Thank you , best instruction on PGJ 's on youtube !

Great vid, super detail, I had no idea there was a filter down in there, tysm!!

Echoing other comments, this allowed me to set up the sprinkler exactly the way I needed.

Excellent video! Way better than the Hunter video. Perfect for a complete noob like me! Has all the basics allowed me to get my sprinklers dialed in.

Thank you. You simplified the explanation for how to adjust these. Hunter makes these needlessly confusing.

Very infomative. You made it easy to understand comparing with Hunter's video. I just saved this video for future reference. Thank you so much.

Thank you for the video. Well explained!

Thank you so much! I followed your instructions today and great result.

You did an excellent job on this. Better than the Hunter guy.

great explain, I was able to ajust Hunter sprinkler head after watching this video

Very helpful, thanks!

Great explanation, thanks.

Nice one. Thanks.

Vary informative

Thank you!

Brillant Thank you

Thx

Can you make it so it will not rotate? I adjusted it down but it still goes maybe 10 degrees. Can I gut the innards? Just have a thin strip to Irrigate.

I cannot get the hex screw to sit in the nozzle screw. Idk if there’s dirt covering it up but it’s driving me crazy.

@thesprinklerchannel

Ай бұрын

Could be that, also could be stripped out

how efficient is the spray curtain on hunter pgj sprinkler. where would the most water be delivered on a spray distance of 30', the last 5' (say 25-30') or would it be delivered evenly from the sprinkler to 30'? also what brand or model would spray the most even curtain up to 30'? thanks

@thesprinklerchannel

Жыл бұрын

All heads are designed for even distribution the entire spray distance with proper installation and water pressure is also a key factor.

Do you have a video on how to install a rain sensor to the control box?

@thesprinklerchannel

11 ай бұрын

We don't yet but thank you for the suggestion. Essentially you will run the wire to one of the terminals that say "REM" above the terminal, then place the rains sensor outside on the gutter or such where it will be exposed to rainfall. Adjust clock setting accordingly to turn off when it rains.

On the pgp you can take off the cap and can you do that on pgj and pjp ultra

@thesprinklerchannel

Жыл бұрын

I’ve never have needed to. Let us know how it helps you. Thanks!

Hi, my new Hunter pgp ultra head doesn’t seem to have the right stop. When I twisted it to the right, it just kept going and going. When I installed it, it goes 360 degrees. How do I set right stop until it clicks and lock to place?

@thesprinklerchannel

Жыл бұрын

Make sure you don’t have a full circle model. Those will continuously turn in circles and can’t be changed. If that’s not the case, the gears could be stripped and it needs replaced.

It is VERY inconvenient that Hunter sprinklers are aligned right because the landscape subcontractor just dropped them in the ground and moved on to the next house.....leaving me to have to dig them up to make that right alignment adjustment. It would be much better if they simply made a sprinkler head where 90 degrees was the max and you could narrow the angle as needed.

@sebastiaan84

2 ай бұрын

They make that

My left adjustment spot seems like there’s nothing there for the tool to lock into. Would you suggest replacing it?

@thesprinklerchannel

Жыл бұрын

Maybe filler with dirt or stripped. Replacing it may be your best / easiest solution

@TDace25

Жыл бұрын

@@thesprinklerchannel ended up replacing two heads. The piece the tool fit in was completely gone (comparing it to the new heads at least). Wouldn’t surprise me if they were like that when the builder put them in. Thanks for the content

Where do you see a plus and a minus sign on this sprinkler head? Did you mean right arrow means plus and left arrow means minus?

@thesprinklerchannel

2 жыл бұрын

Clockwise turn will increase (+) rotation or arc of head and counter-clockwise with decrease (-) rotation or arc of head.

The arc adjustment screw head is wallowing out,so how do you disasemble the head to replace the screw??????

@thesprinklerchannel

Жыл бұрын

At this point, I would be replacing the head for $10 to avoid spending an hour trying to get it out.

@greenpwr25

Жыл бұрын

@@thesprinklerchannel yes, I agree, I was hoping there might be a quick trick to this problem,,,,OH by the way,,,the hunter heads at our local LOWES are closer to $ 30.00,,,,,thanks....

What do you think the problem is if the sprinkler is not rotating ?

@thesprinklerchannel

Жыл бұрын

Internal gears are worn out. Replacement needed.

@stevenbyun

11 ай бұрын

Maybe the water is not turned on?

Can you adjust the head for faster rotation?

@thesprinklerchannel

Жыл бұрын

There is not unfortunately.

@karlmartus4619

Жыл бұрын

Gears may be worn from adjusting right stop in correctly. ( turning whole stem instead of removing head assembly

Have no idea how to stop it from rotating 360 to only 90

@thesprinklerchannel

Жыл бұрын

Ensure you don’t have full circle heads - they can only do 360

@lilphilosophy481

Жыл бұрын

@@thesprinklerchannel thank u I just got the tool mixed up i put the hexagon end of the tool in the rotation end instead of the other end of the tool

@Max-si8sy

Жыл бұрын

I did the same 😂

Is it possible to damage the head by doing these steps wrong? What should be careful NOT to do?

@thesprinklerchannel

2 ай бұрын

I would be careful not to make adjustments if all you hear or when you hear gears clicking or ratcheting. Should be a smooth process when adjusting.

@rael5469

2 ай бұрын

@@thesprinklerchannel My problem is that the subs who installed my sprinklers didn't do the right alignment. Now I would have to dig them up to adjust them properly. Thanks very much for making this video. Much appreciated.