Thank you Peter! I drive a 93 xli corolla and allready found usefull information in your videos. Greatings from Portugal.

@PeterFinnTheCarDoctor

8 жыл бұрын

+Jose Santos Many Thanks for comment !

I have a toyota corolla bigbody gli 95 model..I'm watching all your videos and it helps me a lot..thank u so much sir peter

@PeterFinnTheCarDoctor

4 жыл бұрын

Glad to help

Peter Finn you are a genious, thanks a lot it helped me so well, I had a fuel economy problem due to a hig rpm now my problem is solved thanks to you man Have a good day

@PeterFinnTheCarDoctor

6 жыл бұрын

Thank for comment. :-) BR. Peter

@MrCHEMAI44

3 жыл бұрын

I also have the same problem. My rpm is at 1200...I hope I'll make it to adjust it tomorrow.

@mikerukwava9574

3 жыл бұрын

@@PeterFinnTheCarDoctor So which one is good high or low. What is the good idling speed on the rpm meter

I have a 94 GLI and my Idle is very low right now, thank you for this informative video Peter! Great content as always!

@PeterFinnTheCarDoctor

3 жыл бұрын

Thanks for watching!

@waltraut

3 жыл бұрын

@@PeterFinnTheCarDoctor my engine is getting very hot, can't even touch the hood after a drive, but it shows that the temperature is still in the normal level. Radiator and water pump are also ok. What could be the problem?

@dreamdreamland6783

2 ай бұрын

I had same issue, after replaced map sensor, air temperature sensor the idle went to the normal

awesome Peter!!! THANK YOUUU MY FRIEND!!

@PeterFinnTheCarDoctor

8 жыл бұрын

+Frikii Martinez Thank You for comment. :-)

we have the same car, i got a '94 gli...thanks for this informative vid my friend!

@PeterFinnTheCarDoctor

8 жыл бұрын

+jeriel tristan c. Pasion Thanks for feedback. :-)

I have a 1987 toyota corolla with a 1.3l fuel injected engine (E2-EFI). Is the adjustment similar or does it have some big critical difference?

Thanks for the useful information Peter...

@PeterFinnTheCarDoctor

8 жыл бұрын

+Ferdie Roxas Thank You. I appreciate Your feedback.

God bless Peter Finn, you help us a lot and save our money, from Tanzania

@PeterFinnTheCarDoctor

3 жыл бұрын

Thank You.

Thank you so much sir..its very helpful really..god bless you

@PeterFinnTheCarDoctor

4 жыл бұрын

All the best

I was just about to do this, but found my problem. vac leak on the A/C idle up valve. was idling around 2000, now its back down to around 1000. Its still a little high, I'd like it around 700-800 but I can live with it now. cheers!!! If I don't find any other vac leaks I may still end just adjusting it. Thanks for the Video!!

@PeterFinnTheCarDoctor

7 жыл бұрын

Thanks

Sir you saved me a lot of bucks DIY.

Muy bien lo que enseñas Exelent your video

@PeterFinnTheCarDoctor

6 жыл бұрын

Thank You. :-)

This is a very informative video, Peter. Does my 1996 Rav4 have the same adjustment? Thanks.

@PeterFinnTheCarDoctor

4 жыл бұрын

Yes it does

How do I adjust the idle speed if the trottle body does not have an idle screw?

thank you for the demonstration.

@PeterFinnTheCarDoctor

8 жыл бұрын

+Robert Dickinson Thank You. I appreciate Your feedback.

Good video tutorial. Will try this. Been struggling with my idle lately. God bless.

what about the adjustment for the aircon IDLE UP? how can i adjust ?

thank you sir ilake your vido and iwach everday pleas make more vido thank you so much

@PeterFinnTheCarDoctor

8 жыл бұрын

+Muse Ali Thanks Ali Muse. Good work !

@iftinchanneliftinchannel682

8 жыл бұрын

icant get your phone so that icant ask you any car question pleas

@iftinchanneliftinchannel682

8 жыл бұрын

Ican iget you phone number so icant ask you any car question pleas iam new machanic so help me pleas

Hi peter finn, can you make a video regarding the right setting for Throttle Positioning Sensor?

