Adjusting a Hunter Rotor: Rotor Right Stop Adjustment
Тәжірибелік нұсқаулар және стиль
With a rotor tool, its easy to adjust the left stop, but ever wonder how to adjust the right stop after install? Mike from Hunter technical support will show you two ways to adjust your Rotor Right Stop. This technique works for all rotors including Hunter's popular PGP, PGP-Ultra, PGJ and SRM. (we also have a quick tip video about how adjusting the arc and radius of Hunter rotor • How to Adjust a Hunter... )
Subscribe to our Facebook and KZread page to see other videos and to be part of future promotions!
/ hunterindustries
/ hunterirrigationprod
Пікірлер: 251
This was by far one of the clearer explanations I have happened across thus far. Great camera work, image clarity, and verbal articulation. Thank you!!
@Hunter_Industries
3 жыл бұрын
Glad it was helpful!
After 10 years, it is still a lifesaver🙂 Thank you Hunter!!
Finally!! Someone who knows how to clearly and simply explain something! With excellent video to go along with it! Well done! Subscribing...
@Hunter_Industries
2 жыл бұрын
Glad it helped!
I am familiar with Rain Bird adjustments but I never could figure out Hunter until today! Excellent explanation Thanks
@Hunter_Industries
4 күн бұрын
Glad to help!
To anyone out there, a word of warning: in this video the large, black plastic ring he unscrews at 3:20 to remove the inner barrel/sprinkler riser loosens up with hardly any effort. IF this same ring on your Hunter I-20 sprinkler head has not been removed in a long time, there is a high probability that as you crank on the ring counterclockwise to loosen it, instead of "only" the ring coming loose, the ENTIRE sprinkler, (meaning the inner barrel/sprinkler riser, the ring AND the outer barrel) may come loose from your water feed line below the entire sprinkler assembly. How do I know? This happened to me today when trying to remove the inner barrel to set the right stop of the arc. I then put the entire sprinkler assembly in a vise and tried to loosen the ring with a pair of channel-locks. No dice. I then tried loosening the ring using 2 channel-locks gripping the ring and the outer barrel. Still no dice. The bottom line is I couldn't get the ring off (to remove the inner barrel/riser) without crushing / completely destroying the outer barrel. When I called Hunter Tech Support the guy I talked to said that in order to NOT have the entire sprinkler assembly come loose he digs down BELOW the ring and puts a pair of channel-locks on the outer barrel and then twists (either by hand or a second pair of channel-locks) the ring loose. Bottom line: be prepared for the ring on your sprinkler to NOT come loose as easy as in this video. Sorry for the long post but maybe this will help someone out there.
@Safemoonprince
10 ай бұрын
That’s common sense tho. I work at a soccer complex so we’re always replacing head. You need to dig about 10 inches to be able to get the guts out of the sprinkler head. Other wise yeah the whole unit spins and you might get a leak or the whole head just popping out of the ground.
Omg this was so helpful for a sprinkler newbie! Thank you for saving me $$ and not needing to call a landscaper!!! DIY is the best!
I work with Hunters everyday and this actually helped me a little as I did not ever know of the second technique which can come in quite handy at times. The Hunter channel is one of the most informative on youtube. Please keep posting vids!!!
Thank you, thank you, thank you, like other readers I played around with adjusting my PGP for hours. Finally gave up and just put a cinder block to stop excess swing/throw. Every spring I vowed to figure it out...this year is gong to be different I thought....nope this went on for 6 years. I even bought a new sprinkler head and read the instructions on the inside to no avail, guess I had to see in action. All they would have had to say is that the right stop is not adjustable unless you tighten threads or lift up and realign gears. Again thank you !!!!!!!!
I had been struggling with my Hunter heads after trying to follow the directions that came with purchase, but fortunately I found this video and finally I was able to put it all together in my head, and made all adjustments in 5 minutes, after what had been hours of frustration. Thank you for this video.
@donmelbouchard
4 жыл бұрын
Ditto! Trying to adjust with the spray flying is hilarious for my wife to watch, but a drenching for me. Thank you!
@davidcarravaggio4124
3 жыл бұрын
Great video, hunter sprinklers have been the Bain of my existence but no more
Outstanding video. After viewing, I was able to achieve what our association landscapers could not for the last 5 years. Now the heads on my property are all properly aimed. Thank you Hunter Industries.
Had this system put in 18 months ago and needed a few new heads. Thank you for this easy to follow tutorial.
