I actually was able to take the piece off without taking out the screws, but I had to pull the piece apart, and had to take out all the screws anyway to clean the cube lol. But I really like how you mentioned to beware of losing pieces.i did a couple turns before tightening down my cube today, and it literally exploded 🤣 🤦‍♂️ but luckily no peices were lost in the process.

@leeleecuber

2 жыл бұрын

Lol rip cube. Regarding why I said you should take out the screw, it’s because to set it up you take it out anyway but even if I wasn’t trying to set it up I would still take out the screw to make it easier. :)

@tjzero0008

2 жыл бұрын

Right, I figured that out the hard way 😆 or should I say, the hardware way! LOL

@leeleecuber

2 жыл бұрын

@@tjzero0008 LOL :)

@Duck12239

8 ай бұрын

lol smae

@rickfairweather8426

3 ай бұрын

😅​@@leeleecuber

I cannot express how thankful I am for this video. Of course I decided to twist some corners on an already solved 2x2. Then a corner came off, and I tried to fix it, but could not. I didn't want to disassemble the entire thing so I just tried to do the last layer. I was able to fix it, but the turning was all over the place. I finally caved in and disassembled it. I was weary about it working if I did manage to reassemble it, and after a few failed attempts (which were my fault), I finally fixed it! Thanks so much, it even turns nicer than before!

@leeleecuber

5 ай бұрын

Thank you for your support! I’m glad I could help :)

thank you so much, my 2x2 popped out of no where and when I somehow assembled it, it was turning SO MUCH WORSE, with your video I managed to take it apart again and assamble it again and it works just like it was before. thank you.

@adamchaar3906

29 күн бұрын

Jhlgjhkvhjfkhjfkjhfkhjkfhkjfhjfkjhfkhjfkkhjffjgkgjkfjkgf

Thank you so much man I took it apart for cleaning and forgot how to put it back in this really helped me a lot man than you😊

@leeleecuber

Жыл бұрын

No problem:)

thanks man hahahh 2x2 is just like a puzzle when assembling it after cleaning but its fun after i know this

thank you so much man, i popped all of my 2x2 i was scared i could not get it back but well yes i did because of your help :)

@leeleecuber

Жыл бұрын

Glad I could help :)

My only 2x2 popped and this really helped! Thanks🙏

@leeleecuber

Жыл бұрын

I’m glad I could help bro :)

bro thank you so much when it popped i thought i was gonna have to get a new one🙏

@leeleecuber

Жыл бұрын

Ur welcome:)

Thank you so much I really needed this and I had no idea how to solve this the pieces kicked on getting jammed and I didn’t know what to do and then I seen your video so thank you so much for helping me

@leeleecuber

4 ай бұрын

No problem

My cube has been saved thank you I really don’t know how I got the main piece out when I was trying to put my cube back together I was concerned about it not turning right you have saved me thank you 🙏🏾 😊

@leeleecuber

5 ай бұрын

No problem

Before it was harded to assembled my cube but after watch this vidioe I assembled it easily.Thank you! This vidioe is important❤️‍🔥😊

@leeleecuber

Жыл бұрын

Glad I could help :)

You see all of your followers comments and react to them or answer their questions. Your one of the only youtubers i know who does that. Good support to all your fans and followers. 👍👍👍

@leeleecuber

28 күн бұрын

Thank you

That voice tho. Bro sounds like Darth Vader. 💀

@leeleecuber

7 ай бұрын

lmao

@labheshs

4 ай бұрын

Funny

That u so much my cube was fully broken and yiu helped thanks

@leeleecuber

7 ай бұрын

glad i helped :)

Assembling a 2 by 2 is harder than assembling a 3 by 3 for me

@leeleecuber

2 жыл бұрын

It’s pretty much the same difficulty but if it is it is understandable:)

@KTCEditzz

2 жыл бұрын

Yes

@leeleecuber

2 жыл бұрын

@@KTCEditzz indeed

does this work on all 2x2 rubix cube ?

