If you guys are afraid of bringing a knife anywhere near your steels to get the covers off, i've found that you can actually slide a plastic credit card (I use a Best buy gift card b/c of its shape) in between the plastic and metal and it will simply pop apart if you slide it across the panel.

@SoapNugget

4 жыл бұрын

Does it work for the spine

@WalkmanWillWalkAllOverYou

3 жыл бұрын

@@SoapNugget After waving a Hairdryer over it for a Few Minutes and being careful in removing it then Yes.

Thanks Tyler! Took a minute to find good pics & perfect printing but I think my result may even be better than the factory steelbook inlay.

I have done a lot of woodburning art. Hilariously, I have always loved steel books but never thought I could get it done without spending a lot of cash, resources, etc. Now I am interested in creating artwork on steel books today.

Really cool Green lantern tatto in your fingers man, soo cool 👊

Recently I bought the batman vs superman's steelbook with the cover made by jim lee, its like a comic style, and the plastic part, it came upside down, so your video will help me to change it, thank you so much

Wow! The cover art itself was what caused me to choose to order the French Batman Steelbook rather than that one, and seeing that the inside is totally bereft of artwork makes me even gladder I did! And to top it all off, it cost less than some places sell the U.S. version for, and the same amount as the places with the lowest price among the bigger companies.

I did it with the IT 1990 Steelbook and although I used normal paper it looks pretty good

This changed my life thank you!!!!

@YourMovieFix

7 жыл бұрын

Film Fancy Glad I could help!

Very impressive! I’m about upgrade some steelbooks! Thanks!

That's dope I'm definitely doing this to some of my steelbooks

Wow looks professional 🤯👌✨

I used a steamer to remove the spine, do you know where I can buy the enteral plastic part. Let’s say i have more then one Blu-ray’s that I would like to store in the Steelbook.

Try using a roto-trim for cutting paper, they are expensive but gives you much more accurate cuts

So, I’m using the template you have linked and the latest version of the gimp photo editing software, but I’m having issues printing. It automatically defaults to a much smaller size. I can enlarge it in the settings, but I don’t know exactly what dimensions I need to be using to get the right size printout. Do you know the printed width & height? Also, what size paper do you recommend?

@skyblaze55555

Жыл бұрын

It sounds like you need to change your printer settings.

Hey,I love your court mask

Definitely been thinking about and keen to do this but I'm still not sold on or feeling comfortable with the spine part. I'm thinking maybe just sticking the printed spine bare & directly on the inside on top of the plastic or even laminating the spine and then stick it directly on the inside.

@YourMovieFix

3 жыл бұрын

Just doing that part is very easy, and can add a lot to it

@mrn234

9 ай бұрын

Try it with 2-3 cheap ass steels that you buy second hand.

i did the steps you showed within the video however when i exported the image it didn't save it as it would into the template form. it just saved as if it was a regular image from the original. how do i solve this issue? im using a mac os.

@JustInCase_007

2 жыл бұрын

Same

Great video men!!!

Great video. But why is the template so low resolution? My printer kept printing at a very small scale. I had to increase the size of the image and template.

@rickwj324

11 ай бұрын

I was just thinking the same thing. It's a very small scale. You shouldn't have to UPSCALE to print. It's better to start from the actual size. I'm looking for a proper template but don't see one to download anywhere.

Awesome video man big thanks. I hate when the inside is blank. Looks bootleg.

I cannot get this to save with the transparent background for the cutouts. It looks correct in gimp and I export to png but it comes out solid everytime. What can I do?

why is my art coming out smaller than the pixles are when i save it

Awesome video

Hey! I like steel-books but not the disc holder inside, is it possible to remove it and replace it with the standard press release? I always get worried I'm going to break the disc when I take them out of a steel-book.

@YourMovieFix

6 жыл бұрын

Dustin Caldwell Not really, not without an entirely new case made to fit the metal panels. I know what you mean though, they can be a pain. Just press it in, it'll be fine :]

@dustinakadustin

6 жыл бұрын

YourMovieFix thanks anyways mate! should be good.

Would the same thing work on the cover of the steel book?

@Remspamton

4 жыл бұрын

No the fronts engraved

great job, thanx a lot

thanks for the tutorial 👍

Amazing!

I’m gonna have to do this to my HMV exclusive Drive Steelbook

What size photocopy paper did you use?

@YourMovieFix

10 ай бұрын

Just regular

I was EXTREMELY careful to follow people's instructions exactly, and even more careful in the execution of this, and nonetheless, the spine wound up being cut and there was absolutely no way for the X-acto knife to have gotten any higher toward the spine label. Is there any possibility that there are Steelbooks that are made slightly differently that have the spine fused to the plastic? BTW, it was a Steve Austin Collection 4-disc Steelbook that I was taking apart to use the 4-disc plastic for something else, if that helps to possibly identify some exception.

@YourMovieFix

5 жыл бұрын

I've never heard of a 4 disc steelbook. If its thicker I can only think that the spine has more adhesive so it's harder. The only thing you can do is make sure its heated and keep the blade straight and angled towards the metal spine.

