Thanks for taking the time to make this video, it was a real help. Got an SE Custom a couple a weeks ago (used) from Reverb and have been fighting with this problem ever since. PRS web site wasn’t any help and neither was PRS support who wrote send it in for repair naturally at a premium price. Nowhere in the PRS specs is it stated how much clearance the screws should have. Must be some sort of secret handshake thing I would imagine. Thanks again, you’ve solved my dilemma.

I just bought the Carlos Santana double cut SE, can't wait to get it. I have purchased the PRS screws for a couple Strats/Super Strats (Kramer Baretta Specials) and they work fantastic. ANYONE who has a strat style bridge with 6 screws benefits from these PRS screws. It helps with tuning stability and the feel of the trem, and floatabikity. Huge win.

Thanks for this video. I picked up a used custom 24 SE and I couldn't get it to stay in tune. Set it up per your instructions and the trem works great and it stays in tune perfectly!

@vaiisking

Жыл бұрын

Glad it helped you :)

That's brilliant :) just got an PRS for the first time and it was bugging me a lot :)

Thanks a lot for sharing you knowledge!

According to Prs support , Adjust the claw screws about 1/4 turn at a time until the bridge floats parallel to the strings and about 1/16th off the body , that 1,6 mm.

awesome. great job. looking forward to trying this

Great video thanks, just got my first PRS, not a fan of the screws direct into the wood as they and the wood will weaken over time. I guess he did it for sustain but I prefer the modern 2 pin strat into the 2 steel sockets as these can be adjusted metal on metal as opposed to metal on wood, there's only one winner over time and it ain't the wood which being the body is fundamental to the instrument

Thanks friend. I like the Saddle Savers. 😁👍

Thanks man, gonna try this

Many thanks for the video!

If you need to adjust the screws on your PRS trem this is how you do it.Using a 2 1/2 mm allen wrench as a feeler gauge (the flat side) it should be a slight drag,I've found it's best to tighten down and then loosen, to find the correct height and get the screws exactly even with each other. Don't forget to remove strings(put a piece of cardboard under the rear of the bridge),and trem springs before you adjust and when finished (springs and strings back in place and in tune) the bridge should be about 1 1/2 mm floating off the body front and back.Good job...

@Chuchuguitar

5 ай бұрын

But that's not what the PRS tech says, about the distance between the bottom of the bridge and the body. kzread.info/dash/bejne/n2mmrs6ehc-7eLQ.htmlsi=bg3Fq1SyDOYfKtP4

@gwr1954

5 ай бұрын

@@Chuchuguitarthe tech said about 1/16 off the body which is the same as 1 1/2 mm as long as its the same front and back and level with the strings...

Hi. Thanks for video. Good in terms of how to adjust those 6 tremolo screws, most people don't relax both string and spring tension. Easy way to ruin the knife edges by not eliminating the tension completely. Relating to the noise you are hearing I think it's mechanical coming from the strings above the nut and from the tremolo. Try placing velco around the strings between the nut and the tuners (or tie a sock around if you want to test it quickly), and place paper, foam, rubber whatever you think is easiest for you inside the tremolo springs, then try again and see if those high frequencies are reduced or eliminated. Regards.

@vaiisking

2 жыл бұрын

I’ll try those things as soon as my hand heals and I can play again, thank you.

You can use a Popsicle stick and put it under the back of your tremolo under it and then restring it with the same strings and it should bring you right back to where. Hope this helps.

@vaiisking

6 ай бұрын

much appreciated

Good on you to make this...the guy who invented this bridge has a video but it's hard to find

I have to try this... :-) thanks

Thank you so very much

Just picked up a CE and I've had strat trems and Floyd's, but wasn't to sure about this, so thanks for the info. Subscribed 👍

Thats a gorgeous PRS. Sorry if youve answered this already, what bridge have you upgraded that to?

@vaiisking

Жыл бұрын

Thanks for the compliment! The bridge is stock but the saddles were updated to graphtech (as well as the locking tuners)

Although I did put an allen of 2.5mm underneath to measure it, after tuning the guitar and adjust the springs for the tremolo to be parallel to the body, the tremolo seats only almost 1 mm above the body..? Any thoughts? It's a CE24 2007.

@vaiisking

Жыл бұрын

No, my expertise is minimal at best for this. The manns video that showed me this technique might link you to other helpful ones. See the description for that link.

