Do I own a Model A? No. Am I going to watch every video you put out? Uh, yeah. You put out a lot, Paul...if you know what I mean. Videos. I mean videos.

@ModelA

Жыл бұрын

Hhahaaa!!! Don't tell Tina! Thank you man!

You've made the joke before; it's so subtle but I just think about "Welcome back..." Mr. Cotter

@ModelA

Жыл бұрын

People my age and older get it!

Congratulations on 200 videos your experience on model A's is appreciated 👍

Congrats! Here's to 200 more! Also, I'm horrible at anything RC. So, for your first flight, you did extremely well.

@ModelA

Жыл бұрын

Thanks! 👍

Congratulations on 200! Hope the new owner enjoys the beautiful ride!

Congrats on 200 and hope we get 200 more!

Congratulations 🎊 👏 #200 have a great weekend, and have fun. Mike

Congratulations Paul & Tina on #200! You are a wealth of information on everything Model A, it's like going to school but in a good way! Now, if I could just find a channel as good as yours on Model T's...

Thank you once again, Paul. I look forward to several more of your Model A videos. Your presentations are top notch.

@ModelA

Жыл бұрын

Many thanks!

Congrats Paul and Tina! How lucky are we!? Thanks for sharing with us.

Thank you for all you and Tina do to promote the Model A community. I look forward to many more of your informative videos. Be safe and well!

@ModelA

Жыл бұрын

Thank you for being a part of this!

Happy 200th video!!! Every video was GREAT!!!!

@ModelA

Жыл бұрын

Thank you for being part of it!

Congratulations on posting your 200th video and thank you for your dedication in providing great information on the Model A.

@ModelA

Жыл бұрын

Glad to do it!

Congratulations on your 200th! Looking forward to more, and more and more. Well, you get the idea!

@ModelA

Жыл бұрын

Yes! Thank you!

Congratulations on 200, Paul! Keep up the good work. You have single-handedly sparked my interest in Model As!

@ModelA

Жыл бұрын

Awesome, thank you Matt!

Good stuff! Congratulations on 200! Thank you very much Paul for inspiring me too Keep on going on my Model A!

@ModelA

Жыл бұрын

Thank you for being a part of this!

Congratulations on 200 , I enjoy everyone of your videos

@ModelA

Жыл бұрын

Thanks!

I appreciate all the time you devote to show how easy it is to maintain the car…Great videos

@ModelA

Жыл бұрын

Thank you, GW! Thank you very much!!

I always watch like a hawk waiting for the Saturday video to release! Thank you for keeping up the great work!

@ModelA

Жыл бұрын

Thank YOU!

You have created a wealth of knowledge that we all can tap into. Blessings and congrats!

@ModelA

Жыл бұрын

Yes! Thank you!

Congrats on 200! I spent many years in an RC club. Great times and wonderful people. Thank you also for the maintenance tips to help keep our cars on the road where they belong.

@ModelA

Жыл бұрын

Thank you for being a part of this!

Congrats on 200!

@ModelA

Жыл бұрын

Thank you!

200...Congratulations! I'm so happy for you and glad to've been with you along the way

@ModelA

Жыл бұрын

Thank you for being part of it!

Thank you for 200 videos of wonderful instruction.

@ModelA

Жыл бұрын

Thank you for being part of it!

Paul, Congratulations on your 200 videos! Thank you for all of the information you have provided in these videos. They have certainly been very helpful to me. Keep em coming!

@ModelA

Жыл бұрын

Thank you for being part of it!

Happy 200th video it's an honor to be subscribed to the nicest KZread guy there is thanks 😊

@ModelA

Жыл бұрын

Thank you Curt!

good info. and very nice car. Have a great week.👍

Congratulations on 200! :)

@ModelA

Жыл бұрын

Thank you!! 😁

Congratulations and THANK YOU for what you do for the hobby.While there are many books on "How To" for the MOdel A, most of us are visual people and your awesome videos have added so much to us keeping our cars on the road. May the Lord bless you and Model T, as much as you bless all of us!

@ModelA

Жыл бұрын

Thank you brother! God bless

Hi Paul, As always another great video. I'll be out checking my clucth play tonight. Did the RC plane thing but kept having problems with gravity. Mostly cars and trucks now. Looking forward to 200 hundred more.