My 2x2 was not in shape for years and now I assembled it 😊 This is my luckiest summer vacation ever 😅 I got me 2x2 back to normal a new gear cube as a gift from my uncle and mirror blocks given by my father

@leeleecuber

11 ай бұрын

Nice bro

I got everything but the last corner piece, the edges keep inverting inwards

@leeleecuber

Жыл бұрын

U can loosen it a bit :)

Thanks, bro! It's been a while since my 2x2 was broken, and the first corner pieces... well, I was about to cut the thingy on them... fortunately, tough, I didn't! Thank you very much!

@leeleecuber

10 ай бұрын

You’re welcome:)

Thank you so much for this video! I needed it!

@leeleecuber

5 ай бұрын

No problem

Yes! You fixed my cube for me! Thank you!!

@leeleecuber

Ай бұрын

No problem

My YuXin little magic v2 has a very weird corner and since I disassembled it completely I can’t put the core piece back. I tried putting it first but that piece is very weird because I can’t have this piece in the cube without removing some edges. Can you help me?

@leeleecuber

8 ай бұрын

You’re either putting it in wrong, or the piece is broken. Kind of ur call you’re gunna have to figure it out.

@spystoudios

8 ай бұрын

@@leeleecuber I know but the piece is like that it is not made for the cube since if you try to put the edges to see their contact there is no part that they seem to do so. Maybe I’ll have to get a new 2x2. Who knows. Thank you for your response !

@leeleecuber

8 ай бұрын

@@spystoudios if it was like that originally and you didn’t put a different cubes piece in it then it belongs in that cube. Maybe try loosening the cube then trying again. U might be having a problem just assembling the last piece which is very common.

@spystoudios

8 ай бұрын

I did it! It was just the fact that I had to put the edges in a very specific way but yeah it works fine but it turns horribly so I will still buy a new cube but thank you !

@DailyPollsDaily

7 ай бұрын

Can u tell me what specific way since I can’t put the last piece in since it has these weird parts on it that blocks it from going in

I have 3 pieces with the locking tabs. I watched your video many times, and cant figure out where you placed them. Please advise. My cube is locked due to misplacement. Thanks

@leeleecuber

Жыл бұрын

There will be holes underneath the centers that they need to slide in. And if your cube is locked you can just take it apart again:) hope that helps

@leeleecuber

Жыл бұрын

@@holoholevictim7876 sorry I don’t understand your question

@Fossilpump9080

8 ай бұрын

@@leeleecuber CAN YOU PLEASE MAKE A VID

Thank you so much I thought I was never going to get mine back together

@leeleecuber

Жыл бұрын

Yw :)

Thanks bro this helped a lot bcuz I fully disassembled to change the color scheme

@leeleecuber

Жыл бұрын

nOO WHY!?!?! Why change the Color scheme…..

@forsy_reborn

Жыл бұрын

@@leeleecuber I’m sorry it just feels right with a different color scheme

@leeleecuber

Жыл бұрын

@@forsy_reborn nOoo

@forsy_reborn

Жыл бұрын

@@leeleecuber I’m sorry

@leeleecuber

Жыл бұрын

@@forsy_reborn :(

TYSM❤❤❤ I fixed my 2x2!!!

thanks I had to superglue one of my pieces and this guide helped me fix it after I pulled it out

@leeleecuber

Жыл бұрын

Glad I could help :)

Thank u so much man it helped a lot

@leeleecuber

Жыл бұрын

Glad it helped

I dont know if i can do it . The first piece i put in always aglines wrong or wierd with the cube

@leeleecuber

4 ай бұрын

Keep trying and following the vid, you’ll get it.

