wish someone explained it as good as you did when i was studying. took years to learn this 7 minutes of information.

@MasterTechLou

3 жыл бұрын

wow thanks, I always felt this video was lackluster. But it really is simple. Sure the can data bus is a complicated thing, as far as operation and data but when it comes to diagnosis. I had 1 car in my existence that I actually needed to monitor can data and it still didnt help haha. most failures are shorted modules. Water entry. so in my experience the more complicated the problem seems, the easier it is to solve. I appreciate the nice comments. I will update this once day soon. along with my artwork :)

@RothBeyondTheGrave

5 ай бұрын

Difference between bad & good teachers. Most all things can be broken down to their origin, which is often the main ingredient in understanding the more complex bits that often don't need to be fully exploited like Lou mentioned here. I'm a music teacher & I've got over a decade of great results teaching people things in minutes my teachers sometimes spent months on 😂

thanks, working at a MB dealer and currently have a car with water and chewed can wires under driver side carpet , this helped out ✊🏼✊🏼

@MasterTechLou

3 жыл бұрын

Sweet! What dealer? We probably know the same people. Took me a few years to understand that the more complex a system , the more easy it is to diagnose! Haha

Masterfully broken down to the origin and foundation! As you've already said, digging all the way down the complex hole of EVERY nuance in CAN communication is often unnecessary to properly diagnose. I'm still a "kid" as far as my time doing diagnosis and repair, but in 4 yrs I haven't been wrong yet following this simple & logical approach. Understand the systems you're dealing with!! Thanks Lou ✌️🤘

just made my day thanks man for the simple and straight forward tutorial

@MasterTechLou

4 жыл бұрын

Thank you, I will redo this video , I am not happy with it. I hope it helped.If you need more help you can find me at www.cartechconnect.com thank you.

I’m a new trainee at a Mercedes dealership and this helped a lot

@MasterTechLou

2 жыл бұрын

Glad to help! I will do an updated one soon. Sorry my artistic skills are not the best. Everyone over complicated the idea of CAN and how it works. Its so simple to diagnose. You just have to know what modules are supposed to be on what CAN and what is or is not communicating and its simple from there. Glad it helped thanks for the nice comments!

Thanks for the video it was straight forward and It has Helped me a lot ...

@MasterTechLou

5 жыл бұрын

Thanks George! I will redo it one day to make it a little more seamless, people often misunderstand that the CAN date bus is not a physical object, that its a function. Hope it helps, Lou

Great video, I have an f10 starts then cuts off immediately , I got codes for short circuit to ground on terminal# 15 (1 2 3 N and WUP) also flexray not initiating at the gateway, ohm resistance is measuring 61.02 between 6 and 14 and voltage is positive on pin 16 would the issue be a wire harness or a module failure

Awesome, love learning new techniques

@MasterTechLou

4 жыл бұрын

Thank you for the comments, I will make a better video soon as I can .This one was rushed and I tend to babble. Lou

thanks for sharing your knowledge

@MasterTechLou

3 жыл бұрын

Thank you for watching, I appreciate it. Thanks, Lou

Awesome, im a little slow in understanding but i knw im on the right course with your vedeo. Thks👍👍👍👍👍

@MasterTechLou

3 жыл бұрын

thank you, tried to make it as basic as i can, no need to overthink the system. 2 wires, and little voltage. easy peasy. thanks again, Lou

Thank you. This was the video i needed to see.

@MasterTechLou

2 жыл бұрын

Thank you! Sorry for my lack of artistic skills 😬

@cuttyb

2 жыл бұрын

@@MasterTechLou it made sense. The rest would just be flare

Great explanation

@MasterTechLou

3 жыл бұрын

Thank you, I can and will do a better one, plus work on my art skills haha. thank you for viewing. I hope it helps. Lou

Thank you for the video. Greetings from Germany :-)

@MasterTechLou

3 жыл бұрын

thanks! I appreciate that!

Whatta great guy! Thee best!

Another very good important think is how you check up the faulties in modules when something goes wrong, for example ignition key not switch. How you follow up the procedure

@globalcommerce7654

10 ай бұрын

I did a video of this on my channel, I would critique that measuring voltage on the bus is a necessary troubleshooting technique when problems occur as in my video kzread.info/dash/bejne/nGGcsNZ7gZTNicY.htmlsi=drutvi60dQXKziTo

You make it so simple..I’m the one of many that over complicate this lol…electrical stuff is herd for me to understand..when I get zapped I understand..

Thank you very much, great video very easy to understand. I have a 1999 c280 , can you recommend the best service repair manual for this car?

@MasterTechLou

4 жыл бұрын

Rick Rios buy the WIS cd’s on ebay. Or see if you can find a w202 cd but all I know of is WIS (workshop information system) hope this helps.

Great lesson out there can u pls illustrate more with circuit diagram and faulty vehic

thanks a lots😍😍

Thank you so much sir

Thank you so much!

