Not sure how youtube got me here.... but it's really cool to see the craftsmanship that went into making these weapons.
@alexpacura98103 жыл бұрын
this guy was so knowledgable!! we need more
@nivesknight
3 жыл бұрын
He did mess up.... it is a lower not higher carbon steel in the center. As well as that doesn't look like battle damage. It looks like rust damage. It was probably restored and then sold.
@hooper45813 жыл бұрын
That was awesome. Amazing swords. Thanks for sharing. As always it’s a pleasure to watch pal thanks again for taking us along
@00corin003 жыл бұрын
Many people do not believe these swords can cut through 3 bodies. What they fail to realize is a Japanese man in the 1600s was way thinner and smaller than a modern man. Much much smaller.
@micahcampa
3 жыл бұрын
yea like 5ft
@joejones9520
Жыл бұрын
humans at that time were roughly the same size and proportions of the contemporary GI Joe action figure doll.
@shaggyrumplenutz1610
Жыл бұрын
They were usually cutting through the spinal column under the ribcage and the flesh around it.
@tobiasbodenburg4264
7 ай бұрын
@@joejones9520😂
@moredistractions3 жыл бұрын
I've met Bill at militaria shows before. Very reasonable guy and really knows his stuff.
@BroosDager3 жыл бұрын
Those swords demand respect thanks for sharing
@itsmeagain78253 жыл бұрын
As a modern metal worker the level of perfection is astounding when you know this blade was made without any powered tools !
@elyanae9588
2 жыл бұрын
As all blades were made in the ancient times?
@jamiedalton2623
2 жыл бұрын
@@elyanae9588 Yes, there weren't any power tools until the industrial revolution
@war.neverchanges
2 жыл бұрын
@@elyanae9588 💀
@flinch97483 жыл бұрын
Fantastic video! Thank you very much. What amazing pieces of Art. Also very nice to hear all the details from this gentleman, I’ve learned a lot. The close up of the steel is simply stunning, what craftmanship!
@chuckschillingvideos3 жыл бұрын
Incredible engineering. When you think of what Japanese swordsmiths were doing with raw materials of dubious quality and with primitive equipment, it is just absolutely incredible to see the stunning products they turned out.
@MrJamesschro
4 ай бұрын
The tools being used were definitely not primitive
@aaronstoup3 жыл бұрын
Great video! Amazing information, and history, on such incredible swords!
@larryhammer1784
3 жыл бұрын
Weep
@michaelbarret11473 жыл бұрын
Thank you guys for sharing that! Cool information.
@kimfucku80743 жыл бұрын
Those blades are just beautiful! Blows my mind how old they are!
@micahcampa
3 жыл бұрын
there is alot of swords like them there not rare but they are if you go after certin smiths and depending on their ranking
@robdeskrd3 жыл бұрын
That Norishige sword is unbelievable, the steel has a striking resemblance to wootz and that hamon & polish are fantastic!
@notatheist3 жыл бұрын
My father bought a samurai sword from an estate sale. The widow sold two guns and the sword to him for $100. He had them appraised. The sword was made in the mid-to-late 19th century and was worth roughly $10k. He sold it for $7k cash at a gun show to someone who acquires “national treasures” on behalf of Japan. I held it once and was amazed at how heavy and dense it was. The amount of strength required to handle a blade that heavy is impressive.
@90iatros
2 жыл бұрын
Heavy? It has roughly 1-1.5 kg...
@notatheist
2 жыл бұрын
@@90iatros It was definitely heavier than 1-1.5kg. It was heavy enough that the idea of swinging it in combat amazes me, and doing so is an impressive show of strength.
@Militarycollector
Жыл бұрын
So in other words during her time of sorrow he ripped her off..👎
@hangten1904
Жыл бұрын
@@Militarycollector My reading comprehension suggests he didn’t know what they’re worth when he bought it until he got them appraised. The widow ripped herself off for selling everything at bargain price at an estate sale.
@beefcakesfat2310
6 ай бұрын
@notatheist why would it be so heavy. That doesn't make any sense at all if it was a genuine kitana worth 10k. Kitana including the ones this guy is showing are not heavy
@gregbryan63733 жыл бұрын
Excellent review. He certainly knows what he is looking at. I have always wanted to own art like that but its a bit out of my budget.
@militariacollectablesbelgium3 жыл бұрын
Great video! More japanese swords please!!!!
@emielheeneman3 жыл бұрын
Bill has incredible knowledge and a great guy all round. Still hope to go do some goldpanning and prospecting with him in Colorado.
@Bill-wm7tt
3 жыл бұрын
It seems like every time I'm in MT, WY or CO The places to pan or prospect are closed. I usually go fishing though. Send me an email! Bill
@b_ktps3 жыл бұрын
Beautiful norishige, you have a great piece!