@moritzz16

4 ай бұрын

Ok thanks

@moritzz16

4 ай бұрын

I did it with my brother. I did it but its we noticed a piece was broken rip 30 bucks cube and I almost can do EG 1 And EG 2 and so on The broken piece was also the reason why i wanted to take it apart and put it back together. But the piece was broken since the beginning Anyways thanks for the tutorial

hey thanks for the vid Uhm i was done assembling it and it keeps like popping in the inside when i turn the cube (like after 20 seconds)of putting it down it just keeps popping in the inside like it keeps dislocating the Edges can you please explain why?

@leeleecuber

2 ай бұрын

U probably assembled it wrong, check all the edges

@Coco_1818

2 ай бұрын

I did everything that is on your vid and the side of the cube keeps like getting jammed like it's lifting the bottom edge piece how do I fix that

can any edge be placed in the original place?

@leeleecuber

2 ай бұрын

No, there are 3 edges with specific differences from the other edges, those 3 are meant to be the originals.

One edge fell out and I thought that you would put an edge in last. It helped.

@leeleecuber

Жыл бұрын

Glad I could help :)

@madhusharma4184

2 ай бұрын

Blabla

@madhusharma4184

2 ай бұрын

Bcggg

thanks leelee buddy

tip: if u cant get the last corner piece in take out the thing that separates them put the 2 corners in together and then push them in opposite directions and put in the piece again.

Im stuck on the cube assembly i have two black things left

@leeleecuber

Жыл бұрын

?

I can't asemble the last corner

@leeleecuber

Жыл бұрын

Loosen the cube a bit :)

I have a problem where the bottom layer can turn but the others wont, like theres something blocking it from turning. Can someone please help me? 😭

@leeleecuber

10 ай бұрын

U probably assembled the cube wrong, re do the whole thing

Do 1x1 next

Thank you sm i was trying to fix it but it was weird and kept breaking again ty so much

@leeleecuber

Жыл бұрын

No problem:)

When I reassembles it, it was stiff as, just loosened it and added springs

@leeleecuber

Жыл бұрын

Nice

What cube is this called

@leeleecuber

Жыл бұрын

Yjmgc

I was watching this video with earphones so the first thing I notice is the voice quality is satisfying

@leeleecuber

2 жыл бұрын

Thanks, glad u liked it :)

my cube keeps popping and i just cant get the last piece :{ and I just got it today .😭

@leeleecuber

Жыл бұрын

Dw, tighten it at the end and have patience:)

I can’t put the last piece in becuz the Yukon corner has this weird piece that blocks it from going in

@leeleecuber

7 ай бұрын

Maybe it’s too tight

@DailyPollsDaily

7 ай бұрын

*Yuxin

somehow my 2x2 had no original center peice and i was able to take all the peices out easily.🤔🤔🤔

@leeleecuber

3 ай бұрын

Huh weird

Mine is a nex cube i tried assembling it but it literally the whole frame broke into 100 pieces 😢

@jiahaowang1991

Жыл бұрын

I hurt my thumb.

@leeleecuber

Жыл бұрын

You’ll get it just keep trying :)

My one all the corners can be removed??

@leeleecuber

2 жыл бұрын

yes all the corners can be removed however it is easier to take out one of the centers and just put it back on :D

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber nooo without taking any spings or others out

@leeleecuber

2 жыл бұрын

@@speedcuberwithnicevedios hmm

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber really

@leeleecuber

2 жыл бұрын

@@speedcuberwithnicevedios hmmmmmmm

Hi, my cube is weipo wrs. Thanks for the video . I can't place the last corner piece. When i try to place it, second layer is popped. I tried to place edge pieces, but at this cube, i can't place edge pieces. Can you help? I'll edit this comment if i did it. Edit: i placed the edges but i can't place the last corner. Second edit : i placed the pieces but when i turn the cube i am having a click sound and cube was so slow

@leeleecuber

Ай бұрын

If the cube is slow that’s likely an indication that you messed up assembling the edges.