BRILLIANT

Great info thanks for the video ...i have an issue with c200 kompressor 2008 petrol ...overhead console not working no lights no vanity lights and ac blowing hot air on scanning got a code C14200 ( communication with rear signal acquisition and actution module has a malfunction ) what might be the issue as overhead is controlled by internal can system ...sometimes it work intermittently ..overhead panel lights work on door opening and ac also starts working and then again it won't work any help? thanks in advance

@MasterTechLou

Жыл бұрын

Sorry for your issues, too much going on with your car to be able to give you any advice. Sorry.

Great video, thank you! For 2003 W463 G-wagon, which canbus should i use to enable volume controls on the steering wheel? i bought android radio with canbus BENZ Series CAN box BAGOO. Would really appreciate the answer.

@MasterTechLou

2 жыл бұрын

Should be chassis can. With the steering column module. That would be my guess.

So is it the central gateway causing problems if I’m having intermittent trouble which is not receiving can data from any modules?

@MasterTechLou

2 жыл бұрын

Ok so, if the central gateway was an issue, you would not be able to communicate with other modules. most likely. unless every module has codes stating issue with CGW and then the cgw has no codes or problems with anyone else. then possible.

Hey boss will unplugging the connectors 1 at a time and attempting to atart it still help you find the bad module if the CAN bus cards are possibly bad from water damage, like corrosion on solder points always concentrated at the 3 wire connectir on one end of all 3 CAN bus cards( 2 brown 1 white) Or do i have to buy a new one to even do the test of unplugging the connectors 1 at a time Oh and thank you for your time and your very valuable expertise

@MasterTechLou

Жыл бұрын

Correct if the CAN bus bar has corrosion on it, you will not get accurate guesswork. Have to rid the car of corroded parts.

So just to be clear I should be able to go to central gateway and read faults and it should give me all errors ?

@MasterTechLou

3 жыл бұрын

yes and no, knowing what module is the gateway is what you need to know when you have no communication,

@erickushner9869

3 жыл бұрын

Ok I'm going to check that out

Hello, I have a 2011 gl350 with limited starts. The adblue tank is is filed, but I cannot get rid of the limited starts. My scanner says the CAN is not communicating with the adblue control module. Do you know how this can be fixed?

@MasterTechLou

Жыл бұрын

Hello and sorry for your issue, No I do not because I do not know the information needed to know the fix, and please dont send more info because I do not like trying to diagnose anything in the comments, If you need help you can find me at justanswer.com @Lou Palomino thanks Lou

Hello, I have a similar code. I would like to know if it is that the ism its bad code 010187 communication with the tcm is faulty the message is lost and when i select N or D or R it gears sounds cracking down to where the ism is. thanks

@MasterTechLou

2 жыл бұрын

Hello, yes it’s possible its the ism because the gear position doesnt match the trans.

Man, where were you 3 days ago, I just dropped off my can at a shop. Took my 04 C230 Kompressor through a drive-through car wash and parked to dry off the remaining water droplets. Went to start it back up and no crank. Wakeup, EIS, cluster, and steering wheel unlock all work, but just no crank when turning the key. Checked all fuses and relays (good). Battery voltage (good). Put on my scanner and got these fault codes. 201D-001 Cataytic converter Effect is insufficent [P0420] (**already had this one) 2041-001 N80 (steering column module)CAN/signal interruption 2041-008 N80 (steering column module/The can message implausible 202D-001 N80 CAN message from control module AAC/TAC/CAN signal interruption 202B-001 CAN message from control modules EZS/CAN signal interruption Cleared the fault codes, disconnected the battery for about two hours, and connected everything back up. All codes are gone and will not replicate because I can't talk to any of the modules. I accidentally tripped the SRS while inspecting the clock spring and angle sensor (steering wheel).. couldn't clear that code because there was no communication for the scanner to see the error. I'm at a loss on this one.. There was no water anywhere that I could see.. but the problem happened after the wash and had never happened before.

@MasterTechLou

5 ай бұрын

Sorry to hear, hope it works out for you 🙏

How is it with NTG6 and NTG7? Is it the same? I've tried to read packets using obd2 port but just there is no luck. Even with different frequencies. Thanks for teaching us

Thank you.

Hello, exceptional explication 👍🏻 I want just to know in my GM cobalt 2.2 I changed my Engin control module, now I have any communication with TCM, BCM only with IC where a have some faults. The ECM must be programmed with the new vehicle to give access to the others control module ?

@MasterTechLou

3 жыл бұрын

Hello and thank you. No, programming only affects engine starting. Not communication. So you still have more issues.

This is cool but Mercedes also uses other forms of communication, LIN BUS, MOST, CAN BUS, and FLEX RAY BUS

Hey i have a problem with w205 c220 2016. I readed with obd and in getting error code : u0146 and my dashboard blinks with almost every fault. Do u have experience with this fault code? Whatcould it be?

@MasterTechLou

2 жыл бұрын

Sounds like youre not using a proper scanner. Gotta start with the mercedes scanner

Hey man,I have an issue with a secondary purge solenoid on a w211 e350 merc. I can actuate it open and closed with a bidirectional scanner, but I get the "permanently closed"code,its brand new ,along with a new charc canister new primary purge. Any suggestions?