@PeterFinnTheCarDoctor

11 ай бұрын

Yes and Thanks for comment. 😃👍

I had an issue on my toyota vios model 2003 when i service my throttle body. The rpm going high on 2000 rpm, and i decide to sent my car to service centre cause i expect it has to be reset. After the reset, the rpm still on 2000 rpm and the mechanic adjust the idle speed to low and he suspect my vsv is dead. After i run it by drive my car for a while...my rpm going to normal. My question is, should i adjust back my idle speed to normal? Because the mechanic set it to low...but rpm is on normal idle 800 or 900 rpm idle...thanks

Thanks for your sharing brother,very² useful

@PeterFinnTheCarDoctor

3 жыл бұрын

Glad it was helpful!

Hello Peter is it possible for you to send me one of these toyota corolla speed guage cluster lioe your corolla? I have 1.6l 1993 corolla with 131K km on it, when I try to give it gas to speed up there is no response and it does jot downshift, it slowly pick up speed. Someone recommended ignition coild replacement. My car also idles high rpm so when i shift in drive, the car jerks hard to engage in drive, it almost died onbme twice but never died and it never happened after that but the lack of power continues. Can you please advise.

Hi Peter thanks for all your videos. I have a 1994 Toyota Celica ST with 165,000 miles and have some idle issues. The idle is great in Park and in neutral but if I am at a stop light or any other situation where I am in Drive and stopped my idle wants to drop pretty low and the car vibrates a lot. Do you know of any things that could be wrong or what I should check for with this odd issue?

@PeterFinnTheCarDoctor

7 жыл бұрын

There is idle speed sensor in throttle body. So, replace new or better throttle body.

@divineavengers

7 жыл бұрын

thank you Peter I will look into it

@divineavengers

7 жыл бұрын

is this part also known as the TPS or Throttle Body Sensor these are the ones I can find locally by name

@TheLegend-pi4yj

6 жыл бұрын

Did you figure it out? I have a 95 corolla with the same exact issue. It idles rough and sometimes stalls out, but it drives fine

@sandravossen7029

3 жыл бұрын

I'm having this same issue on my 94 Corolla. Did yall figure out what the issue was?

What to choose 4Afe or 7Afe A / T?

What if cant adjust for that part.. very high rpm.. what should i do??

hi peter, I have 1992 toyota corolla and it seems it doesn't have such adjuster screw. By the way, the idle is high, about 1300-1500 rpm. I already clean the throttle body, but still no luck. Any suggestion / comment is really appreciated. Thanks

@PeterFinnTheCarDoctor

7 жыл бұрын

Hi, you need to replace idle speed valve. Look video: kzread.info/dash/bejne/hmh7urWBf8eYfbg.html

Thank You!

@PeterFinnTheCarDoctor

8 жыл бұрын

Thanks ! :-)

Great video! But Peter, What is the 2nd tool you use called?

@thebiz909

3 жыл бұрын

I think it's a torx key (wrench)

@scotfree2518

4 ай бұрын

It is called a hex bolt wrench

Allen wrench is L shaped with 6 sides. speed up the idle speed turn the Allen wrench clockwise. Lock it in by using the end wrench clockwise to tighten the setting fixed.

@PeterFinnTheCarDoctor

4 жыл бұрын

I read your comment. Thank You. 👍😀

The iddel speed!

Why is the idle speed going up and slightly down at the end of the video?

Hi Peter, Jus seen your video today. So far could you support in advise detail further of why do we need to adjust it please? As I have long year used with corolla Year 1994 but don't really know about that yet. Thanks for sharing!

@PeterFinnTheCarDoctor

Жыл бұрын

Watch the video

Thanks what would be the recommend set Revs to set it at ?

@PeterFinnTheCarDoctor

8 жыл бұрын

800 revs.

@makhines431

8 жыл бұрын

peter..you can adjust the screw on the idle sensor right? the 2 screws?

Boa tarde, grande abraço eu tenho um Corolla ano 99, está com 1100 de rpm, bom saber que naquele lugar tem algum tipo de ajuste. muito obrigado

@PeterFinnTheCarDoctor

2 жыл бұрын

👍

I have a 93 Toyota corolla hatch auto and when I drive it's fine but put it in park when I stop it revs high bout 2500 rpm what could it be

Hi Peter, im fixing my old corolla 4efe no problems on checking engine, but always have problems with the idle in the morning

@PeterFinnTheCarDoctor

6 жыл бұрын

Hi, please replace new throttle body.

so I have a Toyota tazz 2002 ..so I'd like to know...why is there oil at the bottom of the spark plugs when I remove them ? ...I have Tue problem with over fueling ?...I tried the thing with the idle screw that didn't work ....so I want to know to cut fuel is it clockwise anticlockwise?