Great video as usual Paul and congrats on the 200th 😀

@ModelA

Жыл бұрын

Thank you for being a part of this!

Hi Paul, Congratulations on 200 ! Nice video ! im waiting for the next 200! Beautiful tudor. I've the same in blue/green with yellow wheels. Greetings from Ralph The Netherlands!👊 Keep on model A' ing!

@ModelA

Жыл бұрын

Many thanks Ralph!

Wow, 200 hey, that's neat, congratulations for that one. The clutches are a lot like my old tractors, same basic principle. Good one, thanks Paul, have a fantastic rest of weekend.

@ModelA

Жыл бұрын

These cars are basically Ford tractors in many ways

Congratulations 🎊

Thanks for that Paul, my clutch has loads of free play! So now I know what to do.

@ModelA

Ай бұрын

Glad to help Denis!

Congratulations on 200 videos! Watching this while working on my 1994 Ranger…and dreaming of a Model A.

@ModelA

Жыл бұрын

Right on!

200!!! Congrats! Thanks for showing me how to adjust the clutch. Now i have to go out and check mine….

@ModelA

Жыл бұрын

Glad to help

Thank you Paul looks great your the BEST AND MODEL T IS AWESOME 👌

@ModelA

Жыл бұрын

Thanks 👍

Making Model A's cool 'again'? C'mon, they've always been cool! Thanks for another great video, Paul. Congrats on 200 videos! You're a huge asset and ambassador for the Model A community.

@ModelA

Жыл бұрын

Thank you so much!

Well done on 200. Sweet car. New owner 'might' be very happy.

@ModelA

Жыл бұрын

Hope so!

Paul, congrats on 200! I've been doing my car drone footage with the DJI mini 3 Pro. Very easy to fly, stable and excellent 4k footage. It even has auto tracking features

@ModelA

Жыл бұрын

That's what MotorTrend used on the TV show I did too. looked WAY easier than this one! Gonna play with it some more. Thanks!!

Congratulations on video 200! It would seem 201 would be significant, but I’m a nerd for numbers so…..Thank you as always, and nice flying! ~ Chuck

@ModelA

Жыл бұрын

Thanks Chuck!

Did not realize that I’ve watched 200 videos- congratulations- great to see you forgetting to turn on gas - your right we all have done that- I love the fact that you will share your little upps

@ModelA

Жыл бұрын

I show my faults and failures a a matter of policy. I'm just a regular guy, so why not act like it? That's my view. Thanks man!

Paul what a great 200 video and I see you still have some radios laying around ! far as flying and owning a drone and that make two of us !

@ModelA

Жыл бұрын

Thanks, brother!!

CONGRATULATIONS ON 200 videos!!!!!! I knew there was something other than your videos I liked about you, I won’t say what it is but it has to do with having a brain on certain regulatory agencies. 😉. (I read the comments). Great video as always and please keep them coming. I admire the way you do business and act especially after a recent video about an engine,,,,,,. I’m definitely in your camp on that issue. Not trying to get a response just letting you know you are supported.

@ModelA

Жыл бұрын

Thank you, my friend! Yea, that engine.... Well, one is no longer allowed to be honest anymore without being cancelled. Or, at least being bullied. But, I will only speak the truth, always. The good news is, we did finally come together and are friends again, for the sake of the hobby. And I'm thankful.

Another great, helpful video, Paul. Thanks for sharing. In a future version of it, or in a future Q&A, I think it would be helpful for Model A owners to understand how often they should check and adjust this Free Play, does the Free Play get bigger or smaller as the car is driven and the clutch wears, and what are the consequences of failing to adjust it when needed.

@ModelA

Жыл бұрын

Thanks Jim! Hmmm... Need to think on how to do that one. I just adjust it when there's too much freeplay in it.

Great video! Cool that you are into R/C also. I have noticed several other people who are into vintage cars and R/C. OUTSTANDING!

@ModelA

11 ай бұрын

There seems to be some sort of link!

@RAK402

11 ай бұрын

@@ModelA I noticed that you also have old radios (I have a few-not nearly so many). What about trains? I have seen other vintage car guys with trains.

@ModelA

11 ай бұрын

Not into trains. Although, I have started and ran a switch engine and a GP9 and helped work the plate on a steam locomotive, the train bug just never bit me.