@MasterTechLou

9 ай бұрын

When you say primary and secondary purge, I dont recall it being called that in any codes. So I’m not sure what to advise

@tibilepes1795

9 ай бұрын

The solenoid on top of the charcoal canister is callled the secondary vent valve I believe,sorry.. that's the one the scanner says is permanently closed. It's brand new,I've tried 3 different new ones all still throw the same code. Changed the canister. Smoke tested ,no leaks. Changed the purge valve in the front. Changed the fuse and relay on the Sam module in the rear that controls the vent solenoid. I'm thinking I have a bad ground or the Sam is bad. Hopefully that's a better explanation. I really appreciate your help bro.

Please I have an issue I was driving my car and then while driving it all the lights on the instrument cluster came on, all lights no single one left out and then car won’t move again while it’s still on. I moved from drive to park then drive to park still no movement then I turned it off and since then it never turn on again. Could you know what’s wrong with it please

@MasterTechLou

2 жыл бұрын

Sorry you are having issues with the car. It sounds like a module failed causing a communication issue in the car. If the car was recently washed or rained on I would check all fuses boxes for water but you will need a scanner to know what modules if any are communicating with the scanner.

Hi, I'm from Costa Rica, my English is very basic! I have a Ml 320 2002, w163, in limp mode, it will be bas esp on .... the problem is that the Mercedes scanner does not connect with the modules ... it only gives "F" in TCM (EGS), ECM, ESP, AAM .... the car starts and everything is fine, it just doesn't go over 2nd gear! Could it happen that a damaged module causes an error in the communication of the others ??? ...

@MasterTechLou

3 жыл бұрын

If you are getting a F that means it’s connected. It depends on what scanner you are using. All modules in the ML163 are soldered together. So if you have a problem with one you have a problem with all.

hi, cuestion, do we check continuity or resistance on hi/low bus circuit? i will be working on a drivers seat problem, shop says drivers seat wont communicate w scan tool, and when passenger seat is operated both seats move, one forward one backwards at same time, so i will start with checking the hi/low bus, but which to know resistance specs. 2016 Mercedes S550, will be looking for Bus circuit board (L) location.

@MasterTechLou

2 жыл бұрын

Hi, if seats move, can bus is working and its not a issue. Yes you can check continuity, problem is the can connectors are not labeled at the connector block. So you just check voltages at the door module or seat module/ seat switch whichever has the can connector. But to me this may be corrosion in a can connector but I think you would have more wrong. I wonder if someone replace a seat module with a wrong part.

@prospexican

2 жыл бұрын

@@MasterTechLou well, i was told they installed a new seat module at ft drivers side, and it is the same exact part number as the passenger ft. I hope and is the right part, reason for replacement, module was missing, any way i was getting around 60 ohms at can low and high w drivers module disconnected, pins 29 and 30, and also 26 and 27, but for some reason the 29 and 30 was showing cero ohms at times and finally stuck at cero, so i measure continuity to car body and shows continuity, so most likely you right, probably is going to be a moisture problem at can B connector. since circuits 29 and 30 are going to lt interior can B potential distribution electrical connector. thanks a lot, i will be working on that vehicle tomorrow.

@MasterTechLou

2 жыл бұрын

@@prospexican if they installed a new module its very possible it was previously coded for another car. So check that as well. If the issue didnt happen until A new module was installed its most likely that module

@prospexican

2 жыл бұрын

@@MasterTechLou i cant get communication to drivers seat module, all can bus show 2.4 to 2.7 volts inn and out. i hear sometimes sam modules cause no communication to some modules will do a research on it, code U021087 does not want to delete. and sometimes shows u119087 lt MKS control module faulty. but the hard code is the 1one related to no comm with Drivers seat control module, i did called the dealer and it is the correct part number.

@guille79bcn

Жыл бұрын

​@@prospexicanin Audi, some seat electronic modules are coded electrically... there is some ground points in connector pins that tells to the Ecu in wich side is mounted.

Hi ! Thanks for your videos . In a gl x164 there is an eis and central gateway .which one is the master to transfer infos from different modules . The car starts fine .the c can is good .com to central gateway is fine but no com with eis cluster and all comfort modules ( water intrusion ) .I think there is a bad module who shut off the com to the eis but again the central gateway is good but comfort can is dead . Thank you

@MasterTechLou

3 жыл бұрын

the CGW is the brains.

@bgfrdqf44

3 жыл бұрын

@@MasterTechLou thanks ! Today I only connected the eis and cgw. Good com with cgw but no com with eis .

@bgfrdqf44

3 жыл бұрын

@@MasterTechLou thanks ! Today I only connected the eis and cgw. Good com with cgw but no com with eis .