Perfect! Appreciate the "two methods" to adjust the right stop; some other videos just say to tight the whole rotor sprinkler clockwise, which could crack the rotor bottom or the underlying threaded riser if the rotor was fully tightly screwed on already.
Thanks so much for this video! I just bought three of these sprinklers to replace weathermatics and was stumped on how to adjust them.
Dude, I have been looking for this video for ages!!! Thank you so much for taking the time to do it. Good job. Thanks, Chuck
This was exactly what i needed. I’ve been messing with these screws for days with no result. Now i learned that the sprinkler doesn’t need to be running to adjust it, and no need to wait to see how it turns after changing a setting. Now i know exactly what to do 👍 But maybe i broke some heads already. Will see.
@alberry2345
2 жыл бұрын
Great video. I tried looking through the instructions and they seemed a little challenging. I adjusted 6 Hunter heads today and they all went well so thank you very much for helping the instructional video.
Thank you so much. It’s so simple after your video. I had to unscrew the top and reset the unit. Thanks for keeping me from breaking the threads trying to over tighten to get the right stop set...
I've changed out many sprinkler heads over the years... but I was frankly shocked at how well this method worked. The sprinkler came out exactly as described in the video, with a perfect hole waiting for the replacement head. Awesome
@Hunter_Industries
2 жыл бұрын
Glad it helped!
Thank you for the clear instructions. I first tried a different brand but gave up after much frustration. I then went an bought a Hunter, with your clear instructions, it was easy to make the necessary adjustments
The best instructions I have watched. Thanks. Definitely was not going to pay anyone to adjust mine for me. Appreciate it.
The best video I’ve seen, thank you! After hours researching and trying to adjust our irrigation after we build new patio, you explained it in 17 seconds
@Hunter_Industries
2 ай бұрын
Thank you
I just want to say thank you so much. You helped me totally understand how is sprinkler works!
This is the best adjustment tutorial I have watched so far. Thank you, heading out to the front yard.
That was the simplest instructional video I have seen in regards to this adjustment. I would have loved to have seen this video first and not wasted my time on others. Thank you!
You made my life so much easier and saved me a bundle. Thank you. The best instructional video ever!!
Awesome! I work for an irrigation company and I have to explain this to people a lot.
I have been trying to figure out the right stop adjustment for several days on one of my heads. So far, this video has saved my last nerves. Thank you!
@Hunter_Industries
2 жыл бұрын
Glad it helped!
This was the Gold Standard by far, of how to adjust these Hunter PGP heads! Bravo,,,,
@Hunter_Industries
2 жыл бұрын
Thanks for watching!
Very helpful, and nicely done video!
I would love to say big thanks to this video and that man. That's exactly what I needed for weeks. I had tried to call the sprinkle company to come and fix it but they did not show up. After watching it, I know how to adjust both the left stop and esp the right stop. I watched soany videos but they just showed how to turn the left ones only.
@Hunter_Industries
2 жыл бұрын
Excellent!
By far the best video on how to properly adjust the sprinkler heads.
@johnastrello
6 жыл бұрын
Agreed. Been messing with these for years, and now I know how to adjust the heads! Thank you!
Yes the best instruction. Clear and simple. Great job! Thanks
Thank you for this video! Very helpful! Everything works perfectly now!
Thanks for this very concise and well explained video. Was able to easily adjust my sprinkler heads.
Had a new fence installed and I didn’t want the old heads hitting it and leavings water marks. Made the adjustments and now there perfect. Thank you
@Hunter_Industries
2 ай бұрын
You're welcome
Thanks, dude! I had to take it apart as described in the second part of the video. Worked just as you described. Now my stairs don't get watered!
@Hunter_Industries
3 жыл бұрын
Glad it helped!
This is really great and exact. I was trying to follow the instruction that comes with the product but to no avail. I am actually planning to return it today but would defer doing it after I saw this video.
Great job explaining how to adjust a rotor.
I like using Hunter PGP’s because it’s a fair price and they last a long time. I actually enjoy my customers having a tiny service bill. Makes me feel like I’ve done quality work. They last 10-25 years easy. Not sponsored by hunter.. Over 20 years experience and I’m 36 years old.
Super helpful. Straight to the point. No weird intro or KZreadisms. Great video.
@Hunter_Industries
2 жыл бұрын
Awesome! Thanks for watching!
Thanks for a simple and great explanation.
Thank you. Great help. I've got one head where the tool simply can't locate the square hole to adjust the radius. Any thoughts. I'm assuming it's clogged with debris.
You save my day thank you
Finally a video that explains the adjustment clearly.