What a great video! Congrats on your 200th and congratulations to the new owner of that car; he’s lucky to buy such a well sorted jewel. You’re the consummate radio guy in all aspects! Ironically I had the small unmanned aircraft license from the FAA but never operated a drone 😂

@ModelA

Жыл бұрын

I'm never getting a "license" to fly R/C on my property. Oppressive socialist laws will be fought!!!

@vayabroder729

Жыл бұрын

@@ModelA Oh tell me about it! This was for my work and to inspect building rooftops and the like so we had to learn everything related to airports, etc.

@ModelA

Жыл бұрын

Gotcha. The guy Matthew who was operating the drone for the MotorTrend TV show I shot had to have all sorts of government permissions and whatnot. He was telling me about all the hoops he has to jump through. Insanity! Government is out of control.

Enjoy the drone Paul!

@ModelA

Жыл бұрын

Thanks! I need practice

That coupe is a beautiful car

This is great! Thanks Paul for this excellent video. This will help me a lot when I get my Model A. I would definitely need someone to help me put that linkage back together. Such a beautiful car BTW. ;)

@ModelA

Жыл бұрын

Thanks Hal! Well, you never know... He may want to pass on it. We shall see. Sorry for the confusion.

I usually agree with you on most things Paul, but this time I’m afraid I can’t. Making Model A’s cool again? My friend, Model A’s have ALWAYS been cool! Looking forward to 200 more!

@ModelA

Жыл бұрын

Fair enough!

Thanks Paul I just installed new shocks on a 1931 Roadster that i bought for my wife. Then i couldn't find a video about shocks . Are you going to do one.

Hope you include a tube of distributor lube with the sale.

Paul that Car is so very beautiful in every way....l see some radio stuff...My call sign in Ham Radio was W4-UVT....Thanks Paul...... Shoe🇺🇸

@ModelA

Жыл бұрын

73, K6FRC

Look at all the am radios and stuff!

But Paul, you did actually did, in a way, show how to adjust the clutch. You replaced one and in the set up, you measured the throw out fingers, miced them up before final assembly. So, your not going senile (not yet(. haha

@ModelA

Жыл бұрын

I'm not? Tina says I am. What were we talking about?

Cool! I used to crash, er I mean fly R/C planes too. Not as well as you obviously did, but it was fun. My Gee Bee Model X Sportster was a lot of fun to fly!

@ModelA

Жыл бұрын

Nice! I competed in pattern and IMAC. When the AMA blew it and allowed the FAA force all model pilots to "register" for the privilege, I bailed out on organized aeromodeling. I put in a paved runway on my property and just fly at home now. Pretty heavy into electrics now. But I have a nice trophy wall to remember the good ol days. I am not a fan of government meddling, in case you didn't know.

@JefferyHall-ct2tr

Жыл бұрын

@@ModelA I went all the way back to F/F rubber! Haven't done any of it lately, but still have my AMA card. I think electric is the way to go these days! Lightweight batteries, powerful motors, and a lot less maintenance! Used to have to clean all the oil slime off of the models at the field before we loaded up and went home!!

@ModelA

Жыл бұрын

I still fly indoor rubber. Relaxing!

@JefferyHall-ct2tr

Жыл бұрын

@@ModelA And BEAUTIFUL! I am mesmerized every time I see them fly! My speed is more Hangar Rat or Phantom Flash! I have flown a few scale ships indoors. My Bleriot monoplane was probably my favorite

Helpful video. I put that screw adjuster in mine. Works good but real sensitive. Sorry to see that Tudor go. I get a feeling you are too a little bit. That's a real nice car. Hope the people that bought it enjoy it and give it the care you did. Great skill to Drone in a garage. Is it called "Droning"?. Not sure.

@ModelA

Жыл бұрын

Ha! Thanks! Droning might be accurate.

Paul thanks for panning your future radio restoration shelves, If I may ask what is the 19 inch rack mount gray military looking device, Is it a Single-channel receiver for remote site radio link?

@ModelA

Жыл бұрын

VHF power amplifier. Soon to be modified for 2m.

I like how the drone takes 1950s era Esque footage lol. How fitting

@ModelA

Жыл бұрын

Hahaaa! It does!

This job of clutch free play adjustment on the Ford Model A was an adjustment that had to be made occasionally on all manual transmission cars with the procedure differing on the make and model of car. It is likely that this video is the first time some young people have ever heard about a clutch free play adjustment. Since I was born in 1951 and my parents had manual transmission cars and I once owned a manual transmission cars I am familiar with clutch free play adjustment.