@MasterTechLou

3 жыл бұрын

@@bgfrdqf44 www.cartechconnect.com if you need help. Be safe. Lou

@guille79bcn

Жыл бұрын

Hi mates; I'm working in a w164 with the same problem... the communication with drivetrain and Gateway it's ok, but it's impossible to acces with any confort module. No blinkin lights, no pass lights, washers no works, but there is communication with steering wheel electronic module. No faults, only in ABS is stored 1 related to problems in coherence signal from buttons locateds in central area of the dashboard. There is communication between doors (I can open and close all the windows from the driver's buttons), and if I perturb the Can signal in Clima, some alerts appears in the Instrument cluster display. The Can signal measured in Clima is correct. With the osciloscope low and high are mirrors between 0 and 2'5 in L and 2'5 and 5 in H. In this case, and if I'm not wrong... if Gateway is independent to Sam, is Gateway the unit faulty? Thank you very much for the video, and best regard's from Spain; Guille

i have a w220 2004 s500 keep getting a message that says “display defective “ visit workshop when it does occur the passenger window and seats stop working and one headlight stops and airmatic pops up too when it happens. whats that?

@MasterTechLou

4 жыл бұрын

K.R. Can data bus issue. You have a bad module corrupting the data signals. Check the car for water.

@krtherapper

4 жыл бұрын

Benz-Tech Lou P. car seems dry though i changed my instrument cluster and never programmed it could it be that?

@MasterTechLou

4 жыл бұрын

@@krtherapper not likely. display defective means the data you are reading is not correct as the data bus is corrupted. in fancy terms. I also do not dive into diagnosis via comments, so please dont be offended with my somewhat generic replies. but if you need help you can find me on my website,. I can surely help you with this if you have the right scanner. Lou

Hi, Nice explanation. I have a 2007 Gl450 and there is no audio/sound from the radio/cd. The command turns on fine and appears to be running fine both on radio and cd but there is no sound from any of the speakers. Before there would be sound for about a min when starting in the morning and then nothing. Now there isn't any sound at all. I pulled almost every module in the car and opened it up to check for water damage--none found anywhere. Only one fault code: "incorrect can message from control unit n80" which is the steering control module. I replaced the clockspring and the module above the clockspring with OEM units from the dealer. Still there is no sound. I'm guessing the fault might be in a wire or a ground connection somewhere. Any thoughts? Where can I get the wiring diagram for the CAN bus for this car? Thank you.

@MasterTechLou

3 жыл бұрын

Audio does not work on the can bus. Its a different animal. The most common problem is a glitched satellite radio module under back drivers seat. Normally unplugging and reconnecting helps but you need a scanner to read the audio system.

@mchaudry9811

3 жыл бұрын

@@MasterTechLou Thank you for the rely. I did try unplugging the satellite module already. The problem remained. Do I need to replace it? What about code for the n80 steering control module-should I change that?

@MasterTechLou

3 жыл бұрын

@@mchaudry9811 I cannot answer those here on KZread I dont have enough information. If you need help you can reach me at my site. Thank you for viewing I do appreciate your time.

Hey so I have a mercedes c250 water got in to the distributor blocks and now it's acting up , lights flicker, radio flickers, radio turns off amd on what can be the problem?

@MasterTechLou

21 күн бұрын

That water got into your distributor blocks

@MrSouthside2021

21 күн бұрын

@@MasterTechLou in the hubs where the wiring runs . Can that affect the radio turning on and off and gauges lights flickering

@MasterTechLou

20 күн бұрын

@@MrSouthside2021 100000000%

hi how do i diagnose if the ecu motor communicates or receives data?

@glasser2819

4 жыл бұрын

start by looking at live data unless ECU is dead.

Dont know if this is beyond your knowledge or not, but do all modules communicate with the cgw or is that only for communication between the 2 different circuits? Reason i’m asking is because i want to hook up steering wheel controls of a r171 into the r170 canbus and was wondering if i could get those working on my radio that can handle those canbus inputs. But the r170 never came with steering wheel controls, so i dont presume a cgw knows how to handle those signals

@MasterTechLou

2 жыл бұрын

To the best of my knowledge that is what the gateway is and refers to , is the module that can accept high and low speed can data bus signals to process them and allow them to talk to each other.

@RobbertW2

2 жыл бұрын

@@MasterTechLou so you think these steering wheel controls could potentially work on a radio that understands the canbus signal if i jack it up to the canbus?

@MasterTechLou

2 жыл бұрын

@@RobbertW2 I don’t know personally. I don’t think they will as you cannot just add stuff to the can bus unless the company made it specifically with this intention in mind.

@RobbertW2

2 жыл бұрын

@@MasterTechLou yea i understand that, but the steering wheel controls of the r171 already work via can bus, so in that way its adding a mercedes can bus device to another mercedes can bus. Think its just a matter of trying.

@MasterTechLou

2 жыл бұрын

@@RobbertW2 they are two different models. So the software and the language wont be the same. Of course it dont hurt to try but my knowledge tells me it will not work. The r170 was not a smart car. The r171 is a totally different beast.

Well said but i have a question. Mercedes w204 has some CAN Bus on the driver side. How do we identify the segments in which different Can bus function. How many units are under each individual Can bus?

@MasterTechLou

9 ай бұрын

The color of wires indicates which CAN data bus it is. As for how many? Thats based on options. You need to look at a wiring diagram also compared to the vehicles options list. Can bus connections also arent marked. So only way to know which module a connection belongs to is to ohm it from module to connection.

