I went through the same issue with water pump. I feel your pain.

where did you buy the injectors? thank you for the video, it is very helpful

I have the ccta engine and I just got my new aluminum water pump, now, I’m not sure if I want to use the plastic hose that connects the water pump to the cylinder head coolant flange

Ooof the frustration in your voice lol

@Matt_Pie

3 жыл бұрын

Yeah :(

Yo I have a little octopus in my window too 😂🙏

I had this job done n July, carbon cleaning, new oem injectors and water pump, pcv unit, fuel filter and intake manifold. My mechanic had a little trouble with the water pump bolt holding it n had to get a new one, everything was oem vw totally worth it runs great. I wish you would of done a new intake manifold, that's what started my whole process of getting this done. Good video, but this is not a beginners job.

@Matt_Pie

2 жыл бұрын

If my intake manifold fails im going to try to replace the diaphragm instead of the whole thing

I,m just change waterpum and then got problem with break senser padle

what’s the name of the water pump bro

Do you remember if the water pump hoses have gaskets in them?

How did you get that damn belt off?

Did the old thermostat housing not fit on the aluminum one ? I have an aluminum water pump and I believe my car is also CBFA

@tvpharoah1314

Жыл бұрын

If your car has a “D” in the fifth digit of the vin, it is a cbfa

Hey, so my water pump is going out and I have the cbfa engine like you witch water pump is the correct one to get?

@Matt_Pie

2 жыл бұрын

Go to ecs tuning’s website when you look for the waterpump kit there will be a disclaimer on which ever one you click on saying whether its for cbfa or ccta. Also the cbfa one is the one witth the sensor at the bottom

Which intake manifold did you get? Mine needs to be replaced.

@Matt_Pie

2 жыл бұрын

Cheapest one I could find on ebay, I reused the oem one though. Buying the whole cheap manifold that came with the gasket was cheaper then just buying the gasket

Yo did you take the whole front end apart just to do the water pump?

@Matt_Pie

2 жыл бұрын

no i also did a carbon clean it was going to be a multi day process and I never did it before so yeah I tore the whole front apart

I need to change mine also, how do I know which one I need?

@Matt_Pie

2 жыл бұрын

www.vwvortex.com/threads/cbfa-or-ccta-engine-codes.5617346/#post-76363345

This is crazy . I have to do this same exact job. Carbon cleaning , manifold , and water pump. If you can please go a little more in depth

@Matt_Pie

3 жыл бұрын

Watch the tutorials I linked in this video and the last those helped me out lemme know if you have any questions

@usa5046

2 жыл бұрын

Get all gaskets intake manifold, throttle body and injectors o ring kits you need 4 of them. Also get new water pump gasket and union with new o rings for the water pump hoses I believe there are two big o rings for the big hoses and 2 small ones on the union. Also about 3 gallons of coolant.

@usa5046

2 жыл бұрын

Also forgot the water pump belt. You need to hold crank clockwise while going counterclockwise to loosen bolt holding belt In place

@maccfr5110

2 жыл бұрын

@@Matt_Pie Do you have the link for the aluminum waterpump?

@Matt_Pie

2 жыл бұрын

It’s on fcpeuros website, aluminum waterpump is ccta only

hey bro i have the same issue with my water pump where can i get the OEM water pump ?

@Matt_Pie

3 жыл бұрын

Ecs tunings website tells you cbfa vs ccta

@alonzoaguirre9339

3 жыл бұрын

@@Matt_Pie thanks mate !!

One more video that fails to actually show how to put the new belt on the cog! Not a single video on youtube shows how to get the bloody thing on again!

@Matt_Pie

2 жыл бұрын

I had to walk it on while someone else turned the motor over its a pain in the ass

@ehrashkae6343

2 жыл бұрын

@@Matt_Pie actually, it's not! I found one video online that shows the (Right) way to do this, and it only takes about 5 minutes and is crazy simple! Leave it to a Mexican to know how to do it right, and Show the world the correct way to boot!

@KingCease

Жыл бұрын

@@ehrashkae6343lol racist. He didn’t show how to take it off tho!

i just wrote this long ass comment but it got deleted but anyways bro what i said is that it’s not worth keeping ur old intake manifold because it’s a common failure … they have many ways that they can fail and the new one u have is the revised one that addressed all the failure points which were PLENTY i will link a video i recomend u see it. kzread.info/dash/bejne/jGaK0aypYtzYqbg.html that being said. if u wanna save money and maximize it then you should use the old intake manifold as long as it works fine but if it doesn’t it’s worth replacing it bro.

@Matt_Pie

3 жыл бұрын

The intake manifold i bought was super cheap and not oem I bought it because it came with the gaskets I need and was cheaper then the other gaskets listed. I cleaned the carbon off of the manifold if the diaphragm fails I have a spare on that new intake manifold

@selrayes2

3 жыл бұрын

@@Matt_Pie when u say cheaper do u mean 50 bucks cheap or 200 bucks cheap? cuz the one from vw is 200 bucks or so and it’s like the newer version of the preexisting intake manifold that commonly failed. i had mine replaced because the intake runner flaps failed and the replacement one is better and just is smoother than the older one bro anyways lock the content keep it up 👍

@Matt_Pie

3 жыл бұрын

Thanks man! And I mean the intake was a chinese knock off that was literally 40 bucks with gaskets 😂 one intake manifold gasket was the same price so I just bought that shitty intake

That's too much work

@Matt_Pie

3 жыл бұрын

I have no money but I did learn a lot doing it myself

@Captain_Brown_Beard

3 жыл бұрын

Nah this is nothing. Try working on BMW turbos

@MK6CHRIS

3 жыл бұрын

@@Matt_Pie yeah bro, trust. I'm broke too so i do all my work. Unless I can't figure it out.

@MK6CHRIS

3 жыл бұрын

@@Captain_Brown_Beard lol working on a bmw?

@Captain_Brown_Beard

3 жыл бұрын

@@MK6CHRIS Yeah I find this GTI much easier than my BMW was. Parts are a lot cheaper too!

Worthless video for water pump install

@Matt_Pie

2 жыл бұрын

Did you read the title its a vlog

@KingCease

Жыл бұрын

@@Matt_Pieis it really? We never even saw what u look like lol