@ModelA

Жыл бұрын

That's right. You and I grew up in much different times though. I'm introducing the world's best automobile to a whole new generation, man. And it is very rewarding!

@danielhomant2832

Жыл бұрын

Many manual transmission big rigs still require adjustment. Procedure is easy despite their size. With clutch depressed, there is a bolt with a spring loaded sleeve on the clutch plate itself. Just reach up through the inspection cover and turn it as needed. 1 1/2" is just about right for them. It is funny how pretty much all clutches have the same general idea on Freeplay and how to adjust.

Tack!

@ModelA

Жыл бұрын

Oh, WOW!! Thank you SO MUCH!!!!!

Here’s to 200 more Paul! We appreciate all of them. I don’t think I’ve checked adjustment on my clutch so this is great

@ModelA

Жыл бұрын

Thank you for being part of it!

I love the old radios. You should do a repair video or a collaboration with Adrian.

@ModelA

Жыл бұрын

I did 18 years ago. Nobody watched

@danielhomant2832

Жыл бұрын

​@@ModelA Well, dang. I'll have to go look for that. Have to get the radio in my 31 working, and I don't doubt that would be helpful.

I use a jack to push the cluch lever up to put the pin back in . I'm not as strong as u.

Hello from Brasil.

I did that on my ford model a?

Thx!!!!

@ModelA

2 ай бұрын

Wlcm!!

Hello Paul, I have a question. Living in California as you do I know they are sticklers on emissions. What my question is do you have to have emissions devices on those old fords? I remember years ago someone told me that they had a 60’s model VW in California and they had to have something on that. Thank you. Robin

@ModelA

Жыл бұрын

The state doe have some tough laws, but itis the counties that add more laws on top of the state laws that make it unbearable in some places. Luckily, I live in one of, if not the most, conservative county in tue state. The county does not add its own laws. Therefore, if you live in my county, and the vehicle is 1974 or newer, you have to get it smogged when you purchase it only. Never again. Since my cars are pre-1974, no smog required at purchase or ever. With that said, I have had a Model A on a smog machine and they are surprisingly clean.

Love your videos. Hey I saw on BAT a ford model A pickup with a pinto engine in it. What do you think of that? I think I would convert it back to a Model A engine.

@ModelA

Жыл бұрын

I wouldn't own it.

@vayabroder729

Жыл бұрын

The fiddling that takes place on cars sometimes is nauseating, especially the LS swaps in older cars.

Congratulations on the first two hundred! Here is to many more! But the chickens are also complaining that they are not getting enough screen time. And they said that they are being stereotyped. The pecking order has been upset.

@ModelA

Жыл бұрын

The chickens are in kahoots

@williamforbes5826

Жыл бұрын

Did you know that chicken coupes may only have two doors? If they had four, it would be a chicken sedan! I was under a Fordor today helping to replacing brake rods. And look for a leak... The new Mitchell overdrive 90° elbow (vent) fitting was loose and it was dripping. Fun. Loads of fun!

do you have any ideas on how i can convert my 1930 plymouth sedan 8 bolt wooden spoked wheels over to steel wheels; i would like to have a wider tire ride on my car do they make a conversion kit;

@ModelA

Жыл бұрын

Sorry, I have no idea

I’m gonna miss your 2 door! While you were adjusting the clutch I wondered if anyone has had a stone go through their battery case

@ModelA

Жыл бұрын

Yes.

How did you make the adjustment adjustment without getting grease on your shirt. For me any foreign material within arms length is automatically attracted to my closing.

@ModelA

Жыл бұрын

I try to keep the car clean. But it doesn't always work out.

Amazing. Guess what I have to do tomorrow before starting my new engine for the first time????

@ModelA

Жыл бұрын

Lube the distributor?

@Daddyfixit

Жыл бұрын

@@ModelA American humour? Love it.

@ModelA

Жыл бұрын

@@Daddyfixit Yes! Haha

@Daddyfixit

Жыл бұрын

@@ModelA after the dropped valve, went for a fully rebuilt engine. 6.1 head, modern valves, shell bearings …. The list of adjustments, settings and fettling seems endless. Then to really enjoy the car, and my overdrive.

