me too!! Now............3D printing is going to be another one....!

@fuupdaass275

3 жыл бұрын

Now find a new wife

@gregHePilots

3 жыл бұрын

@@fuupdaass275 lol you should have seen her face when I bought a 5ft high powered rocket...

@fuupdaass275

3 жыл бұрын

@@gregHePilots well yeah it gave her an idea of what to buy for herself lol.don't forget the batteries and have fun

Paint it with aluminum paint so the plastic doesn't break down from uv radiation, then put a nice coat of finish. Really cool

Your plane does not fly like a bird but swims like a fish. It's amazing.It does not pitch, does not shake, does not vibrate and remains as stable as a real plane.

Great build video, also very nic3 looking plane!,, Thanks for sharing with us!

You do realise that you, single handedly, are responsible for me spending lots of money on filaments 😐 However you are also responsible for me having lots of fun, learning lots and, producing some awsome planes 😁

@louwrenskoenraadschreurs6504

6 ай бұрын

What planes have you made?

@louwrenskoenraadschreurs6504

6 ай бұрын

And how much money does one plane cost you including motors and stuff

What a beautiful model of the Tucano. Crazy that it is 3D printed !

Fantástico! Parabéns por este trabalho com o Tucano.

Wow! That's cool, I wish I could have one.

Amazing! Thanks for share!

@TroyMcMillan

3 жыл бұрын

Thank you

The best tutorial / 3D plane build of all time. Great looking model. Thanks for sharing.

@TroyMcMillan

3 жыл бұрын

Thank you for the comment Jason. It takes a lot of hours and camera angles so I am thankful you are impressed with the video. Cheers

Very impressive. You make it look so achievable. I have been building planes for many years...so I know how skilled you are. Thanks.

I just got a 3d printer a few weeks ago and this is a major reason I got it. Thanks for the great information and tips

@TroyMcMillan

3 жыл бұрын

What kind of printer did you get? I bought my printer just for printing an airplane. 3D printed airplanes are so nice that all I have been using my printer for over the past year has been printing airplane parts or full airplanes. Have fun with your build. Let me know if I can help with anything. This Tucano is awesome I would highly recommend this build. It flies really good.

@elyodeel

3 жыл бұрын

@@TroyMcMillan I bought an Flsun qqs delta printer. I was warned about deltas and the issues they can have but I was so intrigued by the kinematics I bought one anyways. So far it has been excellent.

@TroyMcMillan

3 жыл бұрын

@@elyodeel Ya that looks like a nice printer auto bed leveling must be nice. Have fun with your build.

It is so hypnotic and satisfying to see all those parts fit together extremely well. I am a scratch builder myself and I sure appreciate when two distinct parts fit well without having to do extra work to finish the fit. Great work. Love from India. 👍🙏

amazing to see the full process, awesome dude!

Hi, great job! I looked with pleasure!

well done, flies really smooth

It's fantastic! You make me wanna try this someday.

Very cool!👌

@TroyMcMillan

3 жыл бұрын

Thank you

thankyou so much, im a long time flyer but have never 3D printed before, I really appreciate the help

THIS IS AMAZING! I have been hoping someone would design one soon! Thank you for sharing!

@TroyMcMillan

3 жыл бұрын

Thank you Riley, It is a fun plane.

What a sweet-looking plane.

Cara você e o melhor construtor que eu já vi 👏👏👏👏

This is so impressive. Your ability to resist ADD is pro level. I would have gotten off track immediately after the print! Super rad.

@TroyMcMillan

3 жыл бұрын

Thank you it is motivating to get it out to fly.

Amazing Job ! I looove the Look!!! 👍🏼🇦🇹✌🏼

Cool build. I used to see this aircraft regularly as it flew out of RAF Linton on Ouse. Decommissioned in 2019.

@TroyMcMillan

3 жыл бұрын

Wow that is so cool I really like the paint design and I haven't seen any RC versions. To see a real one would be awesome. Thank you for watching. Cheers

Nicely done

Beautiful rc aircraft. Nice Job

Awesome👍

That's so cool.

fantastic work and documentation

Excellent!

AMAZING!

Amazing work my friend. I love it. Thanks for postng and big salute from Slovenia, Pilot Robert

Good job!

Excellent well done .. More than like you deserve ..

Excellent job.

nice done,congrats

Amazing work, congratulations.

