Best paintball channel. 🙌

@PaintballRuinedMyLife

7 жыл бұрын

Thanks! Im trying at least :)

@JoeGanja

7 жыл бұрын

Paintball Ruined My Life that's all that matters. We appreciate it.

I've been using 3 in 1 oil on poppet guns for years. Never had a problem. The 33 is my favorite grease for my gtek. Both are very affordable and last an incredibly long time.

Before storing for off season should use grease ur o rings so they don't dry up and crack or well they be OK till next season

@michaelcannizzo1076

3 жыл бұрын

I have a Dye Reflex 11 - last time I played was 2013 so I cleaned and greased my gun before storing not knowing that was the last time I would have a chance to go. Fast forward to this year 2021 and my nephew is old enough to go now. I pulled my Reflex and other Dye guns out inspected the bolt, aired it up and went to town like I just played the week before. Point is the Dye slick lube (pretty sure it's Dow 33) was perfect after 8 years. My spyder "emergency" and friend markers had all their o-rings blasted to bits. All 3 spyders I had needed 100% rebuilds as their lube is more an oil

Oil is recommended on those Bob Long bolt head orings

thanks man i appreciate what you do your vids youre hella helpful. and laughs to keep it up.

Only use the best. Super Lube. Their multi-purpose synthetic grease and oils are the best for orings and paintball in general. It protects orings from friction damage and make them last longer if using co2. If you're using a mech marker that has some metal internals the oil also prevents oxidation of parts. I even use a little bit on barrel and asa threads to prevent them from damage or getting seized up.

How often should you break down and clean your marker ?

You deserve a million subs you are the best

Back to waiting on the live stream now!! I look forward to all the videos you make. Lots of good content keep up the good work Brad.

Great stuff as always Brad. Never stop making wild arm gestures

@PaintballRuinedMyLife

7 жыл бұрын

Hahaha will do :) Some day I'm going to knock something over though

New to paintball, I've been watching a lot of these videos from this channel, very informative, dropped a sub and a like.

Question, DOW 33 sells commonly in two forms, light and medium. Any major differences to look out for? Is one more preferred than the other?

@PaintballRuinedMyLife

7 жыл бұрын

Yeah though about that after I edited this one. Medium is what I always use, it is also what Eclipse and GoG ship.

When I used to play with a DM5, I greased it after each day. But if you put in too much grease, it leaked... Now with my Geos I grease them every five cases or so. Modern spoolies are just way more reliable than they used to be. The GTek runs with peanut butter in a pinch (not recommended)!

you should do one about oil to the other end of the spectrum

Just FYI... You links at the end of the video are not showing up.

Ultra slick

i have a d3fy sport conquest how much of any grease should i put on that

Can you put lubricate to coat paintball balls? Few drops and shake them in bag to get covered around.

Hey bro the guy at the shop sold me a Etha 3M and told me I should clean/re-lube after around 5,000 shots. I went out a week ago shot about 2,500 balls and just cleaned outside of the gun and inside the detents. I pulled the bolt and it was still lubed and did not look dirty with any debri/dirt. Im going out again in a week and am wondering if you think I should clean and re grease before going back out? Or you think I will be fine.

Another good informative vid keep it going Brad 👌

Can you use synthetic

So I have a spider victor what grease do you Recommend or is it even necessary to grease it up

I just got a mini gs and im wondering if i should grease the bolt before i use it for the first time? Also would it be okay just to grease the o rings on my mini gs bolt like you did in the video?

@ashravenpb

7 жыл бұрын

it should already be lubed. Most manufacturers lube the orings before the markers are put into storage to preserve the them

Should i use hatersauce on my gtek? I know there is other greases too just have heard good thing about it

Sup!! my Tippmann Cronus came with very thin oil, and of course the bolt is not removable, but the manual recommends for oil to be applied onto the needle valve of the CO2 tank, so that the oil will be 'sprayed' thru the chamber and arround the bolt...this seems a little odd to me, what do you think? I love this gun...it just shoots! so I'm not too worried about it. thanks for the great videos!

@PaintballRuinedMyLife

7 жыл бұрын

With the Tippmann styles guns, I normally tell people put 3 drops in the ASA (where you screw the tank in) and shoot the gun. Really all you need to do with those guns.

Can you please do a tippman gryphon review

What would be the difference between using oil and grease?

I like lurker lube and the empire lube

What should I grease/lube on my valken code?

I never put lube on the bolts front o ring. It touches nothing and it shoots down the barrel.

@PaintballRuinedMyLife

5 жыл бұрын

Yeah I do it, mainly so the o-ring does not dry out and stays fresh.

This obviously isn't the video to ask this type of question but what do you think about a Dangerous Power G5?

@ashravenpb

7 жыл бұрын

feels good in the hands, but doesn't shoot as smooth as the gs and there aren't any bolt upgrades for it. Plus all the o-rings are in the body so they are a real pain to replace. So if you want something that can shoot quickly and feels like a high end then it'll be a great gun for you.