@jakeroark67183 жыл бұрын
Great swords thanks for the video it was pretty cool.
@elissitdesign3 жыл бұрын
Great info! What hoping to hear some ballpark prices for these amazing blades.
@cornholius
2 жыл бұрын
Anywhere from $100 to $100,000 depending on who is doing the gouging.
@onijerad3 жыл бұрын
His knowledge with Katanas is amazing and those blades are gorgeous. If I owned those they’d be under lock and key definitely not appreciated like they should be
@fabledreamor Жыл бұрын
He explained it pretty well. I really appreciate it.
@dastiles13 жыл бұрын
Don't know this KZread channel or the narrator of the video but I have met Bill multiple times over the years at shows and he is very knowledgeable about Japanese swords.
@thehobbyguy70893 жыл бұрын
Wow! Tremendously beautiful swords!
@dennisrountree53763 жыл бұрын
Amazing! Unbelievable something can survive that long and look like that !
@gunfisher4661
3 жыл бұрын
No doubt the skill and workmanship that went into them was above awesome and no doubt may have been very expensive then witch leaves the question did the sword smiths get paid well or was it a godly thing to produce a sword like that.
@mahmoudlachmi44453 жыл бұрын
The top one cut through three bodies clean. He who lives by the sword dies by the sword
@foehammergaming3093 жыл бұрын
It seemed like bill was going to tell us what the other sword was worth which is what I was waiting for but dude interrupted him. I was like come on man. Lol still awesome video really cool.
@gwizzler3 жыл бұрын
World class fabulous blades, thank you for sharing.
@carlstanwick72873 жыл бұрын
Again excellent work, stay safe friend love n peace ,Carl fishburn co Durham uk
@ducomaritiem71603 жыл бұрын
Nice, I learned something.
@terryschmidt82593 жыл бұрын
keep up the good work
@Wolshanze3 жыл бұрын
It’s a Piece of Art before it’s a weapon !
@Divine_Serpent_Geh
3 жыл бұрын
While they are great works of art, it’s a weapon for killing first and foremost.
@dennylui
3 жыл бұрын
Absolutely Yes! Compared with the gun.
@paultuerena
3 жыл бұрын
I’d happily hang one on my wall as they are pretty, but as a weapon I’d take a good European longsword as a weapon first
@pav6882 жыл бұрын
Fascinating. I only have a Japanese ww2 Police Saber that I bought years ago.
@althesmith9 ай бұрын
These cutting tests were done using extra-long reinforced grips effectively turning them into polearms. The main purpose was to see that they wouldn't crack or warp easily under stress.
@KING-ZEAL5 ай бұрын
This guy's knowledge is world class. He's trying to be humble too.
@Mpantiques6 ай бұрын
Those two swords are exquistily beautiful, true priceless pieces! Congrats on owning them! 😃👍🏻
@5shotsr6113 жыл бұрын
Beautiful blades 😍🤩
@vladimiriantchev84202 жыл бұрын
You guys are amazing. Beutifull items.
@mattnobrega6621 Жыл бұрын
Would love to own one of those.
@mikewhite36823 жыл бұрын
I would have liked to hear about the Gunto.
@j.lietka94063 жыл бұрын
Does Fredericks Swords still deal in japanese swords? Think he was out of Illinois thank you
@gibsondrummer3 жыл бұрын
Very surprised to see him handle the blades with bare hands and then not immediately wipe them off as well Bare skin has acids and oils in the sweat that can leave permanent damage
@DLKY80
3 жыл бұрын
For Japanese swords, its ok to handle the nakago (tang) of the blade with your hands since it is already patinated. Gloves are actually not recommend since it might cause the slippage and also damage the patina if it is rough
@occamsrazor12853 жыл бұрын
12:45 Fun fact: the actual words are different, but Kanji basically is Hanzi (basically means "Chinese Characters". There isn't literalization cuz the character Zi is roughly akin to "existence" but Hanzi translates to Han writing, Han being a primary ethnic group in China. At least the group that primary handled the government administration). So, in Mandarin (the pronunciation of the characters), those characters are Tai Dao. Tai means great, highest or exalted (just like ta) and Dao is knife (in this pronunciation. The Dao in Daoism is a different character, don't confuse them). So "great knife", meaning "sword". Same characters. Same meaning. Different pronunciation. Because I can read and write some Mandarin (once doesn't technically WRITE Mandarin. Mandarin is just the pronunciation of the characters), I can muddle along when reading Kanji, though there are pitfalls. Mandarin is a really old language, so there are a lot of idioms that you sort of need to know the fable to understand. Just like in American English (but WAY older). The word "skrill" in American English is probably not going to make sense, like the phrase 杀鸡儆猴 (Shā jī jǐng hóu): Kill the Chicken to scare the Monkey (means to make an example out of someone [in order to keep the rest "in line"])
@norml20113 жыл бұрын
absolutly remarkable
@johnburrows11793 жыл бұрын
Fantastic blades. Can you imagine how many of these were brought home as souvenirs and given to kids, running around chopping trees and stuff. Little did they know they were destroying thousands of dollars 😳
@arizaldimas1718 Жыл бұрын
how long do width of motohaba and sakihaba of those katanas?
