THANK YOUUUU! I was looking for videos on how to fix this and nothing came up after 2 days of searching, I’m not sure if this guy is still alive or not but he really helped me out a lot because I thought I needed another sewing machine and I was stressing so bad, thank you so much sir for existing

Thank you for this video. It's been invaluable. In my brand new Singer 4452 I had my thread bunching up under the fabric and the Singer reps kept insisting it was a timing issue despite that I mentioned that the thread kept getting caught inside the bobbin casing. I checked the timing and it was absolutely accurate on catching the thread at the precise moment with any needle position, and the position of the needle hole in relation to the hook tip was accurate. Your video helped me figure out two issues: the thread clearance and that the little pointed latch that holds the bobbin casing was off place being positioned too much toward the front. Problem solved!

Merci beaucoup, j’ai pu régler mon problème grace à votre vidéo.

Thank you! I’ve searched and searched why this was happening

Thank you for sharing this video.

Very helpful thank you so much i did this to my machine now it's working

Teşekkür ederim Çok yararlı oldunuz

I pray this works! Thank you!!

can you make a video on placing the bobbin casing in the proper way my casing doesn't allow the bobbin to move

Thanks for your help. I have a singer machine model 717 , I having problem to get top thread hold the bobbin , what should I do? Thank you for your help?

Graças a Deus encontrei sei canal já subrescrevi a minha máquina está sempre a partir a linha já não sei o que fazer 😘

My Centaur 4613 had this problem and this fixed it! Thanks. However, the machine stitches one or two stitches then tangles underneath. Any idea on how to fix this?

there is a similar adjustment like this for the Futura 900, 920 and creative stitch 1036 machines.

I am having problem when winding the bobbin, and the thread is winding at either the tip top of the black ring of empty bobbin or at the bottom where the screw touching the screw.... Please help

I have a bicor vx1005 Brother sewing machine, and I don't have an instruction book. I've had it for a few years , and I don't know how to remove the barbin case . I tried and tried do anybody know how I can take it out ? it's up in the front where the needle is . I wanted to check it to see if I need a new one or if it need cleaning , anybody have any advice . it's like it's just in there and will not pop out. I haven't used it since I bought it I'm about to kick it up a door.

Iuhuuuu mersi mult de video, aveam aceeași problema ca și a Caramelo ,scuzama am o Singer 702 și nu I găseam rezolvarea,firul rămânea agățat, nu mi venea sus. Am viziona N videouri și abia acum am văzut de ce Mersi mult.

Please I need guidance on my singer MERRITT 1862...can't thread it and if I try it doesn't work out

I'm having this issue with my Singer Touch & Sew model 603. how do i adjust the thread clearance on this model?

@ChunkyChest

7 жыл бұрын

I would also like to know this.

@SINGERonlinecom

6 жыл бұрын

the thread clearance needs to be a 1/16" or less, just enough for thread to pass. this is tricky to explain, I will look into making a video on this topic.

@laranader7584

4 жыл бұрын

SINGERonline.com I need this too pls

can you do a video on how to adjust tension on the 6251 model I am having problems with bunching on the bobbin side of the stitch and can I oil this machine... Thank you

@SINGERonlinecom

6 жыл бұрын

Oil it lightly, and double check upper threading pattern. Thread isn't getting into tension correctly. Blow out your tensions disks with compressed air in a can. Sounds like they are sticking open with debris stuck in them.

Tendrá el tutorial para reparar la palanca de retroceso de esta maquina?

This is my problem exactly, but I don’t seem to see a screw, only a hole where you are pointing. I have a Singer Cocktail6252. Is this fixable or going to cost more than the machine is worth. Can send photos if needed. Than you.

Good Afternoon, i have a singer 6235 and the slide plate is stuck opened. Can you please advise how to fix it? Thanks!

@Pneumaticcannon

4 жыл бұрын

Little catch left hand side, push it around a little bit and close the door

were do i find how to adjust the position bracket on the singer 66-18 loops on bottom.

@SINGERonlinecom

6 жыл бұрын

loops on bottom isn't a bracket issue, sounds like its an upper threading issue. tension disks may be sticking open. check inside for debris and blow them out with compressed air in a can.

Hola, necesito centrar el peine y centrar la planchuela para q no se mueva y suene, como hago? Gracias

Meri singer machine ka model 1288 hai is ka cital nahee chal raha is ko sahee kernay ka tarika bta dain

My machine is so hard to turn on i put some oil,not moving then what to do? Pls, help

The machine timing slipped out and won't pick up the bobbin thread. See our video "Timing a Singer 750". Otherwise, you will need a mechanic.

Bunu Türkçe açıklamasını yaparsanız çok sevinirim Teşekkür ederim

Hola, hay video en Español, ?

Hi do you know how to adjust the needle position on this machine I can't seem to get in the center its off to the left side?? What happened I was adjusting the timing from one of your other video's from Singer I don't know why I can't get it to go in middle position?

@SINGERonlinecom

6 жыл бұрын

Every model is different.

@benedictaopogah1118

5 жыл бұрын

+SINGERonline.com I have a singer machine with 786 stitches how can I operate it? Fixing the thread and the bobble. How can I get the Manuel online. Thanks

Whenever I try to catch the bobbin, nothing moves in the cartridge and when I’m moving the spinning thing on the side to bring the needle down, it doesn’t let me go all the way..... it’s a single zig zag 547...... help

@SINGERonlinecom

4 жыл бұрын

It sounds like the upper gear is broken that connects the top and bottom of the 457 machine. It needs a tech to look at it.

I'm worried about my zig zag singer sewing machine doesn't moving the babbling holder

I'm worried about my zig zag singer sewing machine doesn't moving the babbling holder.

I can't even get my bobbin wheel to go in circular motion to catch the bobbin thread

It won't work for singler futura ii 920 no matter what I do it still catches There not many videos for that machine

Singer 6235 I have an issue with threading the bobbin.. The thread goes under not in it. How can I fix that?

@avde

2 жыл бұрын

Me the same.....

@bun1453

7 ай бұрын

kzread.info/dash/bejne/pKisp8yugpPLacY.html

Buenos los vídeos pero en español por favor

What happened when bobbin is not moving

What causes such problem anyway?

My singer 9960 bobbin keeps jumping up and down. Nothing Ive done will fix it . Do you have any suggestions. It sews fine meaning the stitches look great but it sound horrible because the bobbin is bouncing. Help please. I just got this machine.

@SINGERonlinecom

6 жыл бұрын

It sounds like the top thread is not right. Check the thread path with the instructional manual.

سلام عليكم ممكن شرح تفاصيل فديو بل لغه عربيه تفيدنا اكثر

Muy bueno pero necesito los vídeos en español

L