The best I have seen to adjust Hunter sprinkler ❤️
@Hunter_Industries
2 ай бұрын
Thank you
FINALLY!! Thank you for the great video. Probably should have the right stop adjustment info in the owners manual. Just saying.
This helped a lot! Thanks mate, from Australia 🇦🇺
@Hunter_Industries
2 ай бұрын
You're welcome
I have had mine for years and never realized you can adjust these when the water is off.....I get soaking wet everytime I mess with my system. Nothing like a beached whale running out of the way of the sprinkler. My neighbors must get a good laugh. Good Video Thanks
Best Hunter sprinkler head adjustment video ever!! Thx!!
Thank you very much for video, which is so clear to understand the procedure.
thanks for the video. just installed a new head and adjusted 2 others.
Just like what everyone is saying, this is the best instruction ever.
@Hunter_Industries
Ай бұрын
So glad it's helped!
Excellent video - I should have watched this before going out and trying to set them while they were running ;-)
Thank you excellent video directions - so easy when the directions are clearly explained.
@Hunter_Industries
Ай бұрын
Glad you enjoyed it!
Thank you! Very informative and to the point.
Thank you for the easy and precise explanation. One question please, how do i get the sprinkler to water closer to the head, it sprays far away and makes puddles and 3 feet near the head it is barely wet. Same problem with the MP rotator. I have chosen Hunter for all the sprinkler heads and I need some help.
Excellent video!! The trickiest part is the Hunter instructions do not inform you how to adjust the fixed right stop in correct position before you go ahead and adjust the arc via the left stop adjustment.. took me 3 mins after watching this video
Very informative, really nice video!
Very helpful for this novice. Thanks!
This was the best video I've watched to explain how to do this and was very helpful thank you so much!!!!!
@Hunter_Industries
3 жыл бұрын
Glad it helped!
Any tips on cleaning/replacing the spray nozzle ? One nozzle on the rotor head just refuses to deliver the water even though the head pops up. The other two rotors in the station sequence work fine. Thank you!
Hi I was wondering if the pgj models with a check valve have a dark gray turret and the ones without a check valve have a standard black turret and also do you make i20 06 ss prb models?
Great Video Explains everything TKS
Thank you! Just what I needed to know for my new system!
@Hunter_Industries
3 жыл бұрын
Thanks for watching!
This video was very helpful, thank you!
Excellent much much better than the written directions thank you and I subbed and upped.
Can you unscrew the top of the sprinkler like you did in the second technique while the line is pressurized or will it spray water everywhere and empty out your entire line?
Best video I watched. Showed me all the adjustments. and what part of the key to use.
@Hunter_Industries
3 жыл бұрын
Thanks for watching!
Bloody brilliant!
Hello Hunter, The rotor that was installed in the corner of the grass next to the driveway has been driven over by a truck. While the sprinkler head is not damaged in any way and is still fully functional, it has put a tilt in the canister and is no longer vertical (or 90° from the horizontal ground). When the rotor has water pressure behind it and it pops up, it is at about a 75° angle which throws off the arc and it sprays directly into the ground about about 2 or 3 feet away from the rotor. While I could adjust the arc, it would still be a bit wonky. How do you recommend I fix the tilted canister? Do I need to dig it up and fix the angle when I put the ground back around it? I am afraid that, if I did too deep, I will cut into the water lines. Do you have a diagram of how the water lines are hooked up to the canisters?
You are so helpful and thorough thank you..
Awesome video! Very clear and concise.
@Hunter_Industries
3 жыл бұрын
Glad it was helpful!
Excellent instructions
Could I apply method #1 if my right stop is too far right? & I want to have it stop further inward?
that was a great explanation! my ex thought he knew what he was doing rather than looking on KZread and ruined my my sprinkler heads!
@vtelematicscompanylimited7152
6 жыл бұрын
That is why he is your ex I believe...lol
Great video! My i20 doesn’t have a cap to unscrew. How do I get the inner assembly out? I need to adjust my right stop.
@Hunter_Industries
2 жыл бұрын
Thank you for contacting Hunter Technical Support. You do not need to remove the cap to make rotor adjustments. The cap on an I-20 has the same openings for an adjustment tool.
mine is performing a full 360. i used the drop method to set the right but nothing with the key sets the left. it just makes a clicking noise when i turn the key?
Great video and explanation, thanks!!
@Hunter_Industries
23 күн бұрын
You're welcome!
When you grab and twist the sprinkler barrel at 1:55 is there a possibility twisting it clockwise might damage the sprinkler in any way?