@grandadlovestheo23872 жыл бұрын
Indeed works of art 👍🇬🇧
@kev123649 ай бұрын
Does anyone know the name of the woodblock print in the video, thanks
@warwickmudge41143 жыл бұрын
Those swords are incredible. I don't think there would be many European swords of that vintage that look that good. You could never OWN a sword like that, only be its curator.
@paultuerena
3 жыл бұрын
Only because European swords evolved so old swords were retired. European swords were made just as well. Japanese swords were only made that way to make up for the crap steel they had
@micahcampa
3 жыл бұрын
@@paultuerena the japanese steel was just as good as the european steel
@paultuerena
3 жыл бұрын
@@micahcampa Do some research
@micahcampa
3 жыл бұрын
@@paultuerena i did i have talked to multiple smiths and japanese smiths they say the same thing
@paultuerena
3 жыл бұрын
@@micahcampa Research... as in read some scientific papers, they say different. But you have your opinion that Japanese swords are special so you won’t lol
@mobilegamersunite3 жыл бұрын
Blades are beautiful ❤️
@flyfin1083 жыл бұрын
impressive
@schmidtythekidd3 жыл бұрын
Send them to Lynn Thompson for some more cutting tests.
@gator832613 жыл бұрын
Good video
@rickbecket28203 жыл бұрын
Did they say the prices? I think I missed it.
@MsDoys2 жыл бұрын
“RAIDEN” Kaneshige, Kanetsune, Hojoji Masateru w/ three separate cut tests. Named Raiden (God of thunder and lightening) published Shinto taikan. Nagasa 72.8 cm. With old sayagaki by Dr Sato Kanzan sensei. NBTHK Juyo Token (Important Sword) Kazusa (no) Suke Kaneshige; Kanetsune; and Hojoji Masateru Katana - tempered steel, gold inlaid inscriptions Mei, Omote: Raiden (Kinzogan) / Kazusa (no) Suke Kaneshige / Tsuji Sukekuro Kanetsune (inscribed) Mei, Ura: Mitsudo / Futatsudo / Suri Tsuki To / Tsugo Mitabi Kiriotoshi (Kinzogan) / Echizen (no) Kami Hojoji Tachibana Masateru (inscribed) 17th Century Cutting edge length: 28 5/8 in. (72.8 cm)
@gothamgoon42373 жыл бұрын
Does Mark Felton know your using his theme song?😉
@atestamenttohistoryllc60903 жыл бұрын
Ooooooo billy. My favorite Minnesotan
@Bill-wm7tt
3 жыл бұрын
Its Minnesoootin!
@quentinstore14643 жыл бұрын
Betting that guy never goes anywhere without band aids...
@dennishein2812
3 жыл бұрын
More like tourniquets.
@micahcampa
3 жыл бұрын
it is really hard to cut your self on these swords i have only got cut once in my 8 years of collecting
@Meloncholymadness3 жыл бұрын
My God these are beautiful! I would love to own one, how much would it cost me?
@oneway4667
3 жыл бұрын
Not a expert by any means but I’m sure 20k plus easily but if I had to guess I would say in the 60k range they are very old
@jasondutchman6736
3 жыл бұрын
He said in the video that the older one sold for $100,000 and the one with the cutting tests $90,000. A less prestigious one(not signed or from a lesser known smith) from the Edo period might set you back $4,000 - $10,000 + in full furniture. A similar sword in shirasaya like these, you could get for less. A WWII sword, while still a perfectly functional sword but machine made might cost you $600 - a few thousand if really nice.
@Meloncholymadness
3 жыл бұрын
@@jasondutchman6736 See, i want a functional. real sword. I simply can't afford history at the moment, though hopefully one day... :)
@kenromine3 жыл бұрын
Woe cool stuff
@alunwheeler34223 жыл бұрын
Very interesting and amazing that something is that old and is in fabulous condition very interesting guy great video
@micahcampa
3 жыл бұрын
alot of japanese swords are in this condition
@LPSpooks Жыл бұрын
Well @3:40 sounds like he was trying to pronounce Masamune the Legendary Japanese Blacksmith. Wow amazing 😮
@brianredban93932 жыл бұрын
Didn't they carry gold in the handles?
@123456789271644 ай бұрын
Those swords have the samurai souls still in them. And the souls of all they killed forever in battle.
@BACCHUS7773 жыл бұрын
Will you talk more about the early Type 94 with pinned Kabutogane?
@militariacollectablesbelgium
3 жыл бұрын
Yes!!