@PeterFinnTheCarDoctor

6 жыл бұрын

Hi, cylinder head cover gasket leaks. Replace it.

i hv a toyota Ti Carina, where i hv found 'ECT PWR' button & 'ECT Menu' button near transmission, but i dnt knw what these button actually do?? Can u please tell me the function of these button...

@PeterFinnTheCarDoctor

7 жыл бұрын

More power

I wish someone had a Toyota Corona 1988 ST170 so i could see how to change the idle speed on my car. Mine is different to this it has two wires connected to a wheel that when you press the accellerater the wheel moves and the car revs.

@PeterFinnTheCarDoctor

7 жыл бұрын

Thanks for feedback. :-)

Is it same for Carina 2c 1974 engine

@PeterFinnTheCarDoctor

7 жыл бұрын

Thank You, :-)

Shouldn't you have waited for the engine to reach normal operating temperature before starting any adjustments? Because if at that temperature, the ECU might still be making settings for the engine to run at fast idle.

@viktorialis9675

2 жыл бұрын

there are no ecu's in these cars

@salnge140

2 жыл бұрын

@@viktorialis9675 This car does have an ECU

@tonyjoseph5030

2 жыл бұрын

@@viktorialis9675 bahaha

@kapilsds7

2 жыл бұрын

@@viktorialis9675 Today i had repaired a ecu of Toyota Corolla 95 and if you still drive that type car please recap ecu. That ecu is full of mess with leaking electrolytic capacitors. Etched copper paths of pcb thanks for capacitor juice. needed capacitors are 100uf 10v-1, 220uf 10v-1, 47uf 63v-1, 33uf 35v-1, 47uf 50v-1. Thanks me later.

@brandongraham2552

2 жыл бұрын

We might not be here THANKS!!

Hi Peter!! Im having an issue with my 88 corolla 4wd with the 4A-F engine. When the car is hot it will occationally miss in idle and run rough. The idle is 1000rpm. Cold start runs fine but the idle is very high. When Im driving the car it will hesitate or miss in 4th and 5th gear when accelerating. When i accelerate in 2nd and 3rd gear i havent noticed an issue. The car has sat for a long time. I recently added 10 l of new fuel and replaced the timing belt, sparkplugs and did a general service. I cleaned the ignition rotor and cap. Im not familiar with the 4A-f engine. I have 2 other corollas that are older with the 4A engine and 3A. What should I check and see what can be wrong? Thanks in advance, Esa.

@PeterFinnTheCarDoctor

7 ай бұрын

Thanks for sharing 👍

Peter would this be the same for a 1992 Toyota Paseo. Thank you

@hkst51rturbocharger13

2 жыл бұрын

yes it would be similar if you have an efi engine

Hello sir, can you make video on how to adjust air/fuel mixture in 4afe engine?

@PeterFinnTheCarDoctor

3 жыл бұрын

Will try

@jynxrides3945

3 жыл бұрын

It’s ecu controlled.

Hi peter, I have a 2002 corolla S. Check engine light is on, giving me code p0301, ( misfire cylinder 1 ) After replacing the coils, spark plugs and fuel injectors, code p0301 keeps popping up. The car shuts off when I’m in reverse. I inspected the fuel pump and my battery everything works fine What could be the problem ?

@PeterFinnTheCarDoctor

4 жыл бұрын

Maybe low Compression in piston

An update, this is not fully correct. You have to wait for operation tempature and then short the TE1 & E1 at diagnosis port before adjusting the screw. By shorting the TE1 & E1 the ECU will not perfrom any idle up so you can setup the lowest idle rpm when hot, it should be 800-950 rpm depends you are fully stock, manual transmission, light weight flywheel or you don't want a second drop of rpm when AC kicks in. For the repair manual it suggest 800 rpm but for me i set it to 950 rpm so it never fall below 700 rpm even sudden clutch in or AC kicks in when hot (when AC is on the ECU will adjust your idle to 800 rpm no matter how low your idle is) If you don't short the TE1 & E1 and just adjusting the screw like the video, the ECU will later lower back the idle for you using the Idle Air Control Valve (IAC), then you have to back and forth the procedure until the IAC is fully closed and ECU cannot even lower the idle for you