@OlaOlu23

9 ай бұрын

@@MasterTechLou well said.. Thanks a lot

@OlaOlu23

9 ай бұрын

I have seen cases people read Can wires without using multi meter, they use testing bulb to derive issues partaining to the car. Please can u explain more on that?

@MasterTechLou

9 ай бұрын

@@OlaOlu23 I cannot. I dont know that method

@JamesFFHarris 2 months ago The Dealer told me my car, 2004 ML350, can not be fixed. The AAM went out and is now obsolete. Does anyone know a work a round because these computer are specific to each car and you can not substitute used parts. Great body , tires, interior, I need help!?

Think I might have shorted my CGW on my w204 c250. Forgot I had engine running when connecting car to Xentry to try and change some settings on a virgin amg IC i just got.. Now Xentry isn't able to auto detect VIN when connecting, and when trying to communicate with IC it says unable to communicate, says possible cause is Power Supply, or unit that isn't supported, however I was able to connect the IC before it stopped detecting VIN, communicating with cluster etc. Is a replacement CGW module expensive? I know things would require codding, just don't know exactly how much of a hit i'm looking at If the CGW module is in fact toast. Subbed.

@MasterTechLou

3 жыл бұрын

you cannot "short" anything just by connecting the scanner. this model has issues with relays supplying power to the obd. check fuse 73 in rear fuse box, if before 2009 this is a known issue. could be bad rear sam or relay. best I can say on youtube.

Have not yet finished this video, but is this CAN set up similar to an MB Truck?

@MasterTechLou

3 жыл бұрын

all mb "cans" work the same. I have yet to see any that do not. in newer models the can will only be between specific modules, like from drivetrain to engine to trans to ism. for example I hope this helps.

@ChrisSBelas

3 жыл бұрын

@@MasterTechLou this is extremely helpful. Thank you. I'm starting out as a MB tech on trucks. So need all revision I can get.

It was great video man, But I would have a question to you about the wiring system of cars THAT I often see that Startor demands CAN lines. But as we know the Starter needs just 2 hot lines that one of them is always hot and another one is hot through relay. And why CAN lines for starter? P.s- I talk about mercedes cars on WIS/ASRA program

@MasterTechLou

3 жыл бұрын

i have never seen a actual starter with can lines. I am not sure what you mean

I have a 2003 bmx x5 that’s telling me that the dme has timed out! I can read all the other modules in the car but I can’t connect with the dme! It has been swapped out due to getting wet but I can’t read it from the obd port! It has 2.5 volts on the can bus wires but I can’t get it to come back on line with the rest of the system.... What’s the process to get it back on line??? Re-sync it???

@MasterTechLou

5 жыл бұрын

Wesley Wood there are no processes, there is still a can data bus issue. A new module does not mean a good module. You still need to confirm power and ground at the dme.

@wesleywood2282

5 жыл бұрын

Benz-Tech Lou P. I do have power and ground at the dme! I checked for terminal 15 and 30 and there is power there... Through the obd port, I can scan everything else but I see “DME timed out” when I try to read the codes. I get that information from the transmission module, that obviously connects to the dme.

@MasterTechLou

5 жыл бұрын

Are you trying to do this with engine running or engine off? Im a mercedes guy, but when I used to scan bmw I noticed it would not scan right if the engine was running.

@wesleywood2282

5 жыл бұрын

Benz-Tech Lou P. I can’t get it running... Long story short: My dme/trans module got soaked due to water back up in the box.. The gentleman, when pulling the plugs from the dme, pulled the pins out as well.. So we got a new set, “key, ring, EWS, DME” and also redone the connectors on the wiring... Now, I can crank the car, but the car won’t start! When I try to scan the system through the obd port, the scanner can’t read the dme.. I can read everything else but the dme. I rechecked the persons work and to make sure the pins had power, ground or whatever and everything seems to be there! But the transmission module says “dme timed out due to can bus”.... This is where I’m stuck at! I can’t get a link to the dme through the obd port

@wesleywood2282

5 жыл бұрын

Your video is great information though! I thought maybe you were familiar with the Bmw as well...

How can you check if a CanBus is the problem or a SAM module what are the differences?

@MasterTechLou

2 жыл бұрын

If you have voltage on can lines but cannot communicate with the sam. All you need are power, ground, and can data voltage. If you have all those and cannot communicate, then the sam is bad.

LOU IS THE TRUTH. HE HELP ME WITH A 2010 MERCEDES C300 THAT WAS FLOOD CAR. IT HAD CAN BUS ISSUES. I WENT TO HIS SITE TO CREATE A SERVICE TICKET. AND THEN HE CALLED ME AND HE HELP ME FIX MY ISSUE LESS THAN 2HRS. MY MAN. I'm so happy

@MasterTechLou

4 жыл бұрын

veaaron thank you for reaching out. I do appreciate the trust ! Be safe!