@Bill-wm7tt
3 жыл бұрын
The Gunto could be a type 94 that the 2nd hanger was removed before putting on the leather combat cover but technically the type 94's have 2 hangers. The blade in this mount was made by Gassan Sadakazu and is dated 1901. We did a video on it but I forgot my Mekugi-nuki to remove the peg :(.
@Bill-wm7tt
3 жыл бұрын
@@militariacollectablesbelgium The blase is a Gassan Sadakazu,
@BACCHUS777
3 жыл бұрын
Hi Bill there is a thread on the NMB about Pinned Kabutogane on Type 94, they are consistent with very early production of the Type 94. I have a few examples myself.
@jefffaulkner45763 жыл бұрын
400 year old sword named White Lightning. I dread the day when some idiot calls that sword racist.
@Isher13 Жыл бұрын
Is this sword available for purchase?
@-GRAVESITE-3 жыл бұрын
Mortal Kombat “Test Your Might” prisoner execution challenge
@obeastness
3 жыл бұрын
when he says "they named this blade white lightning" and he points to the kanji, it actually says 「雷電」Raiden, not sure where he got the translation of white lightning from.
@rivaicut69823 жыл бұрын
3:40 , 越前守法城寺橘正照 is read as Echizen no kami hojoji tachibana masateru. 辻上総介兼重 is Tsuji kazusa no suke kaneshige. 九郎兼常 is Kuro kanetune.
@kurtmuller28173 жыл бұрын
An expert who can not read japanese ! made my day. By the way it is Kanetsune not tsuna. And yea !!!!!!!!! The expert says the nagashi, the drawn lines by the polisher are no signature. Nonsens, of corse they are. This by example is the sign of an togi of the honámi school. An again the "expert" norishige uses sanmai or kobuse construction for blades. holy shit, this is an evention nearly 100 years later.....
@luckyboyyt85823 жыл бұрын
Wow, this is a fantastic video!
@brucecampbellforpresident13933 жыл бұрын
The shape of that sword from 1600s is needing researched desperately. Because a inlay of some names and cut test in gold does not authenticate . I’ve seen forgeries almost fool some of the best appraisers in the world. Further information is required possibly even a carbon dating as there’s very good swordsmithsthat specialize in reproductions down to the wear and damage. I hope those are authentic for they would be some of the best representatives of ancient Japanese steel I have seen not in the possession of Japanese owners or descendants .
@timothywiley63343 жыл бұрын
YES
@salvyballacc3 жыл бұрын
They would say its Battle torn to raise the price 🤣
@zhenyanovikova65703 жыл бұрын
very interesting. thanks
@hughgrection30529 ай бұрын
Man i had bought one that id swear looked just like this nearly. I was told on a sword forum it was fake and returned it. I still wonder if it was real lol. I have a video of it on my channel to see if anyone knew but never found out if it was or not from others. My damascus patterns wasnt as pretty and it appeared the tang was cleaned somewhat recently tho. I still wonder tho... I learned i didnt know enough to be buying anymore soon tho lol
@nielgregory1084 ай бұрын
The first 5 seconds, what did you say??
@johnmcguigan67173 жыл бұрын
Sick
@maakjar2 жыл бұрын
Wow that price is incredible
@sonnykane45953 жыл бұрын
I want one of these swords
@mahmoudlachmi4445
3 жыл бұрын
You may have one if you fork out $100k
@dennishein28123 жыл бұрын
Beautiful!
@flyfin1083 жыл бұрын
flock allready gone scent of tea and passerine one we missed guided the way
@iganpparamarta88133 жыл бұрын
Adamantium katana would be sick!
@jefffaulkner45763 жыл бұрын
My grandmother died at the age of 93. I thought she was old.
@vincentsangalang81203 жыл бұрын
i feel like if people buy tamahagane katana of course its gonna be expensive but if you buy 1095 clay tempered or kobuse tempered katana that be a good choice cause 1095 is better then tamagane cause when you fold tamahagane it turns in to 1080 high carbon steel
@hyfy-tr2jy
2 жыл бұрын
you do realize that people buy these swords for the craftsmanship way way way more than the metallurgy right?
@captainr.s.chapin89303 жыл бұрын
Mine looks just like it. But it was 90$
@6omega23 жыл бұрын
So that one sword was a "triple header," eh?
@keirankainth Жыл бұрын
Why was the sword shortened?
@prabshiro
7 ай бұрын
Regulations by the Tokugawa government. Also for battle reasons. Ie infantry. Also gift giving, where they had to shorten the sword.
@soniadeguzman7903 жыл бұрын
Craftsmanship is great
@jerrydonquixote59272 жыл бұрын
Nobody knows steel like the Japanese, it's more than an art, is a religion!
@visionboxed3 жыл бұрын
do not talk in the direction of the blade because the spiting can cause rust.... only one rule handling a japanese sword....