@PeterFinnTheCarDoctor

10 ай бұрын

👍

@FarhanAlam25

2 ай бұрын

Bro! Are you sure we need to short TE1 & E1 first? Before adjuting idle screw... From my knowledge and experience, when shorting TE1, E1. Idle rpm increases. But don't remember, it decreases or stays same rpm. Can you please reply

@kevin82499

2 ай бұрын

@@FarhanAlam25 of coz u have to short TE1 & E1, or else the ecu will shut the idle up to compensate the screw u just adjusted later. Even with TE1 & E1 shorted, it still aim for idle 700 for ac off & 800 ac on. if u want higher idle u need to do this several times until the idle up is completely off, and then will be ur desired idle

Hi Peter, can please help me to fix my Toyota sprinter 1996 idling problem? Once I take off my foot from gas paddle then straight my car off and RPM goes down to 300-400. I already cleaned throttle body, put new spark plugs, put new air filter. It’s so annoying

@PeterFinnTheCarDoctor

4 күн бұрын

Thanks for comment 😀👍

Hey Peter Finn. I have a ae101 with a 5A engine. I know my idle valve is stuck cause I've seen it. I just got a new throttle body to replace it. Will this help my idle low problems? It runs low when ac is off and extremely low when on.

@PeterFinnTheCarDoctor

6 жыл бұрын

Yes, it helps. The idle valve is inside the throttle body.

@andrebobb7384

6 жыл бұрын

Peter Finn well now its changed it runs good but now when the ac is on the rpms dont drop not increase. What is the cause of this?

@PeterFinnTheCarDoctor

6 жыл бұрын

Maybe better throttle valve

@andrebobb7384

6 жыл бұрын

Peter Finn How do you fix that issue?

What is the Job of the IAC valve then? I have 5a fe with high idle rpm

@PeterFinnTheCarDoctor

9 ай бұрын

Much appreciated 😃👍

Thanks

@PeterFinnTheCarDoctor

5 жыл бұрын

Thank You Sir.

Is it better to set idle when the engine is hot or cold because automatically the idle is higher when engine is jus turned on

@PeterFinnTheCarDoctor

4 жыл бұрын

Good comment and Let's All folk discuss more 👍😀

@liburdgaston4217

4 жыл бұрын

@@PeterFinnTheCarDoctor sorry but it had to be a question not a statement am not a mechanic was jus asking the question..But jus saw i forgot to put a question mark..👍

Hey Peter what can cause my engine to shake when ever the ac is switch on ? 5afe engine btw.

@Dzan11

4 жыл бұрын

did you find a solution to this or the cause of it?

@jimmeldoyle1374

4 жыл бұрын

@@Dzan11 yes it was not getting the signal from the brainbox. Check wiring or brainbox.

So if my car is idling around 3k rpm by adjusting this I should be able to lower it to where it needs to be

@PeterFinnTheCarDoctor

11 ай бұрын

Thanks for comment 👍

what if the idle is not change when rotating that screw?

@PeterFinnTheCarDoctor

6 жыл бұрын

Ok, then throttle body is bad

Hi...may i know why 4afe corolla rpm around 600 when in D....when in N it is 800.

@PeterFinnTheCarDoctor

Ай бұрын

Good comment 👍

Trying on 1990 corolla wagon dx

@PeterFinnTheCarDoctor

Жыл бұрын

👍😀

How to repair RPM meter

I adjusted the screw both ways a few turns and the idle didn’t seem to change. Is there something else I can try to get idle speed lower? It’s stuck at 1200. Thanks!

@PeterFinnTheCarDoctor

Жыл бұрын

I have read your post, good comment 👍

@lorenzowong1980

11 ай бұрын

Look at the end of the screw you're turning with the Allen key... It should touch the bit which moves the throttle cable

@kevin82499

10 ай бұрын

Check any vaccum leak, water temp & it's sensor (the one to ECU not the the one to cluster or the raditor fan), ignition timing also. If all checked then maybe capacitance leak inside the ECU casuing it failure

this gent is awesome!