@TroyMcMillan

3 жыл бұрын

Thank you

Very enjoyable and interesting video. Nice job.

Belíssimo trabalho!! Parabéns pelo projeto. Grande abraço do Brasil!

@TroyMcMillan

3 жыл бұрын

Obrigado, torcida de Las Vegas

@digranni128

3 жыл бұрын

Que impressora impressionante kk

@cjsninojr

3 жыл бұрын

@@digranni128 E o projeto nem se fala kkk

AWESOME BUILD!

@TroyMcMillan

3 жыл бұрын

Thank you

Thank you, for post video!

This is an amazing build. I think I will dedicate the print hours to get my hands on this model. GREAT Video with clear and accurate instructions,, WELL DONE!!!!!

@TroyMcMillan

3 жыл бұрын

Thank you, This plane is well worth the print hours.

Very very very nice!!!!

Wow! You make it look so easy. Awesome job!

@TroyMcMillan

3 жыл бұрын

I have built quite a few 3D printed airplanes. But it is pretty easy to assemble them. Thank you cheers

Well done for the instruction in building the plane and the details for assembly step by step. Well done

@TroyMcMillan

3 жыл бұрын

Thank you

Very nice and I love the black and white spinner it reminds me of my grandads Scottish aviation Bulldog

@TroyMcMillan

3 жыл бұрын

Thank you for the comment. I love the spinner also. I did not go with the black and white safety strips on the propeller though. I thought it looked good without. Thank you for watching.

i am amased with the plane didnt know tha was possible thank you

Great build looks awesome.

@TroyMcMillan

3 жыл бұрын

Thank you Keith

This is AMAZING

@TroyMcMillan

3 жыл бұрын

Thank you

This is awesome 👍

Was one video and plane ... I definitely plane on printing this one .

@TroyMcMillan

3 жыл бұрын

This plane is definitely one of my favorites also. It flies and looks awesome. Good luck with your build cheers

WoW 🤩 NICE 👍🏻 👏👏👍🏻

Great model build and I also have to compliment the editing at 25:08 with the battery tray.

Great vid, thx for amazing content and detailed informations 🛩

@TroyMcMillan

3 жыл бұрын

Thank you

Interessant ,werde ich vieleicht nachbauen:-)

Great stuff buddy awsome, 👍

@TroyMcMillan

3 жыл бұрын

Thank you, Cheers

Very good

wow...great work sir

@TroyMcMillan

3 жыл бұрын

Thank you pewe

Troy cool 3d airplane

Thanks !

very good project

Very good.

Nice !

@TroyMcMillan

3 жыл бұрын

Thank you

Badazz is all I can say. Just ordered me a 3D printer cant keep paying hundreds of dollars for one plane when I can have a whole airfield lol thanks for the info!!! Dec. 2021 a whole year later!

Awesome build bro 🔥👍✌️

@TroyMcMillan

3 жыл бұрын

Thank you

nice project

Another great build video for another great PlanePrint plane. I may use oleo landing gear just to give it a bit of flex on landing.

@TroyMcMillan

3 жыл бұрын

Thank you David, Yes I was worried about the landing gear a bit also. The gear held up good for me. The wing design of the plane flies very good and on landing with no power it actually floats a lot so it is easy to have nice smooth landings. I don't think it needs oleo landing gear but it would be nice looking for sure. Have fun with your build.

Hallo super RC Tucano... du hast bald ein neuen Kunden ......super super

Very Very Nice

@TroyMcMillan

3 жыл бұрын

Thank you

Nice, cool project for my son and me

@TroyMcMillan

3 жыл бұрын

Ya this is an awesome build to work on. Have fun cheers

This is it! Im getting a hold of a 3dee printer in a near future! Those exhaust pipes ould be workin vents for the esc and motor if you made holes imo. Supernice build! Tight! Thanks!

@TroyMcMillan

3 жыл бұрын

Thank you

pretty fuckin cool you share all the details of this stuff-- I'm actually starting to consider printing a plane, where I wasn't interested before.

@TroyMcMillan

3 жыл бұрын

thank you! it is actually super easy to do, they look awesome and actually fly well too. Go for it!!

Nice build. Things have changed a lot. We used balsa and gas engines. That was very costly.