I am doing m111 engine w202 1998 model turbo project. I have a canbus in my vehicle. The standalone ecu I bought also has canbus feature. But since I do not know the canbus codes of the vehicle, I do not know how to code the indicator, air conditioner, ezs, starter and other features. Would you help me with this topic

@MasterTechLou

2 жыл бұрын

Hello, what do you mean by code the indicator and other features? Code it into what?

@Kemals_performance

2 жыл бұрын

@@MasterTechLou I will remove the original ecu when using the standalone ecu. how will all equipment connected to original ecu work

@MasterTechLou

2 жыл бұрын

@@Kemals_performance I dont have that answer I dont know why you are doing such a thing and who supplies this. Sorry.

@Kemals_performance

2 жыл бұрын

@@MasterTechLou because I don't want to use both original and standalone ecu at the same time

@MasterTechLou

2 жыл бұрын

@@Kemals_performance I dont understand why you need or want a stand alone ecu is what Im sayin.

I'm sniffing data from mercedes sprinter and there data that change 16 times and restarts again, are these data equal for all mercedes sprinter or not? thanks

@MasterTechLou

4 жыл бұрын

can you clarify what you mean? I am not following what you are asking. thanks!

@az-eddinehaida2327

4 жыл бұрын

@@MasterTechLou Hi here is an example of data sniffed on Mercedes Sprinter when use right blinker (Id 0x11F): F9 A1 22 02 F8 A2 20 02 70 A3 1E 02 after 620ms E8 A4 22 02 F2 A5 20 02 AC A6 1E 02 and so on every time the first byte is different. Do you know what is this number (first byte)? Thanks

@MasterTechLou

4 жыл бұрын

That is beyond my knowledge my friend sorry.

so I have a can bus off fault the car starts but when place into drive or reverse the car shut of

@MasterTechLou

4 жыл бұрын

Brad thats not really a can bus issue. If you want my help jump over to my site and I can surely help you fix this. Www.Cartechconnect.Com choose the $60 option for this. If it ends up being something easier I will surely reimburse you. Thanks

@brad3085

4 жыл бұрын

ok am about to go to your site now thank you so much love your videos btw

@MasterTechLou

4 жыл бұрын

Brad thanks man appreciate the feedback!

hi guys,i have an w213 2015- and it can not diagnoze on obd,any sugestion,i try diferent pc"s but not,any trick to do or where to look,thx

@MasterTechLou

Жыл бұрын

hello, the diagnostic port is wired directly to the EIS, (electronic ignition lock control unit) located under drivers carpet on the left, that is the module that talks to all the other modules, its the gateway. youll need to start there.

@ermirseriani7717

Жыл бұрын

@@MasterTechLou thx a lot,i find one emulators on the keyless ecu inside

@ermirseriani7717

Жыл бұрын

Why that’s emulators needed

@MasterTechLou

Жыл бұрын

@@ermirseriani7717 no clue on that one

Thank you for posting your KZread videos so we can learn from you. I appreciate you doing so! I could really use your help and hoping you might have an idea or answer for the following. My W211 2003 E500 Mercedes has a continuous running fan (the car will overheat if I disconnect fan) , SRS light and check engine light on, and my front seat controls do not work, and air-matic sport button near the gear shift doesn't work (at least no red light indicator). The car will start and drive. Please help. Thank you in advance and thank you again for posting your videos!

@MasterTechLou

3 жыл бұрын

Sounds like you might have a can data bus issue. But you will need a scanner like the icarsoft to diagnose. And yes of course I can help. Thanks for the nice comments. You can reach me at www.cartechconnect.com I would be more than happy to help! Lou

I couldn’t find the website online, but i got a 2002 Mercedes C32 AMG (W203) where my steering column module won’t communicate via OBDII. After removing the module, found the CPU transistor on the module was faulty. I’ve had the transistor replaced but after I reinstall it to the car, the CPU transistor fails again. I confirmed I’m not overcharging the system. The alternator is putting out 14.1v when first started, then 13.8 after the battery is recharged. Any ideas what the issue might be?

@MasterTechLou

Ай бұрын

I closed the website. Replace the module. We dont rebuild anything. Sounds like your too smart in a good way. Just replace the module.

@freeb1893

Ай бұрын

@@MasterTechLou no worries! I kind of figured you might have! Thanks for the response! I’ll definitely do that! On another note, another potential engine CAN bus related issue, I have an engine fault code that’s current and won’t clear, but doesn’t trigger the CEL strangely enough, and it’s “Rectify faults codes with the transmission module”, but when you go to the transmission module, there’s no fault codes. I’ve also since changed out the transmission module, but that engine fault code still won’t clear. Could that be CAN bus related?

@MasterTechLou

Ай бұрын

@@freeb1893 you are possibly using a scanner that cannot read the fault code in the trans. Try another brand or model scanner

@freeb1893

Ай бұрын

@@MasterTechLou actually I’m using a Mercedes-Benz STAR with Xentry / DAS. I also tried my Autel too but same results with both MB STAT and Autel. Any other ideas what might be going on?