@ModelA

Жыл бұрын

@@Daddyfixit About time. Good work!

Super👍😎

Good day Mr. Shinn, I followed your clutch adjustment on both of my cars. Having said that, I just bought a 1930 Standard Coupe' that was restored many years ago but only has just over 1400 mile on it. My truck worked perfectly after the adjustment but the coupe' gears keep grinding when I try to shift. I have done the double clutching and tried at different speeds but it is like I have no clutch at all. I went further and moved the adjustment more turns up but that just made the clutch slip all the time. I sure would appreciate any advice you might be able to pass on to me even though I know it's hard when you are not here to see the car. I have been in Model A's for over fifty years and this is the firs time I have run across this. Many thanks, Clinton

@ModelA

Жыл бұрын

When the freeplay is adjusted out, where (how far off the floor) does the clutch start to catch? Might just be a worn out clutch disc.

@clintonrothwell5709

Жыл бұрын

@@ModelA, Thank you so much for getting back to me so quickly. I will adjust the clutch as per your video and do that check. As I watch your video again I have taken note of the distance your foot comes off the floorboards before the car starts to move and use that as a bench mark. I will also do the same with my 28 Closed Cab Pickup for a comparison and get back with you. I am also running the 1500 weight oil in the gearbox and differential which I just did the fluid change and lubed the complete car. I haven't driven her as yet with the exception of going down the street to check adjustments. Again Mr. Shinn, thank you for your time. Your are very kind, Clinton PS The clutch is very heave much heaver than my other Model A. I put it down to being a restoration with only 1400+ miles. What do you think?

@ModelA

Жыл бұрын

Hey Clinton, Glad to help. The clutch being heavy means something is not right, binding, or in need of lubrication. Or, maybe you're used to the V8 clutch? You need someone familiar with stock Model As to check out your car. With a new clutch, the clutch should start to grab just a little after the half-way point. With a good clutch that has some miles on it, grab starts about the half-way point in travel. With a worn out clutch, it starts to grab right off the floor. All the best!

Hi Paul! My clutch spring is missing on my Model A Ford Tudor. I have the part, but don’t know how or where to install it. 🤭

@ModelA

Жыл бұрын

Clutch springs goes inside the bell housing. One end connects to the throwout bearing carrier, the other to the housing.

@juliabyrens2533

Жыл бұрын

@@ModelA thank you so much for your prompt response. I’ve been watching all your videos, since I was gifted my fathers 1930 Model A Ford Tudor he owned for over 40 years. I can’t thank you enough for the information and visual mentoring you’ve given me.

Just an FYI Paul my Granddaddy worked for Fords till He retired and the story He told was that he helped develop the electric starter, (allegedly) this is when I was a wee lad back in the early 50’s and he was already retired. I have no proof of it but why would my grandpappy tell stories to his grandkids if they weren’t true.

Where did you get the oiler bottle?

@ModelA

Жыл бұрын

I don't remember. I have dozens of them from a long time ago.

Just a quick question, but nothing about the clutch, but why are the taillights not in the center of the fenders?

@ModelA

Жыл бұрын

The left one is factory. The right one is aftermarket. That's just where they go.

We will miss your car in up coming videos 😢. I just don’t know how you can sell a member of the family like that. I hope I never have to make that decision ever I’d probably be an amputee before selling. Tho I do have a sweet restored 26 I would part with for another A. Thanks for the video. 200 a good number 200 more I say. 😊

@ModelA

Жыл бұрын

Thanks Brenda! I have a couple more Model As on the way, so I need the space. Don't worry, never selling the fordor or the sport coupe.

Do you need to double clutch a model a

@ModelA

Ай бұрын

When downshifting, yes

I actually like the drone shots as it looks OLD TYME !!!

@ModelA

Жыл бұрын

I wonder how it would look flying over a model railroad setup??

@N-Scale

Жыл бұрын

@@ModelA It would look cool but my venture sucked as I am horrible at RC

@ModelA

Жыл бұрын

@@N-Scale I think it would look pretty awesome. Hey, don't they have R/C for model railroading now??

@N-Scale

Жыл бұрын

@@ModelA They do but in larger scales than we sell.

@ModelA

Жыл бұрын

For many years, I have has an idea in the back of my mind for an O scale or similar outdoor railroad on our property. Maybe if you ever find yourself in my area, could you please have a look at the property and let me know if it is a good idea or if I should stop thinking about it?