@Nikolay_Kashnik3 жыл бұрын
👍
@mageofsin3 жыл бұрын
Great vid
@ducontra6669993 жыл бұрын
i don't get the meaning of this kind of "test" how many bodies can cut.. its a much more matter of strength on the arms and tecnic than actual quality of the blade. (I'm not saying the same can be done with just any steel bar that has been sharpened)
@jkc38973 жыл бұрын
pleesh tel mee abowt yoo fwee shwords😖
@fettmaneiii44393 жыл бұрын
lol the guy points out the missing gold while explaining dovetails. his gold fell out cuz it wasnt dovetailed
@fettmaneiii4439
3 жыл бұрын
okay okay.. the part where he says the imperfections on the tang are from a sword strike... yeah this guy is a complete idiot lol. And the "looseness in the grain" structure (whatever that means) was caused by polishing? nope. Man I love this. The person filming who runs this channel must have been biting his tongue hahah! good on him for keeping his focus!
@brianpeck4035
3 жыл бұрын
@@fettmaneiii4439 You must be an expert on the subject. I've gone to Nihonto shows and studied and all I can say is his explanations seemed reasonable and insightful. I can imagine a chunk of metal shaved off as the owner lost his hands. If you don't buy the sword strike theory then how do you explain the missing metal? Baka desu ne?
@Perun777773 жыл бұрын
Hello KRATOS!😉
@deweywallace63143 жыл бұрын
Nothing better than a little sword porn to make the day wonderful!
@Vaterunser904 Жыл бұрын
Bonito bonito
@victabeer39603 жыл бұрын
I've seen a video of the sword makers tedious job of obtaining a special lump of steel then bashing and folding . No mention of body cutting tests . That's messed up . Cheers
@brianpeck4035
3 жыл бұрын
Seems reasonable. I'm going into battle, not a duel , and I'm tired of blades that are getting bent and broken...damn inconvenient in the moment. Different quality blades are like different caliber guns in a way; as far as their power and what cuts they can achieve but not in what cuts and parries they can withstand or how obvious there ability is. I think the "rolling wheels" or cutting through both hips is rated hardest to cut.
Пікірлер: 206
Not sure how youtube got me here.... but it's really cool to see the craftsmanship that went into making these weapons.
this guy was so knowledgable!! we need more
@nivesknight
3 жыл бұрын
He did mess up.... it is a lower not higher carbon steel in the center. As well as that doesn't look like battle damage. It looks like rust damage. It was probably restored and then sold.
That was awesome. Amazing swords. Thanks for sharing. As always it’s a pleasure to watch pal thanks again for taking us along
Many people do not believe these swords can cut through 3 bodies. What they fail to realize is a Japanese man in the 1600s was way thinner and smaller than a modern man. Much much smaller.
@micahcampa
3 жыл бұрын
yea like 5ft
@joejones9520
Жыл бұрын
humans at that time were roughly the same size and proportions of the contemporary GI Joe action figure doll.
@shaggyrumplenutz1610
Жыл бұрын
They were usually cutting through the spinal column under the ribcage and the flesh around it.
@tobiasbodenburg4264
7 ай бұрын
@@joejones9520😂
I've met Bill at militaria shows before. Very reasonable guy and really knows his stuff.
Those swords demand respect thanks for sharing
As a modern metal worker the level of perfection is astounding when you know this blade was made without any powered tools !
@elyanae9588
2 жыл бұрын
As all blades were made in the ancient times?
@jamiedalton2623
2 жыл бұрын
@@elyanae9588 Yes, there weren't any power tools until the industrial revolution
@war.neverchanges
2 жыл бұрын
@@elyanae9588 💀
Fantastic video! Thank you very much. What amazing pieces of Art. Also very nice to hear all the details from this gentleman, I’ve learned a lot. The close up of the steel is simply stunning, what craftmanship!
Incredible engineering. When you think of what Japanese swordsmiths were doing with raw materials of dubious quality and with primitive equipment, it is just absolutely incredible to see the stunning products they turned out.
@MrJamesschro
4 ай бұрын
The tools being used were definitely not primitive
Great video! Amazing information, and history, on such incredible swords!
@larryhammer1784
3 жыл бұрын
Weep
Thank you guys for sharing that! Cool information.
Those blades are just beautiful! Blows my mind how old they are!
@micahcampa
3 жыл бұрын
there is alot of swords like them there not rare but they are if you go after certin smiths and depending on their ranking
That Norishige sword is unbelievable, the steel has a striking resemblance to wootz and that hamon & polish are fantastic!
My father bought a samurai sword from an estate sale. The widow sold two guns and the sword to him for $100. He had them appraised. The sword was made in the mid-to-late 19th century and was worth roughly $10k. He sold it for $7k cash at a gun show to someone who acquires “national treasures” on behalf of Japan. I held it once and was amazed at how heavy and dense it was. The amount of strength required to handle a blade that heavy is impressive.