@theforgedone

Жыл бұрын

Did you find a solution? I also tried Mann's video and ended up with a similar situation

@MultiVg13

Жыл бұрын

@@theforgedone nope I left it like that. I guess if you want more backwards move of the tremolo you have to go further more than the 2.5mm but then if you are a low string action type like me, consider that going more high, I mean the tremolo off the body, you are limiting the string height because even if the string saddles are set to all the way down, you re not going to have some low or very low action which I want fot the CE24, because of the more floating tremolo off the body. Cheers.

@AndyK.23

Жыл бұрын

At some point in the Mann video, he says the bridge should be about 1/16th inch above the body. But, he also says that's ballpark, and if you need to raise or lower the 6 screws to get the bridge to float properly, you can do that. I would try a 3mm allen as a feeler, and see if that half MM makes the bride sit at a better height.

If your action was a touch too high, should you lower each of these 6 screws equally or adjust all the saddles one at a time?

@vaiisking

Жыл бұрын

Saddles. Don’t mess with the screws once you’ve gotten them to the correct height. That level isn’t subjective, it needs to be precise. Then, the saddle heights are preferential.

This definitely helped with the action and the playability of my CE24 so thank you very much. The way it's set now really plays fast and i love it! The only thing I'm not happy with yet is that the floating tremolo almost sits on the back of the guitar and not parallel to the body. If that's the price for low action, I'm happy to pay it, but ideally that should be fixable. If anyone got a solution for that, I'd be grateful!

@vaiisking

Жыл бұрын

Can you post a pic? Mine is parallel

@flubomzo

Жыл бұрын

Adjust the claw screws (back side under the plate). Looser let’s it tilt forward, probably what you need, tighter pulls it back. There are many videos.

@MaxPower-js1sk

Жыл бұрын

How low is your action? I have a CE24 with problems.

@fr3ak1shh

Жыл бұрын

@@MaxPower-js1sk my CE 24 came with the bridge too high. Even lowering the saddles all the way, action was still ~2mm. Odd slip from PRS.

@wildebassman

Жыл бұрын

You could have just adjusted the sting saddles..

Can you do a video for a string hight (action), what strings are best to you for which play-style etc....? 🙏🏻

@vaiisking

Жыл бұрын

I’ll consider this for a video idea, thanks for the feedback

I can't see what you're doing. Your fingers are in the way.

@vaiisking

2 жыл бұрын

Yeah I’m sorry about that. The manns video shows the strip much clearer. Essentially you use the 2.5 Allen hex key as a spacer underneath and tighten the screw down until the Allen stops it, just snug to that point and then do all the others like the first.

I haves problem that if I am palm muting and my hand is resting on the trem bridge it’s so sensitive I get unwanted vibrato and it won’t stay in tune no locking tuners it’s a week old swamp ash special but no dinks anywhere , so with checking and if needed screw adjustment will that solve my issues? Thank you

@vaiisking

7 ай бұрын

action will affect it all for sure...neck relief, string height, intonation...all of it. have your local pro check all that.

@stephenfell4338

6 ай бұрын

It’s nothing todo with action that’s a personal setting that shouldn’t affect the tremolo it’s just the quality of the SE models that cheap I have core USA models and they are fine I found the tension on the springs are critical the nut has to be changed and locking tuners help or lock string winding

I appreciate you taking the time to make this. Decided to try my hand at doing my own setup and this specific point was something I couldn't find elsewhere. I'm having an issue though, I can't get the action where I want it with these screws set to this height. What could I be doing wrong?

@vaiisking

3 ай бұрын

Gotta set them to that height and not really touch them. It would either be the two hex screws in the saddles individually or your truss rod isn’t set right. If you have trouble with that, take it to a local pro.

@martinleecumming2480

3 ай бұрын

Thank you for taking the time to reply. Appreciate the response.

Can you post the video link for the mans trem please?

@vaiisking

Жыл бұрын

m.kzread.info/dash/bejne/lXx1wdquaJeagtY.html

how would you adjust the action if it was too high?

@vaiisking

Жыл бұрын

Via each saddle, independently. Since there is a definite “height” that gets imposed by the trem screws, that has a little less flexibility

Are those saddles the String Saver Graphtech saddles?

@vaiisking

Жыл бұрын

Yes they are!

@matthenke1257

Жыл бұрын

Nice! I have those same saddles on my SE. Safe to assume they would also fit my American Custom 24 S2? Thanks for the reply.

