he needs to watch an area diesel service video on the bosch p7100 pump
@hassanadamudangasu9019 Жыл бұрын
I like this work
@akhtarhussainabbasi29438 ай бұрын
Very nice brother
@irlanmartinstavares3112 Жыл бұрын
Congratulations, let me give you some constructive criticism, when testing an injection pump, first install the caps under the pump and then, lubricate it. Once I was testing a Volvo X 10 pump, low on lubricate oil. The pump almost melted on the test bench.
@whitefox9 Жыл бұрын
Rotating that pump in the vice is annoying and it's like that mechanic has a very small line if vision He can loosen a bolt he can't see It had to be right in front of him to loosen the bolt
@joebaucom45376 ай бұрын
Great !
@abid69ali Жыл бұрын
I couldnt understand why they totally dismentalled the pump while noting to replace. I think the batter way to wash the pump externally first before dismentalling and check for diesel quentities per cylinder.
@andresmontagut7754
3 ай бұрын
Sometimes the pump when sitting for a long time gets dirty from the dried diesel, like a laquer so a good clean and refit is a good solution for it to fully work again, also the pump elements might get dirty too with dirt and oil. It will definitely need calibration to work perfectly again.
@AntoinetteVikpoessa-ec9so Жыл бұрын
Comment obtenir les cales pour retirer l'arbre à cames sous commande?
Пікірлер: 16
Très extraordinaire vraiment ❤❤❤
ASMR for my brain
he needs to watch an area diesel service video on the bosch p7100 pump
I like this work
Very nice brother
Congratulations, let me give you some constructive criticism, when testing an injection pump, first install the caps under the pump and then, lubricate it. Once I was testing a Volvo X 10 pump, low on lubricate oil. The pump almost melted on the test bench.
Rotating that pump in the vice is annoying and it's like that mechanic has a very small line if vision He can loosen a bolt he can't see It had to be right in front of him to loosen the bolt
Great !
I couldnt understand why they totally dismentalled the pump while noting to replace. I think the batter way to wash the pump externally first before dismentalling and check for diesel quentities per cylinder.
@andresmontagut7754
3 ай бұрын
Sometimes the pump when sitting for a long time gets dirty from the dried diesel, like a laquer so a good clean and refit is a good solution for it to fully work again, also the pump elements might get dirty too with dirt and oil. It will definitely need calibration to work perfectly again.
Comment obtenir les cales pour retirer l'arbre à cames sous commande?
Sir stating problem ke liyè kya kare
I have suggestions
Diesel value note same all nozels....
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Like❤