@90iatros
2 жыл бұрын
Heavy? It has roughly 1-1.5 kg...
@notatheist
2 жыл бұрын
@@90iatros It was definitely heavier than 1-1.5kg. It was heavy enough that the idea of swinging it in combat amazes me, and doing so is an impressive show of strength.
@Militarycollector
Жыл бұрын
So in other words during her time of sorrow he ripped her off..👎
@hangten1904
Жыл бұрын
@@Militarycollector My reading comprehension suggests he didn’t know what they’re worth when he bought it until he got them appraised. The widow ripped herself off for selling everything at bargain price at an estate sale.
@beefcakesfat2310
6 ай бұрын
@notatheist why would it be so heavy. That doesn't make any sense at all if it was a genuine kitana worth 10k. Kitana including the ones this guy is showing are not heavy
Excellent review. He certainly knows what he is looking at. I have always wanted to own art like that but its a bit out of my budget.
Great video! More japanese swords please!!!!
Bill has incredible knowledge and a great guy all round. Still hope to go do some goldpanning and prospecting with him in Colorado.
@Bill-wm7tt
3 жыл бұрын
It seems like every time I'm in MT, WY or CO The places to pan or prospect are closed. I usually go fishing though. Send me an email! Bill
Beautiful norishige, you have a great piece!
Great swords thanks for the video it was pretty cool.
Great info! What hoping to hear some ballpark prices for these amazing blades.
@cornholius
2 жыл бұрын
Anywhere from $100 to $100,000 depending on who is doing the gouging.
His knowledge with Katanas is amazing and those blades are gorgeous. If I owned those they’d be under lock and key definitely not appreciated like they should be
He explained it pretty well. I really appreciate it.
Don't know this KZread channel or the narrator of the video but I have met Bill multiple times over the years at shows and he is very knowledgeable about Japanese swords.
Wow! Tremendously beautiful swords!
Amazing! Unbelievable something can survive that long and look like that !
@gunfisher4661
3 жыл бұрын
No doubt the skill and workmanship that went into them was above awesome and no doubt may have been very expensive then witch leaves the question did the sword smiths get paid well or was it a godly thing to produce a sword like that.
The top one cut through three bodies clean. He who lives by the sword dies by the sword
It seemed like bill was going to tell us what the other sword was worth which is what I was waiting for but dude interrupted him. I was like come on man. Lol still awesome video really cool.
World class fabulous blades, thank you for sharing.
Again excellent work, stay safe friend love n peace ,Carl fishburn co Durham uk
Nice, I learned something.
keep up the good work
It’s a Piece of Art before it’s a weapon !
@Divine_Serpent_Geh
3 жыл бұрын
While they are great works of art, it’s a weapon for killing first and foremost.
@dennylui
3 жыл бұрын
Absolutely Yes! Compared with the gun.
@paultuerena
3 жыл бұрын
I’d happily hang one on my wall as they are pretty, but as a weapon I’d take a good European longsword as a weapon first
Fascinating. I only have a Japanese ww2 Police Saber that I bought years ago.
These cutting tests were done using extra-long reinforced grips effectively turning them into polearms. The main purpose was to see that they wouldn't crack or warp easily under stress.
This guy's knowledge is world class. He's trying to be humble too.
Those two swords are exquistily beautiful, true priceless pieces! Congrats on owning them! 😃👍🏻
Beautiful blades 😍🤩
You guys are amazing. Beutifull items.
Would love to own one of those.
I would have liked to hear about the Gunto.
Does Fredericks Swords still deal in japanese swords? Think he was out of Illinois thank you
Very surprised to see him handle the blades with bare hands and then not immediately wipe them off as well Bare skin has acids and oils in the sweat that can leave permanent damage
@DLKY80
3 жыл бұрын
For Japanese swords, its ok to handle the nakago (tang) of the blade with your hands since it is already patinated. Gloves are actually not recommend since it might cause the slippage and also damage the patina if it is rough
12:45 Fun fact: the actual words are different, but Kanji basically is Hanzi (basically means "Chinese Characters". There isn't literalization cuz the character Zi is roughly akin to "existence" but Hanzi translates to Han writing, Han being a primary ethnic group in China. At least the group that primary handled the government administration). So, in Mandarin (the pronunciation of the characters), those characters are Tai Dao. Tai means great, highest or exalted (just like ta) and Dao is knife (in this pronunciation. The Dao in Daoism is a different character, don't confuse them). So "great knife", meaning "sword". Same characters. Same meaning. Different pronunciation. Because I can read and write some Mandarin (once doesn't technically WRITE Mandarin. Mandarin is just the pronunciation of the characters), I can muddle along when reading Kanji, though there are pitfalls. Mandarin is a really old language, so there are a lot of idioms that you sort of need to know the fable to understand. Just like in American English (but WAY older). The word "skrill" in American English is probably not going to make sense, like the phrase 杀鸡儆猴 (Shā jī jǐng hóu): Kill the Chicken to scare the Monkey (means to make an example out of someone [in order to keep the rest "in line"])
absolutly remarkable
Fantastic blades. Can you imagine how many of these were brought home as souvenirs and given to kids, running around chopping trees and stuff. Little did they know they were destroying thousands of dollars 😳
how long do width of motohaba and sakihaba of those katanas?