Paul, what ya' know about '29 Packard clutch adjustment? I've been on every forum on the web with no help. Restored '29 633 Club Sedan, about 1,800 miles on it since a ground-up resto done by a professional classic shop in Minnesota (I'm in Louisiana, bought the car two years ago), I've never been able to get the clutch in a happy place. The clutch pedal feels like a dead fish, clutch engages when the pedal is about 3" off the toe board, you've gotta' put it on the floor to shift. I used to drive these things all the time (and Model A's), never had one act like this. Have tried messing with the adjusting rod endlessly, no matter where I put it, this is all I get. Is it possible they put the lever to the fork to the throwout bearing on in the wrong position? Can't find anyone else that will send me a photo of theirs. Your videos are fantastic, I grew up with Model A's. Thanks much!

@ModelA

Жыл бұрын

Thank you so much! I am truly sorry, I don't know squat about Packards. All I know is Model As, literally nothing else. I'm not a car guy, just a Model A guy.

@nachtjager77

Жыл бұрын

@@ModelA Well, you do it well! Thanks man and keep the videos coming!

That's it ?! Just... two little turns? UAU, so Simple !!

@ModelA

Жыл бұрын

It was already pretty close, so it didn't take much. I just want the car to be perfect for the new owner.

Ca t access subscription

200

Сдаётся мне, что у самого Генри Форда модель А сверкала не так сильно, как у Пола Шина. It seems to me that Henry Ford's own Model A did not sparkle as much as Paul Sheen's.

Your giving up Gandolf The Green?! Noooo!😟

@ModelA

Жыл бұрын

Yea, looks like it.

You need a third hand/arm for that job.

@ModelA

Жыл бұрын

Yes, but she was busy with her chickens

Paul, that's her opinion and what does she know? (Please don't ask her) haha

@ModelA

Жыл бұрын

Haha

What's with that last 1 minute of goofy shots of your storage shelves?

@ModelA

Жыл бұрын

My first drone flight. Was trying to video the car. I need practice.

@ModelARickLasCruces

Жыл бұрын

@@ModelA No problem :)

@ModelA

Жыл бұрын

I also now realize that my shelves are in dire need of reorganization.

@ModelARickLasCruces

Жыл бұрын

@@ModelA You're not the only one who has this problem! My shop shelves are in dire need of reorganization too.

You would be crying if you crashed it and chipped the car for sure. 😭 living kinda risky there Paul.

@ModelA

Жыл бұрын

I had faith in my R/C skills

Paul you shouldn't have revealed the fact that you are using UAV footage that you made. It appears that your UAV may be under the 250 gramm limit and you're flying indoors and you wouldn't have to register it with the FAA. BUT since you have received monetary compensation the FAA considers you are using the UAV (UNMANNED AIRIAL VEHICLE) in the furtherance of a business. Stupid I know but the FAA has screwed up the whole rc modeling hobby ! Since that has occurred you are now breaking the law! You are required to get a part 107 pilots license! And may have to register the UAV (Drone) even though you were flying indoors and definitely if you fly outdoors. Very sad.

@ModelA

Жыл бұрын

Thank you for sharing. I figured this comment would come up eventually. I am a patriotic American who opposes the trendy shift to socialism and oppression. I would rather die than give in to the new socialist FAA rules for flying model aircraft. That's why I quit the AMA after many decades as a member. If the FAA wants to come on my property and pull their "I'm the government, bow before me and respect my authority" garbage, they are in for a big fight. I have been flying Model airplanes for 50 years. If they think they can stop me, let them try. Those commies can go pound sand. They have no idea how hard I will fight.

Was wondering why you don’t talk about the model T with the different between them . I’ve watched about 90% of your videos and I wish I could own one . Love these old gals thank you

@ModelA

Жыл бұрын

You mean like this? kzread.info/dash/bejne/jI1mz8yLmqi-Y7A.html

Paul , quick question ? should you adjust the clutch after revving the car up till all the gauges on the dash get " fuzzy " & then dumping the clutch to bring the " THUNDER " ?? one might ask ones self " hhhhmmmm ???? KEEP UP THE GREAT VIDEOS, VERY INFORMATIVE !!! THE MACK GUY

@ModelA

Жыл бұрын

Hahaaa!! Ummm yes?