@vaiisking

Жыл бұрын

Yep I believe the scale is identical.

What are those black saddles? Where did ypu find those bro?

@vaiisking

Жыл бұрын

Graphtech saddles, highly recommend.

@pavlepaja7642

Жыл бұрын

Can you tell what saddles model is that ? I gonna buy them Btw what is the difference beside they look super cool ?

@vaiisking

Жыл бұрын

Graphtech is made of material that keeps the strings from breaking as much.

ThankYou So Much!!!! I follow your step Solve my 10year problem!!!! No One talk the Floating Bridge height!!!! My PRS SE Singlecut have same Noise Problem .. Only G and B STRING 5-12 fret buzz / machine noise 12Fret height:3/32 NOW!!!! I follow your step and truss rod ... 12Fret: 2/32 and no noise

You should have card under the back edge of the bridge or you will end up with bridge bite in the body !

@vaiisking

7 ай бұрын

Next time

thanks for the info..but, most of the detail was hidden by the camera angle with your hand in the way.

@vaiisking

2 жыл бұрын

I’m not the best cinematographer…

Never played it afterward to see if the dinks were gone?

@vaiisking

3 жыл бұрын

Dinks weren’t completely removed but vastly improved. Those frets are quite low and I may end up getting a new neck or a refret in the future

The bridge is too high… prs spec is 1/16 and level…… in mm it’s approximately 1.6mm.. i do appreciate the video though.

@vaiisking

2 ай бұрын

It’s been working for me!

Relieving your truss rod would be a better fix for this. I wouldn’t recommend anyone adjusting those tremolo screws.

@vaiisking

3 жыл бұрын

There’s nothing to be afraid of if you grasp how it works and have no tension on it when you do so. If one doesn’t understand the mechanism of it, then I agree they should take it to a qualified luthier, however I took mine to a local luthier once who didn’t settle the divots equally and the baseplate jumped off on that screw, so I learned how to do it for myself 🤷‍♂️

@CapeAlan

3 жыл бұрын

@@vaiisking if they NEED to be aligned then yes that’s how it should be done but those “dinks” are from your neck not having enough relief. Not from the height of the bridge. Two totally different repairs.

@vaiisking

3 жыл бұрын

@@CapeAlan actually think I also had a little bit of uneven frets happening. However the height consistency by PRS specs standards makes the allen hex tool technique a good thing to do because it sets them to a perfect level for each one without “guessing”

@CapeAlan

3 жыл бұрын

@@vaiisking I would just hate someone to watch this video thinking this is how you adjust the bridge on a PRS. IMO what you’re doing here is a last resort after truss rod, action, intonation, and then a fret level and dress.

@vaiisking

3 жыл бұрын

@@CapeAlan but the responsibility to know when it is needed falls on each of us. If an actual reason to do this for whatever reason (bridge replacement, pawn shop find, poor local ,etc) then IMO, this is the method to use.

You don’t need a notched screw for this vibrato bridge. Paul is a creative designer but not a good engineer.

@vaiisking

Жыл бұрын

I’ve heard many say this too

Intente hacerlo por mi mismo, al no lograrlo la lleve a una “lauderia profesional” y tampoco lo consiguieron y solo terminaron arruinando el acabado de mi hermosa guitarra…

@vaiisking

3 ай бұрын

PRS trems are unique for sure and require someone with experience unless you are able to get this video to make sense and do it this way

@Krazy3034

3 ай бұрын

@@vaiisking Realmente no había realizado este método con llave Allen, pero ayer justo después de comentar, fui a comprar una llave Allen, y logre ajustar los seis tornillos, quedo fenomenal!! Lastima que el acabado haya sido dañado por terceros…

I screwed my PRS trem flush to the body , so much better imo 👍

Nice hands, but I guess that's not why you made this video.

I would not touch those trem screws either- if you’re at that point, you need a pro to set up your guitar, the trem screws on PRS guitars are extremely fragile. I hope folks do not take the advice of this video.

@vaiisking

Жыл бұрын

A year later and it’s still playing like butter.

@SuperLandslide

Жыл бұрын

They are screws. They are meant to be touched. This is a great video if you understand the concept of what's being taught. All six screw need to be exactly the same height. Using the allen wrench as a feeler guage is a great way to do it.

Very unprofessional!

@vaiisking

2 жыл бұрын

I am definitely not a professional, just intelligent and crafty.