Indeed works of art 👍🇬🇧
Does anyone know the name of the woodblock print in the video, thanks
Those swords are incredible. I don't think there would be many European swords of that vintage that look that good. You could never OWN a sword like that, only be its curator.
@paultuerena
3 жыл бұрын
Only because European swords evolved so old swords were retired. European swords were made just as well. Japanese swords were only made that way to make up for the crap steel they had
@micahcampa
3 жыл бұрын
@@paultuerena the japanese steel was just as good as the european steel
@paultuerena
3 жыл бұрын
@@micahcampa Do some research
@micahcampa
3 жыл бұрын
@@paultuerena i did i have talked to multiple smiths and japanese smiths they say the same thing
@paultuerena
3 жыл бұрын
@@micahcampa Research... as in read some scientific papers, they say different. But you have your opinion that Japanese swords are special so you won’t lol
Blades are beautiful ❤️
impressive
Send them to Lynn Thompson for some more cutting tests.
Good video
Did they say the prices? I think I missed it.
“RAIDEN” Kaneshige, Kanetsune, Hojoji Masateru w/ three separate cut tests. Named Raiden (God of thunder and lightening) published Shinto taikan. Nagasa 72.8 cm. With old sayagaki by Dr Sato Kanzan sensei. NBTHK Juyo Token (Important Sword) Kazusa (no) Suke Kaneshige; Kanetsune; and Hojoji Masateru Katana - tempered steel, gold inlaid inscriptions Mei, Omote: Raiden (Kinzogan) / Kazusa (no) Suke Kaneshige / Tsuji Sukekuro Kanetsune (inscribed) Mei, Ura: Mitsudo / Futatsudo / Suri Tsuki To / Tsugo Mitabi Kiriotoshi (Kinzogan) / Echizen (no) Kami Hojoji Tachibana Masateru (inscribed) 17th Century Cutting edge length: 28 5/8 in. (72.8 cm)
Does Mark Felton know your using his theme song?😉
Ooooooo billy. My favorite Minnesotan
@Bill-wm7tt
3 жыл бұрын
Its Minnesoootin!
Betting that guy never goes anywhere without band aids...
@dennishein2812
3 жыл бұрын
More like tourniquets.
@micahcampa
3 жыл бұрын
it is really hard to cut your self on these swords i have only got cut once in my 8 years of collecting
My God these are beautiful! I would love to own one, how much would it cost me?
@oneway4667
3 жыл бұрын
Not a expert by any means but I’m sure 20k plus easily but if I had to guess I would say in the 60k range they are very old
@jasondutchman6736
3 жыл бұрын
He said in the video that the older one sold for $100,000 and the one with the cutting tests $90,000. A less prestigious one(not signed or from a lesser known smith) from the Edo period might set you back $4,000 - $10,000 + in full furniture. A similar sword in shirasaya like these, you could get for less. A WWII sword, while still a perfectly functional sword but machine made might cost you $600 - a few thousand if really nice.
@Meloncholymadness
3 жыл бұрын
@@jasondutchman6736 See, i want a functional. real sword. I simply can't afford history at the moment, though hopefully one day... :)
Woe cool stuff
Very interesting and amazing that something is that old and is in fabulous condition very interesting guy great video
@micahcampa
3 жыл бұрын
alot of japanese swords are in this condition
Well @3:40 sounds like he was trying to pronounce Masamune the Legendary Japanese Blacksmith. Wow amazing 😮
Didn't they carry gold in the handles?
Those swords have the samurai souls still in them. And the souls of all they killed forever in battle.
Will you talk more about the early Type 94 with pinned Kabutogane?
@militariacollectablesbelgium
3 жыл бұрын
Yes!!
@Bill-wm7tt
3 жыл бұрын
The Gunto could be a type 94 that the 2nd hanger was removed before putting on the leather combat cover but technically the type 94's have 2 hangers. The blade in this mount was made by Gassan Sadakazu and is dated 1901. We did a video on it but I forgot my Mekugi-nuki to remove the peg :(.
@Bill-wm7tt
3 жыл бұрын
@@militariacollectablesbelgium The blase is a Gassan Sadakazu,
@BACCHUS777
3 жыл бұрын
Hi Bill there is a thread on the NMB about Pinned Kabutogane on Type 94, they are consistent with very early production of the Type 94. I have a few examples myself.
