Literally the most simple explanation out there...thanks

Short, simple and straight to the point. Thank you so much for this informative video.

Thanks that was the best explanation on replacing and screwing in with the left stop set.

Best video yet. Keeping it simple and short. Thanks

@valoreehamilton949

Жыл бұрын

Great video! Had all of the steps I needed in a short, easy to understand clip. Thanks!

Good job man simple explanation

abut to make some of these on PVC piping this is what I needed to see ty

They have a slip clutch in them so you can just manually turn it without having to unscrew it.

@lawrencerichardson9108

11 ай бұрын

Ok I thought so

👌

Need more detailed explanation for a non handyman. Please I would be very grateful

Just force it to the left til it’s where you want, turn to the right to find your right and add or take off angle if needed. Way simpler and faster

Only the 5000plis has the slip clutch. Old style is as it shows in video. Tested it today. Had to unscrew old style as shown in video. What a pain.

Thank you

You have to physically move the base to set you left stopping point. Then use the screw to adjust right stop.

The part where you put the flat head screwdriver in, for my sprinklers the screwdriver goes all the way in deep and I can’t see or feel what to turn 🤷🏻‍♂️

Can I adjust how far forward it goes? Mine is spraying a tree in its pathway

Thanks ! I can do it by myself now. 😂😅

I have this exact sprinkler head and it’s going in a 360° motion. I only want it 180° as it sits against a fence. This video did not address how to adjust to just a half circle.

@letsbuildit_diy

24 күн бұрын

You may have a 360 degree sprinkler head. If so you would need to replace the whole sprinkler to one that is not a 360 degree.

KZread has its uses. Thanks

hello friend how much 5000 size cost

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

This works on the 32SA i imagine?

👍

They don't seem to be in the ground deep enough though

@reapercrew8474

Жыл бұрын

I think because he’s trying to compensate for the curb

@Alarmo05221

Жыл бұрын

If the sprinkler is behind the lawn edge curb, it is usually wise to have the sprinkler raised a bit to work with the curb and not ruin the rain curtain these rotors have

How u make it to go around all the time

@letsbuildit_diy

10 ай бұрын

You can buy rainbird 5000 that are 360 degree sprinkler head or you can adjust the back of the sprinkler with a flathead screwdriver by turning it towards the positive sign

Easy to set the left when you can easily access it to unscrew it. Pain in the butt if you can’t.

sorry, no. incorrect

These rotors are the worst ones I personally use k Rain pro series or hunter rotors