So I have to put grease on all the rings I can find? And do all the bob longs require the same amount of grease because I have a insight NG and I wanna be as careful as possible with it

You way over lubed that gtek bolt

@CaliforniaTravelVideos

5 жыл бұрын

My feeling as well but it's hard to argue with Brad's assertion that the factory seems to do about the same. Then again, I suspect their workers are in a hurry and figure the owner won't do a lube job for some time.

What type of oil would you recommend for an Azodin Kaos 2

What do you think about graphite Greece

@PaintballRuinedMyLife

4 жыл бұрын

Grease with graphite is going to be abrasive I wouldn't use it. Greece is beautiful though. 😃

You can still use something like gog grease on a poppet gun like a lv 1.5? å

could explain the difference between the G-tek and E-tek I tend to get confused quite often (if you explained it on one of your live streams plz lemme know which one)

@jameshockeyyy

7 жыл бұрын

The Gtek is a spool valve marker, so an enclosed bolt system. The Etek in the other hand is a poppet valve marker, where the bolt is part visible, they shoot a little differently but overall I prefer the Gtek, I own one and it's amazing.

what is good on a poppet valve ram?

what is better eclipse dyo 33 or real dyo 33 i think i spelled it wrong

So Dow Corning grease is the one to get

So if I use PAM for my marker, should I re-apply at the field??

@cookieofdestruction

7 жыл бұрын

Re-apply between matches. Just to be safe

@ashravenpb

7 жыл бұрын

I find peanut butter works best for the gamma core.

@immortalfigs1178

7 жыл бұрын

SSniper14 PB I agree it worked out for the madman

@InstructorAnthony

7 жыл бұрын

I put a dab of Nutella in the air fill nipper of my tank before each day of play.

@immortalfigs1178

7 жыл бұрын

Anthony Armando good idea will save your threads and taste delicious what do you you use to lube your reg I personally use mayo

MAN! I have been using way less than that. I put on so little that its just slightly shiny. Like even questionable if I even applied any. I guess I was wrong.

@PaintballRuinedMyLife

7 жыл бұрын

If it has been working for you, keep doing what you're doing. The amount of grease is really going to be dependent or the type of grease and gun. You may try applying to more though just to see if the gun shoots any different.

@AllenJun

7 жыл бұрын

Yeah I'm shooting an RSX with their grease. Ill put more on just to be safe. My orings havent been burning yet.

What about for pumps

i do not know if eclipse does ant thing to them

What are your thoughts on a dangerous power G5?

@PaintballRuinedMyLife

7 жыл бұрын

Negatively. I'm not a huge fan of Dangerous Power.

how do i put in gresse

Hey there :), What if i only use gold cup paintball oil and not grease. Will it damage my gun or do i need to use grease? Thanks :))

@PaintballRuinedMyLife

6 жыл бұрын

Going to depend of the type of gun

I have 300 $ to but what paintballgun should i get .. can you give me like a top 5 guns under 300

@PaintballRuinedMyLife

7 жыл бұрын

Empire Mini GS for sure.

What about sending oil through the gun? Can we get a video of that?

@ashravenpb

7 жыл бұрын

only on unregulated stbb guns (spyder/azodins without regulators)

@crash86ed

7 жыл бұрын

Eh plenty of other markers use this method, just depends on how the guns were designed. AKALP markers use oil exclusively, no grease even in the solenoid.

not necessary to put a couple drops of oil into the regulator ? just grease the bolt?

@maxxon99

7 жыл бұрын

Don't put oil into the reg in an electro! It can collect into the solenoid and gum it up.

@PaintballRuinedMyLife

7 жыл бұрын

Really matters the guns, with the Gtek and Victor in the video, oil is bad. It ends up going into the solenoid and the solenoids are not designed to take the liquid. On regulators you should also be using grease, but they only need fresh grease every 40k shots of so.

@crash86ed

7 жыл бұрын

@Paintball Ruined My Life like you say it does depend on the gun and the solenoid exclusively. AKA excaliburs and vikings used oil exclusively for the entire marker and MAC or humphrey solenoid(s). Right into the ASA, just like an automag, tippmann, etc. The concern with most of them these days is probably that the oil will actually degrade the grease, and once the oil is used up the solenoid would be insufficiently lubricated.

Did anyone else hear alot of voice cracks? Suscribed and liked😂

do pop valve markers use the same amount of grease

@PaintballRuinedMyLife

6 жыл бұрын

Most of the time not, most of the pop-valve guns don't require grease.

Should I use a lot of grease on my RSX?

@PaintballRuinedMyLife

5 жыл бұрын

Just keep close to what I used in this video, maybe a bit less. Its not super critical the amount, just not a crazy amount or none.

Love your videos! Quick question. If I put a little too much grease and there is a little bit of a film in the barrel, do I just use a barrel maid to clean it and keep playing or do I need to stop and wipe off and re-grease?

@ashravenpb

7 жыл бұрын

clean the barrel with a barrel maid. Then when you get home just soak the barrel/pods/swab in warm soapy water let them dry, then run your clean, dry barrel maid through it again.