@Tsadi9Mem9Khet9

5 жыл бұрын

@@YourMovieFix It turns out I was underestimating how closely you have to look at the thing, as I don't tend to think my near vision is all that bad with contacts, but apparently it isn't anywhere near as good as that of those of you making these tutorials, as I did go back and get it off after putting forth quite a bit of effort toward even managing to slip the blade under the label alone. Once I did get the blade into the right space, it slid through extremely easily even around a half hour after originally being heated. Hopefully the super glue works for repairing the spine itself.

Great tutorial but that link doesn’t get me to the template. It just brings you to the Imgur website

@YourMovieFix

6 жыл бұрын

The link works for me. It will appear like a blank/black image, drag it to your desktop, it will be the correct template.

@Vaderd2k926

6 жыл бұрын

YourMovieFix Thank you!

Did everything but when I print, the image is coming out smaller than yours? I can't figure out what I'm doing wrong

@MrSpencer3123

6 жыл бұрын

same here too

@Aarejayy

6 жыл бұрын

Anoyone find a fix for this? Running into the same problem

@TheKaphwan

6 жыл бұрын

I was having issues with the image size being off when printing. What solved it for me was not printing from GIMP or the Windows Photo App, but printing it from Paint 3D.

Nice one 👌👍

Does the adhesive on the spine harden again to form a good seal?

@YourMovieFix

3 жыл бұрын

I've had mostly good success with it but I advise strengthening with another way also.

@ssbib

3 жыл бұрын

Cheers. I’ve not been brave enough to try messing with the spine just yet. I might buy a cheap one and practice on that in the near Ks for the video.

Help me replace front and side panels

Hey man. I need this template. Can't open it in photobucket

@YourMovieFix

7 жыл бұрын

Try the new link in description!

@driverspod4626

7 жыл бұрын

Got it. Thank you

I wish you showed the exterior spine after you finished. I am apprehensive to do this cause I dont want to mess up the spine. Otherwise very cool!

@YourMovieFix

6 жыл бұрын

Jordan Hoover I could send you a picture when I'm home, but it looks the same as new. You gotta try quite hard to mess up the exterior of the spine haha

@bungmusturd5458

6 жыл бұрын

Thats cool I saw another video and it looks ok afterwards. You dont need to email it. Im having a hard time now when I print the image from the template. After i export it comes out too small on paper. Any ideas?

@bungmusturd5458

6 жыл бұрын

ok I got it to work! I right clicked on the picture and printed from there.

For the love of ZOD lay your Steelbooks down on a cloth. It is very easy to create hairline scratches on the edges.

@illmattie

4 жыл бұрын

FILMinformer84 , same thing I was thinking, damn!

thanks!!!

Nothing works for me. The box template and the scale....

Of course, the most important part is the cup of coffee.

Great video I just subscribe to your channel. 👍

that's an awesome video but you're right, not so confident about the middle part lol

Are the inside the same size of the outside?

@MartinYankov

6 ай бұрын

Slightly smaller than outside

Nice

Awesome 2 do

The height on this is wrong. The image appears too large to fit in any steelbook

Big up

Why doesn't this work for my Terminator 2 Steelbook

yay tyler

Exported the image, didn’t save it in template form. Just saved it as original picture and the print dimensions for the template are off. Every print comes out ~40% smaller…. nice.

Holy crap. My spiderman steelbook turned out incredible.

@YourMovieFix

5 жыл бұрын

Good to know! Wish I could see

Im looking at you bestbuy exclusive infinity war

@Dizyland_

5 жыл бұрын

Ya boi Stxph Uhhhhhh... that one has inside art? Idk what your talking about

@stephano3211

5 жыл бұрын

Dizyland well yeah I know that but the over all steelbook is a disappointment. What I’m sayin is I can put a picture of Thor arriving In wakanda or thanos throwing a moon at ironman over the art work

You should have slammed the coffee down

nvm i figured it out

@kraftysandwich

Жыл бұрын

How? I'm having this same issue

As soon as you said "I can save your Steelbooks"..."I can save your collection"....orgasm..............🙄

You had me... then You lost me at your stove. NOPE. Some of my artless steelbooks are worth too much to do this

@YourMovieFix

5 жыл бұрын

I cant say I blame you. I've dropped some good money on steels. But usually it's the cheaper and common ones without art inside anyway.

@WalkmanWillWalkAllOverYou

3 жыл бұрын

Wave a Hairdryer (at the Hottest Setting) over the Spine for a few Minutes instead before removing.

If its not from the factory it's OH, HELL NO!

-The shining 1980 -Possession 1981 -Poltergeist 1982 -Black swan 2011 -Orphan 2009 -House of wax 2005 -Talk to me 2023 -Cabin in the Woods 2013 -May 2002 -Evil dead & rise 2013-2023 -Vacancy 2008 -Halloween 1-2 1978-1981

Noooo you are doing it so wrong my friend, it’s much easier to open :)

@YourMovieFix

3 жыл бұрын

By all means, share!

@kaynlite1337

3 жыл бұрын

@@YourMovieFix Sure! Send me a pm and I’ll show you sir :)

and for j-card because he is the garbage ???