400 year old sword named White Lightning. I dread the day when some idiot calls that sword racist.
Is this sword available for purchase?
Mortal Kombat “Test Your Might” prisoner execution challenge
@obeastness
3 жыл бұрын
when he says "they named this blade white lightning" and he points to the kanji, it actually says 「雷電」Raiden, not sure where he got the translation of white lightning from.
3:40 , 越前守法城寺橘正照 is read as Echizen no kami hojoji tachibana masateru. 辻上総介兼重 is Tsuji kazusa no suke kaneshige. 九郎兼常 is Kuro kanetune.
An expert who can not read japanese ! made my day. By the way it is Kanetsune not tsuna. And yea !!!!!!!!! The expert says the nagashi, the drawn lines by the polisher are no signature. Nonsens, of corse they are. This by example is the sign of an togi of the honámi school. An again the "expert" norishige uses sanmai or kobuse construction for blades. holy shit, this is an evention nearly 100 years later.....
Wow, this is a fantastic video!
The shape of that sword from 1600s is needing researched desperately. Because a inlay of some names and cut test in gold does not authenticate . I’ve seen forgeries almost fool some of the best appraisers in the world. Further information is required possibly even a carbon dating as there’s very good swordsmithsthat specialize in reproductions down to the wear and damage. I hope those are authentic for they would be some of the best representatives of ancient Japanese steel I have seen not in the possession of Japanese owners or descendants .
YES
They would say its Battle torn to raise the price 🤣
very interesting. thanks
Man i had bought one that id swear looked just like this nearly. I was told on a sword forum it was fake and returned it. I still wonder if it was real lol. I have a video of it on my channel to see if anyone knew but never found out if it was or not from others. My damascus patterns wasnt as pretty and it appeared the tang was cleaned somewhat recently tho. I still wonder tho... I learned i didnt know enough to be buying anymore soon tho lol
The first 5 seconds, what did you say??
Sick
Wow that price is incredible
I want one of these swords
@mahmoudlachmi4445
3 жыл бұрын
You may have one if you fork out $100k
Beautiful!
flock allready gone scent of tea and passerine one we missed guided the way
Adamantium katana would be sick!
My grandmother died at the age of 93. I thought she was old.
i feel like if people buy tamahagane katana of course its gonna be expensive but if you buy 1095 clay tempered or kobuse tempered katana that be a good choice cause 1095 is better then tamagane cause when you fold tamahagane it turns in to 1080 high carbon steel
@hyfy-tr2jy
2 жыл бұрын
you do realize that people buy these swords for the craftsmanship way way way more than the metallurgy right?
Mine looks just like it. But it was 90$
So that one sword was a "triple header," eh?
Why was the sword shortened?
@prabshiro
7 ай бұрын
Regulations by the Tokugawa government. Also for battle reasons. Ie infantry. Also gift giving, where they had to shorten the sword.
Craftsmanship is great
Nobody knows steel like the Japanese, it's more than an art, is a religion!
do not talk in the direction of the blade because the spiting can cause rust.... only one rule handling a japanese sword....
👍
Great vid
i don't get the meaning of this kind of "test" how many bodies can cut.. its a much more matter of strength on the arms and tecnic than actual quality of the blade. (I'm not saying the same can be done with just any steel bar that has been sharpened)
pleesh tel mee abowt yoo fwee shwords😖
lol the guy points out the missing gold while explaining dovetails. his gold fell out cuz it wasnt dovetailed
@fettmaneiii4439
3 жыл бұрын
okay okay.. the part where he says the imperfections on the tang are from a sword strike... yeah this guy is a complete idiot lol. And the "looseness in the grain" structure (whatever that means) was caused by polishing? nope. Man I love this. The person filming who runs this channel must have been biting his tongue hahah! good on him for keeping his focus!
@brianpeck4035
3 жыл бұрын
@@fettmaneiii4439 You must be an expert on the subject. I've gone to Nihonto shows and studied and all I can say is his explanations seemed reasonable and insightful. I can imagine a chunk of metal shaved off as the owner lost his hands. If you don't buy the sword strike theory then how do you explain the missing metal? Baka desu ne?
Hello KRATOS!😉
Nothing better than a little sword porn to make the day wonderful!
Bonito bonito
I've seen a video of the sword makers tedious job of obtaining a special lump of steel then bashing and folding . No mention of body cutting tests . That's messed up . Cheers
@brianpeck4035
3 жыл бұрын
Seems reasonable. I'm going into battle, not a duel , and I'm tired of blades that are getting bent and broken...damn inconvenient in the moment. Different quality blades are like different caliber guns in a way; as far as their power and what cuts they can achieve but not in what cuts and parries they can withstand or how obvious there ability is. I think the "rolling wheels" or cutting through both hips is rated hardest to cut.