Good job

@TroyMcMillan

3 жыл бұрын

Thank you

Great build! Would love to see a spitfire project sometime, maybe one of the photo reconnaissance versions like PL983

very gratifying, to see a replica of the super toucan airplane that I help to manufacture in Brazil being perfectly done .... congratulations

@TroyMcMillan

3 жыл бұрын

Thank you

@Mepjc

2 жыл бұрын

@@TroyMcMillan This is a not so super Tucano made in Belfast, Northern Ireland! Did my third Tucano flight in ZF406 almost 20 years ago now - fantastic to see you making a model of it.

Hey Troy! Another great video! The one thing I want to say when cutting carbon tubes/rods is 1. Tape the tube at the cut and cut through the tape to avoid splintering of the carbon and helps keep the dust down. 2. Use a spray bottle with water in it and wet the carbon where you are going to cut it, this will eliminate any and all dust. I don't want you to get lung damage from the carbon in the air! Have fun!

@TroyMcMillan

3 жыл бұрын

Thank you for the tip, I will be sure to do that for the next build.

@j.q.higgins2245

11 ай бұрын

Exactly! For the same reason, It's not a good idea to use carbon tubes or rods in a drill to clean out the wing tubes.

also, i dunno anything about this hobby really, i just have a 3d printer (mines much to small to print this i would need to scale it down into a mini airplane and stick tiny motors and servos in it) but i just want to say this video is super helpful and very detailed and i appreciate the effort that went into it, it's made me want to look into this entire 3d printed rc plane thing more, thanks!

Great dude so cool i cant afford to do anything like that but if i could i would.

Very good job ..... bravo !!!!!! Stéphane de France

@TroyMcMillan

3 жыл бұрын

Thank you Stephane Cheers

Very COOL Troy! Im a ROOKIE To 3D Printing, but have been somewhat successful in the 2 weeks I have owned my ENDER 3 PRO! You have showed me lotsa cool stuff, Hopefully one day I will try to 3D Print a Plane!! Peace- Capt. Nicky G.

Mate, you deserve way more subscribers. You made this look way too easy. Would love to see you take on B2 bomber :D

Hi, Troy. Congrats for the awesome design of our most dear airplane Tucano. Do I need to check supports to print these parts? Thanks from Brazil. I am already printing mine!

@TroyMcMillan

3 жыл бұрын

It is a great plane! No I didn't use supports for any of the parts!

Great build...... great edit!

@websitesthatneedanem

3 жыл бұрын

25:06 - Cool trick! 😆

@TroyMcMillan

3 жыл бұрын

Thank you

Hi Troy, you have again managed a great video! Thanks a lot for this ...

@TroyMcMillan

3 жыл бұрын

Thank you, This plane turned out so amazing. Thank you for an awesome design. This plane flies so good. I will be having fun with this plane for years.

How long have ppl been making RC models like this? What an incredible looking Tucson and it flies very decent.

This plane is sooo nice ! I would love to see a Dh98 Mosquito or a P38 lightning

It ’s very nice. I want that aircraft.

Perfect perfect perfect

Que buen proyecto

Great video. Look like a lot of fun. I’m setting up my Workshop what 3D printer is recommended for prints like this.

Black pla in the sun , good luck with that

@TroyMcMillan

3 жыл бұрын

Yep. Lol. I just fly early in the morning and keep it parked in a little shade though and it works out fine

super make

QUE AVIÃO DEMAIS CARA! Greetings from Brazil

@TroyMcMillan

3 жыл бұрын

Thank you

@brooksricardo7955

2 жыл бұрын

I guess Im randomly asking but does anybody know of a way to get back into an instagram account?? I was dumb lost my account password. I would appreciate any assistance you can offer me!

@dantevalentin4395

2 жыл бұрын

@Brooks Ricardo instablaster ;)

@brooksricardo7955

2 жыл бұрын

@Dante Valentin I really appreciate your reply. I got to the site thru google and Im waiting for the hacking stuff now. Takes a while so I will get back to you later when my account password hopefully is recovered.

@brooksricardo7955

2 жыл бұрын

@Dante Valentin it worked and I finally got access to my account again. Im so happy:D Thanks so much, you saved my account :D

nice

awesome build Troy! A few questions though - did you ever have any issues with the control horns being 3d printed and super glued to the aileron? This usually worries me the most - layer adhesion on thin parts. Also, how does it hold up in the summer since it's all black and thin-walled?

U r amazing

Amazing.... how much does this guy cost to make with all parts, files, and bits? Great work as always!

Love It and subscribe 🤩