@MasterTechLou

Ай бұрын

@@freeb1893 makes zero sense then. Id have to be there first hand to see whats happening

Perfectly simple and a great idea. When its working. I get it totally. But in the real world the overburden of "convienence" features on modern vehicles has put literally hundreds of thousands of otherwise good vehicles into the scrap yard. Of course they are technically "repairable" its just that at dealership labour rates it exceeds the value of the vehicle. For transportation most of these features are pure fluff....do you really need "memory mirrors". Remember how hated single strand xmas tree lights were back in the day ? One light go out you'd spend hours trying to find the bad connection...same deal hear. It forced us to throw out the entire strand and buy a new one. Connections in a vehicle just cant hold up over time....moisture..vibration..temperature extremes take a toll starting in 5 to 10 yrs then stuff starts to "act up" or not work at all. Prior to retirement from LKQ we saw many...an absolutely beautiful Mercury Sable...zero rust perfect black paint...loaded...power everthing..leather...the good alloys...duratec V6...ABS...everything scrapped with only 134,000Kilos. But everytime the owner spent big$$$$$ something else went. The last straw was the ABS light came on ....he was done.....stripped and crushed.

hi! This was a very good and understandeble video! I just have one question. Where can I find those high/low can bus cables? are they hard to find cause it feels like i’ve been looking them for a lifetime… The car itself is a W210 2003. appreciate it :)

@MasterTechLou

Жыл бұрын

210 ended in 2002 and 211 started in 2003 The can bus on both are different. In 210 they are soldered together in 211 they are plugged into connections.

@leowahlbeck2698

Жыл бұрын

@@MasterTechLou My bad, it is a late 2002 210. But do you have any idea where I can find those high/low cables? Are they findable in the engine bay?

@MasterTechLou

Жыл бұрын

@@leowahlbeck2698 you will find the cables at each module, theres a solid green and a green with a white stripe twisted together. they connect to the other can wirings with solder, so there is no plug you will find with all the cans together, the solders are located in the passenger door sill wiring harness. these old ones are a pain because if you have a can issue you have to cut the wires from the solders and see when can comes back to life. thats all I can say via comments. best of luck.

@leowahlbeck2698

Жыл бұрын

@@MasterTechLou Thank you very much for helping me! Best of luck for you too!

👍🏻👍🏻👍🏻

Thank you very much for your brief explanation. But I have trouble reaching you on your website, is it still active? I need help with 2003 Mercedes E320 has CAN B bus problem.

@MasterTechLou

2 жыл бұрын

My website is closed sorry.

@alkhashtee

2 жыл бұрын

@@MasterTechLou oh ok. So can we just communicate here or I through the email?

@MasterTechLou

2 жыл бұрын

@@alkhashtee neither im sorry. I work on JustAnswer.com as well . I do not diagnose through youtube comments. I love to help but I have very little time to do so outside of day to day life. sorry.

What if im still able to connect to the ob2?

@MasterTechLou

19 күн бұрын

Often times you are able to. But you have communication issues with certain modules. There are unlimited scenarios

@RobertYayo

19 күн бұрын

@MasterTechLou yeah I'm going through this with 16 yukon it's saying "control module redundant memory performance" Also with lost communication to high speed can bus Tcm triggered MiL

Any idea on why my 2002 sprinter instrument cluster has no life except the SRS light?

@MasterTechLou

9 ай бұрын

No power, or no communication so its not waking up

@tallyman15

9 ай бұрын

@@MasterTechLou correct. Only the SRS light is alive. I've checked all the fuses.

@MasterTechLou

9 ай бұрын

Theres way more too it then just checking fuses.

@tallyman15

9 ай бұрын

@@MasterTechLou using autel maxiap200, I get these codes that relate to IC. C1024, P2315, P2315(2315).

@tallyman15

9 ай бұрын

@@MasterTechLou do you offer paid support through your PayPal?

hi this my 1time watching u I just sub..u makes thing very easy thanks for your time ?with xtenry obd2 can we encoding some future..

Mastah Lou🙏...i think you officially answered situquestion..situation /question....I have 2003 e500 seems like it has interment connection issues..p0600...I have icarsoft mbii and Zurich obdii several days after getting home I scanned car for dtc's two came up in ecm p0600 and p0701 I think mass air flow ... with cel and lot of stored codes from low voltage and rear Sam issues which had been repaired ..and two marker lights out I went out to clear all codes and start fresh. Yesterday when I went out attached mbii scanner it read all module codes ,however when I went to ecm it said that it did not know the codes..it had 11 codes in ECM..I couldn't erase or cleae any thing i in that module i was doing this while car is running....the tcm did not show a any code info for a soft limp mode car was in 3rd gear.. until shut of and on . I turned car off plugged it n Zurich thirteen it read codes and allowed clearing of the mass code but p0600 remained in pending..when I went to CGW it read no dtc's even though car had error in in drivers Sam marker lights abc and others

@MasterTechLou

3 жыл бұрын

I don’t like the zurich myself. I think it may not be helping you as well. But make sure to check the front fuse box and also trunk and door sills for water or corrosion. Definitely sounds like a module killing the CAN data bus.