@ALIMOFICCIAL

Ай бұрын

@@leeleecuber i gonna try it

@ALIMOFICCIAL

Ай бұрын

I did it And it was better. Just 1 edge is feeeling slow

@leeleecuber

Ай бұрын

@@ALIMOFICCIAL either a manufacturing error, or u put it in wrong, or it’s not lubed

@ALIMOFICCIAL

Ай бұрын

@leeleecuber I can't put the last corner like you. It can happen from my placing method. I placed last 2 corners without any edge, and then I am placing the last edge by loosing and stretching it.And i am having this problem. If when I try to put it like you the edges are popping out.

Help i cant put the last piece

@leeleecuber

11 ай бұрын

Try loosening

My rubiks brand cube broke and I tried assembling it but the last corner wouldn't budge

@leeleecuber

Жыл бұрын

Rip :(

@mulqitsani

Күн бұрын

Same

:( the ball inside the cube just keeps truning when i turn a piece and wont stayin place pls help 😭

@leeleecuber

10 ай бұрын

I don’t know what ball you are talking about bro u need to specify

@migsplayz472

10 ай бұрын

Nvm bro I just put the fixed pieces in the wrong place

@leeleecuber

10 ай бұрын

@@migsplayz472 lol

@labheshs

4 ай бұрын

Lol

Sir mine all edges are ssmr

@leeleecuber

Жыл бұрын

?

*Bro thanks it help me😇*

@leeleecuber

11 ай бұрын

Np glad I helped :)

assemble 1x1 cube next

@leeleecuber

7 күн бұрын

Fr

Thanks 😊

@leeleecuber

Жыл бұрын

Glad I could help :)

Is it just me or are yj screws sooooo fragile? If you unscrew your Yj cube too much, the hole in your screwhead where you put the screwdriver, that hole will start to erode. The screws in my mgc elite2 are almost eroded to the point where I can’t unscrew them out, so I’m probably going to order some spare screws from scs since it’s cheap there.

@leeleecuber

2 жыл бұрын

Idk man mine are fine maybe u got a defect in urs. I hope u get it fixed :)

@elementballs

2 жыл бұрын

bruh this literally happened with my yj mgc 4x4

@leeleecuber

2 жыл бұрын

@@elementballs dang rip cube :(

@Seweyy23

2 жыл бұрын

I forgot to tell you but it has happened to my Mgc square-1 and now the screw is stuck in my square-1 forever :(

@leeleecuber

2 жыл бұрын

@@Seweyy23 sad :( I will be unboxing that cube actually soon. I ordered it on June 19 on pre order. Still out of stock :(

Thank you very very much. I thought i will be sad forever :)

@leeleecuber

Жыл бұрын

your welcome :)

THANK YOUU

@leeleecuber

9 ай бұрын

Your welcome

Last step - push agressively - cube is now broken!

@leeleecuber

4 ай бұрын

Sounds like a skill issue

At the end i forgot to tight the screws

@leeleecuber

Жыл бұрын

Then do it lol

why do i have 3 of the wierd edges

@leeleecuber

Жыл бұрын

U put them between 3 centers with the starting corner in the middle

@haoyihor264

Жыл бұрын

Oh ok thank you it worked 😀😀😀

@leeleecuber

Жыл бұрын

@@haoyihor264 np :)

Mera rubick cube kuch aalg he me use kese solve kru uske h peice black colour ke he or bo muse kese jodne he pta nhi chal rha he

@leeleecuber

Жыл бұрын

So much agreement

@pritamchand1555

Жыл бұрын

@@leeleecuber ye cube mene messho se order kiya tha

@pritamchand1555

Жыл бұрын

Ye uska link he

@pritamchand1555

Жыл бұрын

Please muse btao ki me 2x2 Rubicks cube ko kese jodu

Nice voice bro

Bro I’m never gonna be able to fix mine it’s only one piece have not had it for 30 minutes and my brother broke it