@PeterFinnTheCarDoctor

6 жыл бұрын

Cool and Thanks. :-)

6 corner tool- allen wrench

@PeterFinnTheCarDoctor

3 жыл бұрын

Thanks👍

is this the same for a 1996 camry?

@PeterFinnTheCarDoctor

8 жыл бұрын

+Alex Benitez It is different. Sorry.

Hi sir.. I lost my idle screw.. may I know what is the size of it?

@xolisatukutezi9611

3 жыл бұрын

Loop with

how about unser model 2004 ?. tq.

@PeterFinnTheCarDoctor

8 жыл бұрын

+Agus Salim There is screw too ! Adjust it.

@agusta66

8 жыл бұрын

Tq very much Peter yr info.

You adjusting the wrong screw. U will screwed up the TPI sensor alignment. U should know how the IAC works and what voltage required on the electromagnets inside during cold idle and warm idle. During cold idle , I measured about 8V and the RPM was in 1.5 and the IAC valve is open little bit After warm up ,the voltage is O volt meaning the IAC valve is totally closed

@PeterFinnTheCarDoctor

7 жыл бұрын

Thanks for comment.

hello sir, my Toyota corolla 4a-fe 96 model, has high rpm idle at 1,250. when I lower the idle, it returns up by itself, I had the engine throttle body and IAC cleaned already, but still the same.. any idea what's wrong sir? thank you

@PeterFinnTheCarDoctor

7 жыл бұрын

Hi, your idle speed valve is stuck.

@slayer7003

3 жыл бұрын

or the TPS sensor

hey petter... i have the save engine...when i press the accelerator.... engine race takes time rise up...can u please suggest me a solution thank u :)

@PeterFinnTheCarDoctor

7 жыл бұрын

Many issues are possible. Have you replace spark plugs, air filter.

@sadiqulislamshihab2140

7 жыл бұрын

Peter Finn ... yes i did :(

@sadiqulislamshihab2140

7 жыл бұрын

okay oops sorry.... mine engine is toyota premio 2008 vvti.... now plz give me a solution..what should i do?

i have a problem about my corolla 95 model.. idle rpm go up to 1400 when a/c i open the rpm will go down to 1000

@PeterFinnTheCarDoctor

5 жыл бұрын

Yes

@hanglze

5 жыл бұрын

@@PeterFinnTheCarDoctor is adjusting the idle will lower my rpm?

@ricksays7133

5 жыл бұрын

Clean your throttle body valve with a carb cleaner or air intake parts cleaner. Check all your vacuum hoses and air intake hose for leaks and damage. Check if your coolant temperature sensor is bad. There are videos on how to do these in KZread and in Mr. Finn’s channel.

Is this a 2.2l 4 cylinder or 6 cylinder engine?

@PeterFinnTheCarDoctor

Жыл бұрын

4

@davea5150

Жыл бұрын

@@PeterFinnTheCarDoctor 4 cylinder

My speedometer on dashboard comes on and off on toyota corolla 1999. how to fix?

@PeterFinnTheCarDoctor

8 жыл бұрын

+micjony21 Hi, replace new dashboard.

@micjony21

8 жыл бұрын

I scanned the car and it gave me a velocity sensor error, do you think this error code is causing this?

@PeterFinnTheCarDoctor

8 жыл бұрын

+micjony21 Hi, your cars speedometer sensor could be damage. I will do new video in future.

Sound bird 👍👍👍

@PeterFinnTheCarDoctor

3 жыл бұрын

Glad it was helpful!😊👍

Hola tengo un corolla de 1996 cuándo lo dejo en parking o neutro queda acelerado que podra ser lo que ocasiona esto.

@geraldvg1402

3 жыл бұрын

Hola, es el mismo problema del video o tienes el tps p aire valve control que limpiar

@m.m.1561

3 жыл бұрын

@@geraldvg1402 cómo lo limpió amigo?

@geraldvg1402

3 жыл бұрын

@@m.m.1561 con líquido de limpiar throtle body y un cepillo de dientes. Hay varios vídeos

My speedo meter and rpm not working!how can i fix it?

@PeterFinnTheCarDoctor

4 жыл бұрын

New dashboard. Good comment and Let's All folk discuss more 👍😀

If I do this? My question is ? will the car spend more gas? Will my engine get damaged?