@erickushner9869

3 жыл бұрын

@@MasterTechLou Ok I'll do that ..this car say for a couple years I have several other Mb's as well ...but I'll definitely do that and will be subscribing to your service later today..thanks

@MasterTechLou

3 жыл бұрын

@@erickushner9869 If you encounter issues with the message box, no worries I will see an email if you make payment and I will reach out to you for sure. either way thank you for reaching out and watching my videos. Lou

@erickushner9869

3 жыл бұрын

@@MasterTechLou ok no prob

Hey Lou, If you don't mind tell me what city and state you are. I am in Virginia Beach.

@MasterTechLou

7 ай бұрын

Illinois

NETWORK ARE SEPARATED BY USE CAN-B Body (A/C, Wippers,...) CAN-C Chassis ie. Eng/Tranny CAN-D Diags CAN-E Ext (Seats, Doors, Roof,...) LIN : Simplified Networking Troubleshooting standard DTC are kept vague and misleading to prevent simplicity 🙂

Can you tell me what BCM, SAM and TIPM means ??

@MasterTechLou

Ай бұрын

Body control module Signal acquisition module Totally integrated power module All are basically the same with different names. Depends on the manufacturer. Bcm many makes Sam- mercedes Tipm- dodge

Hey boss I got 2 questions would you have a can bus diagram on a 2004 sl500 and on 2 of the Sam module from a junk yard need to be programmed

Mastah Lou .. need assistance o. Squiring code for command radio I'm updating from the cassette radio of the 03 e class to the 2005/6 command

@MasterTechLou

3 жыл бұрын

Hello! I dont understand what you mean by acquiring code?

@RoadHeros610

3 жыл бұрын

@@MasterTechLou how do I go about getting the code to the radio I thought I read that you can help with that however I can't find your web page

@RoadHeros610

3 жыл бұрын

What is name of your site?

@MasterTechLou

3 жыл бұрын

@@RoadHeros610 what country are you in?

@RoadHeros610

3 жыл бұрын

@@MasterTechLou I'm in united states california .. southern cal .. I found it cartechconnect

Where are the cans located ?

@etorres52

Жыл бұрын

Need advice, I have an 08 c350, and overhead control panel temp sensor marks -128 and the ac doesn't kick in cause of that, ac was working fine and it stopped working from one day to another.any advice?

@MasterTechLou

Жыл бұрын

Cans on sides of floors in sill areas. Also most likely a bad sensor or wiring to the sensor.

Hi, Thanks so much for the video. I tried to access your webpage but for some reason i cant. I am having problems with my CLK320 2005 CAN system and would like to get your opinion if possible!! Thanks so much :)

@MasterTechLou

2 жыл бұрын

Thanks, I closed my site . Sorry 😞

@hernanvera5381

2 жыл бұрын

@@MasterTechLou Oh no!! :( thats a bummer. Do you still offer any consulting/advice?

@MasterTechLou

2 жыл бұрын

@@hernanvera5381 you can find me On justanswer.com

Thank you for this great video, we have a Mercedes W219 with an ABS/ESP module replaced (used one with identical numbers) we have a pass through Xentry system, as well as a clone good quality system, cannot do anything with a Pass through, the clone system won't allow programming,as it detected an on-line software, but we don't have an on-line account,asides it is a clone! how can we reprogramm the replacement module? is there other way's like with Galletto V54, or a kess V2 systems to read the software and copy and paste it to the replacement ? Thanks in advance for your kind input. 🙂

Thanks a lot you did a great job can you tell more how to connect Bluetooth on w164 Mercedes benz i will subscribe to you

@MasterTechLou

11 ай бұрын

Thank you, connecting is super easy but you have to have the phone kit installed. And you have to have the Bluetooth adapter plugged in in the center consul.

@yungupdate9746

11 ай бұрын

@@MasterTechLou please can I get a video?🙏🙏🙏🙏

@yungupdate9746

11 ай бұрын

@@MasterTechLou A video might help

@MasterTechLou

11 ай бұрын

@@yungupdate9746 there has to be hundreds of them out there already. plus I don’t have a 164 near me to show you or else I would.

@yungupdate9746

11 ай бұрын

@@MasterTechLou Thanks for the info excepting more good videos from you

Is the bus serial, I assume it

@MasterTechLou

3 жыл бұрын

I have no idea what that even means . :) nor have I ever even needed to use that word.

@johnbates606

3 жыл бұрын

@@MasterTechLou is the data going across the bus serial data. Ie similar to information in a computer or would it be analog. My E550 kills my iPhone at startup and for another 10 minutes afterward and then it comes fine. We spent 3 days with apple tech support on the line trying to resolve it and could not. They connect ok from start. If However in the first 10 minutes you can make a call but music support is garbled and then it comes right and works correctly which makes no sense to me. All the firmware is up to date and their is no codes to deal with. 2009 E550 with 50k kms on the clock and I’m looking for an thoughts that will restore functionality or experiences like this from other people.

@MasterTechLou

3 жыл бұрын

@@johnbates606 ok that “serial” data is beyond me and simple diagnosis. Almost 100% of the time phone issues are the phone. A small percentage is updating the software of the audio system components which only a dealer can do.

Aquirung code