@leeleecuber

Жыл бұрын

I’m sorry to hear that, if u get a replacement piece make sure before you put it in you loosen the cube :)

@landofchugs2980

Жыл бұрын

@@leeleecuber well I order it on Amazon so it came with nothing I’ve been trying forever nothing worked

@landofchugs2980

Жыл бұрын

@@leeleecuber found the problem. He took a PIECE off, not a part of the cube that’s why. So I’m guessing it’s un fixable

@leeleecuber

Жыл бұрын

@@landofchugs2980 nice

The last corner required me a chopstick to asemble it

@leeleecuber

9 ай бұрын

Lol nice

4:15 Instructions unclear, my Rubik's cube is now shattered. also there's a hammer stuck inside my floor

@leeleecuber

Ай бұрын

💀

@EmpireOfFedoras

Ай бұрын

@@leeleecuber do you have a tutorial on how to assemble the pieces back together? 🙃

My piece break😭

@leeleecuber

8 ай бұрын

Rip

@Chair_On_Water

2 ай бұрын

Same

Tengo LAS Uñas cortas no puedo romper

@leeleecuber

Жыл бұрын

If only I understood

I finally fixed a cube that friend just bought it and broke it 😀😀

@leeleecuber

11 ай бұрын

Nice

bros been vaping since 1999

@leeleecuber

7 ай бұрын

I haven’t touched a vape or cigarette in my life

😭 I cant do step one and My cube cost 100 dollars.. 😭😭

@leeleecuber

Жыл бұрын

Nah you can u gotta keep with it man Dw u will get it.

Thank

@leeleecuber

Жыл бұрын

You’re

I know a nxn cube that you cant show an assembly tutorial on.... A 0x0 cube

@leeleecuber

2 жыл бұрын

I will now be proving you wrong. :)

@gabrielbowman1267

2 жыл бұрын

Lol

@leeleecuber

2 жыл бұрын

@@gabrielbowman1267 lol indeed

I tried to do it and I broke it bruh

@leeleecuber

7 ай бұрын

Rip

My that last piece got offffffff😢 Aaaahhhhhhhaa

I've been struggling with assembling a 0.000000001x0.000000001 Rubik's cube, could you make a tutorial on how to?

@leeleecuber

2 жыл бұрын

U just eat it :)

@cubingwithsoyaib261

2 жыл бұрын

@@leeleecuber 😂

@leeleecuber

2 жыл бұрын

@@cubingwithsoyaib261 lol :)

@cubingwithsoyaib261

2 жыл бұрын

@@leeleecuber bro iam still laughing i don't know why 😂😂😂🤣🤣🤣🤣🤣

@leeleecuber

2 жыл бұрын

@@cubingwithsoyaib261 lolllll

TOO EASY! 😉

@leeleecuber

9 ай бұрын

Ok

2 by 2 avg?

@leeleecuber

2 жыл бұрын

Like sub 5 :)

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber wow can we battle?

@speedcuberwithnicevedios

2 жыл бұрын

Lol

@leeleecuber

2 жыл бұрын

@@speedcuberwithnicevedios idk how we would do that:)

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber hmmm i think like you send me a Ao5 so i can make a vedio on that adding yours and mine and you can add mines to yours and make a vedio can we?

Tge last piece stem broke while i was trying to put it back in 🙃

@leeleecuber

Жыл бұрын

Rip :(

@user-lp1eh6fx7t

Жыл бұрын

@@leeleecuber ah its ok it as an rs2m evolution whitch is 10 bucks so its not a big deal. The big deal is that i compete in 2 weeks so lets hope my new one arrives on time

@leeleecuber

Жыл бұрын

@@user-lp1eh6fx7t hopefully

Fun fact -In hindi leelee means take my

Thanks my cube broke open and i could not fix i by myself❤

@leeleecuber

Жыл бұрын

np gald i could help :)

The last piece is very hard

@leeleecuber

8 ай бұрын

Yes

Thaanks

@leeleecuber

2 жыл бұрын

No problem glad I could help:)

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber :)

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber can you make a vedio on how to assemble a 1 by 1 please ? My 1 by 1 popped out while ago but couldn't assemble it :(

@leeleecuber

2 жыл бұрын

@@speedcuberwithnicevedios relatable

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber ?