@PeterFinnTheCarDoctor

11 ай бұрын

Engine works like before

My rpm doesn't reach 7000rpm what might be the problem

@PeterFinnTheCarDoctor

10 ай бұрын

Hi and Thanks fo rcomment. 👍

i cant find that bolt on my celica with a 7afe engine

@PeterFinnTheCarDoctor

3 жыл бұрын

Ok

what is the oem no for iac valve thanks

@PeterFinnTheCarDoctor

6 жыл бұрын

Hi, I need to investigate

انا عندي ما ينزل واحد ونص

diddle speed is much nicer thank you

@PeterFinnTheCarDoctor

3 жыл бұрын

You bet!

i have problem with vent it wont work

@PeterFinnTheCarDoctor

4 жыл бұрын

Thanks for comment. 👍😀

It's an Allen wrench- the 6 cornered tool.

@PeterFinnTheCarDoctor

8 жыл бұрын

+Robert Dickinson Thank You. I appreciate Your feedback.

Hurt my soul that he starts it without any of the air housing in

@PeterFinnTheCarDoctor

3 жыл бұрын

👍

That would be widely known as an allan key.

@PeterFinnTheCarDoctor

9 жыл бұрын

rebelmaderighteous Thanks for feedback.

@jcccm0584

6 жыл бұрын

i think you mean "allen" key?

@paulmitch6057

5 жыл бұрын

Also an 8mm ring spanner!

Today i had repaired a ecu of Toyota Corolla 95 and if you still drive that type car please recap ecu. That ecu is full of mess with leaking electrolytic capacitors. Etched copper paths of pcb thanks for capacitor juice. needed capacitors are 100uf 10v-1, 220uf 10v-1, 47uf 63v-1, 33uf 35v-1, 47uf 50v-1. Thanks me later.

@PeterFinnTheCarDoctor

2 жыл бұрын

Thanks 👍

@dvidgonzales8376

Жыл бұрын

Can you solder leads to caps

THIS IS NOT THROTTLE ADJUSTMENT!!!! That is so not ok! AISAN (Yes aisan not aisin) Throttles for Toyota SOMETIMES have a screw to adjust idle speed but it's under the rubber (right corner on top if You looking a fron of 'pipe' to manifold)! If Your throttle have no rubber in a corner that means this throttle has no screw to adjust!

@PeterFinnTheCarDoctor

6 жыл бұрын

Thanks for your info.

@ricksays7133

5 жыл бұрын

I got the repair manual, which does mention about that right corner top screw. That is true for 4A-FE engines . The 3S-GE/GTE and 5S-FE engines as you see here in this video has it in that complicated spot.

Edel Spid

@PeterFinnTheCarDoctor

5 жыл бұрын

Ok

You really should take this down - this is not the idle adjust screw, it is factory set and should not be tampered with. My son screwed up his throttle body adjustment following this. If people have an idle problem with these cars, they should check for vacuum leaks first, then the TPS, and the idle air control valve.

@PeterFinnTheCarDoctor

7 жыл бұрын

Thank You for comment. Best Regard Peter Finn

@TheBlackShadow270

7 жыл бұрын

There is even a disclaimer at the beginning of the video! Tell your son to take info on the internet for what its worth.

thanks but i think your words and accent make this vodeo very very confusing. maybe its much better if you just put subtitles

bugger - my corolla has a carb

@PeterFinnTheCarDoctor

8 жыл бұрын

OK and Thanks for your comment. :-)

@melisaali2010

7 жыл бұрын

The Wide Open Life

You don't have to take all that crap off to get in there.

@PeterFinnTheCarDoctor

8 жыл бұрын

+Phixeas Thanks for feedback. :-)

Could you please guide me what the exact reason for my wired idling RPM. It’s 1988 corolla AE95 ‘4WD’ - 4AFE There is only 2 days between the 2 shots in my video: kzread.info/dash/bejne/daV7ptGuldGnfdo.html Any help Would be very Appreciated 🙏🙏

@PeterFinnTheCarDoctor

6 ай бұрын

Noted 👍

@temp78980

6 ай бұрын

@@PeterFinnTheCarDoctor Have you seen My video? Could you tell me how to fix, any idea?

You are giving advice,but you don't know what an Allen wrench is???

@PeterFinnTheCarDoctor

4 ай бұрын

Thanks Buddy. 👍😀

Terrible

@PeterFinnTheCarDoctor

Жыл бұрын

Noted