How to Apply Walnut Wood Veneer to a Desk Top
Тәжірибелік нұсқаулар және стиль
Testing my veneering skills on my desktop. I used a paper thin walnut veneer to cover my old MDF desktops which were always temporary. Finished with an oil stain and lacquer finish coat.
Пікірлер: 40
"The other old guy"...so funny. I like the trick with the pvc.
@OldGuyWoodworks
2 жыл бұрын
Glad you liked it. He helped me in my most recent video as well. kzread.info/dash/bejne/Y6h_1smnnNS1hdY.html
Not only a super helpful video for my project but highly entertaining 😆. thanks!
@OldGuyWoodworks
2 жыл бұрын
Glad it was helpful! My most recent video is on formica veneer which features both old guys again. kzread.info/dash/bejne/Y6h_1smnnNS1hdY.html . Thanks for watching.
Other old guy was clutch
@OldGuyWoodworks
4 жыл бұрын
He has his uses. Thanks for watching.
Lol, "The old guy". love it.
@OldGuyWoodworks
2 жыл бұрын
He is older than me. lol
Nice top. I’m restoring an old antique vanity that belonged to my great grandmother. I was thinking bout doing this to the top also with walnut. Could you list all the finishes and sealers that you used?
@OldGuyWoodworks
2 жыл бұрын
I used a Minwax oil stain for color. Sherwin-Williams vinyl sealer for sanding and finished off with a Sherwin Williams lacquer.
I plan on doing a very similar veneer with walnut on MDF. Was wondering how your desk has held up so far?
@OldGuyWoodworks
4 жыл бұрын
It has held up well. I have no complaints and will do it again someday. Thanks for watching.
Thanks for the video. Very informative and encouraging for me to try a veneer project. It looks beautiful. Are these 2 different types of veneer? Looks like those two table tops have different pattern and color. Is it the veneer or may be just the lighting and video shows different results?
@OldGuyWoodworks
3 жыл бұрын
It must be lighting or a slight variation in grain. They came off the same roll. Thanks for watching.
You make that look so easy. I was planning on doing this to remake a top for my wife's industrial sewing machine. So, following your process, would you recommend cutting out the hole for the machine first or doing the veneer first and then cutting out the hole?
@OldGuyWoodworks
2 жыл бұрын
I would do one large piece and use a trim router to cut the whole out. Thanks for watching. (It's not that hard to be honest, but it is unforgiving once the piece is down).
Should the iron be used when using either the contact cement or wood glue? Also, would you recommend the contact cement over wood glue for adhesion?
@OldGuyWoodworks
2 жыл бұрын
Contact cement is much faster and gives great adhesion. Regular wood glue would be much more forgiving when applying to the surface. You would need an extensive hold down system or vacuum bag.
hi, so I should put the cement on and wait 15 mins before putting on the veneer? does it need to dry completely or only dry to be tacky?
@OldGuyWoodworks
3 жыл бұрын
I just wait 15 minutes and apply. It doesn't seem to be tacky or dry and you wouldn't think it would bond at all, but it does. It's critical to put the pipes down because once it makes contact, it's not moving. I guess that's why they call it contact cement.
Nice job⭐️⭐️⭐️⭐️⭐️
@OldGuyWoodworks
Жыл бұрын
Thank you 🤗 and thanks for watching.
Excellent video and a great job that was well done. May I ask where you got veneer sheets that wide? The widest i have found are only10-12 inches. Length is not an issue.
@OldGuyWoodworks
3 жыл бұрын
I bought mine online from www.woodworkerssource.com. I'm not sure if that's the best price or not, but they are convenient. Thanks for watching.
What is your preferred brand of contact cement?
@OldGuyWoodworks
3 жыл бұрын
I don't usually do a lot of veneering, so I don't really have a favorite. The one I used here is from Lowe's and it does a good job. Thanks for watching.
Beautiful. Any opinion on paper-backed vs self-stick veneers re durability ?
@OldGuyWoodworks
2 жыл бұрын
I've never used self stick, but I would be afraid of its lack of adhesion over a period of time. Like self adhesive edge banding. That stuff sucks. Thanks for watching.
@JohnLoMonaco
2 жыл бұрын
@@OldGuyWoodworks thank you
how are you able to spray lacquer without a respirator?
@OldGuyWoodworks
2 жыл бұрын
Because I'm brain dead. I definitely should have been wearing a respirator. That was a couple years ago when I was younger and more foolish. Thanks for watching and keeping me honest.
Can I vinyl seal it without the stain?
@OldGuyWoodworks
2 жыл бұрын
Absolutely. I do it to bring out some depth in the walnut.
Is the veneer 10mil or 22mil?
@OldGuyWoodworks
11 ай бұрын
It's 1/42nd of an inch paper back.
What is the ciment used?
@OldGuyWoodworks
2 жыл бұрын
It was a standard contact cement. I believe the brand was "Weldwood".
@Maria-sz1fc
2 жыл бұрын
Old Guy Woodworks thank you for your repply. i want to put veneer in a 60x120 table that curves on each end. Do you think that can be done with zero special equipment?
other old guy HAHAAH IM SCREAMIIING
@OldGuyWoodworks
2 жыл бұрын
I'm glad you enjoyed. Thanks for watching.