IMO your lubing the bolt too much. Your O-rings should be shiny , but you shouldn't be able to see any lube on it. When you use that much lube then you end up shooting it out the barrel, which is almost as bad as a barrel break. So unless you fire a few shots through it then clean the barrel I would recommend using less lube.

@PaintballRuinedMyLife

7 жыл бұрын

Either way is probably, fine. Taking apart guns from the manufacturers, they all use about as much grease as I did. I don't think I have every experiences so much grease in a gun that it ends up in the barrel and starts shooting all wonky.

@ashravenpb

7 жыл бұрын

My friend overlubed his gog enmey and it coated the barrel in lube, although i've never had it happen to me.

@bhacker15gm

5 жыл бұрын

The factory adds alot of lube because they dont know how long the marker will sit before its bought and used. Also never lube the front oring on the bolt. It doesn't seal and it will spray lube down the barrel.

About to pick up a Gtek. would you recommend it?

@PaintballRuinedMyLife

7 жыл бұрын

Yep for sure. Love them, one of the best guns on the market!

nice

#PQT Do all paintball guns need grease? I have a Tippmann Gryphon and it didn't come with any so I was curious. Thanks!

@PaintballRuinedMyLife

7 жыл бұрын

Not all need grease. With the Gryphon you should use oil, it should have come with a little bit.

@brycecarver8038

7 жыл бұрын

Thanks! It came with a little bit of oil. I was just curious.

#pbqt Hey Brad, I got a tube of Hater sauce and I’m running out of PE grease for my CS2. Can I use the Hater Sauce if I lube more frequently or should I only use PE grease for a CS2? Thank you!

@lifeisonlyoptional2215

4 жыл бұрын

Maher Boutari from what he said, PE grease is just Dow 33. Buy a tube of that and you'll be fine. Yep, PE grease is a medium weight Dow 33. I know that's not what you asked, but that's all I can tell you with my knowledge. I have a PE too, and would just stick with the same type of lube/grease because that's what it's been designed/optimized to run

What is your opinion on the proto reflex rail 2014?

@xTheBossRules

7 жыл бұрын

Jack Meoff Use to be a tournament gun

@ptraides8223

7 жыл бұрын

Jack Meoff I have one and it's great

I have an azodin kaos does it need a lot of grease

@ashravenpb

7 жыл бұрын

Just use a little bit of lube on the striker o-ring and a drop of paintball gun oil in the asa

@PaintballRuinedMyLife

7 жыл бұрын

Yep :)

Best paintball channl😍😍😎🖒🖒🖒🖓💣💣💣💥💛

What's the best gun I can buy from 200$ to 320$

@jimmydeansausageeater7495

7 жыл бұрын

itZ Savage Mini gs, etha 2, used Gtek

no lube in the shutoff?

@PaintballRuinedMyLife

7 жыл бұрын

Yeah at some point, but not for regular/basic maintenance. It is a good idea to grease all the o-rings at around 80,000 shots.

Supreme Hat 🕐🔥

What's the best gun that's 800 and below

@PaintballRuinedMyLife

7 жыл бұрын

+JulianBarona I'd say Gtek 160R

@julianbarona317

7 жыл бұрын

So it's better than the HK shower

@julianbarona317

7 жыл бұрын

How do you get free stuff ? Is it because of KZread or what ?

@JackieTheDoe

7 жыл бұрын

he is owns a paintball store so i guess he uses some of his stock or his own collection

good riddance mike philips.. welcome PBRML

@CanadaLimited187

7 жыл бұрын

why so much hate on my boy Phillips, had a lot of fun watching some of his vids

@JackieTheDoe

7 жыл бұрын

he owned a website called marker bids that went out of business and he owed tons of gear to alot of people for a long time

@miker7032

7 жыл бұрын

And he eventually made it right. He fucked up, but he did what he could to make up for it.

@MuadDiiib

7 жыл бұрын

+gcwolf1 he made up for it dipshit

@MuadDiiib

7 жыл бұрын

he's been saying that long before his website went out of business. and he's right, not just his, yourpbfriend, and even hustlepaintball. it is dying, he wasn't wrong. btw if he wasnt trustworthy, then why did he give what was ode to those people? sounds like a man of his word to me, but whatever

#pbqt can u use grease on an autococker

@PaintballRuinedMyLife

7 жыл бұрын

Yeah, but you probably only need to if you are disassembling and reassembling.

@cavemanspaintball2276

7 жыл бұрын

Paintball Ruined My Life sweet thanks for the reply

##%%%€£££¥!!!! Brad!!!! CAN YOU PLEASE DO A HOW TO ADJUST YOUR HPR TO LOW PRESSURE VIDEO .... thank you sir

2:44 “thin coat”

189 likes and 0 dislikes wow impressive

Did you just put dow 33 on a bob gun? D:

@PaintballRuinedMyLife

7 жыл бұрын

Yep

@crash86ed

7 жыл бұрын

33 is what the BL spoolies use. Intimidator series uses 55.

So, whose Ripper?

I got a new gtek for 400 dollars!

still got the ripper? Hahaha

You don't deserve to hold a ripper like that..... I'm just being jealous

first!!!!

first dislike!! jk