My guys depressed

@leeleecuber

8 ай бұрын

lmao what makes u say that

My is the moyu cube tho

@leeleecuber

11 ай бұрын

K

Min did not work

@leeleecuber

Жыл бұрын

It takes patience:)

My brothers whole cube fell apart lol

@leeleecuber

11 ай бұрын

Rip

Ok

@leeleecuber

Жыл бұрын

Ok

Lmao my ipad has wireless charging now it malfunctioned and said it was charging

@leeleecuber

Жыл бұрын

Lol

Idk😊

Actually I did it right my mom said she would punish me but when i searched i did it🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉its

I still can’t figure out how to put the last one in I’m so frustrated

@leeleecuber

Жыл бұрын

Make sure it’s loose :)

the only hard part about this is taking the first piece off and putting the last piece back on

@leeleecuber

Жыл бұрын

yep it takes patience :)

@guiderex2514

11 ай бұрын

i've been trying to pop the last piece in for 2 hours now (goliath nexcube 2x2) lol it hurts so much

@leeleecuber

11 ай бұрын

@@guiderex2514 u will get it bro :)

@guiderex2514

11 ай бұрын

@@leeleecuber thank you so much man, a good 30 seconds after reading this i get it in :) thanks so much dude, this is my only good 2x2. :D

@leeleecuber

11 ай бұрын

@@guiderex2514 lol np

My dad is going to kill me

@leeleecuber

7 ай бұрын

That’s not good

@Coolomemes

7 ай бұрын

Bro just kidding i am not dead

@Coolomemes

7 ай бұрын

You are very useful

@Coolomemes

7 ай бұрын

You made me alive

🤔🤷

@leeleecuber

7 ай бұрын

🤷‍♂️

Are you sponsered?

@speedcuberwithnicevedios

2 жыл бұрын

Can i sponser you? lol

@leeleecuber

2 жыл бұрын

@@speedcuberwithnicevedios lol I’m not sponsored :)

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber ok :) But you are gonna get Sooooooooooon...

@leeleecuber

2 жыл бұрын

@@speedcuberwithnicevedios I mean, I wouldn’t know :)

@speedcuberwithnicevedios

2 жыл бұрын

@@leeleecuber yeah i know you don't know

The last piece is impossible ff

@leeleecuber

6 күн бұрын

Just keep trying you’ll get it

@DaveClassic

6 күн бұрын

@@leeleecuber my dad tried and I had to broke all the piece again

@leeleecuber

6 күн бұрын

@@DaveClassic it was likely too tight

@DaveClassic

6 күн бұрын

@@leeleecuber well my dad did all piece, try to turn it is impossible

@leeleecuber

6 күн бұрын

@@DaveClassic well yea, you said he broke it

Not very clear. Edit: pay abit more attention in the video, then it'll be clear.

@leeleecuber

Ай бұрын

Make sure to calculate the Derivative

@touhouenjoyer-qq3vj

Ай бұрын

@@leeleecuber oh ok, now it gets clear, ty.

next assemble a 0.1x0.1 Rubik's cube

@leeleecuber

2 жыл бұрын

no :D

@Pixegonal

Жыл бұрын

@@leeleecuberpls

@leeleecuber

Жыл бұрын

@@Pixegonal lmao

@AsrielsBro

Жыл бұрын

​@@leeleecuberD:

@leeleecuber

Жыл бұрын

@@AsrielsBro never

This makes no sense 💀

@leeleecuber

7 ай бұрын

Maybe ur cube is too tight