Best Video yet on how to adjust a Hunter PGP. questions for Hunter in regards to the Head and Assembly that sits in the Cavity/Container piece. Is there a rubber gasket that could corrode after 10 years? One of my sprinkler heads was spraying water from this area causing low pressure output at the nozzle. Ensuring it was free from debris and no visible cracks, I was unable to hand tighten enough to prevent leak. Another unit I have, I am unable to unscrew the assembly. Thinking they were not to be opened, I was able to minimize leaking in the first unit by over tightening it with pipe wrench and vice. (using caution not to crack or damage the unit) How tight should it be? Thanks!
Awesome. Helpful and well explained. Great work.
@Hunter_Industries
2 жыл бұрын
Glad it was helpful!
Thank you so much! This was clear and to the point!
@Hunter_Industries
2 жыл бұрын
Glad it was helpful!
Sweet! Thx
Good video. Note that, to make the left stop INCREASE its distance, you turn the leftmost setting CLOCKWISE -- someting I find a bit counter-intuitive. Also, Hunter or someone makes a small white plastic collar that goes around the sprinker AFTER it has been raised with the little tool. The purpose is so that you don't have to hold it up using one hand to offset the spring. Then both hands are available instead of getting fatigue from counteracting the spring. That is handy for changing the NOZZLE -- which is not accessible unless the sprinkler is raised -- and is not shown in this video.
@Hunter_Industries
7 ай бұрын
What a great tool! Hunter makes a Nozzle Insertion Collar (123200SP) that will hold up a rotor while it's being serviced. You can order one from your local Hunter distributor.
Great video! Just what I needed!!
@Hunter_Industries
3 жыл бұрын
Awesome! thank you for watching!
Just what I needed, thanks so much!!!
@Hunter_Industries
2 жыл бұрын
Happy to help!
how do you prevent the right stop from getting greater over time? I have a traveling right stop. it magically moves more and more to the right every day.
Hopefully the distance is as easy. Nice video! Ty!
@Hunter_Industries
2 жыл бұрын
Thanks for watching!
Great clear instructions! Thank you.
@Hunter_Industries
2 жыл бұрын
Glad it was helpful!
When inner body is pulled up with key is there a way to lock it in that position? It would make pre-adjustment in hand easier prior to install & in more comfortable position than when working at ground level.Be easier than trying to hold it up & adjust rotation while holding against spring tension.
@Hunter_Industries
2 жыл бұрын
Thank you for contacting Hunter Technical Support. The nozzle insertion collar can be used if necessary. Visit the video here. kzread.info/dash/bejne/eoeKlad-gqvOlso.html
Thank you. As a single woman, I pay my landscaper $55/year to adjust the sprinkler heads. If I see brown spots and call him back, I may have to pay additional. This video really helped. It took a few views and some trial and error to understand the "right side" concept and how all arc adjustment must follow the right side. I did have some difficulty moving it. But in the end, I learned something and feel confident that I can perhaps tackle replacing heads when necessary. One thing I am noticing. .. When the system shuts down, the head takes about 2 minutes to slow to a stop and then it needs to be pushed down. Is this normal or is there a way to fix this as well?
thumbs up for creativity; utmost blessings!
@Hunter_Industries
3 жыл бұрын
Thanks for the visit
Thumbs Up! ! Great video - so well demonstrated and explained. Thank you so much.
@Hunter_Industries
Жыл бұрын
Thank you
Helped me alot today. Thanks for the assistance!!
very good video! very good instruction and in focus! Thanks. (now to go buy that stinkin key, sure wish they had given me one).
@Hunter_Industries
3 жыл бұрын
Thanks for watching!
Thank you, very clear instructions
@Hunter_Industries
4 күн бұрын
Glad it was helpful!
Thanks for the great video. I tried adjusting the screw, but nothing happens. Is the pathway to the screw just filthy? I am guessing this sprinkler hasn’t been used in ages.
@betterdayz2011
4 жыл бұрын
Hunter Irrigation thanks so much! This did the trick!
Thanks i official have stopped giving hundreds to others and fix my sprinklers myself!❤
@Hunter_Industries
Ай бұрын
That's great!
Thanks for a Great Video. To me the instructions that come with the head is not very helpful, nothing written just confusing pictures. Now I adjust them like a pro.
The best explanation ever..thank muchhhhhhh.
@Hunter_Industries
2 жыл бұрын
You are welcome!
So if the right stop goes too far to the right do you have to pull the whole assembly out to readjust it?